Require Information for Log Archiving

Hi,
I have ECC 6 system with MAXDB 7.6.5.015,
i want to know the step for LOG Archiving.
And also when we have to restore the system what data should we have,
like a complete backup, incremental back and logs .
Can you explain the scenario.
Thanks in Advance.
Regards,
Ritesh Bhatia,

Duplicate due to connection problem

Similar Messages

Is 15 second for log archiving acceptable ?

Version : 11.2.0.3
Platform : RHEL 5.4
3-Node RAC
DB in ARCHIVELOG mode
Question1
============
As you can see below sometimes it takes upto 15 seconds for the archiving of Redo logs.
Online redo log switching is happening fast though . It takes less than 2 seconds (maybe not fast enough for you guys )
Is this acceptable ?
--- Log archiving is slow
SQL> set timing on
SQL> alter system archive log current;
System altered.
Elapsed: 00:00:11.08
SQL>
SQL>
SQL> alter system archive log current;
System altered.
Elapsed: 00:00:10.77
SQL> alter system archive log current;
System altered.
Elapsed: 00:00:15.06
SQL>
SQL>
-- But log switching is fast !
SQL> alter system switch logfile;
System altered.
Elapsed: 00:00:01.89
SQL> alter system switch logfile;
System altered.
Elapsed: 00:00:00.21Question2.
=========
For a DB in archivelog mode, ALTER SYSTEM ARCHIVE LOG CURRENT and ALTER SYSTEM SWITCH LOGFILE have the same effect . Right ? I mean, both of these commands asks the archiver process to archive the ORL which is being currently written to. Right ?

It's fast enough as long as you don't fill up all the online redo before you are finished archiving the first one. It's a round-robin, so if you get all the way around to the first one which is still being archived, everything will stop until it is done.
The ALTER SYSTEM ARCHIVE LOG CURRENT waits for the archiver to finish archiving, so it is slower than ALTER SYSTEM SWITCH LOGFILE, possibly much much so with larger redo.

Scammed on skype (require information for paypal c...

Hi,
I have recently been scammed by a user on skype. i have all the information including a log of our conversation. is there anyone that can assist me with this? i need his information for paypal, i can be send to paypal privatly aswell.
Regards

you can send a detailed report to [email protected] so Skype can check the possibly suspicious activities of that user. However, Skype is limited to doing against against their account. If you feel still necessary, you can also consider reporting that user/person to your local police. Then your local police can contact Skype to request for possible assistance.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Export Clip information for Log Sheet

Has anyone tried to export Clip information into excel? In FCP7 I'd export a Batch List and then import into excel. We have over 2,000 clips logged into CS6 and would like the information in an outside document for our director and assistant editors.
Thanks.

I don't know of any way to get that info out.

Requiring Password For Logging Into Airport

This should be simple, but I need a solution that I am finding illusive at the moment.
Since I've recently purchased a new MacBook, my older iBook is now mostly in the possession of my daughter. I want to make it so that joining my current Airport connection will require a password so I can be aware of when she is on the internet. (i.e. I'll have to make Airport active for her.)
This detail in the documentation is not turning up with the ease that I would wish.

Checkout AirPort 5.0 Help: Password-protecting your wireless network.
When you enter the password on her iBook to join the network, you will need to ensure that the option to add the password to the keychain is NOT enabled.
You will also have to force her to log out or restart her iBook after her allowed use so that the AirPort connection is broken and the password disregarded. If she merely sleeps her iBook, the password will be remembered and she can continue to use the network.

Unclear about requirements/information for Edge vs Contract plans.

I am currently on a 8GB/70 Shared data plan with a corporate discount. I have 4 smart phones and 2 iPads. My total bill is $241.60 + Taxes. Our contract on all 4 phones is now up as of 2/1/15. I have been asking questions about switching to the edge plan. We plan on keeping the new phones for 2 years so all we care about is total cost.
I have received completely different answers to my questions depending on who I talk to. I think we'll save about $550 over 24 months on Edge if we switch to the 10GB/$80 plan. Here are the questions I asked and the answers I was given. Answer #1 is from a Verizon phone rep. Answer #2 is from a Costco person. We are planning on getting a 6 16GB, 6 64GB, 6+ 16GB, and 6+ 64GB. Can someone help make clear what answer is right to each question even though they seem to always be polar opposites.
Questions:
1. If I switch to edge do I have to trade in my current phones even though they are out of contract? Answer #1: Yes you must turn in all phones to Verizon. Answer #2: No you can keep your phones since you have already met your contract requirements.
2. If I pay off my phone after 24 months do I keep the $25/month discount/line? Answer #1: When your phones are paid off your line charge will have the discount removed. Answer #2: They won't remove the charge unless someone manually removes the discount. They won't pay someone to go remove all those discounts on all those edge plans.
3. Say I only wanted to get 3 phones for now and keep one off contract could I get the edge discount on the 4th phone? Answer #1: Never. Answer #2: Depends. They can't do it at Costco but if I call over and over and be nice someone might add it to the 4th line for me.
4. Once all four edge phones are paid off and it has been 24 months do I have to turn in phones to get new edge phones? Answer #1: You must turn in phones for new phones. Answer #2: Once you have paid off phones they are yours to keep. The only time you have to turn in phones is if you don't pay off entire amount say 75% then you have to turn in phones to get new phones.
5. Are the taxes lower/line on edge because I am assuming they don't tax the payment for the phone and some of the taxes/fee are based on percentage? I didn't get an answer on this.
In addition to the questions above can someone make sure my math is correct?
Contract 8GB/$70/month: $70 - 8.4 discount + $40x4 + $20(ipads) = $241.60/month. Up front costs $1028 + $140 (activation fees) from costco = $1168 total up front.
Edge 10GB/$80/month: $80 - 9.6 discount + $15x4 + $20(ipads) = $150.40/month + $124.97/month (phone payoff for 24months) = $275.37/month and no activation fees or phone upfront cost (costco pays sales tax and gives fifty per line back on first bill for each phone).
That means we are paying 34.37 extra a month for 24 months = 824.88 instead of the 1168 upfront fees which is about 300 cheaper. That is if we don't have any tax savings and doesn't include the 200 credit for edge with Costco.
Anything I am missing I am just trying to understand what the gotchas are and if there are any downsides to Edge that I don't know about since I am not getting straight answers.

thank you Snn5 and ummgood I am sorry.. the only question I failed to answer was .. at the end of the 2 yrs with a EDGE device ,, if you chose NOT to EDGE UP ..meaning turn in the device your purchased and upgrade to continue on the plan.. If you don't wish to Edge Up you must pay off the remaining balance of your Verizon Edge device, either in full or according to the scheduled monthly installments. After your Edge device is paid off, you can purchase a new device under a 2-year service agreement. this is listed in the link I attached for you... and was the reason I stated above the review the link.
the EDGE is just a feature that helps customers upgrade their device by allowing them to make installment payments ,,, giving them a slight discount on the access line to help ease the normal cost...they are given 2 yrs to satisfy their agreement,,, at the end of the period or anytime during they have the option to EDGE UP ,, which allows them to change out the device by trading in the original EDGE device for a new one and starting the cycle all over..
so to break this down per your questions
#1 no you do not have to turn over any existing equipment you already have/had prior to the edge program
#2 the device you purchase in order to be placed on the EDGE pkg must be paid off within the 2 yr time frame and the payments are broken down by Verizon and this is WHAT is the determining factor of what the EDGE plan will cost you before the line access charge and data charge is included
#3 the number of devices under the EDGE pkg is ten.. you must have at least 1 that is a new device that you will be making payments on and the number of NEW devices you may have is determined by VERIZON but no more than 10 new total.. as it is the payments against the new device that qualifies the program
#4 yes any EDGE device (devices that were originally purchased in order to get the EDGE pkg) must be turned in to EDGE Up... whether paid up or with at least 75% paid off.. IF you do not wish to EDGE UP after the 2 yr time frame.. you may purchase NEW devices and go back under that standard plans Verizon has to offer...
#5 No company can lower sales tax,, the installments are configured against total cost.. which would be the device(s) taxes and any other surcharges
the last part.. the cost.. you are listing an up front cost .. I would check with VERIZON to see how much you qualify to do under installments,, as COSTCO can not do that,,the price they are quoting actual cost of them selling the devices...
so the EDGE is designed the allow payment installments,, that part no one here can estimate the monthly cost as we do not have access to your data nor can we set a total amount for Verizon to allow installments on.. that is why you need to contact them directly ... EDGE cost of monthly installment (according to amnt Verizon can set for you divided into payments) plus for every SMARTPHONE device you purchased you receive $15.00 off their line fee if you include at data plan that is at least 500mb to 8 GB and $25.00 per smartphone off line fee for data plans 10 GB or higher YOUR activation fee is waived for device purchased under the Edge plan...
THAN you can save even more by adding a calling plan,, like the MORE EVERYTHING plan which has the unlimited talk, text, hotspot/wifi, the data plan can be shared instead of a separate plan per phone . international message, the Cloud storage plan ..etc.. without know exactly what your devices are and how much Verizon will allow your acct to do under installments,, the total monthly NO ONE here is able to answer.. .but the monthly on the MORE EVERYTHING is $140 plus the discounted line fee per device.. the link will advise the devices allowed and the amount of each line fee
The MORE Everything Plan FAQs | Verizon Wireless
and placing the order through Verizon you will get $150 credit applied for EACH qualifying Smartphone you purchase under the EDGE plan...
again I apologize for not fully breaking it down this way as all of this is broken down in the original link I gave.. and if I have missed any thing,,, please,, let me know and I will be happy to go over it with you..
>> Edited by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

More than 1 AAA server for logging in to WebVPN

Hi everybody,
Does anyone know if ASA supports simultaneous authentication more than 1 AAA server? I've created LDAP and SecurID token account for every users and want them provide both account information for logging in to WebVPN.
Please advice.
Thanks for advance,
Nitass

If you are aaa server you are referring to is "radius server", then you can try out the following commands.
In ASDM you would simply add the said RADIUS servers to the "server group"
If you wish to do this through CLI, you would define a group eg
aaa-server radius protocol radius
aaa-server radius host x.x.x.x
aaa-server radius host y.y.y.y
aaa-server radius host z.z.z.z
and you would then call this in the said tunnel-group :
tunnel-group opsource type ipsec-ra
tunnel-group opsource general-attributes
address-pool admin_ra
authentication-server-group radius LOCAL
default-group-policy opsource

How to find required information in order to log on Business View Manager?

After Business Object Client installation successfully, I try to log on Business View Manager, but failed. One pop-up windows(Log on BusinessObjects Enterprise) come and let me put the information as below;
System:
User name:
Password:
Authentication:
Could anyone let me know how to find the above required information? Thanks!

You need to find this information from a person who installed server part of this deployment.
System: Name of the CMS server
User name: Administrator or other user name that exist in the Enterprise
Password: obviously...
Authentication: type of the authentication setup on the server side for the user you will be using.

Unable to find moniker information for archive collection ArchiveCollection

In attempting to setup archive transfer between PROD and DEV I needed to rename an existing outgoing provider and the only way I found I could do this is to delete the existing provider and recreate it with a new name. I think by doing this it has caused and issue and now the CS log displays an error similar to below:
Unable to find moniker information for archive collection ArchiveCollections. The collection ecmprd2 has no information associated with it. It no longer exists in the system. [ Details ]
An error has occurred. The stack trace below shows more information.
!csMonikerUnableToFindArchiveInfo,ArchiveCollections!csArchiverCollectionNotFound,ecmprd2
intradoc.data.DataException: !csArchiverCollectionNotFound,ecmprd2
     at intradoc.server.archive.ArchiveUtils.getCollection(ArchiveUtils.java:492)
     at intradoc.server.MonikerWatcher.parseMonikerInfo(MonikerWatcher.java:325)
     at intradoc.server.MonikerWatcher.computeMonikers(MonikerWatcher.java:248)
     at intradoc.server.MonikerWatcher.notifyWatched(MonikerWatcher.java:154)
     at intradoc.server.Service.notifyWatched(Service.java:710)
     at intradoc.server.Service.updateSubjectInformation(Service.java:670)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1128)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Does anyone know if this is caused by deleting the existing outgoing provider and if it is how can I resolve it?
Regards,
Andrew

I misspoke when I said to recreate the outgoing provider because an outgoing provider only provides the "connection" from DEV to PROD. What I meant is that if the provider is deleted and the automated archives are left alone, they would fail because that connection is gone. Since you recreated an outgoing provider (even with a different name), that connection should be there again.
I highly doubt each archive "stores" the name of the outgoing provider in its configuration, so I doubt either of those options would work. The only thing that makes sense is that the collection is "gone" (ie. DEV cannot find 'ecmprd2') or the PROD collection isn't called 'ecmprd2' anymore. I'm assuming "ecmprd2" is the instance name of your PROD instance, right? If you can, try deleting all archives and see if the error exists afterwards.
Why did you have to "rename" the provider to begin with?

Always prompting of log in information for users

I have a requirement to always prompting of log in information for users in SharePoint site rather than taking their logged in credentials.
Any idea??

To deactivating Windows-Integrated authentication and use basic authentication. Refer to the following post for more information
http://sharepoint.stackexchange.com/questions/61652/force-users-to-log-in-to-our-sharepoint-intranetsite
http://sharepoint.stackexchange.com/questions/68784/how-to-set-default-login-with-windows-prompt-for-all-intranet-users
--Cheers

Job that must be programmed to collect information for system log (sm21)

Please, Who is the job that must be programmed to collect information for system log (sm21) ?
Thank you very much.
Hugo.

Before you reinitialize your log shipping configuration, check to see if you can take a differential backup and restore that on top of your standby database. This is relatively easier than to take a full database backup just to reinitialize
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course
I can take a diff backup.. But in my secondary, when i right click standby >tasks-->restore-->i can see only option to restore transaction log file. Other options are greyed out. How can i restore a diff backup now. If i bring the DB online with
restore with recovery, i have to restore a full backup before i can apply a diff backup.
Somebody provide me insight on below error
This secondary database is not functional because
the required copy or restore job cannot be found. You must remove this secondary database by clicking Remove. To resume log shipping to this secondary database, add it as a secondary again using the same settings.If
you resume log shipping and you specify the same restore path that you used before, any backup files that are uncopied or unrestored to this database will be copied and restored when it is added as a secondary again. Reinitializing the secondary database
is unnecessary."
I can see the LS_restore job and the job is running as per the schedule, we dont run copy job because
the backup directly falls in secondary server. wats the reason for the above error.

RPC request to the Microsoft Exchange Information Store service for log truncation

Hello all
Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
the file. Also log files are not being flushed
Bulls on Parade

Hello,
Please verify backup software.
Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
failed state, please restart the Exchange replication service and then check the status again.
Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
check configuration information for MAPI network and Replication Network.
If the above configuration information is ok, please check if there are other related errors in application log.
Cara Chen
TechNet Community Support

Two entries for each archive log in v$archived_log

Hi,
I have noticied that there are two entries for each archive log. Why this is so...?
I have fired following command.
==================
set pages 300
set lines 120
ALTER SESSION SET nls_date_format='DD-MON-YYYY HH24:MI:SS';
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
==================
output is as follows.
==================
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
==================
Regards
DBA.

I have noticied that there are two entries for each archive log. Why this is so...?Mseberg already mentioned.. little in detail as below
Check for the name column in v$archived_log,
One location refers to Local destination LOG_ARCHIVE_DEST_1
Other location refers to your standby/DR location, But it will shows you only service name instead of full archive name.
select dest_id,name from v$archived_log where name is not null and completion_time like '%24%FEB%'
   DEST_ID NAME
         1 +ORAARCHIVE/prod1/archivelogs/arch_0001_0671689302_0000240097.arc
         2 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=sldb1srv)(POR
           T=9101)))(CONNECT_DATA=(SERVICE_NAME=prod_sldb1srv_XPT)(INSTANCE_N
           AME=prod1)(SERVER=dedicated)))Edited by: CKPT on Feb 24, 2012 8:26 PM

Itunes 11.4.0.18 crashing when clicking on app store Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open

Itunes 11.4.0.18 crashing when clicking on app store
Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open app store.

Click here and follow the instructions to change the iTunes Store country.
(97125)

Capacity leveling log showing duplicate information for Resource

Friends,
Need one help.
When I am looking into the Capacity leveling logs, I see duplicate information for every Resource. There is no difference in the information regarding resource utilization (before/after). For every resource we are getting this duplicate records in the logs. Sometime there is one difference on timing, (when the resource was processed by the background job.)
Text . Details . Current Date . Time
Resource W10_U0JA_001
Parameters
Resource utilization
Resource W10_U0JA_001
Parameters
Resource utilization
There is no difference in details resource utilization, yet resource are shown two times, for every resource.
We are on SCM 7.0 . Is this standard? if so, then why?
Can you please share your opinion/thoughts. Thanks a ton.
Satyajit

Hi Satyajit,
This can happen because of resource setting in APO.
You need to check the following:
Bucket definition
Resource utilization
Time Zone
You should check also the "Time-Cont Capacity" tab details where start, end and break time is maintained,
You should also verify the "External Capacity" Tab data
There is no other reason apart from that.
You can also check the PPMs which are using this resource and some setting in PPM modes and other operation data.
If it is okay then possibility you need to check the model and version assignments.
You can remove the version assignment and delete the resource and again CIF it to APO.
Possibly it will help.
Regards,
Vishal

Require Information for Log Archiving

Similar Messages

Maybe you are looking for