Requesting solution for how install Skype to ipho...

Dear Skype support Team,
I have iPhone 3GS (6.1.6V) mobile,im facing problem while try to install Skype app using the App Store, it showing Error massage “my mobile version not support 6.1.6V, its requires iOS 7.0 or later”
Please update me regarding this incident & if any older support version available please provide me How to download and install to my IPhone 3gs device.
Regards,
Randika.

I use Vista, a lot easier, but still helps to pull OS X boot drive during the install.
Format one drive as MBR before you begin and forget using BCA.
Never need to use other than quick format, but I do have to reboot from Vista DVD after formatting before it is accepted.
Acronis True Image 11 won't work.
Gave up on all Norton products though I have not used the latest version Ghost 14 (12 was last I tried) or the new 2009 betas.
Prosoft DataBackupPC seems useful.
MacDrive 7, even the latest is NOT compatible at all with Vista Ultimate 64-bit, it is the worst piece of software and brings Vista to its knees and requires giving up (hard restart) anytime I tried copying. (And it constantly nags).
Paragon-Software 6.4 NTFS driver for OS X works very well and better now than the MacFUSE 3G set.
The Mac Pro is Intel, not IBM, hence, not G5 series. Great machine. Broke my teeth on IBM 360s as the 1401s were being replaced, along with "unit record" equipment

Similar Messages

Solution for bad install files in B1DE

Sometimes when try make install files in B1DE, intall files created but after registration addon not run (Addon is disconnected).
In Your Addon VB Project You can remove WB.pdb, WB.exe, Interop.SBODI_Server from BIN folder, Interop.SBODI_Server from OBJ folder, and WB.exe, nad WB.pdb from OBJ\DEBUG.
Now You have to run this project and make install files in B1DE.
Krzysztof Sala

It's just solution for simple installer
k.s.

Vicious circle for re-installing skype when origin...

I have been having difficulty with Skype recently, so I decided to uninstall it and then re-install... possibly an newer version, I am not sure, but that is not relevant. The point is that when I try to uninstall, I am told that I cannot do it (even when I am running the task as an administrator) because the original installation file is missing. Why and how it went missing is unknown, but it really is, so how can I uninstall Skype?
Trying to download a new installation file doesn't work, as this is blocked by the program with the same error messages.
I have tried all the obvious, and looked through all the suggestions on Skype's board and in the forum, and nothing works.
I have Windows 7, and I do not intend to re-install or update Windows just for this technical problem.
Suggestions?
Solved!
Go to Solution.

Try to clear any currently installed version using this MS Fix It:
http://support.microsoft.com/mats/Program_Install_and_Uninstall/en

A solution for iTunes install problems

I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
The following is what worked for me.
BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
Find, download, install a copy of jv16 Power Tools.
Then:
1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
1b. The Registry is your PCs mind; do not scramble it. You will be sad.
2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
8. Reboot.
Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
Windows XP Try testing your upgrades before releasing them!

Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

Need solution for how to identify excat View in Material master tran (MM02)

Hi,
Can any body help out of this,
I am doing MM02 updation for perticularly a field like Abnormal Quantity field in MRP2 View .
I have done Recording using One material say XXX material so it is working for that material, But here issue is if iam using another material it is going another View like MRP3 because every material having different Material Types.
How to over come this situation is ther any Function modules for this or any other way ?.
please help me out advance thanks.
MK.

Hi Murali ,
For this , just check in the code for material type .
Ask your functional the no. of views each material type would be having .
Now in the code depending upon the material type , execute different BDC code according to number of views .
Its a bit lengthy solution as will increase the coding but will work.

Request solution for ORA-16826

In the physical standby database drcXXXXXX.log,there are lot of warning messages:
DG 2008-10-27-12:28:46 0 2 663690199 Operation CTL_GET_STATUS continuing with warning, status = ORA-16826
DG 2008-10-27-12:28:46 0 2 663690199 Operation CTL_GET_STATUS continuing with warning, status = ORA-16826
DG 2008-10-27-12:29:46 0 2 0 RSM: Redo Apply is running without USING CURRENT LOGFILE option while DelayMins=0
DG 2008-10-27-12:29:46 0 2 0 RSM0: HEALTH CHECK WARNING: ORA-16826: apply service state is inconsistent with the DelayMins property
DG 2008-10-27-12:29:46 0 2 663690216 Operation CTL_GET_STATUS continuing with warning, status = ORA-16826
DG 2008-10-27-12:29:46 0 2 663690216 Operation CTL_GET_STATUS continuing with warning, status = ORA-16826
In the primary database alert log and physical standby database alert log, there is no error message at the time (2008-10-27-12:29).
when I run:
select * from V$archive_Gap
there is no record selected.
From Oracle suggestion:
ORA-16826: apply service state is inconsistent with the DelayMins property
Cause: This warning was caused by one of the following reasons:
1. Apply service was started without specifying the real time apply option or without the NODELAY option while DelayMins is zero.
2. Apply service was started with the real-time apply option or with the NODELAY option while DelayMins is greater than zero.
Action: Reenable the standby database to allow the broker to restart the apply service with the apply options that are consistent with the specified value of the DelayMins property.
I am not sure how to "Reenable the standby database to allow the broker to restart the apply service with the apply options"
Could you please give some comment?
Thank you very much,

Might be because there is a space in-between the parameter, if you have copy-pasted it directly then there is surely a space after 'STANDBY'; remove the space as the parameter cannot have a space in between.
Also for the 1st issue, create a standby control file on promary database using
ALTER DATABASE CREATE STANDBY CONTROLFILE AS '/app/oracle/ORCL/oradata/stby_control.ctl';
Then copy the above control file to the standby system, make sure you have the control_files parameter pointing to the new control file you have just created and try running the command once again.
hth...
Edited by: vandem on May 29, 2009 9:15 AM

How to install Skype/viber for video calling on ZTE open C firefoxOS mobile

I have problem in installing Skype/viber video calling app on my ZTE open C
Firefox OS mobile every time I try it directs me to google play store which identify only
Android OS

Unfortunately, Skype or Viber is not available for Firefox OS at this moment. There are alternative chat apps that are available in the Marketplace however, I don't think it supports Skype or Viber at this moment.

How to install skype in nokia lumia 900 windows 7....

Hi all,
Can any one suggest how to download and install Skype in Nokia lumia 900 windows 7.8 ?

Hi and welcome to the Skype Community,
You cannot install Skype on Windows Phone 7 devices any longer. See here: https://support.skype.com/en/faq/FA34489/is-skype-for-windows-phone-7-being-discontinued
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

PlayBook "how to install skype"

Hi I baought Playbook before few days & specailly for skype calls but I can't install skype there is "This item not supported by your current device profile" error on skype app page.
can someone tell me please how i can install skype in Playbook.
Thanks

no need for a duplicate post
http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/PlayBook-quot-This-item-not-supported-by-...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Problems and solutions for 9i DB R2 install on Redhat Linux AS 2.1

Installing 9iDB R2 9.2.0.1.0 on Redhat Linux Advanced Server 2.1 (aka Redhat Enterprise Linux (AS))
and applying patchset 2 (9.2.0.3.0)
This is a certified platform but I hit many problems getting the install to work. Here are the problems I hit and how I solved them.
Note: This is not intended to be a install for dummies but just an account of all my problems and how I overcame them. I spent 10 hours on this certified install (mostly looking for solutions to the problems I was having)
I had a Intel Pentium 3 with 512 Meg RAM. (test machine)
1. Install Redhat Linux
2. Install Sun JDK 1.3.1 (this is not actually required for this install. I installed it as I was planning to install 9iAS after this)
3. Install binutils-2.11.90.0.8-13 (also not required. I installed it for 9iAS)
All other components were ok on my Redhat Linux install (i.e. kernel version, glibc)
4. Create oracle user with dba group
5. Create oracle home and oracle base directories. Ensure these are owned by oracle with rwx
6. Set kernel parameters and make sure that they are initialized every startup:
I managed to locate this script in the Redhat document called
"Deploying Oracle9iTM on Red Hat Enterprise Linux AS"
create a file called oracle.sh in /etc and give it execute permissions
oracle.sh
#!/bin/bash
# configures kernel and system parameters for Oracle9i R2
# File handles
echo 65536 > /proc/sys/fs/file-max
ulimit -n 65536
# Shared memory
# The default SHMMAX value is too low and likely to cause a failure during
# database creation. SHMMAX should be equal to half of your system's physical
# RAM.
# The default is for 512 MB of RAM. Replace the default value as appropriate
# for the amount of memory in your system, i.e.,
# 512 MB : 268435456
# 1 GB : 536870912
# 2 GB : 1073741824
# 4 GB : 2147483648
echo 268435456 > /proc/sys/kernel/shmmax
# It is generally safe to leave these next two values as they are
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
# Semaphores
echo 250 32000 100 128 > /proc/sys/kernel/sem
# Sockets
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
# Processes
ulimit -u 16384
----EOF---------
then...
# chmod +x /etc/oracle.sh # make executable
# . /etc/oracle.sh # apply changes now
edit /etc/rc.local to ensure this is run on startup
append to /etc/rc.local
# configure system for Oracle9i R2
bash /etc/oracle.sh
--------EOF--------------------
7. create a generic oracle environment setup script for all users to run
create the file /etc/profile.d/oracleenv.sh
be sure to change the variables to your environment (ORACLE_BASE, ORACLE_HOME and ORACLE_SID)
oracleenv.sh
# Configures the user's environment for Oracle9i R2
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/9.2.0.1.0
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORACLE_SID=orcl
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_BASE ORACLE_HOME ORA_NLS33 ORACLE_SID LD_LIBRARY_PATH PATH
----EOF---------
chmod 755 /etc/profile.d/oraclenv.sh
This file will run when a user logs in.
8. Install oracle DB
This took me quite a few attempts.
The first Install I did I received the error jre was not found. This issue seemed to be relating to the fact I was not installing on a Pentium 4. Oracle was looking for the jre in oracle.swd.jre/bin/i686 (and .../lib/i686) when some of the files were placed in i386 and java was looking in i386. This created a real mess. I had encountered a similar problem on a previous install on a different platform. I found articles of people that tried to just link the directories with symbolic links but this never worked. I tried my own version but also failed.
The solution that worked for me was to de-install, remove all the oracle directories created by the install (this part I had always done) AND also delete the file /etc/oraInstl.loc. This makes the Installer truly believe this is the first time Oracle has been installed on this box. My jre problem disappeared after that. (I don't know why it just didn't work in the first place...)
The next error I received was an ORA-03113 when creating the database (in the dbca). (It was actually at this point that I found the document from redhat as mentioned in my set 6 above) I also noticed that when running the install of the database, the default was for Oracle's SGA to use 70% of the available memory on my machine (I have 512M so that's 360M). Oracle instructed me to set shmmax to around 240M. This may be why the database creation failed as I thought the shmmax parameter needed to be larger that SGA. Anyway, I reduce the SGA to 50% and it worked.
This error may also have been caused by the kernel parameters not being set properly after a reboot so if you implementing stop 6 above. You may never get this problem, hopefully.
8. Install the universal Installer 2.2.0.18.0 (a prerequisite for installing the patchset 2)
You will need this to install the patchset 2. You can get it from metalink by searching for the bug number in the patch area. Search for bug/patch number 2878462 in patches. (37Meg for linux intel)
(Did you know that when oracle refer to a bug number, you should treat this as a patch number? General the bugs are not available for public viewing but oracle create a patch of the same number as a placeholder. So don't search for the bug in the site search or by doc id, go straight to the "patches" area and enter the bug number as a patch number, you'll have more success. - I only found that out today after struggling with metalink for the last 4 years)
9. Install the patchset 2
I downloaded patchset 2 (which will bring my DB version to 9.2.0.3.0) (220Meg). There is a special symbolic link command you'll need so make sure you remember to do this.
i.e.
$ cd $ORACLE_BASE/oui/bin/link
$ ln -s libclntsh.so.9.0 libclntsh.so
10. Migrate your database
I could not get this to work. The docs says I need at least 150M shared_pool_size and 150M Java_pool_size before running the startup migrate. As I only have 512Meg RAM (and shmmax set to 230M) I did hold much hope that this would work. I started my DB without the migrate option just to see if it would actually open with 300M in my pools. It did, so I shut it down and restarted with the migrate option. After 5 minutes of heavy processing (I still have an empty database) my server appeared to hang. I decided to restart the machine and just re-create my DB with the new patchset already applied. I delete my $ORACLE_BASE/oradata/<sid> directory and remove the entry from /etc/oratab and re-created my DB. This worked fine :)
I hope this document helps you for your install. Please drop me line if it does help and I'll endevour to write more documents like this one.
Please drop me a quick line at [email protected] even just to say "thanks".
I will include a few keywords here to help the searches find this document. (mainly the keywords I searched on and failed to find a doc like this one)
ORA-03113 ORA-3113 03113 3113 jre was not found jre not found i686 i386 i586 9iDB R2 9.2.0.1.0 9.2.0.3.0 Redhat Advanced Server 2.1 AS Enterprise Linux (AS) RH install error installation errors oui dbca problem issue
Good luck,
Tim Daniell.

The trick that worked for me was on a 2nd attempt. I installed once, let it fail with "jre was not found", de-install through the installer, delete all directories and files under $ORACLE_BASE (including $ORACLE_HOME), and also delete /etc/oraInst.loc.
I don't know why it fixes itself with this. Oracle say this is an unresolved bug 2726268 that lies in the installer. This is still unresolved by Oracle (as at 02-June-03) therefore it is not a published bug/patch. If this doesn't work, I suggest you open an iTAR and see if Oracle has any more suggestions for you.
Cheers,
Tim.

I would like to know which postal code am I supposed to enter,while installing Skype,I'm unable to do it,as it's repeatedly asking for postalcode.

I would like to know,while installing Skype in ipad2, what is the postalcode tobe entered?

Where is this request for a "postal code" appearing? When you are attempting to set up an iTunes Store account to then download the Skype app? Or when trying to set up the app after it's already been downloaded?

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

How to control change request creation for particular IBase Component?

Dear Experts,
Can anybody suggest , how to control change request creation for particular IBase Component?
We have implemented ChaRM which is integrated with SAP ECC & SAP BI.
ChaRM is not integrated with SAP Solution Manager.
End Users are creating support notifications from -Help Menu- Create Support Notification.
The IBase Component is not editable once notification is created. This Ibase is copied to change request when the action-create change document is saved.
Requirement is that, during creation of change document, system should check the IBase component of support notification. If the IBase is related to solution manager system, system should restirct the change request creation.
Kindly suggest how to achieve this.
Regards
Vivek

Hello Vivek,
The way to do what you want is to create a schedule condition for action Create Change Document. The action has to be displayed only when the IBase/Component value differs from SolMan. To add the IBase/Component value to the container so that it can be evaluated during runtime, you will have to create a subtype of BUS2000116 on which condition can be buit.
See the following posts for more information :
Hope this helps,
BR.
Stéphane.

Solution for SKYPE ALWAYS ONLINE

incognitoSkype wrote:
It's a bug like everything that is part of Microsoft.
The solution is: Unlink your Skype account and your Microsoft account
My problem came when I logged from Skype for Windows 8. I was asked do I want to link my accounts without knowing the consequences. After I saw that terrible thing called Skype for Windows 8 I searched the Net for desktop version. But what I found is that I appear always online. After chat with the Skype support I got nothing. So I found in Skype Community that unlinking the Skype and Microsoft accounts worked. I tried it and it worked for me too. Unless Microsoft fix that problem unlinking is the only way.
How do I unlink my Skype and Microsoft or Facebook accounts?
dreamhouse wrote:
This is the right answer. The problem started happening yesterday when I linked the two accounts and now it is resolved after unlinking them again. Shame on you Microsoft!
For you guys who are not managing to get a result from this solution it probably is because you did not go to your config page (see above in the quoted message) to find out if your accounts were linked or not!

@architgrover, the way that it should work is when you run /remotelogout on your PC (or Mac, AFAIK), all other clients will be logged out of MS's cloud, which is what shows people as fake-online.
Are you sure that doing that and then running /showplaces still shows the Android client as live? It really shouldn't. Likewise, using the formal Logoff menu (lower left in the Skype Android client) should have the same effect. Simply turning off your phone or going into Airplane Mode does not, which is a major design flaw but something we'll have to continue to live with.

How to install Skype on iPhone

I just bought a new iPhone. I want to install Skype. I selected "App Store" and signed into my iTunes account. I search for the Skyp applications and selected "Install". My question is how do I start Skype? I was expecting the Skype icon to appear on the iPhone display but it did not. Do I have to somehow do this manually? When I go back to the "App Store" it says that Skype is installed. I'm probably the only one in the world who doesn't know how to do this.

It's probably put the icon on the screen to the right of where you're looking. Swipe to the left to see the next screen.
In case you missed the link printed on the leaflet in the box, you may find this useful:
http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf

Requesting solution for how install Skype to ipho...

Similar Messages

Maybe you are looking for