Require list of all events for Windows Server 2008 Active Directory

Hi all,
I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
Regards,
SR

Hi,
Thanks for your posting.
Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
to collect them into one file.
Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
Directory to record other events in the directory services log, we need to modify registry.
For more information please refer to following MS articles:
Active Directory Diagnostic Logging
http://technet.microsoft.com/en-us/library/cc961809.aspx
How to configure Active Directory diagnostic event log
http://support.microsoft.com/kb/314980
Lawrence
TechNet Community Support

Similar Messages

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Windows Server 2008 Active Directory Trust

Hi ,
Can anyone help with the answer to the following questions please?
a) Whether Microsoft Windows Server 2008 SP2 Standard Edition support AD trust relationships (one-way; two-way)
b) Whether we can create trust between Windows Server 2008 R2 SP1 and Windows Server 2008 SP2 Standard Edition AD servers?
Thanks in advance.
India1947

Hello,
First of all, please confirm the firewall on the Windows Server 2008, the TCP/IP filter or any 3 party firewall is not blocking the RPC and ICMP traffic between two domain controllers.
1.    Have a test of creating and verifying trust while all firewalls are all disabled. Then re-create and verify the trust to check how it works.
Allowing Inbound Network Traffic that Uses Dynamic RPC
http://207.46.196.114/windowsserver2008/en/library/d37f96c6-c729-4b29-80a9-88db3d97b8631033.mspx
2.    If it still fails, please try to collect the following information for our further investigation:
-      Run "Netdiag /v >>netdiag.txt" on both DCs
-      Network Monitor trace when verifying the trust:
Download the NetMon3.1 from the following link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=18b1d59d-f4d8-4213-8d17-2f6dde7d7aac&DisplayLang=en
1.    Install the NetMon on Windows Server 2008.
2.    In the Microsoft Network Monitor 3.1 window, click Create a new capture tab….
3.    In the new tab, select all the Network Adapter in the Select Networks window.
4.    After that, press F10 to start NetMon.
5.    In the Active Directory Domains and Trusts, try to verify the trust to reproduce the issue.
6.    After that, go back to the Netmon window and press F11 to stop the Netmon on the Windows Vista machine.
7.    Press Ctrl+S to save the Netmon files.
Please send files to [email protected]
Note:
a. Please include the following three lines for this issue in the email body:
Trust Windows Server 2008 and Windows 2000
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3210801&SiteID=17
Miles Li - MSFT
b. We will continue to discuss the issue here in the newsgroup and will NOT reply via emails.
c. Pease post a quick note in the current thread to inform me after sending the email.
Thanks.

Windows server 2008 Active Directory with PT8.49

Hi All,
i m using the follwoing:
PeopleTools 8.49
HRMS & Campus Solution 9.0
i wnat to know is Micrososft Window 2008 Server Active Directory supported with peopletools 8.49
Regards,
Irfan

My favorites are RODCs and AD as a service.
Microsoft explains it in detail here:
http://technet.microsoft.com/en-us/library/cc755093(v=WS.10).aspx

What is the most powerful books for Windows server 2008 and R2?

Hi,
There are many books out there that cover Windows server 2k8 and its R2 successor but i wonder which ones to focus on. In the same time, all books are for one purpose, "Windows Server 2008". Each author has his/her own view on the platform. I don't
want to read them all just to avoid confusions and complications.
These are the list of books that i have along with books that i finished reading them:
Exam 70-640 Configuring Windows Server® 2008 Active Directory® (Finished this)
Exam 70-642 Configuring Windows Server 2008 Network Infrastructure (Finished this)
Exam 70-643 Configuring Windows Server 2008 Application Infrastructure
(Finished this)
Exam 70-646 Windows_Server__2008_Server_Administrator_Second_Edition (Finished this)
Mastering_Windows_Server_2008_R2 (Finished this)
McGraw.Hill.Microsoft.Windows.Server.2008.Administration.Feb.2008
McGraw.Hill.Microsoft.Windows.Server.2008.The.Complete.Reference.Feb.2008
OReilly.Windows.Server.2008.The.Definitive.Guide.Mar.2008
Sams.Teach.Yourself.Windows.Server.2008.in.24.Hours.May.2008
Sybex.MCTS.Windows.Server.2008.Active.Directory.Configuration.Study.Guide
Windows Server 2008 Active Directory Resource Kit (Finished this)
Windows Server 2008 Networking and Network Access Protection (Finished this)
Windows Server 2008 Unleashed
Windows Server 2008 R2 Unleashed
Do you think the unfinished books worth reading?
Appreciate your help.

Thank you for the reply. My goal is to read everything (ins and outs) about Win 2008 and R2 platforms before i jump into Win 2012. I have pretty good experience in certain roles in Win 2008 such ADDS and ADCS. As clarified, i've finished a good number of
books but i want to make sure that i didn't miss a single piece of information that maybe covered in another book.
Honestly, i find the Technet docs are informative but daunting. On the other hand, books written by authors are more friendly because authors can throw jokes while explaining a certain technology, which makes the reader more attracted to the topic. In addition,
examples, practices, labbing, and quizzes in the books are more fun.

REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

pLEASE HELP ME TO DOWNLOAD A CORRECT SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

On Mon, 9 Mar 2015 11:34:37 +0000, AVINASHJHA wrote:
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
If you have any trouble sounding condescending, find a Unix user
to show you how it's done. -- Scott Adams

Required weblogic 10.3.5 instllable for windows server 2008(64bit)

Hi,
I have been trying to find the weblogic server(10.3.5), CO(13.4), BO(13.4) and POS(13.4) installable for Windows server 2008(64bit) but am unable to find them in e-delivery or anywhere else on Oracle website.
Can anyone please provide me the link for these software downloads.
Thanks.

Hi
On this below link, look for older versions of Weblogic Server which is at the bottom of the page. Expand for WLS 10.3.5. You need Weblogic Server + Coherence package installer. Download the generic jar installer.
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
See this below post for more details:
Re: Why So Difficult To Find WebLogic Server 10.xx for Windows 7 64-bit??
Thanks
Ravi Jegga

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Issue Installing SP2 for Windows Server 2008 SP1

Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.

Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000)

Performance Tuning Guidelines for Windows Server 2008 R2 mistake?

Hi all,
I'm reading the "Performance Tuning Guidelines for Windows Server 2008 R2" and I think there is same kind of error. At page 53 there is a sub chapter "I/O Priorities" that explain how to handle I/O priorities.
In the guide it is said that in the registry I have to have a key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\{Device GUID}\DeviceParameters\Classpnp\
Where {Device GUID} I think it is the value I get in device manager under one of my disks -> properties -> details -> "Device Class GUID"
the trouble is that under the key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\ I've no subkey matching my disk's device class guid! Maybe I'm drunk but I've checked every sub key under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\
but neither of them as a subkey named "DeviceParameter"!!
So am I wrong?

Hi Andrea,
To find the "DeviceParameter", please try to follow the steps below:
1.Find this registry key and note the DeviceInstance value:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\
2.Find the device instance registry key under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum" which contains information about the devices on the system and get the device interface GUID:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<hardware id>\<instance id>\Device Parameters
I hope this helps.

What are the netsh cmd line for windows server 2008,2012 ?

Hi
I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
Before Netsh cmd support for all os including Win 8,win 8.1.
I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
This is my code in asp.net using vb
Dim pip As New Process()
Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
pip.StartInfo = pipa
pip.StartInfo.UseShellExecute = False
pip.StartInfo.RedirectStandardOutput = True
pip.Start()
pip.WaitForExit()
And if change ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
I can change ip,subnet,gateway,both dns is some other way,below is the link
http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
Pls reply asap
Regards
Aravind

For the shell scripting I'd try them here.
Scripting forum on MSDN
Scripting Guys forum on TechNet
For the asp.net I'd ask over here.
Microsoft ASP.Net forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Management Pack for Windows Server 2008 Enterprise SP1

Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?

Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801

Oracle db 11gR2 for windows server 2008(64 bit)

Hi,
i want to download the Oracle DB 11gR2 installable for windows server 2008(64 bit), but i am unable to find it in e-delivery or anywhere else in oracle website.
Please let me know if this installation is possible or not and the link from where i can download the installer.
Thanks in advance.

Hi;
All related information cover at below notes:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Release Schedule of Current Database Releases [ID 742060.1]
Database 11g Release 2 Certification Highlights [ID 1065024.1]
Regard
Helios

Office Jet pro 8610 for windows server 2008 R2

I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.

Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Require list of all events for Windows Server 2008 Active Directory

Similar Messages

Maybe you are looking for