Request yellow when no data for one Info cube.

Hi all,
We have been doing delta load from 0FiAR_o06 to cube 0FIAR_C02 , but since a couple of days we have been getting request status yellow in the info cube when no data .. I have checke the settings in infopackage , it is the same for other info cubes in which the request gets green automatically when no data . This problem exists for this cube only.
I have done RSRV and fact table recreate also but no luck so far ..
Please help as it is pruduction issue..
Regards,
Akash..

Hi
Only the Requests that doesnot have data is updated with Yellow Request right, means the whenever the yellow request it could not pull the data.
You need to recheck the Table Space / Back Ground memory / and Short dump.
Try to analyse the Yellow request at Job Process / SM37
Try to raise a Ticket with BASIS Guys for system refresh.
Hope it helps and clear

Similar Messages

My wife and i share a computer. when she looks for her info in mycloud my info appears in her account.

my wife and i share a computer. when she looks for her info in her cloud acct on the desktop my info appears in her account. Cannot understand why her info from her phone would appear to be nowhere and mine is in her account. Help us understand this please?

On the shared computer click on System Preferences -> iCloud -> Account Details verify that each individual account is configured correctly. By default, the Apple ID used to install the computer the first time is used for all accounts on the computer, unless it is changed.
Please start here - http://www.apple.com/support/icloud/account/
This might also be helpful - http://www.ilounge.com/index.php/articles/comments/syncing-multiple-icloud-data- with-a-family-mac/

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

No delta's for DTP from master data object to Info Cube

Hello,
I have a DTP process that updates records from master data attributes to Info cube.
Here i am not able to schedule a DTP in delta mode. The option appears in display mode.
Even though when i tried deleting the FULL update DTP and created a new DTP, the delta option is in display mode. i have deleted all requests from my info cube.
Any idea or solution !!
Thanks
Ankur

Ankur,
   If you want load Master Data DELTAs to Cube, you can achive this by introducing a DSO before Master Data Infoobjects.
Assume your Dataflow....
Master Datasource
          |
          |
          |
Master Data Infobjects
          |
          |
          |
      Cube
New Dataflow:
          Master Datasource
                    |
                    |
                    |
          |-------DSO---------|
          |                   |
          |                   |
      Cube      Master Data Infobjects
Hope this helps.
Nagesh Ganisetti.
Assign points if it helps.

User Profile Data for One Month in ST03N

Dear All,
I have one question for a similar requirement.
I want to see the User Profile data for last month (e.g.August)
I navigate through the same path as described by you.
ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
Thanks in advance.
Best Regards,
Jayesh

Dear Shailesh,
Thanks for the very prompt and accurate response.
However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
Kindly advice.
Best Regards,
Jayesh

Delete Transactional data for one (1) Cost element

Hi All.
How to Delete Transactional data for one (1) Cost element?
i know T code OKC3 but it is saying I can delete only at controlling area level,
I want to delete only data (Transactional) for one cost element .
Please let me know, Thank you ,
Paartha,

it is not possible to delete the data, if u want u can repost from one cost element to the another cost element if u are feeling the entry was posted to wrong cost element.
Otherwise if u want restrict the transactions further to that cost element, u can restrict through cost elmenet master where in u can select the direct postings and secondary postings etc.,
regards
madhav

Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.

Hi,
My query is built on multiprovider. The data flow is data source u2013 ODS then ODS u2013 Info cube and multiprovider contains Info cube only.
Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.
The query results are not tie up ODS, Info cube ans Multiprovider(List cube).
Any one let me know why this is happening and how do I resolve it.
Regards,
Sharma.

HI;
thanks for help.
I resolved the issue in my own.
Regards,
Sharma.

Data correction at Info cube

Hi,
For an Info cube, we had done compression, rollup of aggreagates. And, now we had identified wrong data entry for a field from one of the datasources.
How can we correct the information of that filed for the old records without downtime or deleting the complete information of the cube.
Thanks a ton in advance.

Haripriya,
Its a characteristic or keyfigure...?
--> If its a characteristic you can follow one of these 2 options...
1. Create a new datasource and load into CUBE(Do not map any keyfigures...)
2. Loop back from CUBE to same CUBE and write a routine to populate right value for the filed by lookup. In this case also do not map any keyfields.
--> Create export datasource on CUBE and use.
--> If its a keyfigure..
Need to delete data and load, due to addition.
Hope it Helps
Srini

Uploading data in to info cube.

Hi
I am new to APO. I was able to create infocube and all that stuff. but was not able to upload data in to info cube,
Can some one explain me the process of uploading data in to info cube.
Regards
Deepu

HI Deepu
There could a lot of reasons why the data is not getting loaded in the info cube. It all depeds what type of data source is being used to load the data. That is are you trying to load the data through a flat file or you are using another info provider (info cube, ODS, etc) to load the data in your info cube.
For example, if it is a flat file, you may want to check if the format of the file is correct or you could preview the data before you upload the entire file, etc
If you are loading it from an another info provider, then you could first try and load the same in the PSA and see if the data is loaded in the PSA properly.
So if you can describe the error that you are getting while you upload data, it wil be more clearer. Also if you can add a little bit of architecture of what are trying to build, it will be better to give pointers.
In the meantime, the process of uploading data into the info cube is that first you have to create a data source depending upon your source system. Then you may create a info source, transfer structure and communicattion structure. Then you create the info provider (in your case the info cube), then create the update rules and then the info package finally to load the data.
I hope this helps.
Rgds, Sandeep

I am trying to delete the data from the info cube.

Hi All,
i am trying to delete the data from the info cube.in cube reporting symbol is availble.when i click on delete button delete symbol is coming again when i click on refresh button request is not deleting .please give me solution .
Thanks,
chandu

Hi,
Also try to delete in Data Mart Status.
R u deleting particular request or the entire data in cube, if entire data then right click on Cube select Delete Data, it entirely deletes Data.
Hope it helps you...Let us know if you still have any issues.
Reg
Pra

Error 3, when loading transaction data into an info cube from flat file

HI friends,
I have taken 2 dimension info cube. (customer and product dimensions).I loaded master data through direct update by preparing 2 excel sheets seperately for customer and product. For loading transaction data(through flexible update), I prepared single excel sheet covering all values that is master data info objects of customer and product, key figure values and taken 0unit, 0currency,0calday in transfer rules.(in excel sheet)
Once I load the data, the "data was requested" option is appearing and error 3 coming, when I go for monitor to check the data.
sai

Hi Ram,
In Monitor see the error message by clicking on Error message button or
go to details tab and expand the nodes to see which record is having problem.
Regards,
Prakash

Allowing "Reader Users" to Save MULTIPLE Unique Sets of Forms Data for One Form

I own Acrobat Pro X. I use it to create many documents in my law practice. I need to deliver a contract form to a client that the client will use again and again and again... The client only owns Acrobat Reader. I need this to be like a "template" in Microsoft Word. The client needs to be able to fill-in the fillable fields on the document that I have created, then print and save it (e.g. as "Jones.pdf"), then fill it with new data and print and save it again (e.g. as "Smith.pdf"). This process may need to be repeated hundreds or thousands of times. Sometimes the client will need to reopen a document (data set) that was previously saved and printed and see it as it was last printed (so, to load "Jones.pdf" and see it as it was created). Sometimes the client will need to send a "filled" PDF to one of his customers, where the client's customer can print the document, but not change any of the fields (much less the body of the document, of course). So to sum up:
* Attorney creates contract with fillable fields in Acrobat Pro X and sends to client;
* Client uses PDF created by attorney to create, print and save an infinite number of unique 'data sets' for the document, any of which can be opened and printed at any time; and
* Client sends locked-down, un-changeable PDF to Client's customer for customer to print, but not change.
All of this needs to be able to happen without the Client ever buying Acrobat. Is this possible? I'm aware of File > Save As > Reader Extended PDF > Enable Additional Features, but I cannot figure out if this will work, since I don't use Reader on my pc.
Surely this scenario is faced by document creators often. However, I tried and failed to find a set of search terms which would reveal discussion threads that were relevant to this query.

I apologize for being unclear. I'll try to clarify the facts.
1. I have written a custom subcontract agreement for one client. This is the only client that I will ever give this particularl document/subcontract. My client will *never* send the data or the document back to me. Once I turn over this document to my client, it is from my perspective, a one-time, one-way transaction.
2. My client
Will be the only person who will ever put data in the fields (using Acrobat Reader);
Will create hundreds or thousands of unique subcontracts using the document that I have created, but the only difference between each will be the data that my client has put in the fields;
Needs to be able save each unique set of data as a unique pdf (jones_1.pdf; smith_2.pdf; etc.);
Needs to be able to email the completed document to his customer in a way that his customer cannot modify the document, but can view it, print it, sign the paper printout and snail-mail it back.
3. My client's customer
Should be able to view and print, but be unable to change anything in the document;
Will not need to sign the document electronically (there will be no digital signatures)
Users of Microsoft Word are familiar with the concempt of templates. When you create a new document based on a template, the content and formatting can be changed in each new iteration made from the template, but the original template is not changed. I could give my client the subcontract as a Word template, but his staff could easily or accidentally change important language that I don't want them to be able to change. For the client's own protection, I want the client only to be able to change data in the fields that I've designated. This sort of scheme is impossible using a Word document or template. I hope it's possible with a PDF.

Dtp error when loading data from one cube to another cube?

hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!

Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards

Need a report column to hold data for one row only

Hey Guys,
I have a report which has a column that links to another page in my APEX application.
There is a requirement where only one of the rows in this report needs to have a link so I need the column to show the page link for one row and one row only.
The report will have about 5 rows at a time so is there a way to just make this link appear for the one row(it will be the top row) in the column attirbute in APEX? or can this be done in the SQL for the report?
Any help is much appreciated
Thanks
-Mark

Hi
The only way (I believe) to do this is within the SQL. Then you just wrap the column in a CASE statement and if it meets your criteria then build up the link and if not then display normally.
Something like this...
SELECT ename,
       CASE WHEN empno = 7839
       THEN '<a href="f?p='||:APP_ID||':4:'||:APP_SESSION||'::NO::P4_TARGET_ITEM:'||empno||'" >'||empno||'</a>'
       ELSE TO_CHAR(empno)
       END empno
FROM empCheers
Ben

How to store call log data for one month?

HI,
I am using iPhone 4S with iOS 7.1.2. I would like to know that is there any setting for storing call log data for latest one month..?

That's not how it works. Recents is limited to exactly 100 calls, not a time frame. If you need your call history for a specific time frame, look on your carrier's website. Most carriers will permit you to login to your account & view call history.

Request yellow when no data for one Info cube.

Similar Messages

Maybe you are looking for