Requesting all to help me how to create lsmw using idoc method

hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balaji

Hi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan

Similar Messages

How to create material using BAPI Methods?

hi,
how to create material master dat using BAPI?
could u guide me
i will be waiting for reply.
REGARDS
ESWAR.

Hi eswar,
Try this code to create gods mmovement...
DATA: GOODSMVT_HEADER LIKE BAPI2017_GM_HEAD_01,
      " Material Document Header Data
      GOODSMVT_CODE LIKE BAPI2017_GM_CODE,
      " Assign code to transaction for BAPI goods movement
      MATERIALDOCUMENT LIKE BAPI2017_GM_HEAD_RET-MAT_DOC,
      " Number of Material Document
      GOODSMVT_ITEM LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER
      LINE,
      " Create Material Document Item
      RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE
      " Return table for messages
*Fill values in header
GOODSMVT_HEADER-PSTNG_DATE = '20030825'.
GOODSMVT_HEADER-DOC_DATE = '20030802'.
*Fill GOODSMVT_CODE
GOODSMVT_CODE-GM_CODE = '05' .
*Fill Item Table
GOODSMVT_ITEM-MATERIAL = '100-100'.
GOODSMVT_ITEM-PLANT = '1000'.
GOODSMVT_ITEM-STGE_LOC = '0001'.
GOODSMVT_ITEM-MOVE_TYPE = '501'.
GOODSMVT_ITEM-ENTRY_QNT = '50'.
GOODSMVT_ITEM-ITEM_TEXT = 'Test Sanket'.
*GOODSMVT_ITEM-COSTCENTER = '1000'.
APPEND GOODSMVT_ITEM.
*Create Good's movement
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    GOODSMVT_HEADER = GOODSMVT_HEADER
    GOODSMVT_CODE    = GOODSMVT_CODE
IMPORTING
    MATERIALDOCUMENT = MATERIALDOCUMENT
TABLES
    GOODSMVT_ITEM    = GOODSMVT_ITEM
    RETURN           = RETURN.
*Commit BAPI
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    WAIT = 'X'.
*Display Goods movement number
FORMAT COLOR 6 INVERSE ON.
READ TABLE RETURN WITH KEY TYPE = 'E'.
IF SY-SUBRC = 0.
WRITE: /,'ERROR! Goods movement not created'.
ELSE.
WRITE: /,'Goods movent number',MATERIALDOCUMENT COLOR 5,
           'posted for material',GOODSMVT_ITEM-MATERIAL.
ENDIF.
FORMAT COLOR OFF INVERSE OFF.
try this on report program and create a goods movement.
Sanket.

Hi all, May i know how to create filters in Hyperion Planning Application?

Hi all, May i know how to create filters in Hyperion Planning Application?
i don't know how to create filters in Planning Application. but my superior asking me to create filters.
Thanks & Regards,
Sekhar

Go to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
Repeat process for all access permissions.
If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
Refresh Planning including security filters
Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
Cheers
John
http://john-goodwin.blogspot.com/

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
Thanks

Anil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh.

How to create LSMW project for MPN deletion

Hi
in MP01 there is a deletion indicator how to tick mark that for All MPN materials
how to create LSMW project
bcz LSMW project wil reads the data line wise bt MPN numbers varies for different materials
how to do this?
i cant do it manually bcz there sre around 15000 materials are there...
can anybody help me on this?
Regards
Smitha

there is no standard program for deletion, through LSMW recording method possible to delete the materiasl.
goto LSMW tcode and create programt subproject and object goto step 1 select the second method that is RECORDING , here you need to record the MM06 tcode and process the recoding...
the tcode MM06 is set the deletion flag.
if you want delete alla metarial based on client level use MMDE tcode.

How to create a simple idoc in practice? can you provide an example?

how to create a simple idoc in practice? can you provide an example with full source code?

Try with the follwoing steps
Sending System(Outbound ALE Process)
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Create Model View
Tcode BD82 ¡V Generate partner Profiles & Create Ports
Tcode BD64 ¡V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ¡V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 ¡V Send Material Data
Tcode WE05 ¡V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Thanks & regards
Sreenivas
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Take a look at this guide.
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Create The Extension Segment
Transaction: WE31
The first step in extending an IDoc is to create the new segments that will go into that IDoc. There are some rules that you need to follow when creating the segments:
- The name of each segment type must start with Z1
- For each field in the segment you need to define a field name and a
data element.
- The data element for the segment structure must be of data type CHAR.
How to create new segments:
Run the segment maintenance transaction WE31.
Type your new segment name, and click on Create.
Define the fields of your segment:
Field name
Data Element for the field (from the ABAP dictionary).
Do not change the Export length!
Save the segment
Run Segment -->Check to check the segment for consistency.
Release the segment for transport. Select Edit -->Set Release. Note that the Release column now has a check mark.
Create the Extension IDoc Type
Transaction: WE30
After you create the segments to be added to the extension type, you can create the extension type itself. Execute transaction WE30, enter the extension name, select Extension type, and click Create. You now have three options:
Create new type: Does not refer to other extension types
Create copy: Copies info from an extension type that already exists
Create successor: Extends an extension type from a previous release
of R/3. You can only have one version of an extension type for
each release.
Enter the Basic IDoc type that this extension type will extend.
The screen now shows the structure of the IDoc type you used as
a reference.
Position the cursor on one of the segments and click Create. This will insert an extension segment as a child of the selected segment.
NOTE: A segment cannot appear more than once in an IDoc type! You must control the use of duplicate segments with the segment attributes (the next screen).
The segment attribute screen appears. Enter the information and save.
Extension segments should not be mandatory (for future upgrades), and will need to have minimum and maximum number of instances defined. This answers the question, for each instance of the parent segment, how many instances of the child segment may we have?
You can press the Segment Editor pushbutton to view or change the segment definition.
Create the new Message Type
You can only use an extension IDoc type by assigning it to a message type. You can create a new message type for this.
First the message type itself needs to be created.
Transaction: WE81
Create a new entry and save. Use SAP established customer naming conventions (good form is to start with a Z and retain the rest of the related SAP message type, so, for example, MATMAS becomes ZMATMAS).
After creating the message type, associate it with the corresponding Basic IDoc Type and Extension Type. This relationship is used when IDocs are sent to or received from a partner to determine what segments are valid and what the hierarchy for those segments is.
Transaction: WE82
Create a new entry and enter the Message type, Basic IDoc type, Extension type, and Release, and save your data. Note: the release assignment is not valid for prior SAP releases.
One message type can be associated with many basic IDoc types; however, you need a one-to-one relationship for distribution via ALE.
regards,
srinivas
*reward for useful answers*</b>

How to create and use Webservice controls using WSDL in weblogic portal10.3

Hi All,
I have WSDL , How to create webservice controls using the WSDL in weblogic portal 10.3 and use those controls to invoke those webservice methods?
please give me the documents links for this.
Thanks
Venkata Sarvabatla

As far as I remember, Controls can be called only from Pageflows, BackingFiles, Another Control (Like control calling another control) etc. In pageflow we use annotation @Control and give control classname and a varialbe for that. I am pretty sure this annotation may not work from normal java class and in your case a JAVA JSR Class.
If you installed the samples, refer the samples from WLS: C:\beawlp103\wlserver_10.3\samples\server\examples\src\examples\webservices. They have lot of fully ready to work samples with instructions. I used clientgen ant task. But you can use standard SUN JDK Command "wsimport" also to generate the java files from the WSDL. Open any command prompt. If java is in classpath, just run wsimport and that should give an idea.
Goud

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

how to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

See the below discussion
How to create and use Webservice controls using WSDL in weblogic portal10.3
Thanks,
Venkat Sarvabatla

How to create database using shell script

hai
how to create database using shell script

The documentation details the steps to create a database manually. Another option is to use DBCA to create the scripts. DBCA will give you a complete set of scripts that will create a database.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref220

How to create partner in idoc

hello friends ,
i am new in ALE IDOC i don't know how to create partner in IDOC.
thanks in advance

Hi,
To create a partner, use transaction WE20; before which the following configurations should be done.....
- Creation of logical system(txn BD54)
- Assigning client to Logical System(txn SCC4)
- Creation of RFC destination(txn SM59)
- Creation of port(txn WE21)
Now create the partner profile for the logical system defined in BD54, using the port as the one created in WE21.
A partner can have outbound and inbound message types, which are purely as per the business requirement.
~ Bineah.

How to create an inbound Idoc from an inbound IDoc in same client

How to create an inbound Idoc from an inbound IDoc in same client
Idoc will come from XI as an inbound idoc to SAP, now I have to read this inbound Idoc and split it into Several Inbound Idocs and now needs to be posted in the same client.
please let me know the procedure..
Thanks in advance,
Sagar

Hi Sagar,
Develop a cusom Z-Inbound function module, configure the Z-FM to trigger when idoc is recieved from XI. In your Z-Inbound function module split the idoc (Recieved from XI) into respective Idocs and Using MASTER_IDOC_DISTRIBUTE post the IDOCs into the same system.
Thanks & Regards

How to create indexes using CREATE TABLE statement

Hi,
Can anyone please tell me how to create indexes using CREATE TABLE staement? This point is part SQL Expert exam (1Z0-047) and please guide me to use which books for this particular exam.
Thanks in advance.

Can anyone please tell me how to create indexes using CREATE TABLE staement?e.g. creating a primary key or a unique constraint will generate indexes along with the create table syntax:
SQL> create table t (a integer primary key, b integer unique)
Table created.
SQL> select   index_name, index_type, uniqueness
from   user_indexes
where   table_name = 'T'
INDEX_NAME                     INDEX_TYPE                  UNIQUENES
SYS_C0016575                   NORMAL                      UNIQUE
SYS_C0016574                   NORMAL                      UNIQUE
2 rows selected.

Requesting all to help me how to create lsmw using idoc method

Similar Messages

Maybe you are looking for