Requeueing Messages for Delivery

Had a problem with our 4.15 messaging server and had to clear the queue - stored the messages and deleted the control env files. Placing the message files back in the messages folder does not automatically pick up the messages. There does not appear to be any corrupt messages, but smtpd is not picking them up. How do I requeue these messages for delivery?

Glenn, I really want to get to the bottom of this, so I appriciate any and all ideas. The buddy in question actually removed all references to themselves in Google+. After closing and reopening Messages I was finally able to iMessage that user instead of Google Talk them.
I shouldn't have to go through such lengths to iMessage someone? Right?
So today I go to iMessage that buddy and it is coming up with Google Talk again.. I'm trying to setup a group iMessage list and can't include this user since the only user I see for the buddy in question is the Google Talk one.
So the buddy in question does have iMessage enabled and configured on their devices. As do I. We both can see chats via the already initiated session on all our devices. I just can't start a new group chat with him because all I see is Google Talk.
How do I get around this?

Similar Messages

Automatic assignment of output message for delivery schedules changes

Hi,
we have defined an output type ZDSS for scheduling agreement release. For perticular Delivery schedule documents we are getting the below error.
Diagnosis
An unprocessed output exists (output type ZDSS) has been deactivated.
System Response
Output type ZDSS will no longer be determined.
It seems some user has set the unprocessed outpout type ZDSS of this document to deactive (permanent) status. I need to reactivate the auto assignment of output type for these documents.
Can someone let me know as to how can i reactivate this unprocessed output type OR delete this output type entry from the document?
Please suggest.
Regards,
Prashant

Hi,
Problem is solved on my own... Closing the message.
Regards,

Message No delivery type defined for supplying plant BP01 and document type

Hi all,
I am trying to create a purchase order with a BP01 supplier and the BP02 division but I get the following error message No delivery type defined for supplying plant BP01 and document type.
When I create a PO with a BP02 supplier and the BP01 I do not get any message.
How can I fix it ?
Thanks
Regards
Pierre

1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...

Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples.
I was wondering, what's going on here. When checking queues using Get-Queue cmdlet it doesn't show more than couple of messages in the queue.
How do I get this fixed? This seems to be a known issue from thread http://social.technet.microsoft.com/Forums/en-US/ac121f02-4359-4d18-b86a-9c9c78b320a9/perfmon-messages-queued-for-delivery-2147483764?forum=exchange2010
Any assistance would be greatly appreciated.

Hi ChaituNanl,
Thank you for your question.
By our search, I suggest we update Exchange to Exchange 2010 CU6 or later, because problem also seem to appear to Exchange CU5 or former.
We could download the CU by the following link:
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
Notice: please note the version of Exchange Service Pack
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

NotificationServiceFault - Message accepted for delivery

This is a bit of a strange one ...
I have one BPEL process set up for exception handling and error notification via email and it is working fine. I then went to another "like" type process and setup the same thing. The notification throws a fault but the message is "Message accepted for delivery" ... but the message does not arrive ... this seems odd .. Has anyone else ever had this problem with the notification system.
InvokeNotificationService (faulted)
[2006/06/05 12:41:52] "{http://xmlns.oracle.com/ias/pcbpel/NotificationService}NotificationServiceFault" has been thrown. less
<NotificationServiceFault>
<part name="faultInfo" >
<faultInfo>250 2.0.0 k551tgn15962 Message accepted for delivery </faultInfo>
</part>
</NotificationServiceFault>

We have had intermittent issues with invoking the notification service, I have not looked further on the server (appserver 10.1.2.0.2 on Solaris) where the e-mail is sent to try and track down the issue. Instead we put a loop around the invoke notification and retry for a configurable number of times incase a fault is thrown (not ideal and adds to the overall code needed). It seems after the fault is thrown the next time it will invoke with no troubles.

Seeking definition of "Message accepted for delivery"

In Exchange 2010 I have a situation where if I send a message to both internal and external recipients, the external recipients only receive the message if I turn Sophos PureMessage off. However, in both
successful attempts and failed attempts the last record in my Exchange Message Tracking Logs is identical, as follows:
EVENTID = SEND
SOURCE = SMTP
SOURCECONTEXT = "...Message accepted for delivery"
That leads to my wondering what exactly that log entry means?
For example, it could mean "Sending server will attempt to deliver message"
or it could mean "Sending server has attempted to deliver message"
or it could mean "Receiving server has accepted message"
or it could means something else. If you know *for sure*, can you please reply? Please don't guess what it means. Also, if you respond, please don't use the word "server" in your response without explicitly stating which server
you mean (eg "sending server" or "receiving server").
If it turns out that log record does NOT indicate the receiving server accepted the message, can anyone tell me how I can be sure the receiving server has accepted the message?
Thank you very much!

If it turns out that log record does NOT indicate the receiving server accepted the message, can anyone tell me how I can be sure the receiving server has accepted the message?
Hi,
You can try to enable the NDR. If the recipient's mailbox doesn't receive this email, it will return NDR to the sender.
Also try to configure Get delivery and read receipt confirmations. More details to see:
https://support.office.microsoft.com/en-us/article/Get-delivery-and-read-receipt-confirmations-a34bf70a-4c2c-4461-b2a1-12e4a7a92141?CorrelationId=f2166a89-93d0-4137-8268-601b7aa337cc&ui=en-US&rs=en-US&ad=US
Thanks
Mavis Huang
TechNet Community Support

Mail delivery failure messages for email I have not sent to contacts I do not know.

I am receiving Mail delivery failure messages for emails I have not sent; they are addressed to contacts I've never heard of, many different. Apparently, this is some kind of spam but I don't know what to do about it.

There is nothing you can do about it. It will stop at some point.
http://en.wikipedia.org/wiki/Backscatter_%28email%29

PerfMon - Messages Queued for Delivery = 2,147,483,764

Environment - Exchange 2010, DAG 2 X Server 2008 R2.
Hi there, we have noticed that a monitor is reporting there are 2,147,483,764 messages queued for delivery when running this powershell command: get-wmiobject -query "select MessagesQueuedForDelivery from Win32_PerfFormattedData_MSExchangeTransportQueues_MSExchangeTransportQueues"
The value returned by this also matches what we see in the PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery. the number does not increment as messages are sent, in fact it's only showing 2 more today than it was yesterday.
We are wondering just whats going on here, when checking queues in the GUI there are only a couple of messages showing up.
Is this counter just broken? If so how could we fix it?
Thanks for any assistance, regards Peter.

Hi,
According to your description, it seems that the value is the total number of messages that were queued for delivery since server started.
I recommend you refer to the following article:
http://pic.dhe.ibm.com/infocenter/tivihelp/v30r1/index.jsp?topic=%2Fcom.ibm.itmmc.doc%2Fmain_xc85.htm
Messages Queued For Delivery
The number of messages queued to be delivered when sample was taken. The value
format is a 4-byte integer.
Messages Queued For Delivery/sec The rate messages are queued for delivery since the server
was started per second. The value format is a decimal.
Messages Queued For Delivery Total
The total number of messages that were queued for delivery since
server started. The value format is a 4-byte integer.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Error Message for Excise Invoice for delivery in J1IJ

Hello there,
While doing Excise Invoice posting in J1IJ for delivery, I get below error
"Quantity is more than that available in the excise invoice"
The selected mother excise invoice available qty is 0.003 CTN, but I want to post invoice for 0.167 CTN.
Please suggest at earliest.
Thank you!

Does the Depot have sufficient stock?
As per your post, it seems there is stock deficient ?
Regards,
Reazuddin MD

Email not getting send: Error message 'No delivery to external email id

Hi All,
Whenever i am trying to send mail to external address from Business Workplace (Tcode: SBWP), it initially sets the status of the mail as waiting with message 'Will be sent after server date:server time'. But after 6 hours, its status changes to error with message 'No delivery to <external email id>.
When i checked in error log (in SOST), it displays the following messages:
1. Document sent
2. Wait for Communications service
3. No delivery to <external email id> (after 6 hours from Document sent/Wait for communications service time)
Please suggest me how to resolve this issue.
Thanks in advance.
Regards,
Shradhanjali Mishra

Hi Shane,
Extremely sorry for the late reply.
I asked the BASIS team to fix the issue.. and i think they did some configuration as a result of which i am not getting any error msg now while sending email.
I guess you also need to check with your BASIS team to fix this issue.
Regards,
Shradhanjali

Report for delivery costs

Hi,
1.
I need to have a report for the paid delivey costs(planned and unplanned) for the given pos.
2.
Is there any std transaction which can give the list of fast moving items based on movement types?
Please help me, it is very urgent.
Your help is appreciated.
Regards,
Subbu.

Hi,
For Delivery Cost look in Table EKBZ ,EKBZH.For Fast moving item use the T Code MCBE (also MCBA,MCBC)in which you can find the fields like number of valuated stock receipts and issue and also number of movements .Selecting a given period range if the number of movemnets is sorted in descending order the maximum moved material can be found.
Dhruba
Message was edited by:
Dhruba Charan Behera

Bursting Control file, Error!! Could not deliver the output for Delivery

Hi,
I am using bursting control file to send report output to email in R12.1.3.
If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
"Error!! Could not deliver the output for Delivery channel:null "
In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
"Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
my requirement is if there is no data, still i require the output to email.
Thanks in Advance
Adina.

Hi,
I am facing the same situation and want the bursting program to finish in normal even when there is no data.
Can you please let me know how you resolved this?
Thanks
RG

Creating excise invoice for delivery at depot

Hi SAP Guru,
i am facing an error while creating excise invoice for delivery at depot. The error is You are not authorized to create
Message no. 8I465 Trans Code J1IJ
I had transfer the stock by ME27
Delivery by VL10G And VL02n
Proforma invoce VF01
Excise invoice J1IIN
Excise invoice at DEpot by J1IG
still i am facing the problem in creating excise invoice for delivery at depot by J1IJ
Pl Guide me where i am wrong
Regards
Hemu

Hii..
Contact your basis buys it seems that you are having authorization problem.
Regards,
Aakash Kehralia

Could not deliver the output for Delivery channel:null

XML Publisher Report Bursting Program is throwing the following exception
Log file
========
XML/BI Publisher Version : 5.6.3
Request ID: 11900899
All Parameters: Dummy for Data Security=Y:ReportRequestID=11900819:DebugFlag=Y
Report Req ID: 11900819
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:DB94
Preparing parameters
null output =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900899.out
inputfilename =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Data XML File:/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Set Bursting parameters..
Temp. Directory:/caop/app02/common/caopcomn/temp
[071713_110919401][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.1.0 - Production
[071713_110919410][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=11900819, user-variable:cp:language=en, user-variable:cp:responsibility=21540, user-variable.OA_MEDIA=http://db172.coresys.com:17204/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=11900819, user-variable:cp:locale=en-US, user-variable:cp:user=PRAYAPUDI, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=11900899, user-variable:cp:org_id=0, user-variable:cp:reportdescription=Care One Salary Change Approval, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Output File
========
<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>11901286</REQUESTID>
<PARENT_REQUESTID>11901285</PARENT_REQUESTID>
<REPORT_DESC>Care One Salary Change Approval</REPORT_DESC>
<OUTPUT_FILE>/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11901286.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>EXCEL</OUTPUT_TYPE>
<DELIVERY>email</DELIVERY>
<OUTPUT>/caop/app02/common/caopcomn/temp/071713_120851408/xdo1_2.xls</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details..</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
XML File
======
<?xml version="1.0" encoding="ISO-8859-1"?>

<CAO_SAL_CHG_APR>
<LIST_G_EMAIL>
    <G_EMAIL>
      <EMAIL>[email protected]</EMAIL>
      <LIST_G_MESSAGE_NUMBER>
<G_MESSAGE_NUMBER>
          <MESSAGE_NUMBER>1</MESSAGE_NUMBER>
          <PERCENT_CHANGE>-98.75</PERCENT_CHANGE>
          <SALARY_CHANGE_AMT>-23,621.00</SALARY_CHANGE_AMT>
          <DATE_CHANGE_MADE>07/16/2013</DATE_CHANGE_MADE>
          <APPROVER_NAME>Veluz, Cynthia Avila</APPROVER_NAME>
          <APPROVER_JOB>Administration|Center|Payroll/Benefits Coordinator</APPROVER_JOB>
          <PERSON_NAME>Donet, Andrew P</PERSON_NAME>
          <PERSON_NUM>131996</PERSON_NUM>
          <LOCATION_CODE>HR - CareOne at Morris ALF</LOCATION_CODE>
          <REGION_2>NJ</REGION_2>
          <JOB_TITLE>Administration|Center|Director of Admissions</JOB_TITLE>
          <CURRENT_ANNUAL_SAL>299.00</CURRENT_ANNUAL_SAL>
          <PREVIOUS_ANNUAL_SAL>23,920.00</PREVIOUS_ANNUAL_SAL>
          <PAY_BASIS>PERIOD</PAY_BASIS>
          <CUR_PAY>11.50</CUR_PAY>
          <CHANGE_DATE>07/21/2013</CHANGE_DATE>
          <SALARY_CHANGE_REASON></SALARY_CHANGE_REASON>
          <EMPLOYMENT_CATEGORY>Fulltime-Regular</EMPLOYMENT_CATEGORY>
          <ERIC_WILLIAMS>[email protected]</ERIC_WILLIAMS>
        </G_MESSAGE_NUMBER>
      </LIST_G_MESSAGE_NUMBER>
    </G_EMAIL>
</LIST_G_EMAIL>
</CAO_SAL_CHG_APR>
Control File
========
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="CAO_SAL_CHG_APR/LIST_G_EMAIL/G_EMAIL">
<xapi:delivery>
<xapi:email server="smtp.coresys.com" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]"
attachment="true"
subject="Salaries Changed Yesterday">
Please do not reply to this email, it is system-generated.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Care_One_Salary_Change_Approval" output-type="EXCEL"   delivery="123">
<xapi:template type="rtf" location="xdo://CAO.CAO_SAL_CHG_APR.en.US/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
It is greatly apprecaited, if you can take a look the issue.
Thank you,
-Pradeep.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Error while creating a TO for Delivery

Hi Experts ,
Can any one advise me what can be the possible solution for this kind of internal Error.
An internal error has occurred (L03T 0152 H )
Message no. L3705
Diagnosis
No screen sequence control is defined for the argument enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
Your comments and advise will be appreciated.
Regards
Albert

Hi,
Please search for SAP Notes with tge message number as the search criteria and pick the one relevant for your scenario.
There are a couple of notes relevant for delivery.

Requeueing Messages for Delivery

Similar Messages

Maybe you are looking for