Requesting License key for NW04s Cluster Portal

hi,
      We have installed NetWeaver 04s Clustered portal. (1CI +  1DI ).
While requesting the License key with SAP, do we have to follow the same method (as that of stand-alone) for <b>Clustered NW04s portal</b> also?
OR is there any other method ?
Which System Name we have to specify Node01 or Node 02 ? or both ?
Is there any <b>specific</b> SAP note for <b>clustered</b> Portal Licensing ?
Regards
Sunil Kulkarni

Hi Sunil,
Check this weblog:
Enterprise Portal 6.0 licensing behavior in a hardware cluster installation
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Similar Messages

  • Request License key for Install ECC6

    Dear Sir:
    I had installed the IDES mySAP ERP 2005, and willing to request a license key from the SAP web page,
    but on the step 1 "Select Installation ", there is no ECC6 relative could be choose.
    My question is if the installation should be registered by SAP? or should I do something else?
    Sincerly need your help.
    The information about installed machine is listed below:
    Operating System: Windows Server 2003 with service pack 2
    Database: Oracle 10g release 2
    SAP product: IDES mySAP ERP 2005
    Active Hardware Key is R0558308287
    We also have an installed Solution Manager system for generating the install key.
    Our company name is Everscience Information System Co.
    Thanks and Best Regards

    Hello Frank,
    The first thing to do is make sure that you have an installation number for an ECC 6 system. If you have an installation number for this already then you can request a license for this system under this instalation number on the sap service market place.
    http:
    service.sap.com\licensekey
    However you have said that your previous system was IDES mySAP ERP 2005. If so it is unlikely that the installation number you have for this system is valid for the license for the new system. In this case you need to contact your local contracts department and request the appropriate installation number.
    Once you have the installation number you can request the license at the site above. Requesting a license is a self service on the market place.
    Regards,
    David

  • How do I get evaluation license key for linux NW04s installation.

    Can anyone help please.
    I am going through this site on linux , but there is no link to get the evaluation license key for NW04s.
    I downloaded all the binaries.
    Thanks.
    TK

    hi,
    on the installler DVD, you should find README or INSTALL file. You could get from there about the link to extend your eval key.
    ardhian
    http://ardhian.kioslinux.com
    http://sapbasis.wordpress.com

  • License Key for Enterprise Portal 6

    Hello,
    I have an Enterprise Portal 6.0 SP19 with Web AS 6.40, and I am trying to find what license key my portal has , so I don't know where to find that information.
    Can anyone tell me where can I find the license key for my portal ?
    Thanks
    Luis
    Rewarding points will be given.

    Thanks Michael , this solved the issue.I gave you rewarding points for the answer
    Luis

  • Requesting a license key for WEBAS 640 SP9

    guys
    i am trying to request the license key for my webas my temp one has already expired. i cant seem to find my hardware key ,i tried looking in configtool but i cant seem to find it can you guys help me out please?
    thanks,
    Guy

    Make sure the connection is configured as "Direct Connection to Dispatcher" and "Default" transport layer.
    Is your Web AS running on port 50000?
    Also, if you are having license problems and you loose your temp license the Web AS will only run for 30 minutes so start it up and try to connect within that time limit.
    Nick

  • How do I get a license key for Xcelsius Enterprise 2008 sp3

    Hello
    The comapny I work for are partners with SAP, so what is the quickest way for me to get a license key for Xcelsius?
    Thanks
    Eddie

    Hi Eddie,
    You can contact the Customer care or your account manager for the license keys. Incase you have access to SAP portal(service.sap.com) you can request for keys from there as well.
    Thanks,
    Amit.

  • License key for a J2EE Engine standalone system

    Hi,
    I installed a J2EE Engine 7.0 standalone system (at first screen of installation, I selected node <b>SAP ERP 2005 Support Release 2</b> to start the installation of SAP NetWeaver's software units  - not software units of SAP ERP, NOT node <b>SAP NetWeaver 2004s Support Release 2</b>).
    In http://service.sap.com/licensekey, I request a license key for my new J2EE Engine standalone system. At first page, I only see 2 installation options to select, these're corresponding to SAP ERP and SAP SOLUTION MANAGER. I select SAP ERP and at System Information page, I choose SAP product <b>SAP NETWEAVER</b>.
    Then, I install the license key received via Visual Administrator - Server 0  - Services - Licensing Adapter. But 28 days bypass, system get down because of license expiration (not relates to the date validation).
    The same thing happens when I make other license keys by choosing SAP product <b>SAP WEB AS</b> and <b>SAP ERP</b>.
    Someone tell me what's wrong?
    Thanks,
    Toan Do

    Hi Toan,
    I hope you are following the procedure given in the above mentioned link (which i gave).
    In the Visual Administrator choose Server 0  --> Services --> Licensing Adapter. The system data that you need to request the license from the SAP Service Marketplace appears.
    ¡        Installation number (if it exists)
    ¡        System ID,
    ¡        System number (if it exists)
    ¡        Hardware key
    ¡        Current release
           2.      Under the Internet address service.sap.com --> mySAP Business Suite, you can get to the initial page of the license key requests in SAP Service Marketplace. Here you will find all the information you need to request license keys.
           3.      Enter your e-mail address in the request. The license key will be sent to you promptly by e-mail. Alternatively, you can also download the license key from the SAP Service Marketplace.
    Do not make any changes to the license key. To import the license key, the file must not have been changed.
           4.      In the Licensing Adapter in the Visual Administrator choose Install License from File.
           5.      Select the license file that you want from SAP.
    If this doesn't solve your issue, I suggest that you post a message with SAP.
    Regards,
    Siddhesh

  • License key for  "SAP NetWeaver 2004 - Trial Version on Linux"

    I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
    Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
    Please can You help me?

    Hello
    yu can download abap trail veriosn from this link
    but u have to create a/c in dsn.sap.com
    link is as below
    https://www.sdn.sap.com/irj/sdn/nw-downloads
    1)SAP NetWeaver 7.01 - ABAP Trial Version
    2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
    3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
    that will hepl out 100 %
    Regards
    Jayesh

  • Do we need License Key for SAP IK

    HI,
      Do we need to request for  License Key of SAP Integration Kit and add in License Keys in CMC of BO EDGE 3.1.
      Early response is appreciated.
    Thanks,
    Bharath

    Hi Ingo,
    Thanks foy your reply.
    IS The License Key which we downloaded from Market Place is enough for SAP IK or do we need to Raise a request for New License Key For SAP IK
    Thanks,
    Bharath

  • License keys for mySAP Business Suite

    Hello,
    We have IDES system installed with Oracle database. IDES system was a part of installation of productive system.
    Our license expired 5 days ago. I requested new license from the site and only recieved temporary one. It says:
    "License keys for mySAP Business Suite
    The database you selected has not been licensed under this installation number. "
    What steps should i take to recieve unlimited license?
    If it requires Oracle license, should i order it from SAP or i can purchase it separately?
    Thank in advance.

    HI Naresh
    I did these steps and I upload the license in backend but  the message says:  2 licenses succesfull installed then  in the list of license
    there are two red trafic light
    ITP     Q1851760771     NetWeaver_DB6     11.08.2009     31.12.9999     Perm     0020310707     000000000310985405     Not yet valid
    ITP     Q1851760771     Maintenance_DB6     11.08.2009     12.11.2009     Perm     0020310707     000000000310985405     Not yet valid
    I don`t know what`'s the problem?
    any suggestion
    Regards
    Danny
    Edited by: Graciela Troya on Aug 13, 2009 12:35 AM

  • Obtaining a trial license key for e-Test

    Hi,
    I have downloaded the trial version of e-Test from empirix website today but haven't received any license key for the trial period. No emails have been sent to the specified email address. I have sent a request to [email protected] (with the host id ) requesting a trial key.
    Is there any other way to get a trial key?
    Thanks

    Hi Marina,
    I would also request a trial license key for e-test suite. I have sent an email to obtain the keys two days ago but I havent received any answer yet. Could you please help me out?
    PS: I'm from Belgium
    Thank you,
    Yoppy

  • Volume License Keys for Non-Profit Organization

    Hello everyone.
    I am in need of a volume license key for Microsoft Office Professional 2010 for a not for profit organization.
    They do not have the I.T. cloud infrastructure in place for office365.
    The organization that I represent is the "Homeless Intervention and Shelter House" (H.I.S. House)
    http://www.hishouseplacentia.org
    Can I contact Microsoft directly to obtain a key or do I have to go through a reseller?
    Thank you.
    Paul La Capria
    Owner, MICRO Technologies

    Hi,
    We mainly provide technical support for Office products in this forum, since your request is about licence and the policy may differ in different areas, I suggest you contact the local customer service to get more appropriate support:
    http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to optain a license key for SAP NW Gateway ABAP?

    The hints in the howto-manual do not seem to work - and they are inconsistent in the sense of: Request for a license key for SQL-Server and being returned a MaxDB key. Also the installation show SAP-INTERN, whilst the ley is for DEMOSYSTEM.
    The key i did receive was:
    Begin SAP License -
    SAPSYSTEM=NSP
    HARDWARE-KEY=C0700372363
    INSTNO=DEMOSYSTEM
    BEGIN=20120212
    EXPIRATION=20120513
    LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMjAyMTMxNzA0MDlaMCMGCSqGSIb3DQEJBDEWBBSv8eBlzmPgKE+T9golPZcWdlpS/zAJBgcqhkjOOAQDBC8wLQIVAKDDrp46jv2TI9CZXMDc7pbCsPblAhR3PvtTPkGcYpBCrh4U57z5qf/QbA==
    SWPRODUCTNAME=NetWeaver_MSS
    SWPRODUCTLIMIT=2147483647
    SYSTEM-NR=000000000311700111
    Installation Number wrong, INSTNO wrong.
    There had been some tricks to get around this issue with the demo of NW 7.02. Also i do not find the Java Stack as promised in the Windows release - i do only find it in the Linux one.
    For 16GB downloads the result was poor. Can anybody help out?
    My best regards
    Joern Brabandt

    Hi Gregor,
    I'm also having issues with the license for the SAP NW Gateway Trial running on Mac Mountain Lion:
    ----- Begin SAP License -----
    SAPSYSTEM=NPL
    HARDWARE-KEY=00938415609
    INSTNO=DEMOSYSTEM
    BEGIN=20130404
    EXPIRATION=20130704
    LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMzA0MDUxOTE0MzFaMCMGCSqGSIb3DQEJBDEWBBTRUCCubDadBbaZ8w3bQ7HF+yb9JTAJBgcqhkjOOAQDBC8wLQIVAJZItJG3PCK1bcAd40eClYgUfp03AhQXiqegi/wlPttvPkrXmJoKP1jOxg==
    SWPRODUCTNAME=NetWeaver_ADA
    SWPRODUCTLIMIT=2147483647
    SYSTEM-NR=000000000311926766
    System accepts the install but says "inactive hardware key". I've reinstalled VMware Fusion 5 and all of the linux and SAP components and still get this error message.
    Thanks in Advance,
    Pete

  • How to add License Key For Integration Tool kit For SAP in Linux Server

    Dear Experts,
    We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
    The Server is Linux Server.
    But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
    So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
    So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
    Thanks & Regards,
    Venkat

    On Unix / Linux you should be able to leverage the response from Raphael and change:
    Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
    For more information verify the below link
    [How do you update the SAP Integration Kit license?;
    Regrads
    Pardhu

  • How Do I get a License key for Trial version from the App Store?

    I downloaded a Trial version of Aperture 3.1.2 a few weeks ago from the App Store. I love it. Now I want to buy it, but, can't figure out how to get a license key from the App Store. When you start up Aperture Trial version, a 'nag' box comes up asking if you want to buy the application or continue using the trial version or Authorize (I guess that is what you would pick once you have the key). If I pick "Buy", the application opens Safari and takes me to the Apple online store, NOT the App store! At the Apple Store, you can buy the key for $199 or an upgrade from a previous version for $99. Whoopie! What is Apple thinking? The App store is selling Aperture for $79.99. I guess that means you don't get the box or written manuals (which I haven't used for any software in many years).
    So how do I get a license key for the App Store version? Do I just Go to the App Store, pay the money, download and install the program over again. Then transfer my trial version library somehow? Then deinstall the trial version? I'd love to buy and use Aperture for $79.99, but, I'm not willing to pay $199 for it.  Apple has me confused.
    Anybody have a clue?

    Thanks for the 1-800 call tip Allen.
    P.S. I'm quite willing to put in the time and effort necessary to learn Aperture (or any other software I decide to use, "Pro" or not). I simply don't see the value in buying the box version when I'm pretty sure I won't be using any paper manuals.  I very comfortable using online help files, having done so as a professional numerical control programmer for many years in my work. For reference, I'm retired, on a limited income and will be using Aperture as a rank amateur photographer who could use a little more horsepower than iPhoto offers.
    I'll call Apple tomorrow.
    Kevin

Maybe you are looking for