Requesting license for two different ssystem with same SID

Hello,
Is it possible to request 2 license for two systems with same SID. The systems are on different machines and their HW key are different but both have same SID. While requesting license, will it permit to create 2 different license with SAME SID.
Regards
Deb

Hi Anil,
The one for which the license is already requested is the main development portal with SID EP2. I have installed one local version of SAP EP with the same SID EP2. Now we need a license for the second system.
If we change the HW key of the original license which is already applied in the main development portal under SMP and apply for a new license for the new local version, can it have any future implications, if any.
What is the best way to deal with the situation. Is there a full proof way to change the SID of the EP system, which I can try in the local EP system.
Regards
Deb

Similar Messages

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

Creating Keyboard shortcut for two different actions with same menu name..

Am using soundforge pro .. I have to process nearly 1000 audio files, and want to create shortcuts for "Smooth"
The problem is there are two Menu names named "Smooth"
Fade In > Smooth
Fade Out > Smooth
I want to assign different shortcuts for each one.. Is it possible ?
Any help is appreciated

Hi,
I would use IP Address range boundaries instead which I normally do anyway instead for the AD site.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

Different Bank charges GL account for two company codes with same COA

Hi,
While configuring OBXK ( Automatic GL account for bank charges) , I see there is provision to enter only one GL account per chart of accounts.
We have two company codes using same chart of accounts but different bank charges GL account. Please tell me how to configure this.
Thanks,
suresh

Hi,
Thanks Krishnan and Chandra.
I agree with you it could be the same GL account for bank charges, but the business requirement is such that in one of the two company codes, bank charges are required to be tracked separately to be subsequently transferred to the other company code. This means two separate GL accounts are required for two company codes which needs to be configured in OBXK.
Hope this clarifies my query further.
thanks,
suresh

Different timeout for two protected applications with same AM 7.1

I have a AM 7.1 configuration planned.
We need to protect two different application url's; And provide different session & idle timeout for each of these url's.
Can we configure different timeout for two protected URL's / applications configured with same AM 7.1 ?
/Kasi

Hi,
I have not actually configured this, but you can create a policy for that application with an "Active Session Time" condition.
You also have an option there to destroy or not the session.
But if the user is allowed to do SSO between the 2 applications then you should consider if you can destroy the session or not.
Hope this helps.
Andrei

How to use same DFF for two different forms with :BLOCK.field reference

Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

How to work with two different backend with same MI Server and war file

Hi All,
We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
Your help in this regard is highly appreciable.
Regards
Murthy

Hi Murthy,
I try to get my head around the question:WHY?
The reason for my question is, that this influences the answer!
Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
- First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
- Change the two files you mentioned above.
This should be all then.
If you have a look into the implementation for MAM001Impl for example, there you find a line like:
private static final String SYNC_BO_NAME
= ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
MAM30_040 = zMAM30_040
will result in MAM uses the zMAM BOs.
Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
MAM30_040 = MAM30_040
MAM30_040 = zMAM30_040
if will only take the first reading.
But I think this is clear to you anyway
Regards,
Oliver

Two Apple ID's for two different people on same computer causing issues

My husband and I have two different Apple ID's on our main computer. I tried to download some items I bought but I keep receiving a message that if I download from another ID I wouldn't be allowed to download past or current purchases from another ID. How can we both use the same computer with our separate ID's, make purchases and download those purchases?

A computer or device can only be associated with one Apple ID at a time. This is why you get the error. If you continue to wsitch from one account to another and keep downlaoding, you will trigger the 90 day limit. When taht happens, you need to wait for 90 days before you can switch users.

Problem in importing two different classes with same name...

I have to import two different classes in my program with the same name....
import org.apache.lucene.document.Document;
import org.w3c.dom.Document;
//    I AM USING THE DOCUMENT FROM W3C PACKAGE HERE....
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                 DocumentBuilder builder = factory.newDocumentBuilder();
                 InputSource is = new InputSource( new StringReader( tempString ) );
                 d = builder.parse( is );
                 NodeList images = d.getElementsByTagName("img");
                 int length = images.getLength();
                 for(int i = 0;i<length;i++)
                     Node image = images.item(i);
                     String tempAltText = image.getAttributes().getNamedItem("alt").getNodeValue();
                     altText = altText.concat(" ").concat(tempAltText);
                 }and the error i am getting is
[javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:20: org.apache.lucene.document.Document is already defined in a single-type import
    [javac] import org.w3c.dom.Document;
    [javac] ^
    [javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:132: incompatible types
    [javac] found   : org.w3c.dom.Document
    [javac] required: org.apache.lucene.document.Document
    [javac] d = builder.parse( is );
    [javac] ^
    [javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:133: cannot find symbol
    [javac] symbol : method getElementsByTagName(java.lang.String)
    [javac] location: class org.apache.lucene.document.Document
    [javac] NodeList images = d.getElementsByTagName("img");
    [javac] ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 3 errorsany idea ..how to resolve it
Edited by: ping.sumit on Jul 16, 2008 3:39 PM
Edited by: ping.sumit on Jul 16, 2008 3:40 PM

now i changed the code to
import org.apache.lucene.document.Document;
import org.w3c.dom.Document;
org.w3c.dom.Document d = null;
try{
     System.out.println("in author");
               URL url = new java.net.URL(urlString);
               java.net.URLConnection conn = url.openConnection();
               BufferedReader in = new BufferedReader(new InputStreamReader(conn.getInputStream()));
               while ((in.readLine()) != null)
                    //tempString = tempString.concat(in.readLine());
                    String temp = in.readLine();
                    tempString = tempString + " " + temp;
               System.out.println("the string in author" + tempString);
                in.close();
                DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                 DocumentBuilder builder = factory.newDocumentBuilder();
                 InputSource is = new InputSource( new StringReader( tempString ) );
                 d = builder.parse( is );
                 NodeList images = d.getElementsByTagName("img");and their is only one error i am getting ...and that is
[javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:20: org.apache.lucene.document.Document is already defined in a single-type import
    [javac] import org.w3c.dom.Document;
    [javac] ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 1 error

Different cpuspeednw on two different hosts with same cpu config. Why?

Hi,
there are two hosts.
They are different, but have same CPU configuration (I guess it from the output below).
Host1: Solaris 10, 4 cpu, 4 core in each cpu.
psrinfo -v
Status of virtual processor 0 as of: 03/04/2010 08:57:45
on-line since 12/25/2009 11:03:23.
The i386 processor operates at 2133 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 15 as of: 03/04/2010 08:57:45
on-line since 12/25/2009 11:03:25.
The i386 processor operates at 2133 MHz,
and has an i387 compatible floating point processor.
Host2: CentOS 5.3. Also 4 cpu, 4 cores in each spu
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E7320 @ 2.13GHz
stepping : 11
cpu MHz : 2133.413[b]
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca c
mov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constan
t_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4270.09
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
processor : 15
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E7320 @ 2.13GHz
stepping : 11
cpu MHz : [b]2133.413
cache size : 2048 KB
physical id : 6
siblings : 4
core id : 3
cpu cores : 4
apicid : 27
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4266.82
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
QUESTION:
Host1 (Solaris) has cpuspeednw = 700
Host2 (CentOS) has cpuspeednw = 1700
WHY?
What should I do to find out why this is happening?
Edited by: user10944480 on Mar 14, 2010 7:22 AM
Edited by: user10944480 on Mar 14, 2010 7:24 AM

user10944480 wrote:
QUESTION:
Host1 (Solaris) has cpuspeednw = 700
Host2 (CentOS) has cpuspeednw = 1700
WHY?
What should I do to find out why this is happening?
The CPUSPEEDNW is measured in "millions of Oracle operations per second" - but we don't know what "operation" Oracle is using for measuring. Since you have two difference operating systems, it's possible that the "operation" that Oracle uses is one that makes use of the "OSD" (operating system dependant) code and has a very different code path on the two machines that results in a very different speed of completion.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
+"Science is more than a body of knowledge; it is a way of thinking"+
+Carl Sagan+

SID Problem : could not register two ABAP systems with same SID

Dear Expert:
We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
We use rz70 to do this, but we found the lastest registration will overwrite the previous registration,
that
means we could register them both in the same SLD. (we checked this in Technical system area).
How could we do this? It makes us crazy........
Thanks very much
Ray

Dear Stefan,
Thanks so much for your anwser.
But the dilemma is in one SLD we achieved this, but it is only for one case and we could
not apply this for other systems.
This is the snapshot in our SLD for techical system:
Name                                        Host                             Version                                     Last Update
D01   on eisdq01                     eisdq01                         700                                           2010/12/06 12:45
D01   on eisdv01                     eisdv01                         640                                           2010/12/06 11:40
We don't know if this is the illusion that SLD could do this? But for other systems, e.g two Q systems
the lastest registration will overwrite the previsou one.
Thanks very much.
Welcome suggestions from very guru.
Ray

Different material group for two CO companies with same material no.

Hi all
We are implementing another CO company in COPA. The issue is that both companies use the same materials number, but in COPA grouping categories (MATKL) must be different . I was thinking in using another category, but is there another option?

Hi,
By definition the materials should have the same material group (operationg concern - same market grouping).
However, if you have this as business requirement you need to first identify a field to store this. and then you an also use exit / derivation rule to replace the value with a condition on the company code. Advantage you have reduced the use of one more characteristic in CO-PA.
Hope this helps you.
Varadharajan

Confusion of aliases made for two SMB shares with same folder name

I have a SMB file server here which provides me with a Departmental personal home filestore and also a Departmental personal web filestore. The name of the folder is the same in each case - my Departmental user name. If I check the Finder Preference 'Show these items on the desktop' for 'Connected servers', I can use the Finder's 'Connect to Server' for each - smb://webhome/john and smb://home/john - to make each of them appear on my desktop as 'john'.
It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.
Alas, each alias always points to the same (apparently randomly selected) share!
This looks like a bug to me. I've tried unchecking the Finder 'Connected servers' preference, and then the shares appear under folder 'SHARE' - where I cannot create any aliases at all; I get the error message 'Operation could not be completed (Error -8058)'.
Reader, do you know of a work-around which will let me distinguish on my desktop between my two identically-named folders from different shares? Alas, I have no power to change the names of the original folders.
John A. Murdie

+It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.+
I should have said that one cannot rename the share icons in the usual way. Not being able to do this is the real bug here. If I'd been able to do this I wouldn't have need to try to create aliases, of course.
John A. Murdie

Where statement on two different tables with same column name

Hello,
I have 2 financial tables:
tblincome, tblexpenses
in each table I have column name "monthPayed" (have values of all the months of the year).
I would like to create a balance view table that will show me the financial status for the Q1 (for example).
I have a column totalIncome and totalExpended respectively.
I've create a view table that shows me the financial balance at the moment but I want it to be devide to Quarters of the year...
Regards

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Where is the code you already tried? Or are you so lazy, so rude or so privileged that you did not do anything for yourself?
In fact that silly “tbl-” prefix is so bad that it has a name! It is called Tibbling and Phil Factor even wrote a humor article on bad programmers that use it.
Your narrative is vague; it sounds like this is the DDL:
CREATE TABLE Incomes
(payment_month CHAR(10) NOT NULL PRIMARY KEY,
income_amt DECIMAL(12,2) NOT NULL
CHECK (income_amt > 0.00),
CREATE TABLE Expenses
(payment_month CHAR(10) NOT NULL PRIMARY KEY,
expense_amt DECIMAL(12,2) NOT NULL
CHECK (expense_amt > 0.00),
>> in each table I have column name "monthPayed" (have values of all the months of the year). <<
I hope not! 2014 has not gotten to September, November or December yet! And the ISO-11179 data element name should be “payment_month”; but it is still wrong! An expense is not a payment! An income is not a payment!
>> I would like to create a balance view table that will show me the financial status for the Q1 (for example). <<
Report Period Table
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Something_Report_Periods
(something_report_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (something_report_name LIKE <pattern>),
something_report_start_date DATE NOT NULL,
something_report_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (something_report_start_date <= something_report_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
Now figure it out for yourself, show us what effort you put into this, then we will help you.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Requesting license for two different ssystem with same SID

Similar Messages

Maybe you are looking for