RequestCenter emails not rendering correctly in Outlook 2007

RequestCenter emails not rendering correctly in Outlook 2007
I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007. When I look at the same email in Outlook 2003, the HTML formatting is fine. Here's a picture of the same email displayed in Outlook 2003 and 2007:
When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter. Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
Does anyone know how to fix this?
Thanks,
Scott

We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade). What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies. Not much help, I know.
I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

Similar Messages

HTML Email not rendering correctly

Hi,
Since upgrading to Mountain Lion I've noticed that a number of my HTML based incoming emails are not translating correctly - the text is just showing as graphic characters. None HTML emails are fine - anyone got any ideas?
Regards
Neil

Hi Scott.
In order to solve your problem with relative links to image and css files inside KM I suggest two variants:
1. Replace relative links as I mentioned in this message Re: JavaScript and CSS info in WPC.
2.The second solution is:
a. Create an blank html file inside KM folder where the base.html file is stored.
b. Download the newly created file for local editing.
c. Place an iframe that points to your base html file between <BODY></BODY> tags. Use a following code as an example:
<iframe width="100%" height="100%" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="base.html"></iframe>
d. Upload this file back to KM.
e. Point your KM Document iView to the created html file.
Best regards,
Aliaksandr Zhukau
Edited by: Aliaksandr Zhukau on Dec 3, 2009 11:04 AM

PDF not rendering correctly

Hi
Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
Any ideas how to rectify this?
Is it Adobe related or can I update the settings for the browser? I am using Safari.
Thanks

what OS & Safari version ?
Often, removing any 'pdf' plugins in
/Library/Internet Plug-Ins/
and
~/Library/Internet Plug-Ins/
then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

Email sync with Thunderbird or Outlook 2007

Hey all, I've spent hours on this, so I'm hoping someone can help. I have the Sprint Blackberry Curve, and my laptop O/S is Windows Vista. I'm trying to figure out how (if i can?) to sync my email using the Thunderbird or Outlook 2007 desktop applications and my Curve. Right now I have gmail being sent to either Thunderbird (preferable) or Outlook 07, but I want to be able to reconcile my email on the Curve with the desktop application, not the gmail website. Is this possible? It was easy to do for calendar/contacts. This is personal email, so I do not have access to an enterprise server.
Thank you!

You can do it, but it will cost you a few dollars. Go to http://www.mobical.net and sign up for a free account. It's a full-fledged online PIM, but you can just use the address book if you like. Funambol has a free Thunderbird sync tool that works like a charm, which you can get from http://sourceforge.net/project/downloading.php?group_id=149326&use_mirror=osdn&filename=Funambol-Pim-Plugin-win32-v0.4.5.xpi&53502710. Set it up using the info at https://www.mobical.net/mobical/application/MobicalApplication.html#gwt-faq. Once you've synced your Thunderbird contacts to Mobical, get either the Funambol or Nexthaus SuncML plug-in for your Blackberry, and set it up to sync with Mobical as well. You can get a free trial, after which you have to shell out ~$30 US to buy the plug-in. You can now sync contacts between your BB and Mobical (and other PIM info too if you like).. With the Nexthuas client, you can set up an auto-sync for, say, every 15 minutes (maybe with funambol too, i don't know). So now, you have your Blackberry contacts (+ maybe other data) being wirelessly synced with Mobical every 15 minutes. When you run Thunderbird, you now nice have a nice sync button on your toolbar that you can press whenever you want to sync Thunderbird and vice-versa.
Enjoy!
Message Edited by ez-b on 08-21-2008 11:20 AM
Message Edited by ez-b on 08-21-2008 03:23 PM

'Sorry, Too Many Cards' message NOT rendering correctly

I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
Thanks,
Post relates to: Pre p100eww (Sprint)

lblumen wrote:
Am getting same message. Since new update was downloaded. Also, I am getting the too many cards open message daily, even when no other cards are open
I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

[SOLVED] KDE4.3 is not rendering correctly the images in the desktop

I've posted a bug in KDE because the KDE images are not rendered correctly:
https://bugs.kde.org/show_bug.cgi?id=202829
You can see an image of my desktop at:
https://bugs.kde.org/attachment.cgi?id=35921
As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
http://wiki.archlinux.org/index.php/ATI
I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
Someone with an ATI card has the same problem? Which driver would you suggest to me?
Thank you
Last edited by jjjaime (2009-08-06 19:04:12)

Thank flamelab for your help.
The xf86-video-ati-git:
http://aur.archlinux.org/packages.php?ID=15374
fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
Best regards,
Jaime

Basic Layout not rendering correctly.

''locking as a duplicate of https://support.mozilla.org/en-US/questions/1035123''
Hello,
I've been trying to debug a problem I was noticing on my production websites, so I dumbed it down to a quick codepen to show off the issue. http://codepen.io/anon/pen/GgoBNJ
Basically, standard fonts (helvetica, arial, etc.) are not rendering correctly within a div. For some reason the text is pushing itself up ~2 pixels. Not to mention, fonts are looking very jagged within the browser for no apparent reason.
I am setting up a basic div with hardly any styles and yet this produces two different renderings within FF and Chrome
.box{
font-family: Helvetica, Arial, Sans-serif;
font-size: 14px;
border: 2px solid #FF5500;
display: inline-block;
width: 100px;
This is causing me all sorts of headaches with designers who are trying to make layouts pixel perfect as I have zero control over something like this. Any help would be greatly appreciated!
Thanks in advance.

You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
You can check the font used for selected text in the Font tab in the right pane of the Inspector.
*https://developer.mozilla.org/Tools/Page_Inspector
You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1
You can try different default fonts and temporarily disable website fonts to test the selected default font.
*Tools > Options > Content : Fonts & Colors > Advanced
*[ ] "Allow pages to choose their own fonts, instead of my selections above"

Rollover text not rendering correctly in Safari 7.x

Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix.
This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
Thoughts on how to correct this?
Thanks!

The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
changes to this - note the right edge
But with word-spacing un-checked in Inspector...

Adf application not rendered correctly with url ip and url localhost.

Hi all.
I have a strange problem. When I enter to my adf application deployed in a local stand alone weblogic server with the ip:
http://localhost:7001/Application/faces/index
it renders fine. But when I load it with the url:
http://10.5.14.15:7001/Application/faces/index (private ip), it doesn´t render fine. Tables haven´t the same style, and some elements appear selected like if I have selected them with the mouse.
This problem only happens with internet explorer, not with Chrome.
Also when I see a table inside a region in a jspx, the with of the header of the columns is not rendered correctly, causing the width of the header row not be the same than the other rows.
This problem also happens only with internet explorer.
Any help please?
Internet Explorer 8. JDeveloper 11g.2. Weblogic 10.3.5.0
Also happens with Internet Explorer.
Maybe encoding? doctype?
Thanks

What would the DOCTYPE have to do with the IP address?
Have you looked at the HTML source in the different browsers and tried to debug what's wrong? Sounds like there may be some images/css files that aren't being downloaded in IE when you use that IP address. Are you sure IE isn't configured with a proxy?
John

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

Hello,
I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list. However,
in Outlook 2010, the form is not rendered properly.
When I clicked the "If there are problems with how this message is displayed, click here to view it in a web browser" link, the email is opened in
IE and the form is displayed correctly.
I also tried opening the same email in other clients, such as Thunderbird, Apple Mail Client and in mobile phones - the form is displayed correctly. I wonder
why it fails to do so in Outlook 2010. The user mentioned that this does not happen in Outlook 2003 and prior to migration (I used Exchange 2010 previously). I have also tried using OWA, but the form does not display correctly
Any help?
Note: I can't attach any images or links as it is mentioned that my account is not verified yet. I will post some screenshots when it is possible to do so

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

HTML mail preview not rendering correctly on EAS mobile clients

I'm having trouble pinning down an issue I'm having with the previews of e-mails that contain HTML on ActiveSync clients specifically iOS Mail clients. Clients are seeing HTML code in the message body previews...
Example 1: "[cid:google][cid:profilephoto] Hello..."
Example 2: "[https://statici.icloud.com/emailimages/v4/common/[email protected]] Dear User..."
When the user opens the message, everything is rendered fine (the previews remain the same though). I don't believe it's anything wrong on the client. The same messages delivered through Gmail on the client are previewed like this:
Example 1: "Hello User. You have successfully reset your password..."
Example 2: "Dear User. The following information for your Apple ID..."
I've tested with exchange servers outside the organization and the previews are rendered correctly (like Gmail). I don't know what version of Exchange the servers were running, but it leads me to believe this is not an outstanding bug between iOS
and Exchange; it's something specific to my server.
The issue is present for all users. I'm running Exchange Server 2007 SP3 and the client I'm experiencing the issue on is iOS 8.1.2.
Thanks!

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Appointments on the BB Pearl are not entered into the Outlook 2007 Calendar

The issue that I am having is as follows:
Calendar entries created on the BlackBerry Pearl are not being entered into the Outlook 2007 calendar.
Entries created in the Outlook 2007 calendar are being correctly entered into the BlackBerry Pearl calendar.
I have made several attempts to fix the issue including:
Removing and reinstalling the most recent version of the BB Desktop Software.
Deleting all email accounts but 1, removing and re-sending the service books.
Resetting the BlackBerry Pearl back to factory default.
Any suggestions would be appreciated at this point.

Hi and welcome to the forums!
You may have a corrupt Device calendar. Use the following procedure to correct:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Doesn't sync correctly with Outlook 2007!

All I wanted was a cute nice looking cell phone that syncs with outlook, and after I found it! It appears that Nokia my beloved company maybe has a bug in its software!
I have a Nokia 6300, MS Office 2007 and I'm using Nokia PC suite 6.84.10.3 which works fine until I try to sync the following :
If I create a "recurring appointment or event" and set the "recurrence pattern" for example to be the 29'th of every month (let’s call this pattern 1, this will work just fine) , but If I set the "recurrence pattern" to be the last Friday of every 1 month (let’s call this pattern 2) then this will sync with the wrong date (the date will be the date of pattern 1 although pattern 2 is selected)!!
This is really an issue for me, I really rely on my calendar and I really like my 6300 except for the fact that it syncs in a wrong matter.
*** Note: by the way I used the newest Nokia PC suite and I still have the same issue.
Guys can anyone suggest I real solution!? Thank you in advance.
I have a attached a picture, the event that I created when taking the snap shot will occur on (mm/dd/year) (12/28/2007) and it will be a Friday by coincidence but it will occur on (1/28/2008) which is a Monday. So this isn't syncing correctly.

I have exactly the same problem, and it is a big issue for me as well. Possibly more so as I had suggested that the whole company move over to the 6300.
The problem is definitely with the recurrence of type 3rd Thursday of every month Etc. I get the appointment, on the same date as the original "seed" appointment in outlook wiht the time replaced with 00:00 to 24:00. Sadly this has made this phone unusable and I have had to revert to my old Nokia 6230i which does not have this problem.
I am using Outlook 2007 6300 Firmware 5.5 and PC Suite version 6.85.12.0. I only sync one way from outlook to the phone.
Sadly this could be fixed quite easily if appointments of this sort were converted by PC Suite into "one off" type appointments.
I would really like a solution to this ASAP please.

RequestCenter emails not rendering correctly in Outlook 2007

Similar Messages

Maybe you are looking for