Requested functionality not yet implimented

Encore CS3 failed while burning a DVD. I re-booted and now it will not open the project; I get the error message "Requested functionality not yet implimented". I tried opening the project in CS2 instead, with the same result. Can anyone help?

Aiden,
A little bit more info on the project might help someone spot the problem. That error message is a new one to me, but then I have not completed a read of all of the Error Messages in the sub-forum.
Hunt

Similar Messages

Some or all of the samples requested have not yet been acquired?

Hi,
I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
Mode: differential, continuous sample
Samples per channel: 250,000
Sample rate: 250 kHz
Channel: A1, A9
The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes.
Attachments:
Screen Shot 2012-10-31 at 6.20.22 PM.png ‏265 KB

1. As said, you should not be using the Run Continuously button. Use a while loop to acquire your data. Setup the task before the loop and close it out after the loop.
2. When you have the while loop, put a wait in there (1 second might be good). This will help avoid the timeout issue.
3. Propagate your errors. Have the while loop stop on the error or your stop button. Use the Simple Error Handler at the end.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

RSRV: W: Function not yet implemented

Hello all. I am trying to view the dimension table status using "transaction code RSRV===>Elementary Tests===>Database Tables===>Database Information about InfoProvider Tables".
Whether I try this particular function or any other function in RSRV, I get the message: "W: Function not yet implemented", and I can't get past it.
Can anyone tell me how I can activate this functionality, using RSRV? We are running BI 7.0, 2004s. You see, I want to verify the stableness of existing cubes/dimension tables, as well as verify any new cubes/dimension tables, I create in the future.
Thank you in advance.
ErnLab

Hi Franklin,
I tried as per your suggestion but I still get the "Not implemented error" on Windows Phone 8.1. May be I am doing something wrong here. I have attached screenshot of the error.
Below is the code I am trying,
I am having a newDoc folder inside my app.
I want to get all the files from inside this newDoc folder,which in turn have subfolders and files so I am using orderByDate because
CommonFileQuery.defaultQuery will return only files from current folder.
var localAppFolder = Windows.ApplicationModel.Package.current.installedLocation;
localAppFolder.getFolderAsync("newDoc").done(function(folderObject) {
var temp = folderObject;
var CommonFileQuery = Windows.Storage.Search.CommonFileQuery;
var results = folderObject.createFileQuery(CommonFileQuery.defaultQuery);
results.getFilesAsync().done(function getFilesSuccess(sortedFiles) {
var pathArray = [];
sortedFiles.forEach(function forEachFile(item) { pathArray.push(item.path);
The above code works as expected on desktop. Can you kindly tell me where or what I am doing wrong as I am newbie to WinJS.
Also I wanted to post screenshot of the error but was not allowed since my account is yet to be verified.

The request has not yet been updated into the data targets.

Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
Thanks & Regards,
Praveen Yagnamurthy.

Hi Praveen,
Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
Hope it helps!
Regards,
Pavan

Data load warning, not yet completed

Hello, i am trying to load data from view table using Generic DS for master data.
i have a characteristics Infoobject where i Assigned DS, and created infopack.
When scheduled load ,it gives request proceessed message, when i go to monitor it gives following message:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
My data target is Charact INfoobjt, can anyone tell me wht should i do?thanks
dk

Hi,
Check R/3 SM58 and BD87 for pending tRFCs and IDOCS and execute them if required.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Process IDOCS Manually
IDOCS Process Manually
Non-updated Idocs found in Source System
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
Re: mannualy process idoc
Non-updated Idocs found in Source System&messageID=2311994
regarding idocs
regarding idocs

Ajax:callback function not called for every readystatechange of the request

Author: khk Posts: 2 Registered: 2/17/06
Feb 17, 2006 11:04 PM
Hi
I am working with an ajax program.
In that i have defined a callback funtion
but that function is not being called for every readystatechange of the request object for the first request .
but it is working fine from the second request.
function find(start,number){
var nameField=document.getElementById("text1").value;
var starting=start;
var total=number;
if(form1.criteria[0].checked) {
http.open("GET", url + escape(nameField)+"&param2="+escape("exact")+"&param4="+escape(starting)+"&param5="+escape(number));
else if(form1.criteria[2].checked) {
http.open("GET", url + escape(nameField)+"&param2="+escape("prefix")+"&param4="+escape(starting)+"&param5="+escape(number));
http.onreadystatechange = callback2;
http.send(null);
function callback2(){
if (http.readyState == 4) {//request state
if(http.status==200){
var message=http.responseXML;
alert(http.responseText);
Parse2(message);
}else{
alert("response is not completed");
}else{
alert("request state is :-"+http.readyState);
}

Triple post.
You have been answered here: http://forum.java.sun.com/thread.jspa?threadID=709676

Requests to change the security question but have not yet found an email

Requests to change the security question but have not yet found an email

If you aren't receiving the email on your rescue email account (and you've checked the spam folder on the account and tried clicking the reset link again) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

Admission Audit Run (Action is not possible; function not released yet)

Hi All,
I have created a Requirement Profile Template for admission audit and attached it with a program of study.
But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
Action is not possible; function not released yet....
Please tell me what does this message indicate, please let me know if u need more information regarding it.
Thanks in Advance
Sudhir Gupta

Dear Michael,
Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
Yes its generating a requirement profile automatically as soon as admission record is created.
In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
The requirement screen is blank. No error message.
Though i maintained the Requirement Profiles and RPT as per Cookbooks.
I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
Warm Regards
Vinod Kumar

Request is in green, but in the monitor it says "Not yet Completed/warning"

When I go to the manage screen of ODS I see green in "Request Status". If I go the Monitor and details couple of data packages are still in Yellow color.
Over all it says Not yet Completed/warnings with yellow indicator..
What it means?

In the Monitor screen Under the Details Tab Go to any yellow marked Data Package and see if any message is available there.
Regards.

Request not yet updated with datamart

Hey guys,
I am having trouble with an Upload.
Some days ago I uploaded an Excel file in an ODS without any problems. Everything turns out green:
Load: green
Activation: green
Yet the data is not in my Infocube yet, because when I run a query the data is simply not there.
Now when I click 'manage data' on the ODS, I see this message that says 'Request not yet updated with datamart'.
What can I do about this or what might be the problem?
Thank you very much,
Filip

Hey Jürgen,
I tried the "update 3.x" but it wasnt working.
Next I tried to generate a datasource and to "update 3.x data", this 'worked' it didn't give me an error, but still my request is still "not yet updated with the datamart".
Any ideas?
Filip

Error: Request function SUCH not available here

Hi Guys,
When user try to open an existing order via VA02 below pop up error is appearing
Request function SUCH not available here
when i see SM12 i see couple of lock entries, though i remove these entries, still getting the same error again.
Please help!
Yash

Please check Note 67836 - "tablesParm IS REQUESTED" in update functions
Hope it helps
Regards
Sai

Handling of this ADSVALUE type is not yet implemented

Hi,
I have setup an authentication source to import groups from our MS AD server. On running a job, I am getting the error below. The auth source does not pass a username/password since I am able to browse the AD anonymously. I was hoping I could get more details regarding the error via log4net but strangely, log4net is not generating a ADAWSLog.txt file (level=INFO).
Jul 7, 2006 5:07:04 PM- PTAuthSourceAgent::ProcessGroups: Call to retrieve the groups on this auth source failed. Please check that the authentication source server is online.
*** Exception: com.plumtree.server.impl.soap.OpenSoapException: Error in function AWSProvider.GetGroups (): Error in function SOAPEnvelope.Restore (arrayText == [B@864e43): SOAP fault: faultcode='soap:Server' faultstring='Server was unable to process request. --> Unable to create GUID string for group LDAP://server:389/path. Error message: Handling of this ADSVALUE type is not yet implemented (type = 0xb).: GetGroupsInternal error looping through results: GetGroupsInternal Error in GetGroups'
at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:371)
at com.plumtree.server.impl.users.providers.AWSProvider.GetGroups(AWSProvider.java:554)
at com.plumtree.automationserver.agents.PTAuthSourceAgent.ProcessGroups(PTAuthSourceAgent.java:857)
at com.plumtree.automationserver.agents.PTAuthSourceAgent.PerformOperation(PTAuthSourceAgent.java:266)
at com.plumtree.automationserver.shell.PTJobShell.perform(PTJobShell.java:628)
at com.plumtree.automationserver.shell.PTJobShell.runJob(PTJobShell.java:210)
at com.plu
mtree.automationserver.shell.PTJobShell.run(PTJobShell.java:100)
Caused by: com.plumtree.server.impl.soap.OpenSoapException: Error in function SOAPEnvelope.Restore (arrayText == [B@864e43): SOAP fault: faultcode='soap:Server' faultstring='Server was unable to process request. --> Unable to create GUID string for group LDAP://server:389/path. Error message: Handling of this ADSVALUE type is not yet implemented (type = 0xb).: GetGroupsInternal error looping through results: GetGroupsInternal Error in GetGroups'
at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:371)
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(SOAPEnvelope.java:68)
at com.plumtree.server.impl.webservice.PTWebService.Invoke(PTWebService.java:1017)
at com.plumtree.server.impl.webservice.PTWebService.Invoke(PTWebService.java:906)
at com.plumtree.server.impl.users.providers.AWSProvider.GetGroups(AWSProvider.java:547)
... 5 more
Caused by: com.plumtree.server.impl.soap.OpenSoapException: SOAP fault: faultcode='soap:Server' faultstring='Server was unable to process request. --> Unable to create GUID string for group LDAP://server:389/path. Error message: Handling of this ADSVALUE type is not yet implemented (type = 0xb).: GetGroupsInternal error looping through results: GetGroupsInternal Error in GetGroups'
at com.plumtree.server.impl.soap.SOAPParser.LoadInternal(SOAPParser.java:681)
at com.plumtree.server.impl.soap.SOAPParser.LoadBinary(SOAPParser.java:590)
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(SOAPEnvelope.java:65)
... 8 more
Jul 7, 2006 5:07:04 PM- *** Job Operation #1 failed: ProcessGroups failed(282610)
Jul 7, 2006 5:07:04 PM- Done with job operations.

Have you solved this issue? I have the same error message, although all my servers are up, and pingable.
Thanks,
Dave

Data packet not yet processing in ODS load??

Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)
Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages

John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note 613440 also.
Note : 647125
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
 ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
 ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram

EPSON Artisan 810 a Bi-Function, not Multi-Function, All-In-One

I was in a local OfficeMax, looking at an *EPSON Artisan 810* all-in-one (Print, Scan. FAX, Copy), which came in a box covered with text and imagery detailing all of the amazing features it has. To my delight, I discovered that it supported OS X, albeit, they note that "some features like sharing memory cards over a network may not be supported". You'd think that would imply that tertiary (or specialty) functions may not work. But, surely, the basic 4 functions would, right?
It would have been nice if the employees had any kind of a clue with regard to the products they sell. But they don't. So I checked some support forums and the EPSON driver download page (on my phone), and sure enough, they even have Snow Leopard drivers. So I buy the printer and take it home.
I should have suspected something may be amiss when the installer asked me to enter my administrator password, but the dialog requesting the credentials kept losing focus, making it difficult to type in my password. Yikes.
I managed to get through the 30-part install (well, it felt like 30 separate, chained installers). The installer vanished, and I had no printer in my "Print and FAX" Preference Pane. Nice.
So, I add a printer manually, and it did see the EPSON as a Bonjour device. So I jump over to try the scanner, and I get a troubleshooter. After scrounging around the web, I found some advice from a user who discovered that you have to go into the Utilities folder and run an EPSON scanner utility to find and configure the device. ugh. Once I did that, it seemed to work.
Now, on to the FAX. The preference pane did not see a FAX device anywhere, and the EPSON printer itself has no FAX capabilities. So back to the web. After an hour of searching, nada. And no one even complaining about this apparent "missing" feature. So I hit the manual, and notice that FAXing from a computer is only supported in Windows.
At this point, I'm not even going to try to get the "Copy" function working.
OFFICEMAX Knowledgeable Sales Staff: FAIL
EPSON Customer Support: FAIL
EPSON Product: FAIL
EPSON Integrity: FAIL
So, in summary, this is a bi-function, not a multi-function, device. It prints and scans. They should put this on the box so people know what they're getting (or in this case, not getting). It's a real shame too, because I went with EPSON because Hewlett Packard did something similar with a computer I bought. The machine was billed as a multimedia and entertainment computer, yet, it couldn't play a game that was 5 years old. Do any of these companies have their metaphoric poop together?
And don't get me started on Lexmark.

Epson has the (annoying to me) built-in default of numbering each scan; so whatever name you would decide to use, you would still wind up with "mypicture093.jpg" for instance. That is true if you use the Epson Scan software.In any case, if you use that, once you click on "scan", you should get a new pop up window where you can enter the name (called Prefix by Epson) and where to save it. You cannot get rid of the "start number", but you can delete the number once the icon appears on your desktop or in a folder: just click it once and then hit "return" on your keyboard and you can change part of the name or the entire name for that matter.
If you choose to use the OS built-in app (under System Preferences -> Print & Fax), simply highlight the Artisan 810 and click on Scan and then on "open scanner"; you are then presented with a new window where you can change all sorts of settings incl. the name.

CX_CRM_UNSUPPORTED_OBJECT - Object MemberBasicSearch is not (yet) supporte

Hello Experts,
We have configured the Loyalty Management in our system. We are able to create Loyalty Programs successfully through Loyalty Professional role in Web UI. However, on trying to create a memebership object or Member activity, we are getting an error :
Exception Details
CX_CRM_UNSUPPORTED_OBJECT - Object MADynQuery is not (yet) supported
Method: CL_CRM_GENIL_OBJ_MODEL=>IF_GENIL_OBJ_MODEL~GET_OBJECT_KIND
Source Text Row: 9
And also when we try to open Ic_Loyalty_Agent role through Web Ui we are getting the following error.
Context initialization failed in view ICCMP_ME_SEARCH/Search of UI Component ICCMP_ME_SEARCH
An exception has occurredException Class CX_CRM_UNSUPPORTED_OBJECT - Object MemberBasicSearch is not (yet) supported
Method: CL_CRM_GENIL_OBJ_MODEL=>IF_GENIL_OBJ_MODEL~GET_ATTR_STRUCT_NAME
Source Text Row: 10
Initialization of view MESEARCH of UI Component ICCMP_ME_SEARCH failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View ICCMP_ME_SEARCH/Search in component ICCMP_ME_SEARCH could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Kindly help us to get this resolved.
Thank you
Leela

Hi Joaquin,
Your answer has resolved half of the issue, Now i am able to view all the attributes/Menu in Loyalty IC Agent profile thank you for the same. However i am not able to create Membership activity or Membership in Loyalty Professional role in Web UI when i try to do the same i am getting the following error.
Error when processing your request
What has happened?
The URL http://sitaserv21.us.sitacorp.com:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CR1 : Function module "CRM_LOY_COM_GET_INST_TYPE_RFC" not found.
The error occurred on the application server sitaserv21_CR1_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_LOY_FRW_OBJECT~CHECK_AUTHORITY_GEN of program CL_LOY_FRW_OBJECT=============CP
Method: IF_LOY_FRW_OBJECT~CREATE of program CL_LOY_FRW_OBJECT=============CP
Method: IF_LOY_FRW_OBJECT~CREATE of program CL_LOY_MSH_ROOT_MEMBERSHIP====CP
Method: IF_LOY_FRW_APPL_CONTROLLER~CREATE_OBJECT_DATA of program CL_LOY_FRW_APPL_CONTROLLER====CP
Function: LOY_MEMBERSHIP_CREATE_RFC of program SAPLLOY_MSH_RFC
Function: CRM_LOY_MEMBERSHIP_CREATE of program SAPLCRM_LOY_MEMBERSHIP_API
Method: CREATE of program CL_CRM_LOYIL_ABSTR_ROOT=======CP
Method: IF_GENIL_APPL_INTLAY~CREATE_OBJECTS of program CL_CRM_LOYIL==================CP
Method: CREATE of program CL_CRM_GENERIC_IL_NEW=========CP
Method: ROOT_CREATE of program CL_CRM_BOL_CORE===============CP
Regards
Leela
Edited by: Leela Raghupatruni on Mar 9, 2012 8:17 AM
Edited by: Leela Raghupatruni on Mar 9, 2012 8:22 AM

Requested functionality not yet implimented

Similar Messages

Maybe you are looking for