Require A Password When Viewing A Livestream - Media Server 5

I am testing out Adobe Media Server Starter 5, and creating a livestream using Flash Media Live Encoder 3.2. I believe I have everything working right now, by embeding the video in a webpage and I can see the livestream just fine.
What I would like is to know how to require a password to VIEW the livestream.
ex: I setup a livestream I only want 3 clients to be able to view. When they bring up the webpage they cannot view the video until they enter a username or password.
Embeding the video in a webpage is not required (I am happy to use another method if required to achieve the authentication option).

Ask in the AMS/ FMS forums. Could be that this is not part of the starter editions since they only have limited security features.
Mylenium

Similar Messages

Airport Failing to require Administrator Password when Turning on/off?

I was using Lion a ways back but became nervous about its security when I discovered it was failing to require Administrator Password for this simple setting.
See 'System Settings-->Network-->Airport-->Advanded.' On the Airport tab, towards the bottom there is a section that states "Require Administrator Password to:" with a checkbox at the bottom for "Turn Airport on or off."
This setting fails to do anything.
Has anyone else experienced this? Is it still a problem?
I took my MBP into the Apple Store in Georgetown, Washington DC and a few guys at the store were able to verify this problem both on my MBP and on one store model.... I would like to try Lion again but I'm wondering if it is still a problem?

Crazy isn't it!?
An 8MHz Atari can display many motion Screen Savers with almost no CPU!?
It's a bit like calling today's Monitors Wide Screens as a selling point, when they're actually Short Screens! I haven't found a single web page that didn't need more Vertical!?
I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
After a bit, it generally speeds everything up.

Why would the finder require my password when I trash a file?

Every time I attempt to drag a file or folder (or use the keyboard shortcut) to the trash I receive the notification 'the finder is trying to make changes' and asked for my password.
Once I enter the password the file or folder disappears and the empty trash sound is played. The trash itself remains empty.
I've repaired disk permissions in the hope it would fix the problem but it doesn't.
Why is this happening and how can I make it stop?
Any help would be appreciated.
Thanks,
Paul.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Error when viewing documents from content server

hi all,
I have a question.
we have installed an SAP Content Server on Windows 2003 server, and have connected it to our SAP ECC 5.00 ERP. The purpose is so that documents that are attached to a transaction (through Generic Objects Services - Create Attachment), get stored onto the content server rather than the SAP database. We have done all the necessary configuration in oac0, oact, and SKPR08. We are able to attach a document to the transaction, and it gets stored onto the content server. Our issue is when viewing the attachment.
This is the error we are getting as soon as we try to view the attachment:
"Windows cannot find c:\documents and settings\<username>\SAPWorkDir\<filename>. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
After pressing OK to the message, the system then gives this error:
"File could not be exported
Message no. SO315
Diagnosis
You have selected either the Export function or a PC document to be exported from the system. The file could not be exported to the
PC. Possible reasons:
1. The file is already open and is being used by an application.
2. The directory to which the file is to be exported is write-protected.
Procedure
In the first case, close the application.
In the second case, remove the write-protection attribute from the directory or enter another directory."
Why is the system trying to open the file from the user's C:\ drive?
Does anyone have a solution to this error?
Cheers,

Hi Aleem,
Refer to below KB & note, this should help you.
1849203 - Error message Database error for <GET DATA FROM KPRO> (SO013) and/or File could not be exported (SO315) when opening a document in Attachment list
764972 - Errors when creating workflow attachment
Regards,
Ravi

When is the WRT610n media server going to support mkv files?????

I bought the WRT610n because it had the twonkyvision media server bundled, which I have been using for years to stream from computers to my Dlink media players. They just updated the firmware a few weeks ago but did not update the media server to a version that supports mkv files. Why?

Probably because mkv is not 'mainstream' enough to warrant providing support.
if you need it there is an mkv to avi converter here
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

PackageMaker: requiring admin password when it should not

I've been seeing a really strange "anomoly" with a package I've created.
None of the files in the package are configured to require the Admin password and the install
destination is specified to be the user home directory. However, with the *same* .pkg file, I
see three different installations:
1) Everything goes along with minimal interaction and everything is installed where it
should be.
2) Almost the same, except the user is presented a window asking where to install the
package: the user directory or some other location.
3) With either of the two above, there may be a popup requesting the admin password. But
even with the correct password, the package files are not installed; even though the install
is declared successful. (I haven't been able to figure out where it thinks the files are going.)
So there are really two questions. First, why is the user ever queried about the destination
of the package files when the package is configured to use the home directory. Second,
why is the user promoted for the admin password.
As I said, this is with the same package file. Double clicking it will present one of the
scenarios above.
This certainly makes for a poor installation experience. I'm wondering it there is something
I've done (ore haven't done) which would cause these to happen.
Suggestions or comments welcome.
Oh yes, it makes no difference whether I use the PackageMaker GUI or the command line
interface.
- Mark

try double clicking a song with a !
in the resulting pop up hit locate
browse to the location of the song and select it
in the next pop up tell it yes to use the location of that song to find other items

How do I require a password when the computer boots up (from shutdown)?

Hey guys,
How do I require the input of a password for my user account when my computer is off and then is booted up?
Thanks

Open System Preferences
Click on Accounts
Click on the padlock and enter password
Click on login options
There you should see an option to disable "automatic login". You should also notice some other options there that you may or may not want. They should be pretty self explanatory.
The Security panel has an option to require password after sleep or the screen saver is invoked if you need it.
-KeithP

How can I set my iphone to prompt for a password when viewing a selected email account?

I can see a lot of people complaining about adhoc password entry when using email but nothing where people actually want to be prompted for a password. If I have multiple email accounts and a phone where others can pick up and enter the top level security 4 digit number, I would like one of the email accounts to be slightly more secure than the others, hence need it to prompt for a password. Does anybody have any ideas how I can do this?

Sorry, there is no way to do this in the current iOS. Suggest such to Apple here:
http://www.apple.com/feedback/iphone.html

HMC150 Footage ok in PProCS4, but grey when viewing via Win Media Player

I just purchased an HMC150 and really like it and I am recording in 1080P 24 and pulling it into a 1080P/24 timeline. I can edit and view the media no problem in Premiere with full color, but if I play the original raw AVCHD original files through Windows Media Player the video is Grey and if I export them from PPro to MPeg2 they are also grey...anybody have any ideas why this would be or how to correct it?

Good question, sorry I should have included all of that information.
I am running on an HPZ800 dual quad core with 36GB of RAM using PPRo CS4 (latest version) on Windows 64 bit. I am not exactly sure which codec is going to be used in this case because I believe that there are 3 possible ones that could be used. It appears that PPro is using it's own AVCHD codec which is probably why it works fine. Windows 7 natively recognizes AVCHD, but I have two utilities installed on my system to download content from my cameras that may have also installed Codec's. The first is one from Canon that comes with their camera's (in this case the HV30, that downloads AVCHD also), and the 2nd is the AVCCam application that comes with the Panasonic HMC150 to download content from that camera. The AVCHD files from my Canon play just fine through Windows Media Player or Premiere Pro, but the HMC150 files only play in full color in Premiere Pro, not through Windows Media Player. I agree it might be codec related, but not exactly sure the best way to track down the problem. Thanks in advance for the help.

CMC tool raise http 404 error when viewing user security on server object.

Description of Problem or Question:
In investigating an issue promoting an LCM job, I attempted to use the CMC tool to look at the user security on a server object. When I executed the command the tool raised an error.
HTTP Status 404 - /CmcAppActions/jsp/Shared_Rights/rights.face.
type: Status Report
message: /CmcAppActions/jsp/Shared_rights/rights.face
description: The requested resource (/CmcAppActions/jsp/Shared_Rights/rights.face) is not available.
Product\Version\Service Pack\Fixpack (if applicable):
Business Objects XI 3.1 SP2
Apache Tomcat 5.5.20
Java 6.0.170
Relevant Environment Information (OS & version, java or .net & version, DB & version):
WIN Server 2003 Enterprise SP2
Sporadic or Consistent (if applicable):
Consistent error
What has already been tried (where have you searched for a solution to your question/problem):
I have done some research in service.sap.com and on the Web, but have found nothing concrete other than it appears to be an error in the install of the Tomcat server.
Edited by: Jon Russell on Jul 9, 2010 12:20 AM

Hi Alvaro,
Forgot this thread was open as of yet. There was a solutio but nothing concrete I can offer to th user community. The reason i that this devolved into a Note to SAP and, as I recall, the solution was for a BO consultant to remotely access our development server for BO an bsically do "brain surgery" in the SQL Server db we had supporting BO. It was a difficult issue an eventually required direct intervention from SAP-BO.

Can iBook require password when lid is opened?

I can get it to ask for a password at startup and if I manually log out (from Accounts control panel), but I can't seem to figure out how to require a password when it wakes from sleep. Is there a way to do this?
Thanks,
Heidi

Thank you! That's exactly what I was looking for
Heidi

How does the backup file that I would like to use for restore now require a password

How does the backup file that I would like to use for restore now require a password, when I just Backed it up on 10/30/14

It requires a password to restore from it because at some point, you checked the box in iTunes to use encrypted backups, at which point you were prompted for, and set a password.
If you now can't remember what that was, then you can not restore from that backup.

Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!

Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
Is this a known issue and is there any solution for this?

Wow that is a new one, great find!
I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread. But too late, it's on the way back to Sony to get rolled back to Gingerbread.
Too many other problems with ICS that have crippled my device.
1) Wi-Fi Hotspot does not work anymore
2) USB tethering does not work anymore
3) LED notification issues for incoming SMS
4) Dialer slow to load
5) HD Video recording skip frames and jitter.
6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
If you have not done so take a look at the above features and see what you turn up.
~Cheers~
Bob H
Minneapolis, MN
USA
ST18a Ray

610N Media Server Issue

Does anyone have an issue when you enable the Media Server feature on this router? My router seems to hang after a while.

Check if the firmware on the router is the latest one.

Adobe Media Server DVR only 5 second recording

I have a strange problem. I have an application built in Flash Builder.
When I record to Flash Media Server I don't have any issues, it'll do DVR for as long as I want. But when I record to Adobe Media Server, the recording is only 5 seconds long.
ns = new NetStream(nc);
ns.client = new Object();
userUID = UIDUtil.createUID();
ns.attachAudio (mic);
ns.attachCamera (camera);
ns.publish( "demo" + userUID, "record" );
Later I can play the recording, timestamp says that it's a 5 second archive, but it'll really keep playing the recorded video.
Same code, just different server.
Has anyone had this problem when migrating to Adobe Media Server from Flash Media Server? Using Amazon.

I'm having this issue as well. Did you ever find a solution to it?

Require A Password When Viewing A Livestream - Media Server 5

Similar Messages

Maybe you are looking for