Require at least one checkbox?

I have a form which dynamically spits out my users so they
can be assigned to a project. How can I require at least one of the
checkboxes that it spits out or is their a better method to my
madness?

quote:
Originally posted by:
mikeap
I have a form which dynamically spits out my users so they
can be assigned to a project. How can I require at least one of the
checkboxes that it spits out or is their a better method to my
madness?
Instead of check boxes use radio buttons or a select.

Similar Messages

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

Build - Generates an "NTSC DVD requires at least one AC3 or PCM Audio track"

I'm using the trial version to make my first DVD with Encore. All went fairly smoothly until I went to "build" the DVD and received the "NTSC DVD requires at least one AC3 or PCM Audio track..." message. I continued with the build and tested the DVD. All the audio was fine except for audio assigned to my menus via the audio section, assigned from the motion tab, was not heard on the DVD. The Menu audio did however sound good from the preview mode. The audio that I tried to use in the motion audio field, was from a M2P file from the same clip that worked fine on the DVD. The video field was not set to anything on the motion menu.
My questions are: 1) How do I clear the error? 2) How do I get the Audio on my menus?
(Not sure if this item belonged in the forum, the error forum, or the audio forum - Sorry).
I don't even know for a fact that the error message was tied directly to the menu. I'm sure its something basic that I just missed - Thanks.
Eric

Thanks you very much, now I will be able to sleep tonight. My editing system (Edius) had both the ability to export my sound track to PCM AIFF & PCM WAVE, which worked great for the sound on the menus, as well as an elementary stream (M2V) format which worked good for the main sound track. I looked in the Audio Forum to find out about the elementary streams. The end result is that my DVD build error cleared as well as getting audio on the menu.
Once again, thank you both for your help.

DNS error - "requires at least one Nameserver"

Hi,
I have a working Snow Leopard 10.6.8 server - working in all respects except DNS.
I decided to take the advice of posters on this site and turn off dns and re-enter it from scratch.
I was able to delete all of the settings on the Zones tab, EXCEPT for the primary zone.
When I delete it it just re-appears by itself !
I then try to enter the data that is correct for the name server by clicking the + button under Nameservers.
When I enter the correct data and click OK, it says "Some configuration data is invalid: The zone..... requires at least one Nameserver" !
Well... I'm trying to enter exactly that!
Anyone have any clues how to fix this?

I saw similar behavior recently on one server I was working on. (This was with the 10.6.7 and associated server tools; haven't been down this path with 10.6.8 and the updated server tools.)
If what I saw is similar to what you're seeing here, then try this...
First, if you don't have a recent backup copy of your boot disk that you trust and are willing to use, then back up your boot disk before you proceed by booting a distribution disk and using Disk Utility to make a full copy of your boot disk to external storage. This backup is your path back to operations if Badness Happens.
Once you have rebooted your system from your backup, stop DNS services and exit Server Admin, if either or both are running.
Then launch Terminal.app, and navigate into and delete or rename the Server Admin properties list file:
~/Library/Preferences/com.apple.ServerAdmin.plist
Then relaunch Server Admin, and you should be able to fix your DNS services.
This is your local copy of the preferences file for Server Admin, not a system-wide preferences.
The "immutable" DNS settings were (after digging around) being recovered from the plist file. (I've also had rare occasion to edit that plist file, when things go Really Wonky, and to change the immutable settings to some other temporary domain name, which then let me Get On With It All with the intended domain name.)

Report framework requires at least one grouped column

A Report requires at least one grouped column, otherwise finish button will lead to "The report doesn't contain grouped columns".
Is it possible to configure a report not to require grouping?

Oliver-2012 wrote:
I created a new report (Page Activity Report) from the Tools/Reports console. I added two columns (Page and Type) and tried to click on "Finish" -> error as described.
Then I created my own report (copied from libs/cq/reporting/components/auditreport) with custom columns (Path, Title, and some more). The report displays the columns, but click on finish results in the same error, too.
Is there any special property I have to set in the configurations/Nodes of the report?
I'm beginning to suspect you're not talking about ColdFusion reports, right?
This sub-forum is about creating reports for ColdFusion.
If you are indeed creating a report for ColdFusion, but you're using a third-party report writer, please identify the report writer so that people who have experience with it will be able to help you.
Sorry for the confusion.

Does recording audio require at least one video track?

I needed to record audio while shooting a video and didn't have my handy Zoom with me. I thought to instead set up Premiere to capture the audio.
I created a new, blank project, added a mono audio track, plugged a mic into my audio interface, enabled the mono track for recording in the audio track mixer, chose the input channel, clicked the record button, saw the meters bouncing - all well, right?
Well when I hit "play" - nothing. That is, not until I dragged some black video into the timeline. Then - it worked.
This is not how the workflow is documented in Adobe's "Help and Tutorials" manual.
It should be updated at some point - or this is a bug.

hey tom
this can be done with or without scripts.
you say that you have a menu alreay with the different audio options, correct?
if you do, you would lay all your audio tracks onto its appropriate stream (A1, A2, A3).
then you go to your menu and set up the menu like you would any (create the menu name, drag a selector box to correspond to the highlighted button, etc.)
one this is accomplished, click on the button associated with audio track 1 (A1) and look at your inspector. click on the advance tab and you will see options for setting the streams angles, audio (this is the one you want) and subtitle. click on the dropdown box, and select A1.
then click on the on the menu button associated with A2 and look at your inspector again under the advance tab and you will see it reset itself, now again click on the doprdown menu and now associate that stream with A2.
do the same for the A3.
once you are done, verify the setting with clicking on the first menu button associated with A1 and you will see under the inspectors advance button that Audio stream 1 will be saved. your golden form there!
scripting the bad boy is a little more involved. there is an an article out there that goes through it with great detail.. do a forum search for "scripting audio stream" and you will find it.
goodluck
Mikey

At least one amount is required in document rows

Hi all
I have written some code for JE transfer from a set of databases to one database with all valid accounts, customers etc existing in all. for a particular credit memo's JE, it gives me "At least one amount is required in document rows " error. the strange thing is, even if it gives this error message, the JE is created! I have thrown SDK's execpetion message and it returns this. from the error message, it sounds like either of the debit or credit amount is not given but that is simply not happening.
any idea?
thanks,
Binita

Hi,
Check whether any row level account is getting transfered with null or zero value in JE.
For more response i suggest you to post this thread in SDK Forum

At least one required field was empty on export. Please fill in the required fields (highlighted)

"At least one required field was empty on export. Please fill in the required fields (highlighted)"
I'm tearing my hair out with this one. Have checked all the fields to confirm if I had set the Type as User Entered - Required. Can't find any such field. Any help would be appreciated. Is there an email id where I can send the form?

Hi,
In your script when you make an object visible, you also make it mandatory. No problem there!
However the script that hides the object goes through this sequence:
hide the object, THEN
make it optional/not mandatory.
This is where the problem lies.
You FIRST need to make the object optional/not mandatory AND THEN hide the object. It should just be a simple case of work through the various scripts and having the mandatory line before the presence line.
There is an example here: http://assure.ly/hxHupW.
Hope that helps,
Niall

Exception : DI Error: (-5002) At least one amount is required in document rows

Trying to create a MaterialRevaulation object. doesn't matter what I am using I can getting this error message "Exception : DI Error: (-5002) At least one amount is required in document rows"
Formate of payload looks like
<Payload Role="X" id="atom1">
- <MaterialRevaluation xmlns="">
- <row>
<RevalType>P</RevalType>
<DocDate>20140701</DocDate>
<JournalMemo>Inventory Revaluation</JournalMemo>
<InflationRevaluation>tNO</InflationRevaluation>
</row>
</MaterialRevaluation>
- <MaterialRevulation_Lines xmlns="">
- <row>
<LineNum>0</LineNum>
<ItemCode>Item1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.973030</Price>
</row>
- <row>
<LineNum>1</LineNum>
<ItemCode>Item2</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>15.973030</Price>
</row>
- <row>
<LineNum>2</LineNum>
<ItemCode>Item3</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>13.973030</Price>
</row>
</MaterialRevulation_Lines>
</Payload>
And my SBO object call looks like this
<Payload Role="C" id="atom2" system="0010000102" status="success" b1login="Technical User" method="Synchronous Insert with fallback to Update" objectid="162" payload="atom1" keyname="" keyvalue="" DIresult="failure" DImsg="Exception : DI Error: (-5002) At least one amount is required in document rows" />
I don't think I need to put anything in KeyName or Keyvalue. Since I am insert.
But it looks like it is not even look at the XML changes. I have tried to with no change
1. Add BOM/BO admin structure
2. Rouding price difference (from 0 decimla ot 6)
3. Put in Quantity
4. Add LineNum
5.Change Item
6.Change WHS
Running out of ideas!! Any help will be appreciated. Thank You!

Successful format looks like this
Strange enough, and I still don't know why. Certain item in combination give me the error message. If I break it out to individual document. Then it give me the proper error message. But if it bundled with number of item together then it become this at least one amount is needed at document row error message.
<BOM xmlns="">
<BO>
<AdmInfo>
<Object>162</Object>
<Version>2</Version>
</AdmInfo>
<MaterialRevaluation>
<row>
<DocDate>20140702</DocDate>
<RevalType>P</RevalType>
</row>
</MaterialRevaluation>
<MaterialRevaluation_lines>
<row>
<ItemCode>ITEM1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.587</Price>
</row>
</MaterialRevaluation_lines>
</BO>
</BOM>

At least one number and one English letter are required in the password.

At least one number and one English letter are required in the password.

Page of the router is not fully displayed

Disk Group requires rebalance because at least one disk is low on space.

I am getting alert over OEM Grid as below.
Message=Disk Group DSKGRP_UAT_01 requires rebalance because at least one disk is low on space.
Metric=Disk Minimum Free (%) without Rebalance
I tried query with;
select GROUP_NUMBER, DISK_NUMBER ,TOTAL_MB,FREE_MB ,(FREE_MB/TOTAL_MB)*100 from v$asm_disk order by 5 desc;
to find the disk group breached the threshold.
Let me know how can i query and find each file size on ASM Disk.
Edited by: Sivaprasad S on Jun 3, 2011 3:25 AM

Try this one:
select a.group_number , a.name , b.bytes , count(*) over ( partition by a.group_number , a.file_number , a.file_incarnation) doublecount
from v$asm_alias a , v$asm_file b
where a.group_number=b.group_number and a.file_number=b.file_number and a.file_incarnation = b.incarnation Note that there is a column named doublecount - if the value in that column is larger than one then we have two (or more) asm synonyms pointing to the same file. This should be taken into consideration when computing disk space.

When I select a photo to print from I Photo the following msg There were no themes located. Until at least one theme has been installed, this feature will be unavailable what procedure is required to install a theme

When I select a photo to print from I Photo the following msg appears " There were no themes located. Until at least one theme has been installed, this feature will be unavailable " What procedure is required to install a theme to print photos?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Requiring one checkbox among multiple.

Having an issue with a form.
It has multiple sections with checkboxes in each one. Ideally each section would be red or flagged until at least one box in that section was checked.
any thoughts?
Thanks again!

A lot of JavaScript programming.

Background job getting cancelled : Choose at least one scope of list

Hello to all,
I am trying to Run on Z report in background which conatins SUBMIT statement to standard progarm for MB5B .This report already programmed to call a report in background.It takes stocks for given period,I am taking the values using "import memory-id" statement.It gives an error log in SM37 as:
Choose at least one scope of list
Message no. M7829
Can we call a submit stmt in a report that is to run in background?? or pls provide any alternative for this problem??
Thnax & Regards
Sonal

Hi Sonal,
1. This is happening because there are some checkboxes on the selection screen
   which are ticked by default when we run in fore ground
   and are blank when run in background.
Hence the system gives the error meaning to select atleast one of them.
2. We can simulate this error in foreground also.
   There is one button on selection screen in the middle frame.
   "> Category"
   Just push it.
   Some checkboxes will appear now.
   Untick all of them and run the report. You will get the same error
Choose at least one scope of list
3. So while doing SUBMIT in the z report, you can pass the values of those checkboxes (which ever you require) as 'X'.
eg.
report abc.
submit RM07MLBD
with matnr = '3'
with pa_wdzer = 'X'.
4. The checkboxes field names are:
PARAMETERS : pa_wdzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdzew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwiz    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwuw    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndsto    LIKE AM07M-MB5B_XONUL
                          modif id liu.
regards,
amit m.

"must choose at least one" validation in dataTable?

Hello, group,
How do you validate a set of checkboxes, one per table row, in which the user must select at least one?
We have a page containing a dataTable, each row of which represents an object, one of whose attributes is "active". Our requirement is that at least one object must be selected as "active" by the user.
How do we validate this?
I'm considering the following:
(1) Put a validator on each checkbox that simply increments a count in a request-scoped bean if the checkbox is checked (and always returns success).
(2) Put a validator on a hidden field at the bottom of the form that requires the count be greater than zero.
Is there a better way? (Will this even work at all? :) )
Thanks.
John.

Looks interesting, thank you very much.
I would actually need the multiple row selector, I think, since the requirement is at least one. I see there's no "validator" attribute, but I assume we could just hang a f:validator off of it (or write our attribute and submit a patch!).
That jenia component set looks good for some other requirements we have.
John.

Require at least one checkbox?

Similar Messages

Maybe you are looking for