Require license key

Hi,
I would like to obtain license key to continue may instllation for Crystal Report 8.
I will be glad to have this key as soon so possible so that i can have this software install into my notebook as ssom as i could.
Can i have some one to advise on thie licenckey.
Look forwardt to hear from you.
Regards,
Ming Ming

Hi,
1. Currently, the 'request keycode' process for external customers is to first logon to http://service.sap.com/licensekey. Look for the "Service Corner" and click on "Request license key".
If you have any problems with this process, please create a Customer Message in the SAP Support Portal using the following component: XX-SER-LIKEY-BOJ
2. During the BusinessObjects migration to SAP systems, if you experience difficulties requesting keys, keycode issues can still also be requested by completing the form at http://www.businessobjects.com/forms/email/license/
3. A PDF document containing temporary license keys can be downloaded at http://service.sap.com/licensekey
4. For any license key issues that cannot be resolved by these methods, please contact your Account Manager.
Regards,
Edited by: Aditya Joshi on Sep 26, 2008 11:58 AM

Similar Messages

JBuilder 8 WebLogic Edition eval requires license key

I have installed JBuilder 8 WebLogic Edition eval, but it requires a license key
to use it. The install and readme docs have no information on how to satisfy
this. Please help.

On 12 Jan 2003 10:22:26 -0800, "Brian Welnack"
<[email protected]> wrote:
>
I have installed JBuilder 8 WebLogic Edition eval, but it requires a license key
to use it. The install and readme docs have no information on how to satisfy
this. Please help.Just an FYI - the only real difference between the JBuilder 8 WebLogic
edition and the Enterprise edition is the WebLogic edition comes with
a WLS 7 developer license. If you already have that, then I would
recommend simply getting the JBuilder 8 Enterprise Edition.
Another different: JB8-WL Edition will only deploy and debug to
Weblogic. There's no support for other web servers like Tomcat, for
example. Now, that's fine if you are specifically developing for
WebLogic, but you should still keep that in mind.
hth

License key for software installation

I can not find my license key for the new hp deskjet 1010 printer that I bought and I have the disc that came with the printer but my laptop does not have a place to put a disc in for installation so I tried to download the installation info for my printer from the internet and I keep getting ask for my licensing key number but I dont know where to find this info. Please advise.

Hi, Which license key are you talking about ? hp deskjet 1010 printer does not require license key to install. Please use the CD which came with the peinter. Regards.

Package created with Creative Cloud Packager and volume licensing key- sign in required

Hello, we have used Creative Cloud Packager and volume licensing key to create Adobe Photoshop CC v.6 and other apps packages, tested before deployment. Deployed the image on iMAC computers, users are getting Sign in Required/ registration details message. Tried to use AAMEE to create serialization file, but it does not recogise packages created by Creative Cloud Packager. appreciate any advice. thank you.
Svetlana

HI Abhijit,
All our students have network home folders, the issue is that some students can open Photoshop and it will be activated, other students will be prompted to activate PHotoshop when they try to open it. We have tried to delete photoshop plist and adobe photoshop settings folder from students Library/ Preferences folder but it did not help.
We'll test the APTEE utility tomorrow, I will post the results. Thank you.
Svetlana

Does SAP business one require solution manager for license keys ?

Does SAP business one require solution manager for license keys or you can directly get the license key from service.sap.com?

Hi,
Welcome you post on the SAP business one forum.
In general, only SAP partner can get the license key. However, partner can assign the right to customer so that they can get it from portal directly.
Thanks,
Gordon

How to determine the download media required from my License key?

Hi
After recently rebuilding a dead PC, The user has advised me she used to use Illustrator.
Unfortunately the user does not have the install media available.
Support advised my license key is a volume license for Design Standard.
I have downloaded Design Standard (Universal) but the Licence key is not accepted.
Can anyone advise how to determine the correct download based on my License key?
Many thanks

Some times you may need to sign in to volume licensing account and download
refer
Adobe Licensing Website | Serial numbers | Orders | Accounts

I am having to reinstall Adobe Pro because of a hard drive failure. I have lost the License Key and need to know how to retrieve it so I can reinstall the product.

How do I retrieve the Adobe Pro License key/# so I can reinstall on my computer. I had to have the hard drive replaced due to failure and don't have the necessary information to reinstall Adobe Pro.

As this was a 1,000 USD + purchase I did registered back in 2008 when I got my copy of "Adobe Creative Suite 3 Design Premium". And now I'm in the same situation as you. I did go to manage my account and found my serial number.
My disk crashed completely and I got everything back and running from my Time Machine backup. A few days ago Illustrator said there was a licensing issue. I tried all their gradual solutions up to the very last one: Reinstalling.
I did that and inserted the Serial number; it worked. Now that I'm opening the Adobe Acrobat Pro it requires me to input the serial and it says is invalid!
Anyone has an idea about this?

I bought a new pc with windows 8.1. I want to install photoshop elements 10 (nl version) on my new computer, but I lost my license key. I deleted everything from my old computer. What do I have to do?

On my old PC with windows XP I was working with photoshop elements 10 ( NL version).
Now I bought a new faster PC (windows 8.1) and installed photshop elements 10 (L version on that new PC.
The problem is that I can't find my license key. The old PC is gone so I have a problem activating photoshop elements 10 on my new PC.
What can I do to get it running?
Best regards,
Gobi345

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

How to get Windows Server 2012 trial license key?

How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)

Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim

Retrieve License Keys to software if mac does not start up

I have a white MacBook running 10.6 Snow Leopard. I received it from a friend that had forgotten the admin pass, but is was still useable, as there was a standard user on it with no password that I could use. I then needed to install some new software, which required the admin password, so I followed the steps here to reset the password.
However, once I rebooted the Mac, it became stuck on the Apple Logo.
I have tried several different ways to make the Mac boot (start up from Install DVD and repair disk, run steps to reset password again), but none of them work. I know that I could simply use the install disk to reinstall the OS, but I have quite a lot of expensive software that I do not want to lose (Photoshop, Illustrator etc).
I have been able to gain access to the Hard Drive using Target Disk mode, but I know from previous experience that if I simply copy the applications across to an external HD, reinstall the OS and copy back, it will ask me for a license key (which I do not have).
Is there any solution to my problem?
Is there a file I should edit to make my computer boot?
Is there a location where Adobe programs store their license keys that I could copy to prevent me losing my software?
Thanks in advance

If your getting to the log in window you are NOT on the OS Install Disc..
Just make sure you have the disc in the drive and Then shut down by holding the power button down... Then restart holding down the "C" key... If the disc ejects.. keep holding "C" and pull the disc out one inch then gently slide back in.. Keep holding C.... You will get a few screens then the install screen... STOP.. go to utility's menu at the Top of window... open "disk Utility".. highlight your FULL HD.. Click the button to the right ..OK Heres the deal.. I would erase/ re format the HD.. You will resolve any issue with the bad install.. But remember you will have a blank HD so if you didnt back up.. Well... Then Do your Install.. Nice and clean ... Best of luck....

Kodo 4.1.2 license key problem

Has anyone tried the JDO tutorial provided with Kodo 4.1.2? Everything works fine until I try to create the mappings with 'mappingtool -p jdo.properties package.jdo'. Then I get:
Exception in thread "main" com.solarmetric.license.LicenseException: No product
license key was found. Please ensure that you either have a valid "license.bea"
file in your CLASSPATH or in the directory specified by the "bea.home" environme
nt variable, or else that you have a valid license key specified in the "kodo.Li
censeKey" property of you Kodo configuration. If you need to request an evaluati
on license, please go to http://commerce.bea.com or contact [email protected]
at com.solarmetric.license.License.<init>(License.java:67)
at kodo.conf.KodoCapabilities.newLicense(KodoCapabilities.java:133)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:38)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:22)
at kodo.jdbc.meta.KodoClassMapping.validateMapping(KodoClassMapping.java
I'm running the tutorial using the kodocmd.bat and I changed the properties to point to kodo's install directory and my jdk home directory.
I've downloaded the xml document at 'http://ftpmain.bea.com/download/pub/license/kodo/kodo40/license.bea', named it license.bea and put it in kodo's install directory which is on the classpath.
I think the problem is getting Kodo to recognize the license outside of a web application. I am trying to use Kodo in a standalone application and obviously need it to recognize the license key.
Regards,
Jake

Hi Jake,
I don't think the problem is getting Kodo to recognize the license outside
the web application (I am also working on a standalone application). I think
the problem is that the code still requires the "old" solarmetric license
key next to the bea license key. I actually run into the same problem if I
don't specify both keys. Since I still have several important bugs already
open for months and registering an issue requires writing complete testcases
including manuals how to use these test cases, I actually didnt even bother
to register this one.
kind regards,
Christiaan
<Jacob Bowers> wrote in message news:[email protected]...
Has anyone tried the JDO tutorial provided with Kodo 4.1.2? Everything
works fine until I try to create the mappings with 'mappingtool -p
jdo.properties package.jdo'. Then I get:
Exception in thread "main" com.solarmetric.license.LicenseException: No
product
license key was found. Please ensure that you either have a valid
"license.bea"
file in your CLASSPATH or in the directory specified by the "bea.home"
environme
nt variable, or else that you have a valid license key specified in the
"kodo.Li
censeKey" property of you Kodo configuration. If you need to request an
evaluati
on license, please go to http://commerce.bea.com or contact [email protected].
at com.solarmetric.license.License.<init>(License.java:67)
at kodo.conf.KodoCapabilities.newLicense(KodoCapabilities.java:133)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:38)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:22)
at
kodo.jdbc.meta.KodoClassMapping.validateMapping(KodoClassMapping.java
I'm running the tutorial using the kodocmd.bat and I changed the properties
to point to kodo's install directory and my jdk home directory.
I've downloaded the xml document at
'http://ftpmain.bea.com/download/pub/license/kodo/kodo40/license.bea', named
it license.bea and put it in kodo's install directory which is on the
classpath.
I think the problem is getting Kodo to recognize the license outside of a
web application. I am trying to use Kodo in a standalone application and
obviously need it to recognize the license key.
Regards,
Jake

Does a trial version of Acrobat X Pro needs a license key to operate it?

I just downloaded the trial version of Acrobat X Pro but when I downloaded a PDF sent to me by e-mail, it opened it with the Acrobat X Pro, then a window opened requiring a License key number, if not I had to purchase the product, o cancel the operation. Therefore I could not print the PDF that I needed! Does anybody know where I can access the license key # for a trial version?

Trials have no serials. Refer to this:
Adobe trial software expired early
And if all you need is print a PDF, the free Reader will do that just fine.
Mylenium

Transferring Coldfusion to a new server - Upgrade license; Can't find old license key HELP!!

I am currently in the process of porting over my data from another server to a new server.
On that server I am running ColdFusionMX7 Standard and want to continue running it on the new one.
Coldfusion is currently loaded on the new server through a trial edition but when I try and enter the Serial Number I see on the Coldfusion on the server I am currently operating, it prompts me that "You have entered an upgrade license key (XXXXXX-XXXXX-XXXXX-XXXXX), which requires you to enter the license key of your previous version of ColdFusion."
Do you have any advice on this? Is there any way to find that old license on the old server?
Thanks!

Contact support by web chat.
Mylenium

PI 7.10 Problem applying NetWeaver_ORA (Standard) License Key in ABAP

We are attempting to license our PI 7.10 (Windows 2003 /64 on Oracle
10.2.0.4) installation, but are having problems. This is a dual stack
installation (of course) and I have downloaded the requested license from
service.sap.com. This is license type Standard (NetWearver_Ora). The
license installs correctly and shows as valid in slicense, but in the
area above the Installed Licenses in the Database, it shows RED for
NetWeaver_Ora and says, "A valid license key for this software product is
required to operate this system."
When attempting to logon as a user other than sap*, we get a license
failure and no logon.
saplicense -get -- returns HARDWARE KEY = 01480339654
Old licenses tab screen is blank (no licenses installed) as I have
deleted the temporary license, thinking that the digital license had
installed correctly.
Digitally-Signed Licenses screen:
(Red traffic signal) NetWeaver_ORA A valid license key for this software
product is required to operate this system
Installed Licenses in the Database
(Green traffic signal) PID 01480339654 NetWeaver_ORA 30.09.2008
31.12.9999 Perm 0020412052 000000000311063393 Valid
No further entries on this screen.

Hi All - This issue was resolved. Basically, I made copies of all the current profiles used by SAP and deleted the old ones. Then, I just simply renamed them to the old profiles names of the ones I just deleted and it seemed to have worked. It was probably one of those quirky things with Windows. Thanks! - Will S.

Limit for license key Process Server Service. JCL_ FTP is exceded

Hi All,
We are getting strange error in Redwood. Now we are not able to start process servers. Process servers were running fine and we were able to run jobs. For some activities in UNIX server we stopped the unix process server and now we are getting strange error while starting process server
9:52:51 PM: JCS-102204: Limit for license key Process Server Service. JCL_ FTP is exceeded; limit is 0, changes require 1.
And we are not able create any new process servers also with job definition type System or Job Chain. While creating we are getting same error.
We have license ProcessServerService.JCL_FTP with the value true.
To create new process server we don't need any JCL_FTP license. Don't know why we are getting strange error.Please help me on this.
Version: SAP 7.00
Build: M26.10-29140
Thanks,
Preethish

Issue is fixed in next version of SAP CPS

Require license key

Similar Messages

Maybe you are looking for