Require HP ProtectTools Security Manager ver 7.0.0

Hi,When installing sp62348.exe Privacy manager for HP protect tools it is asking for installation get cancelled sayingHP ProtectTools Security Manager ver 7.0.0 is required. Please provide this.. Also when installing sp61498.exe it installs Microsoft Visual Studio 10.0 c++ redistributable files successfully and then get closed. Could not see the security manager application anywhere. Is this normal. I could not make enable for Fingerprint scanner yet. Installed the sp61821.exe as the device driver and the Device manager shows the Validity Sensor with driver version 4.5.117.0 under biomatric devices. Please help Thanks Sanoob

Hi:
See if the W8.1 Security Manager software from the 4440s works on yours too.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229487&swItemId=ob_124362_1&swEnvOid=415...

Similar Messages

I received the following error when attempting to use HP ProtectTools Security Manager to manage my passwords; Firefox doesn't know how to open this address, b

I use HP ProtectTools Security Manager to control my passwords. When i updated to Firefox 30. I received the following error message ; Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program. How can I solve this problem ?

Hi le.hamzou,
Previous suggestions were to update the Security Manager if there was one. There were also these add ons:
[https://addons.mozilla.org/en-US/firefox/addon/fingerfox-se/ Fingerfox], but I am not sure if it will work on win8, it does on win7.
Another work around I saw was [https://addons.mozilla.org/en-US/firefox/search/?q=ietab&appver=29.0&platform=all IE Tab].
This reference may also help [http://kb.mozillazine.org/Register_protocol]
Please post back with the results!

HP Protecttool Security Manager

Dear Sir
i have intalled hp protecttool security manager but it gives compitibality essue error.
can you please solve my problem or to send me another link of software download for windows 8.1.
Thank You

Hi @MF3,
Thank you for your query.
I understand that you getting an incompatibility message when trying to install HP Protect Security Manager.
Please read this post by Advice for asking the "Very Best Question by @ThatGarenGuy
To begin with I would need more information.
What is your exact model of HP notebook?
How Do I Find My Model Number or Product Number?
What Operating System are you running?
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Uninstall HP ProtectTools Security Manager

Hello, Can you please help me with HP ProtectTools Security Manager removal? (HP ProBook 4530s)Reasons: /slowing Windows startup and login /extremely slow loading /can not remove user password /blocking some security accesses (I´m admin, so why is this???) I tried to uninstall it via Windows Control panel, side-provided software and also by following uninstall-steps found somewhere in forums. All these metods (3) with no results... Nothing works. I would really appreciate some help or tips. Thank You

Mrsenter,
FINALLY GOT IT WORKING!
After 50+ hours of installs, uninstalls and reboots I found the problem and fix.
Problem: Everytime I uninstalled the fingerprint driver it automatically re-installed itself with these files
C:\Windows\system32\ATSwpWDFColnst.dll
C:\Windows\system32\DRIVERS\ATSwpWDF.sys
C:\Windows\system32\WdfCoinstaller01007.dll
After this happened a funny thing happens. The option Device Manager_Other devices_ Fingerprint Sensor then dissapears
Fix:
Just after the fingerprint driver reinstalls itself theres a window of about 20 secs where the option Device Manager_Other devices_ Fingerprint Sensor still appears. At this point I right clicked and updated that driver as per instructions http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DigitalPersona-AuthenTec-fingerprint-and-Windows-7/td-p/218831.
The correct files for the fingerprint driver are now:
C:\Windows\system32\DRIVERS\ATSwpWDF.sys
C:\Windows\system32\TrueSuitColnst02020000.dll
C:\Windows\system32\WdfCoinstaller01009.dll
C:\Windows\system32\WinBioPlugins\ATEngineAdapter.dll
And now it works...
Tip: Download fingerprint Driver before and have it extracted so you can make the 20 sec window for updating the driver
Many thanks,
Sa

HP ProtectTools security manager

When I use my Probook 4430s with windows 7 (x64), I can use HP ProtectTools security manager. But now, I can't with win 8.1 x64. Do you have any software for managing password by using fingerprint?
This question was solved.
View Solution.

Hi:
See if the W8.1 Security Manager software from the 4440s works on yours too.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229487&swItemId=ob_124362_1&swEnvOid=415...

HP ProtectTools Security Manager and Windows 10

I am going to be updating to Windows 10, howevver it is saying that the HP ProtectTools Security Manager is not compatible with Windows 10. 2 questions I have. The first is: Is there going to be a replacement for these tools for Windows 10?Second is: How do I uninstall the tools so that I can proceed, properly?

Indeed! These instructions are useful but there is a newer version of Client Security Manager http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_141863_1 Just to inform others users, HP protect tools security Manager has been rebranded to Client Security Manager. So it's the same software, they just change the name and the logo

HP Protecttools Security Manager Suite for Windows 10

Where to I find a Windows 10 compatible HP Protecttools Security Manager Suite for download? Had to uninstall when upgrading to Windows 10.

@Honour Student, how did you make copies of the installers? I'm hopelessly out of my depth here and need to be walked thru. I own a Probook 4540s notebook running windows 7. My processor is intel core i5. I really don't want to lose my fingerprint swipe security feature. Please I need help, this stuff is driving me nuts

Disable or uninstal HP ProtectTools security manager

My fingerprint scanner has gone down.
I assume it is a hardware issue as have gone through all HP recomendations to get it working at: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02519007&lc=en&jumpid=reg_r1002_us...
but nothing has worked.
Anyway the notebook never leaves my house so it's not an issue. However, everytime I turn the notebook on and log in with my password, HP security manager butts in and spends a minute looking for the reader before telling me the biometric authentication service is not working and asks if I would like to continue without it.
Can I disable this program to speed boot up time as it is not needed in my instance?

Hi @taliz ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, You could follow these steps, even though, I don't recommend this as it is Security Tools.
Step 1:Click Start, then "All Programs." Select "HP Protect Tools Security Manager" from the list of programs.
Step 2:Click "Settings." Click the box to the left of the menu. The green check in the box should disappear, which means that the application is disabled.
Step 3:Close the window and restart the computer.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Digitalpersona´s HP protecttools security manager does not recognize sign in pages as such with FF4

With FF3.6 and previous, when visiting i.e. my bank site, and loading a sign-in page previously recorded with sign-in info and passwords stored with ProtectTools Password Manager, I was prompted to fill and submit such stored info. Since upgrade to FF4, the mentioned soft does not recognize sign in pages as such, therefore, not prompting for fill in and submitt, nor does it recognize sign in pages on any site, to prompt for recording the sign in info or password.

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

How to uninstall Hp ProtectTools Security Manager?

I want to install Windows 10 but for that it shows that I need to uninstall all the Hp softwares like ProtectTools etc. Anyway so how am I supposed to do that? Cause I tried doing that from Add/Remove Hardwares and it says to uninstall the rest of the applications and I can't find that. So any help how to do that? Thank you.

Hello @HEIRSON ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, click on start, control panel, go to programs and features. Uninstall programs from there.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Needed urgent help for user creation in security manager in ODI 11g

Hi Gurus,
I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
Now I will explain what i have tried out:
I am working on ODI 11.1.1.5.
I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
Thanks in advance,
SB

Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?

Uninstall hp protect tool security manager

I have installed "hp protect tool kit security manager" But I face a problem that when I shut down my system it goes to that point where the windows logon. it does not completely shut down. and when I try to uninstall it demand for pasword, but I didn't gave any password. and when i enter the windows password it gives invalid password error.
kindly give me some. I don't want to refresh windows.

Hi @Aqeel_Rafique ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Elitebook and issues with HP ProtectTools Security Manager password. The password could be the one that you use to log onto your Notebook or entered at the BIOS.
You could follow these steps, even though, I don't recommend this as it is Security Tools.
Step 1:Click Start, then "All Programs." Select "HP Protect Tools Security Manager" from the list of programs.
Step 2:Click "Settings." Click the box to the left of the menu. The green check in the box should disappear, which means that the application is disabled.
Step 3:Close the window and restart the computer. Then try to uninstall the software
Provided by 3rd Party site.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Protecttools Security Manager

Hey, is it necessary to remove HP Protecttools Security Manager? Because the computer says that I have to uninstall it to be able to download Windows 8.1

Hi @imaqsood ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, I have looked into your issue about your HP ProtectTools Security Manager and not able to uninstall the software. Click Start, then "All Programs." Select "HP Protect Tools Security Manager" from the list of programs.
Click "Settings." Click the box to the left of the menu. The green check in the box should disappear, which means that the application is disabled as it must be disabled to uninstall it. Close the window and restart the computer.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

CSM (Cisco Security Manager) automated policy discovery

Hi,
Does anybody know if it possible to automate a policy discovery on a group of objects?
Essentially I have two CSM servers running in seperate locations, one primary and one secondary and want the secondary to do an automated policy discovery on a number of ASAs to keep the secondary database/policies up to date.
I can't find any obvious way to do this.
All the best,
Andy

Farruk,
Many thanks for the link.
Requirements:
To install Security Manager in a dual-node HA environment, you need two servers that can access a shared storage array.
Unfortunately this is not an option for the current setup, which is why I am having to revert to a active/active type setup.
The secondary CSM will be happy if it does a policy discovery. It's just a matter of finding out how to get this automated discovery on a regular basis.
All the best,
Andy

Access to IPortalComponentRequest in custom security manager

Hi All,
I am implementing a custom security manager. For my requirements, I need IPortalComponentRequest object in the security manager class. Can anyone give me a clue to get the request object in security manager implementation.
Regards,
Yoga

Hi Romano,
I tried this. Its returning mysapsso2 cookie and authentication_schema cookie. But not retuning any custom cookies added to the response from any other application.
What I have tried to achieve is:
1. When a user login and authentication suceeds, I will add a custom cookie to the response.
2. Get the custom cookie added in the security manager class and do manipulations to check whether the user is authenticated.
Using the method you have suggested, I was not able to get any custom cookies added in other applications.
I tried the code using resource context(resource context obtained form IUser) as suggested in other threads,
HttpServletRequest request = (HttpServletRequest) resourceContext.getObjectValue("http://sapportals.com/xmlns/cm/httpservletrequest");
But this API returns null.
Any way to achieve?
Regards
Yoga

Require HP ProtectTools Security Manager ver 7.0.0

Similar Messages

Maybe you are looking for