Requesting guidance on how best to deal with removal of CreateElementSteps for tables when option to 'script validation for new constraints' is enabled during schema compare

I have a DeploymentPlanModifer subclass that is responsible for removing certain tables from a deployment plan under specific conditions. It is relatively trivial to find the
CreateElementSteps I need and subsequently remove them via
DeploymentPlanModifier.Remove(), but...
... if in my comparison I have enabled the 'Script validation for new constraints' option, the deployment plan will contain a
DeploymentScriptDomStep with a Batch containing AlterTableConstraintModificationStatements for tables with foreign key constraints. My problem starts here - there will be an orphaned
AlterTableConstraintModificationStatement for each of the tables that I removed. Obviously, execution of the generated script comes to a grinding halt when asking SQL Server to to alter a table that is never created.
I'm able to get around this by digging around in the aforementioned batches and removing the orphaned alter statements, but this seems really hacky, which makes me think I'm missing the proper way of dealing with this.
So... if anyone is aware of a more correct way of avoiding this problem, I would really appreciate finding out more about it.
Thanks in advance for any help. :-)

Hi Greg. Unfortunately there is not an easy solution here. Walking the deployment model, spotting potential issues and excluding them really is what you have as an option here. The alternative is to pre-process the dacpac to have it in the form you want,
but I'm not sure if this is an option in your case and it also has limitations.
Regards,
Kevin

Similar Messages

Malware on my Imac. How best to deal with it?

I seem to have got malware on my Imac OS10.7.5 which appears with selected words linking to third party sites. How do I go about cleaning the Imac from this - is there a recommended and trustworthy software available?
thanks
Nicholas

Download and run the Adware Removal tool from the site below.
http://www.thesafemac.com/arg/
The author is a respected member of the Apple Support Community.

How best to deal with multiple frame rates in storyline?

Hey all, my lack of attention to detail may have cost me hours. I have a movie I am working on and made the stupid assumption that all my clips are the same frame rate. Don't ask why I didn't check - just sheer stupidity.
So now I have numerous clips in the storyline all meticulously edited to sync with other clips, music, the whole nine. Some source clips are 24p while others are 60i. Do I really have to go back and convert each clip individually? I am looking to preserve quality as much as possible, and I know getting 60i to 24p will create some loss, but is there a nice and easy way to do the converting all at once after I complete the storyline?
Thanks in advance. Time to go do something else while I wait for answers...

on playback inside FCPX.
And on export.
you'll notice in the 'Retime Menu' the Option 'Conform Speed' - eg, when I add a 60p clip to my 25p Project, I get a wonderful smooth slomow, due to the 60fps get 'stretched' to 25fps.
if I don't Conform Speed, the 60p get playbacked - in a 25p pProject! - in real time => no slowmo
How 'good' FCPX does the marvel to down-cascade 60i into 24p ... try yourself.
no interlaced material in use here.
quality is in the eye of the beholder ...

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

How does one deal with transparency in a placed file in InDesign?

I suppose this may seem elementary, but I'm relatively new to it so here goes:
First off, my print shop says that placed images should be in EPS format. I'm creating my files in Illustrator and some of them use a gradient mask to fade an object away. When saved as an EPS, the gradient mask shows as a white box instead of fading into the background. When I copy/paste my Illustrator image into a new Photoshop file, save it as a PSD, bring that PSD into Illustrator and save it as an EPS, the whole file is in a white box.
Example. I want those aisle markers to not be in white boxes.
http://i.imgur.com/lZjtu.jpg
How does one deal with transparency in a placed image in InDesign?
Thanks.

If possible, one finds a new printer who can handle your files properly and doesn't insist on .eps.
What format are you delivering to the Printer? If it's anything other than PDF (and that's at their request) all the more reason to reread the first sentence. Why on earth are you moving things from Illustrator to Photoshop and back to Illustrator? Either one of those will save as .eps (ugh), though you need to use a clipping path for transparent areas coming out of photoshop (don't really know how Illy handles it when you say to save .eps with transparent background), but you are FAR better off with either native .AI or .PSD, both of which support transparencey, unlike .eps.If yo are delivering PDF, as you should be, it makes no difference to the printer what format the placed content uses (and it shouldn't matter to him even with native files unless he's hopelessly stuck in the 90s).
In any event, when importing from Illustrator, make sure to show the import options and check the transparent background box.

How does Essbase deals with multi-users

How does Essbase deals with multi-users connecting for reading and writing in the same time? How the global coherence of the database is controlled when users are updating dimension and data all together?

For reading, Essbase handles multiple requests concurrently. For metadata (outline) only one user at a time can make and save changes.For data, Essbase uses a block level locking mechanism, which implies that an update to a block can only be done by a single update request, but other blocks in the database are still updateable by other users.Hope that helps.Regards,Jade---------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

How do I deal with constant "error loading content" messages?

I'm constantly seeing error messages on my Apple TV (2nd gen) on content I easily watch on my other iDevices. What gives? This thing is rapidly becoming a vy expensive paper weight. Possibly the worst Apple product I've yet purchased. Am I alone in this? What can I do?

You cannot connect to TC using USB.
Plug the TC into the computer using ethernet.
Press and hold the reset button on the TC for about 10sec.. until front led rapidly flashes.. release it.
Open the airport utility and make sure you can locate the TC. Check the disk page that the disk started up without errors.
When you say
Sodrawi wrote:
How do I deal with the error message at my Time Capsule saying "There is a problem to connect to server xxxx-Time-Capsule.local."
I am guessing you mean Time Machine.
If TM still cannot find the TC disk.. reset TM and redo the setup.
Read A4 here.
http://pondini.org/TM/Troubleshooting.html

HT1420 I purchased new computers twice within the same year because they old were damaged in a storm. However, I can't deauthorize/reauthorize the new computers. How do I deal with this situation.

I purchased new computers twice within the same year because they were damaged in a storm. However, I can't deauthorize/reauthorize the new computers because it has been less than a year. How do I deal with this situation?

BrianBlaze wrote:
I have 3 Computers at home, I am studying computer sciences and am constantly rerformatting my computers, installing windows and linux over and over again.... EVERYTIME I reformat I have to authorize the same computer and so it takes up one of my 5 authorized computers... Anyways after deauthorizing all my computers in september I was not aware I couldn't do it for another year (why does APPLE assume these stupid tactics prevent piracy). Anywysw I need to reach apple and have them make it so I can do it again. I had a similar problem with Playstation and when I called them they fixed it for me... even windows (which you can only have one serial per computer) made it easy because all I had to do was call them and they fixed it for me. Now I need APPLE to do the same and this is the only place I could see to actually say what is going on... I can't believe I have to do this with my iPhone... I wanted an mp3 player and a phone together and if I can't put new songs until September 20, 2012 I am going to freak out!
HELP!
Brian
Try this link: http://www.howtogeek.com/howto/23974/beginner-deauthorize-all-computers-associat ed-with-your-itunes-account/

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Adobe always quits unexpectedly in Mac when I read a bit fast. How can i deal with it, plz?

Adobe always quits unexpectedly in Mac when I read a bit fast.
It is the latest update.
How can i deal with it, plz?

You posted in the forum for iPad and iPhone (different app). I've moved your question to the Reader forum for desktop/laptop computers.

How can I deal with an apostrophy

My simple questions is how can I deal with an apostrophy when I trying to save to the table, here is an example in how I am saving.
'Sandr'as Casa' this gives me an error message. I have to do it like this
Strings.replace("Sandr'as Casa"," ' "," ' ' "), a package function
SQLDesFollow = "UPDATE [CRVMReq] " +
"SET [SkillSet]='" + Strings.replace("Sandr'as Casa"," ' "," ' ' ")+ "'" WHERE [ReqId]='" + ReqValuesReqId[4] + "";
dbs.execute(SQLDesFollow);
SQLDesFollow = "UPDATE [CRVMReq] " +
"SET [SkillSet]='Sandr'as Casa' WHERE [ReqId]='" + ReqValuesReqId[4] + "";
dbs.execute(SQLDesFollow);
any help will be appreciated.

Here is the magic word: PreparedStatement.
Start here:
http://java.sun.com/docs/books/tutorial/jdbc/basics/pr
epared.htmlSeconded, thirded and fourthed.
And if later readers of this thread feel that they would like to provide another answer then they should think again because they would be wrong.
There is only one correct answer to this question. PreparedStatement.

How can I deal with long sql by the oo4o?

I am using VB and oo4o to develop a sql executor which is a extention of an old system.
For some reason, I have to use oo4o v8.1.7 to deal with Oracle Database 8i to 11g.
But when I send a very long sql(11KB) to it I got a error in the VB enviroment.
The Err.Description is "automention error. Started object is disconnected by the client.".
The Err.Number is "-2147417848 ".
The sql that I send it to the program is a simple select sql that like select a, b, c, substrb(d, 1, 2), substrb(e, 2, 3) .... from A_TBL where A=aa;
This sql is normally executed by the sqlplus but I got an error by the oo4o.
When I insert a '' between the 30Xth items, it got exectuted normally.
ex. select a, b, c, substrb(d, 1, 2), substrb(e, 1, 2) ..... substrb(303th, 3, 4), '', substrb(304th, 1, 2) ... from A_TBL where A = aa;
How can I deal with this problem? Thanks.

So how can use this function correctly?By learning what exceptions are, how they're used, and what you can do to deal with them. There's a tutorial here: http://java.sun.com/docs/books/tutorial/essential/exceptions/index.htmlAnd here's a quick overview:
The base class for all exceptions is Throwable. Java provides Exception and Error that extend Throwable. RuntimeException (and many others) extend Exception.
RuntimeException and its descendants, and Error and its descendants, are called unchecked exceptions. Everything else is a checked exception.
If your method, or any method it calls, can throw a checked exception, then your method must either catch that exception, or declare that your method throws that exception. This way, when I call your method, I know at compile time what can possibly go wrong and I can decide whether to handle it or just bubble it up to my caller. Catching a given exception also catches all that exception's descendants. Declaring that you throw a given exception means that you might throw that exception or any of its descendants.
Unchecked exceptions (RuntimeException, Error, and their descendants) are not subject to those restrictions. Any method can throw any unchecked exception at any time without declaring it. This is because unchecked exceptions are either the sign of a coding error (RuntimeException), which is totally preventable and should be fixed rather than handled by the code that encounters it, or a problem in the VM, which in general can not be predicted or handled.

How do I deal with the"new itunes library" fiasco

how do I deal with the "new itunes library" fiasco...?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

Requesting guidance on how best to deal with removal of CreateElementSteps for tables when option to 'script validation for new constraints' is enabled during schema compare

Similar Messages

Maybe you are looking for