Require help with setting up MFA for On-premises RD Gateway

I've been unable to setup up MFA correctly. The only step by step guide I was able to find was: http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
I've tested this on a single server just as the guide, without succes. I now have 4 seperate servers:
1. GW server (which is also the DC)
2. NPS server
3. MFA server
4. RDS server
I'm not exactly sure what radius client, server and target to point to what. Could someone help me understand the sequence?
Much obliged!

RD Gateway uses NPS by default. RD Gateway uses its local NPS to send the RADIUS request to the MFA Server. The MFA Server typically proxies the RADIUS request back to NPS running on that same server. NPS validates the username/password with AD and returns
the Access Accept to the MFA Server. The MFA Server performs MFA and returns the Access Accept/Reject to RD Gateway. So you don't necessarily need a separate NPS Server. You just need the RD Gateway Server and the MFA Server in addition to your domain controllers.

Similar Messages

Matrix - Help with setting 1st column for line numbers

Hi,
I have created a matrix on a custom form and would like to add line numbers to the # column line that of the quotation screen.
The matrix itself is populated correct from the Query and LoadFromDataSource, and all the fields and columns are filled in correctly, the only column I am having trouble with is the 1st one for line numbers. My code for adding the line numbers is
SBO_Application.MessageBox("Matrix Count: " & tMatrix.RowCount)
For i = 1 To tMatrix.RowCount
      oEditText = tColumns.Item("#").Cells.Item(i).Specific
      oEditText.Value = i
Next
For the example I am using I get the message box appear:
Matrix Count: 26
So I know I should have the line number go from 1 to 26, however I only get 1 to 9 displayed, all the remaining lines are blank.
Any ideas on why it stops at 9 or what I should do to correctly set the line numbers in the Number column like that of the system Quotation/Sales orders forms.
Your help is much appreciated
Matthew

Hi,
I tried changing it to the following as you suggested:
SBO_Application.MessageBox("Matrix Count: " & tMatrix.VisualRowCount)
For i = 1 To tMatrix.VisualRowCount
    oEditText = tColumns.Item("#").Cells.Item(i).Specific
    oEditText.Value = i
Next
The message box still displays 26, however my lines still only go up to number 9.
Thanks for the quick response.

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

I require help with my first website

As you can see from many of my recent posts, I am new to web development, and I have decided that I am going to need some help.
This forum has been a huge help, and I will continue using it, but the reality of the situation is that progress is slow as I am learning as I go, each junction I reach and require help with is holding up progress, which wouldn't be a problem if I had more spare time, but I simply don't.
Is anybody willing to help me? It would be paid work so I would need to discuss how this would work with rates etc... here are some details:
The domain is already setup, and you can see the first page I have been working on here: http://www.elliotnewman.com/index/test7.html
The closet website I can find for your reference is: http://www.jaspaljandu.com/home/
My site will initially not be quite as established as Jaspal's, but in essence the functionality will be similar. The things I know of that I will need help on are:
Setting up the ordering and payment process when a customer wants to order a print, including automated email notifications, and check out forms ( this may also require membership fields or maybe through paypal)
Setting up the interactive framing graphics - ref - http://www.markgray.com.au/gallery/limited-edition-prints/forgotten-island.php
Potentially helping to setup a blog
Work with me on integration - and updates (ie build the all the templates needed so updates and new images can be posted by myself easily)
Automation of the counts of the limited editions
Setting up links to Facebook, twitter, linkedin etc
Reviewing and testing any code that I create
Along with these points I will also need standby help with the code I am directly working on, so file sharing may have to be setup. It is also worth noting that I will supply all the graphics and the design elements for every page, I will also be very specific with briefs as I know exactly what I want to achieve.
If anybody is interested please send me a private message, I would need to see some examples of your experience, details on your availability and your rate - whether thats per day, per hour and a rough estimate on how long you think the work will take.
Also, if anybody knows somebody outside this forum that you think could help me then please also forward this on.
Apologies if this is not the best place to post this.
Elliot.

Hi
In addition to Nancy s comments, reading the following line -
Along with these points I will also need standby help with the code I am
directly working on, so file sharing may have to be setup.
What you are basically after is a tutor, to guide you in what you are doing. In this respect it may be worth your while to read-up on designing web pages,as after a quick glance of the code, (from your previous post regarding the background image ) the main problem you are having is that you are not 'implementing' a consistent design/development procedure.
Try reading the following -
General tutorials on html, css, etc - http://www.w3schools.com/.
Design of web site, general - http://articles.sitepoint.com/article/principles-beautiful-web-design.
PZ
www.pziecina.com

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

Required help on setting up blaze DS.

Hi,
Required help on setting up blaze DS.
I have Blex builder 3 and Blaze DS turnkey version.
Would any one help me in setting up the java application on Blaze DS.
Do i require to place Blaze DS and flex(client code) on same system.
As of now i have Blaze DS on my local system and Flex on one of test server.
Thanks in advance
Regards,
Anil

Thanks, one question, i have downloded Blaze DS turnkey version, could not srtart tomcat which is in Blaze DS.
Hence making use of tomcat installed on my local system which is works fine. In order to settup Blaze DS i copied required jar files from Blaze DS and flex configuration files(xml files) .
However Flex Builder3 is installed on one of test server, when i tried to create Flex project i could not validate Server location.
Is it required to have both Java server and flex builder on same system?

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

Help with setting up my old ipad for my kid

Apologize if this has been discussed. I have an old iPad 1 with just Wifi, and I have just picked up the iPad 3 with Verizon. I currently have all of my apps on my ipad, and also a bunch of "kiddie" apps for my daughter. How can I reset my old ipad and set it up for my daughter?

To Reset All Settings: This will reset all
preferences and settings. Actual data
like calendars, media, and contacts are
not deleted.
Choose:
General > Reset, then tap Reset All Settings.
To Erase All Content and Settings: This
resets all settings to their original values
and erases all your information and media.
Choose:
General > Reset, then tap “Erase All Content and Settings.

Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

Help with making JLabel visible for a few seconds only

Hello guys,
I need help with making a JLabel object visible for a few seconds only and disappear when a JButton has been clicked.
Here is piece of code where I add mouse listener to the JButton object in my case is (jrbFigure1) and
when is called sets icon and text to the JLabel jlbl object:
jrbFigure1.addMouseListener(new MouseAdapter() {
jrbFigure1.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
jlbl.setIcon(cross);
jlbl.setText(wrong);
This piece of code is in a switch statement, the statement is in a method.
The JLabel jlbl object is added in a panel in the constructor of the class.
I really hope someone could help me on this issue.
I would like to thank you in advance for any help or advice given.

Bobson wrote:
Sorry for posting my issue twice, I thought, I posted it in a wrong forum:)It's OK. We'll ask the mods to delete the other thread.
I want the label to appear for X seconds when then button is pressed and disappear after that.Then a Swing Timer is what you want to use.
I need to do this in a number of cases from a switch statement because I several buttons.Better to have several ActionListeners, one for each button or each type of button, rather than one ActionListener with a large switch statement, a so-called switch-board listener. They're messy to debug and upgrade.
I tried to use Swing Timer, but I cannot set it properly.Go through the Sun Swing tutorial on Swing Timers. It's all outlined for you there: [http://java.sun.com/docs/books/tutorial/uiswing/misc/timer.html]

Require help with setting up MFA for On-premises RD Gateway

Similar Messages

Maybe you are looking for