Requesting help with a time/date synchronization problem--thanks

I'm having a bear of a time trying to get my desktop outlook to synchronize with my 8820 blackberry. Running XP and Outlook from Office 03. Date/time show correct on my desktop and on the device but, every time I synchronize, the calendar seems to get messed up with hour shifts on different entries. Sometimes I can see a time appear on the "details" screen when I'm synchronizing that is an hour off from the time that is on the device? Any ideas? Many thanks.

Sorry--meant to also say that I had reviewed the most recent similar thread on this. In addition to both the PC and device having the right time, I did confirm both are set to the same time zone. Really stumped on this one--thanks again.

Similar Messages

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

B2MML with real time data

Hi All
I want some B2mml files with real time data.
So exact( maintenance infromation and Production) B2MML that is coming from MIS.
So if anyone have some information regarding this please tell me.
Thanks in Advance
Ramshanker

Hi, Ramshanker.
In the cases where the plant system is directly delivering B2MML documents (such as with certain products from Wonderware, Siemens, and some others), using the data in xMII is quite straightforward.
1) If the B2MML message is not "standard" B2MML (be aware that very few plant vendors use the baseline standard - most have a number of specific extensions), you can add the vendors' schemas or B2MML example documents to xMII by adding them to a ReferenceDocument folder on the server.
2) In xMII BLS, create a transaction (let's assume you called it B2MMLHandler) with one input parameter, of type "XML" (let's assume you called it "B2MMLDocument"). Add a "ReferenceSchema" or "ReferenceDocument" action, and configure it to load the vendor's B2MML format. Use the "assign reference document" menu option to assign this format to the transaction input.
3) You can now use the B2MML document to perform analytics or to map from the B2MML document into any RFC or BAPI calls or ESA service calls from within BLS.
4) The plant system system should "post" the XML data to an xMII transaction using the "Runner" URL as in:
http://<yourserver>/Lighthammer/Runner?Transaction=B2MMLHandler&InputParameter=B2MMLDocument
Of course, if the MES system isn't capable of posting the documents and they are available on the file system, you can use the xMII file actions (or remote file access via FTP) to access and load the B2MML documents, perhaps at a scheduled interval.
Hope this helps get you started in the right direction.
Best regards,
Rick Bullotta

Our version of ID saves all files with the time/date of December 31, 1999. How do we fix this?

Our version of ID saves all files with the time/date of December 31, 1999. How do we fix this?

That's interesting. The file date should match the system date. What's the system date? What version of InDesign? What operating system?

Problem with Real Time Data Acquisition

Hello,
I tried to built a RDA data flow according to the SAP-Help and this blog (/people/kamaljeet.kharbanda/blog/2006/11/13/real-time-data-acquisition-bi2004s), but I ran into a problem. Everything seems to be fine, but even though the daemon is running no new data is added to the DSO. I'll explain in detail what steps I took and hope someone can pinpoint my error(s).
System is BW4 on SPS 17. My datasource as well as my DSObject are in the same system
1.) Created a transparent table with a timestamp-field for generic delta as a local object.
2.) Created a generic datasource from view/table (used the above table), marked it as realtime-enabled and used timestamp as delta-specific field.
3.) Replicated the metadata for my datasource and activated it.
4.) Created a Data Storage Object with infoobjects corresponding to the table fields
5.) Created a transformation between DataSource and DSO
6.) Created a DTP from Data Source to DSO. The type is realtime-DTP.
7.) Created an InfoPackage for Delta-Initial Load. Update mode: Initialize Delta Process -> Initialization with Data Transfer.
8.) Then I changed my DTP (step 6) to "normal DTP" and executed it. Then activated the data in the DSO. The datasets from the table (which i filled with an ABAP-program) were successfully loaded and activated. So now my DSO contains 5 datasets.
9.) Changed the DTP back to "realtime DTP"
10.) Created an InfoPackage for RDA. Adapter is set to "Realtime extraction from SAP System"
11.) Created a daemon, assigned the IP for RDA and the DTP to the daemon and started it up.
12.) Executed my ABAP program to added 3 datasets to the table which is used as a datasource.
So now in my source table there are 8 datasets, but the daemon won't load them. In my RDA-Monitor (trx rsrda) it shows my daemon, the assigned IP and the assigned DTP (status green). Under the IP there's one yellow request (that should be right according to the help), but unlike the picture in the blog (link see above) there's no request under the DTP.
Job overview (sm37) shows an active batch job and some jobs that are ready (every 10minutes a new batch starts and the old one is closed). the job log shows, that the daemon runs, but loads no data...
i think it might be a problem with the delta extraction somewhere, because the intial load works fine and there are no errors anywhere.
Edit: perhaps my settings in the data source unter tab: extraction are wrong?
Delta process: AIE After Images By Extractor (can't change that)
Direct Access: Allowd
real Time: Real-Time DA Supported
Adapter: realtime data extraction (also tried Access to SAP Data through Service API which seems senseless)
Data Format: Fixed Lenght
Anyone can explain what those fileds mean and which one i should use?
Edited by: Christoph Jender on Apr 10, 2008 2:48 PM
Edited by: Christoph Jender on Apr 10, 2008 3:33 PM

Hi again, another thing i'd like to try is to just active a business content datasource which is realtime-enabled and has the ability to dynamically add some values so that i can test if it works. but i have no idea what business content would be applicable here, any ideas on that perhaps?

I need help with this Time Capsule and External HD problem!

my time capsule is working perfectly and i decided to hook up a seagate 500 external hd thru the usb on the back of the time capsule!
well i can see both drives on my macbook and i can transfer files from my mac to both hd with a breeze
one major problem i cannot extract files from my external hd only put files in! i tried checking the setting and everything but with no avail! anyone have this problem and how did they fix it? thank you!
Message was edited by: aphextwin007

Try connecting another USB storage device to the TC - HDD or memory stick. Format the device while it's connected to the TC, then try writing and reading to it.
It does seem very odd that you can write to the HDD but not read from it. Presumably when you copy files to it they appear in Finder - you can see them OK? Do they appear to be the right size ("get info", or click in "columns" view). What exactly happens if you try to drag them back to the desktop?
I can only think that you may have a hardware or formatting problem, hence trying a different, freshly formatted, drive.

Urgen: SRM and BW user data Synchronization problem

Dear Buddies:
I'm a BWer in a SRM project. These days I meet a very strange problem in the user data Synchronization configuration between SUS and BW system.
The symptom is:
I config the user data Synchronization parameters in SUS system:
SAP Reference IMG u2192 Supplier Relationship Management u2192 Supplier Self-Services u2192 Master Data u2192 Maintain Systems for Synchronization of User Data
Here I've maintained the BW logical system and filled the 'FM BPID' field with 'RS_BW_BCT_SRM_SUS_USER_BPID', and filled the 'Function Module for creating user' field with 'BAPI_USER_CREATE'.
The function of the config above is that:
When a new user is created in the SAP SUS system, it will automatically be created in SAP BW, too.
At the same time, an internal table (SRM_USER_SUPBPID) is filled automatically. The table contains the assignment between the automatically created SAP BW user and the corresponding Business Partner ID of the supplier company.
Then I test the user creation in SUS on web. I found that when the SUS user created , the same user is created automatically in BW system. That means the 'BAPI_USER_CREATE' is work.
But the content of the user-BPID mapping table 'SRM_USER_SUPBPID' is still empty. That means the FM 'RS_BW_BCT_SRM_SUS_USER_BPID' is not work at all.
Anybody met with similar problem? Or any suggestion do you have pls kindly show your solutions, Thanks!!

No solutions? I need your support my friends.

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Help with XML, display data on swipe/click

Hello.
I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
stop();
var nameArray:Array = new Array();
var countryArray:Array = new Array();
var portraitArray:Array = new Array();
var flagArray:Array = new Array();
var jobtitleArray:Array = new Array();
var imageNum:Number=0;
var totalImages:Number;
//Load XML
var XMLURLLoader:URLLoader = new URLLoader();
XMLURLLoader.load(new URLRequest("recbook.xml"));
XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(event:Event):void {
var theXMLData:XML = new XML(XMLURLLoader.data);
totalImages=theXMLData.name.length();
for (var i:Number =0; i < totalImages; i++){
//push xml data into the arrays
nameArray.push(theXMLData.name[i]);
countryArray.push(theXMLData.country[i]);
portraitArray.push(theXMLData.portrait[i]);
flagArray.push(theXMLData.flag[i]);
jobtitleArray.push(theXMLData.jobtitle[i]);
//data is processed
loadData();
function loadData():void {
var thisPortrait:String = portraitArray[imageNum];
var thisCountry:String = countryArray[imageNum];
var thisName:String = nameArray[imageNum];
var thisJobtitle:String = jobtitleArray[imageNum];
var thisFlag:String = flagArray[imageNum];
var dataLoader:Loader = new Loader();
dataLoader.load(new URLRequest(portraitArray[imageNum]));
dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
function dataLoaded(event:Event):void {
//I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
   portraitUILoader.source=thisPortrait;
   flagUILoader.source=thisFlag;
   selectedName.text=thisName;
   selectedCountry.text=thisCountry;
   selectedJobtitle.text=thisJobtitle;
//add to imageNum (1);
imageNum++;
if (imageNum < totalImages) {//stopping at img2
trace("imageNum " + imageNum);
trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
loadData();
trace("Total Images " + totalImages);
//click to move past the home screenI'd like to ditch this. don't know how.
homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
function goNext(event:MouseEvent):void
nextFrame();
*/here's the output:
imageNum 1
image name (thisPortrait) images/img1.jpg
imageNum 2
image name (thisPortrait) images/img2.jpg
imageNum 3
image name (thisPortrait) images/img3.jpg
Total Images 4
Total Images 4
Total Images 4
Total Images 4
It starts the display on image 1 (the second in the series img2.jpg)*/

Thank you.
That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
new output after moving the increment:
imageNum 0
image name (thisPortrait) images/img1.jpg
imageNum 1
image name (thisPortrait) images/img2.jpg
imageNum 2
image name (thisPortrait) images/img3.jpg
imageNum 3
image name (thisPortrait) images/img4.jpg
TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()

Help with "gapless plaayback " and "syncing" problems

ok....i just restored my ipod to factory settings after it would restart at random intervals. After everything was erased, it loaded only my playlists, and then went on a "analyzing gapless playback Info" for a bit, then upload 2 or 3 more songs, then pop up an error message saying that "SONG "a" COULD NOT BE IMPORTED TO CRUCHIES IP" and would not load anymore songs. then, it would start cutting songs in half to different tracks..i only have 325 out of 3000 and i am angry.i need help with this... i dont want to have to re-install itunes, because i figure it would erase my perchases fron the itunes store.?/?/?/? or do i not haave a choice? has anyone else had this problem??? please give any info you can.

*I'm at work at the moment*
I bought 2 kits of the Corsair value ram (see sig for part number), 512 mg sticks, total 4 sticks. When you say just put 2 matching ones in, I think I did that. I tried 2 sticks at a time, switching them out so I'm pretty sure I tried all combinations of them and the pc wouldn't boot using 800fsb and 667 ram speed. It will boot and run ok at 667 FSB and 400 ram speed, because I've been using it like that since about the 2nd week of Nov. Will try again to just boot using 2 mem modules at full FSB/Mem speed but I know I've tried that before and the pc would lock. Not for sure what you meant by 'matching' as all 4 are the same brand/model etc.
As for the EIT? or whatever it was, I don't recall clicking that anywhere , is that a BIOS option? I'll check when I get home but I'm not recalling choosing that option. Google showed that to be some some of processor power saving option or something.
As for linking where I bought them at, I got them from Newegg. Newegg doesn't have the MB anymore, they have a refurbished unit but here's the link to the MSI page
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=663 , here's a link to the refurb one on Newegg
http://www.newegg.com/Product/Product.asp?Item=N82E16813130501R
The ram is http://www.corsairmemory.com/corsair/valueselect.html#ddr2dimm the 2nd one under pc2-5300, the VS1GBKIT667D2. I bought 2 of those kits. Newegg link http://www.newegg.com/Product/Product.asp?Item=N82E16820145568
What I've read on the support pages, MSI supports that ram and the ram shows that MB as being supported.
Appreciate the replys.

Need help with new Time Capsule/Airport express setup!

I just hooked up a 500g time capsule to replace an airport extreme, and now my airport utility on my MacbookPro Retina no longer recognizes the airport expresses I had on my network for airplay purposes. Can anyone help with this issue?

Instead of a switch you need a wireless router, because your modem will only assign one public ip address to the switch and that ip address will be forwarded to any one computer at a given time...You should replace the switch with a wireless router and it should resolve your concern...

Little help with FORM POST data not in UTF-8 (JSP/servlet)

Hello,
I am trying to update a MySQL database record with UTF-8 characters with my JSP application.
1) I have MySQL correctly configured to handle UTF8 and have tested insert/update/select with UTF8 characters
2) I have an "editRecord.jsp" page. At the top of the page, I specify:
<% request.setCharacterEncoding("UTF-8"); %>
3) I have an input form which is specified in that page which follows:
<form action="<c:url value="/updateRecord.jsp"/>"
name="updatetForm" method="post"
ACCEPT-CHARSET="UTF-8"
enctype="multipart/form-data">
4) I have a servlet filter that takes every HttpServletRequest and modifies that object in
doFilter(...){
request.setCharacterEncoding("UTF-8");
chain.doFilter(...)
5) In updateRecord.jsp, I fill a JavaBean with the form data. Here's an example of the form input:
name = Company
Comments=Here's some unicode text: "يني إن بلاده م
6) When I put a breakpoint and inspect the contents of the UpdateBean after posting the form, running the request through the filter, I see
I see:
name = Company
Comments=Here's some unicode text: ��...."
Where could I possibly be missing something to force UTF8 encoding of these values?

If you have to use the following code to fix the encoding:
String value = new String(item.getString().getBytes("ISO-8859-1"), "UTF-8"); ...
then you are just putting a band aid on something that is broken somewhere else (since this code creates a byte array in 8859-1 and then creates a string from that byte array, but assuming that the array is encoded in UTF-8). That will only work if the string you start out with is mangled.
In many cases such a fix will actually "work" (in the sense that you may end up with something that is correctly encoded in the end), but you run the risk of breaking if the source of the original corruption is removed.

Request Help With Oracle BI Apps 7.9.x development license

Request some one from Oracle to PLEASE help with the following query or help me to move the post to right forum.
I have downloaded BI Apps 7.9 to load it on top of BI EE. These are received from Development Downloads under OTN site (not eDelivery). Both these are planned as development install on one machine with sufficient specs on Windows 32 bit platform.
BI EE is loaded and starts successfully. Then switched of the services and started to load BI Apps CD1. Done it successfully. Next while starting to install Informatica PowerCenter 7.1.4 it asks product license key. Please help to know where to get this key? Also please help with any connectivity and options key, as well as those for any other products, related to this objective.
Many thanks,

Hi RAJC,
Many thanks for the suggestion. I have moved past that aspect now with this help. Have also verified that everything is working well with BI server, presentation services, scheduler server etc. Admin tool works fine.
But have difficulty connecting DAC client to the database. The login window does not bring up option to select suitable driver for connecting to Oracle Database 10.2.0.x Also, wonder what table owner name and pw will work here? are they the same as those for schema owner? that is sh.rpd etc? The BI apps version is 7.9 and BIEE is 10.1.3.3
Thanks

Help with excel grouped data and sorting to keep data intact

I have a master spreadsheet with lots of data. I am trying to grouped the data based on physical address/city, add the values and once done sort it by valuation based on descending order by valuation but my data keep messing up.
So in Row 1/col A: Address 1; Col B City: XXX; Col C: Valuation $$$
Row 2/col A: Address 1; Col B City: XXX; Col C: Vauation $$$
Row 3/col A: Address 2; COl B City: YYY; Col C: Valuation $$$
SO I sort by city and in ROw 1/2 same city with same address, I grouped it. THen I created a new row below Row 3 and add up the grouped data (i.e. ROw 1 and 2). I go through the entire list to finalize the grouped locations.
But when I am done and I sort by Valuation, all my data messed up coz I created a new row with addition of grouped location valuation and the formula gets messed up.
Any one with ideas please help. My deadline for this project is just a week away and I am freaking out.
THanks in advance.

it seems upload a sample is more clearly about the required.
KR

Help with quick time video on iphone

Received e-mail on iphone with quick time video.Will not play.Do I need to donload quick time on iphone or is there a app for that????

Import it into iTunes and create an iPhone version. In iTunes highlight the video, then Advanced>Create and iPod or iPhone Version. Sync this version to your phone.

Requesting help with a time/date synchronization problem--thanks

Similar Messages

Maybe you are looking for