Requesting clarification on how to manage network monitoring accounts
First, I've read this article :http://community.spiceworks.com/help/How_Do_I_Change_Network_Login_Accounts%3F:) I'm trying to get Spiceworks desktop setup and clean up it's inventory. I was working on one device that supports v1,2 and 3 of SNMP. I was having issues getting v3 setup so I tried v1 and it worked. I saved these settings, but I really want to use SNMP v3 if I can. I've already deleted the v1 'account' that it was using. How do I get back to the option of trying to specify a v3account for Spiceworks to useon the device?
When I go to the device in inventory, I've selected the re-scan option, it appears to take a moment, but never prompts me with 'invalid credentials' or anything. Last scan time doesn't reflect the last time I manually tried to run as scan, it's stuck at the last successful v1 scan. I've entered, what I think...
This topic first appeared in the Spiceworks Community
I'm writing a script that will automatically install Outlook 2010 if Office 2013, 2010, 2007, or 2003 are not installed. It's part of a script I already have each tech has to run locally due to management decisions(that I have no control over). Right now I prompt the tech if they want to install it. Then test for the installer and install it.
PowershellDo{$outlook = read-host "Would you like to install Outlook 2010? y/n" IF ($outlook -eq "y") { If (Test-Path -Path C:\Update\outlook2010) { saps -filepath C:\update\outlook2010\setup.exe -wait } Else { Write-host "Outlook is not in the update folder!" -ForegroundColor Red } }ElseIF ($outlook -eq "n") { Write-Host "Please make sure there is an email client." -ForegroundColor Yellow }}While ('y','n' -notcontains $outlook)What I would like to do is remove the prompt as it's a volume license...
Similar Messages
-
How to manage or monitor My RTP stock in customer
dear all,
I have RTP (Returnable Transport Packaging) material to deliver with material Ordered to customer
how to manage or monitor my RTP Stock in customer ?
and what movement type is used when i send to / received from customer ?
thanks
imronHi,
You can see the RTP at customer place in MMBe using special stock indicator 'V'.
For more information check the following link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/560051545a11d1a7020000e829fd11/frameset.htm
Regards,
Ramakrishna -
SCCM 2012 deploy windows 7: how to manage network/server load?
Hi,
Hypotetically, if you would deploy Windows 7 to hundreds of pc’s at once, how could you manage that, regarding organizing the deploy, regarding network/server load? F.e. you deploy to a collection which has 500 pc’s, users can select when
to load the OS (Windows XP, we deploy the SCCM 2012 client, they can choose when to install)
*How can you be sure network is not overloaded?
*Can you limit in SCCM 2012 bandwith usage?
Please advise.
J.
Jan HoedtYou need to be as local as possible. You can host a deployment point role on a client OS such as windows 7 so you could temporarily setup one machine hosting OS images and then rebuild it last as well.
On a 100MB LAN with DP's hosted in a datacenter (not on subnet) we get to about 75 machines building at once before we see TFTP timeouts on PXE booting due to load on the local network. I would get your build as quick as possible and then do them in increasing
block sizes whilst monitoring the network and server load.
To speed up builds you could...
Build and capture to get a WIM file with most apps and updates in it.
Change the TFTPBlockSize registry settings on the DP's (If PXE booting) to as high as it will go
Host WIM files on your DP's with the Package share settings configured and enable the "Access content directly..." option in the Apply Operating System part of your task sequence.
Hope this helps.
Shaun -
How to Manage Multiple iCloud Accounts?
I've been getting these email notifications saying that my "complimentary iCloud storage upgrade expires" soon. It's prompting me to upgrade my plan, which I did for my main iCloud account, however how do I do this for all my other accounts?
I already went to System Preferences -> iCloud -> Sign Out, but once I click on "Sign Out" it says "do you want to keep a copy of your iCloud contacts on this Mac" (which I responded with "Keep Contacts"), then the next pop up says "If you stop using iCloud for Calendars & Reminders, calendars and reminders stored in iCloud will be deleted from this Mac" with the option of "Cancel" or "Delete from Mac". I don't quite understand what this means and am too scared to click "Delete from Mac", but unless I do this I can't proceed any further. Help! What should I do?
All I want to do is just log out from one iCloud account to another (on my Mac) so I can upgrade my storage plan on a different iCloud account.
Thanks!You only have the complimentary storage on one iCloud account - the one you migrated to from MobileMe. If you have upgraded the storage then this will work with all your devices logged into that account.
Do you actually have any other iCloud accounts - with different logins and email addresses? These would not be affected by upgrading the ex-MobileMe one.
If you have another iCloud account you want to upgrade you will have to pay for it separately, but in that case you don't have the impending termination of the free storage.
To change the iCloud account in use on any one device, go to the iCloud preference/settings pane and click 'Sign out' or 'Delete account' as applicable. This will not delete the account from the server. If 'Find my iPhone/Mac/Ipad' is running you will have to turn it off first. Do not choose to retain data on the device (it will still be on the server and when you sign back in you will get duplicates when you sign back in).
Then you can sign in with the other account, do whatever is necessary, sign out in the same way and back into the original account, whereupon your data will reappear.
But, once again, the prompt to upgrade your storage applies to only the one account, and will take effect for all devices logged into it without your havint to do anything else. -
How to manage multiple exchange account calendars in Outlook
the assistant of the VP wants to manager the VP's calendars on Outlook 2010, so she can do a side-to-side comparison.
VP has two exchange accounts, one is hosted locally(exchange 2007), and another one is on Office 365. these are two different companies.
I can add the office 365 calender's to her Outlook as Internet calender, but she wants to have edit permissions, so she can manage his calendar(like accept, cancel and change appointments). I also can let her use OWA, but it's not convenient.
she can actually do this on her iPhone by adding VP's exchange account on the phone but just have "calendar" checked. Is is possible to do this on Outlook?
This topic first appeared in the Spiceworks Communitythe assistant of the VP wants to manager the VP's calendars on Outlook 2010, so she can do a side-to-side comparison.
VP has two exchange accounts, one is hosted locally(exchange 2007), and another one is on Office 365. these are two different companies.
I can add the office 365 calender's to her Outlook as Internet calender, but she wants to have edit permissions, so she can manage his calendar(like accept, cancel and change appointments). I also can let her use OWA, but it's not convenient.
she can actually do this on her iPhone by adding VP's exchange account on the phone but just have "calendar" checked. Is is possible to do this on Outlook?
This topic first appeared in the Spiceworks Community -
How to manage settings so account are logged out of when browser is closed.
Before the last update, when I closed the browser all of my accounts were logged out of. That is no longer the case and I don't know how to fix the settings to bring it back to the way it used to be.
I am in private browsing and tried the about:config trick where I set browser.sessionstore.privacy_level to either 1 or 2: it didn't work.There are separate downloads for the two plugins, but Adobe has made updating smoother by installing an auto-updater that handles both. It only seems to run when I restart Windows, but that might be configurable (I haven't checked). Anyway, no worries on interference, they coexist quite happily.
(When downloading any Flash player, be careful not to install unwanted additional software such as security suites...) -
How to manage automatic GL account in PR ans PO ?
Hi gurus,
I work on a ECC6.0.
All the customizing settings are done:
- links between valuation classes and GL accounts.
- links beetween valuation classes and material master
When i create a PR or PO, with a material group or a material master, GL account is not fullfilled automatically. The system asks me to do it.
I did'nt find a thread about this problem. Perhaps an ECC6.0 problem ? Any Idea ?
Thanks for your help,
Regards,
DenisI've linked the valuation class for the material group (for direct purchasing).
(In the V023_E)
For each valuation class, and for each key (ekg, etc) +/- account has been stored (T030)
I tried the same with a material master, same problem occurs.
Denis -
How to manage my Nokia Account?
i want to link my sports tracker account with nokiavine for which i need to link the nokia account with it in th application setup on my n95 8gb, but it says already paired.
so i skipped the second step and now when i uploaded my vines, they only show in nokiavine homepage and not sportstracker.
any ideas?
please can u link my sports tracker account with my nokia account
Live & Let DieMy Nokia jsut dont let me in (register). I wonder why?
-
Unable to disable Network Monitor in Flash Builder 4 Standard
For some reason the Network Monitor is enabled for my Flash Builder project. Perhaps it was enabled when I was running the FB4 Beta 2 version. Now I need to disable the Network Monitor, but of course, since I'm using FB4 Standard the Network Monitor view says I need to purchase FB4 Premium.
All my app traffic is redirecting to localhost:37813 so I know the network monitor is still enabled. Can anyone tell me how to disable Network Monitor in FB4 Standard?
Thanks,
DavidThierry,
I finally figured it out. In Flash Builder close your project. Then in the file system go and directly edit the .actionScriptProperties file. In the main <actionScriptProperties tag edit the includeNetmonSwc="true" flag to be includeNetmonSwc="false" instead. That will stop including the network monitor library in your code and should turn monitoring off.
That setting is controlled by the network monitor tab, but that tab is only visible with the premium version of Flash Builder so it seems once your trial version times out you can never disable it via the GUI, just via the .actionScriptProperties file.
Now reopen your project after saving the changes to .actionScriptProperties and you should be good to go.
David -
How to manage AUD$.
Hi All,
I have enabled audit_trail at my DB server.So can anyone guide me how to manage or monitor it's size.sb92075 wrote:
I have enabled audit_trail at my DB server.So can anyone guide me how to manage or monitor it's size.AUDIT data is not different than other data within the DB.
Treat AUDIT data the same as other application data.This is utterly wrong. RTFM, please, before posting such nonsense.
2OP: supported way of managing audit data is DBMS_AUDIT_MGMT package. You can find more details about it in the documentation & MOS. -
Basic Network Monitoring for Cisco Operation Manager 2012
Hello,
Please bear with me as i'm new the Operations Manager 2012 world. I've just installed operations manager 2012 in our environment and i've setup a network management point. I've discovered my networking gear which is primarily cisco equipment. The devices
are appearing as CERTIFIED. It appears that they are HEALTHY however in most cases i'm getting some arbitrary monitors. I have a 6509 switch where memory and processor appear to be being monitored out of the box. I'm receiving alerts and everything.
My question is how do I turn on monitoring for other discovered components. I seem to understand I can make SNMP monitors under the authoring pane if i know the OID. That sounds like it'd be tedious work for such a simple and basic monitor. However I was
under the impression I would be able to monitor a lot of these components with a simple click of a button. Is this not the case? I'm primarily interested in monitoring the state and performance of particular interfaces as well as the state of the power supplies
in our switches. Is there a guide that explains the basic principles of this. What are my options?
Thanks!
-BrandonHi,
You will need to edit the discovery and broaden the range. You may use recursive discovery.
Recursive discovery will try to discover any other network devices it knows about through its Address Routing Protocol (ARP) table, its IP address table, or the topology Management Information Block (MIB) to grow the network map and present all applicable
devices to you for monitoring.
You can also filter out devices that you don't want to be discovered by using properties such as the device type, name, and object identifier (OID). This is a handy option if you wanted to quickly discover all the network devices in your network except,
a small number or some with a specific criteria.
In really large networks with a lot of network devices, keep in mind that there is a default limit of 1500 network devices that can be discovered recursively. You can of course tweak this limit to suit your environment if you wish, but for most people, this
won't be needed.
More details, please go through the article below:
http://kevingreeneitblog.blogspot.com/2012/07/scom-2012-network-monitoring-explicit.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Network Monitoring~~~Operations Manager 2012 R2
Hi All,
I am using SCOM 2012 R2 when i am trying to discovery network devices it discovered, but its showing in discovery rules but not in network devices.
Guys can you lent me how much time will it take ...Hi,
Discovery of a large number of devices can take several hours to complete. We may need to wait for some time.
In addition, please go through the below links for more helpful information related with network discovery:
How to Discover Network Devices in Operations Manager
http://technet.microsoft.com/en-us/library/hh278846.aspx
Troubleshooting Network Discovery in SCOM 2012
http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li -
How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue
you can try:
*Wireshark: http://www.wireshark.org/download.html -
[NSFileHandle][Sockets] How to manage a network disconnection?
Hi,
I have built a client/server app that communicates via TCP/IP.
The *Client is an iPhone Application* that receives and sends many messages of variable sizes through a NSFileHandle object linked with a socket as its filedescriptor
I catch *incoming bytes trough an Observer* whose matching message is named "DataAvailable:(NSNotification *)aNotification".
*When the server stops*, the observer receives one last "dataAvailable" notification, which I try to manage with the [NSFileHandle readdataoflength:1]... that throws an *exception indicating the +connection has been reset by peer+* , which I catch and manage through a SocketDidDisconnect: homemade message.
But I have a *problem when the disconnection occurs directly because of a network disconnection* (I did disconnect the network on purpose) : I receive *no "DataAvailable" notification* (although it receive one I just close the connection from the server Application).
Then I thought I could check every 1/10 seconds if my connection was still ok by trying to do a [MyNSFileHandle ReadDataOfLength:0] : that would throw an exception as soon as my connection goes down. But obviously, reading 0 bytes does not have any effect. And since I don't wanna loose the queued incoming data by various random reading, I don't know how to detect such a network problem.
If any of your has an idea about *how to manage a network disconnection with a NSFileHandle without involving the random reading of queued incoming data*, I will listen to you with the greatest interest.
Thank you for reading till the end.Looks like it will be of some help, yes.
But I don't have time to test it today. I'll tell you as soon as I have tested it.
Thanks anywa for your help -
HP Storage Management Pack Conflicts with Network Monitoring SNMP
The HP Storage management pack that I installed requires starting the Windows SNMP services, which creates a conflict with SNMP used for SCOM network monitoring. I am spinning up a second SCOM mangement server so I can split these functions. What would
you recommend to split these functions across the two management servers? Uninstall the HP Storage Management Pack, and install on the new server? Or move the network monitoring to the second server?
Thank you for your help!Does the HP Storage pack support resource pools? What I've found with these 3rd party packs that implement connector services is they do not provide true HA via SCOM resource pools - they are standalone systems with a connector service. This is true for
the NetApp (DataONTAP) pack, and it's a huge disappointment.
Vendors do this because they have an API, and they think the only way to implement discovery and monitoring in SCOM is to create a service that accesses the API - and then the service is basically a collector in this case, and typically has a handful of
rules (sometimes just one rule) that scrape events on the management server and they are misinterpreted to be alerts coming from some instance.
I turn green when I run into this type of problem, because all this can be accomplished with native modules or managed code that are designed to work very well with SCOM.
I know this doesn't answer your question - it's more a way for me to express my distain for these type of packs.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)
Maybe you are looking for
-
Currently, my wife and I share the same icloud account. I would like to remove myself from the account. How can I do this?
-
Multiple Apex Listeners on one server trouble with apex-config.xml
I'm using 0C4J to deploy apex on a windows server. I want to be able to have multiple instances of OC4J running pointing to different databases. I've read through documentation and forum posts and this looks simple enough. I've got one instance runni
-
Home button on iPad2 no longer works after iOS 7 upgrade
I upgraded my iPad2 to iOS 7 today. The home button no longer works. I've powered it down and back up as well as restarted it but it's still not working. Any suggestion greatly appreciated. About to fly to China and was looking forward to watching
-
How do I calculate/retrieve the depth of a current node in XSLT?
I mean the number of parent nodes a particular node has, hard coded something like: <root> <child depth="1"> <another_child depth="2"> I do not want to hard code these levels, so i am searching for a way to do it in XSLT. I could not find a function/
-
Error while installing B1 Integration Addon Setup
Dear All, Myself working on SAP B1 8.81 PL 7. Now When I am installing B1 Integration Addon Setup, I am receiving the below error. Failed to install SAP Business One Integration Service. Kindly help. Regards Hitesh Parsawala