Require new tab at header level in ME21N using BADI

Hi All,
My requirement is add new tab with 8 new fields plus one button. On pressing this button header data need to copy at item detail level. I found two BADI's for that.
ME_GUI_PO_CUST & ME_PROCESS_PO_CUST. Till now I am able to create new tab with require fields.
Now help to put how to transfer data from header level to item detail level on pressing newly created push button.
Also tell me how these data will save in EKKO table.

Hi Vikas,
hOPE U CAN USE
PROCESS_HEADER
PROCESS_ITEM methods of the badi used and the data will be stored in EKKO table if u populate them .
let me know if any issues ....
regards

Similar Messages

Additional tab at header level in ME21N through BADI ME_GUI_PO_CUST

Hi,
I want to have additional tab at header level in ME21n through BADI ME_GUI_PO_CUST. But after all effort I am not getting display of tab. Let me explain what i did till now
1. Appended table EKKO with field
2. Create one function Group -under that
A. Created one Include u2013Paste the code given
DATA: call_subscreen   TYPE sy-dynnr,
      call_prog        TYPE sy-repid,
      call_view        TYPE REF TO cl_screen_view_mm,
      call_view_stack TYPE REF TO cl_screen_view_mm OCCURS 0,
      global_framework TYPE REF TO cl_framework_mm,
      global_help_view TYPE REF TO cl_screen_view_mm,
      global_help_prog TYPE sy-repid.
FORM SET_SUBSCREEN_AND_PROG *
--> DYNNR *
--> PROG *
--> VIEW *
--> TO *
--> CL_SCREEN_VIEW_MM *
FORM set_subscreen_and_prog USING dynnr TYPE sy-dynnr
prog TYPE sy-repid
view TYPE REF TO cl_screen_view_mm.
call_subscreen = dynnr.
call_prog = prog.
call_view = view.
ENDFORM. "set_subscreen_and_prog
B. Created one screen (9000)
3. Implemented BADI ME_GUI_PO_CUST and paste the code.
data: ls_subscribe like line of re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = ' ZMMSCR1'.
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = ' ZMMSCR1'.
ls_subscribe-struct_name = 'EKKO'.
ls_subscribe-label = text-001..
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please help me what s going wrong .and what else I will do to get success.
Edited by: Vishal A Vijaywargia on Jul 29, 2009 2:24 AM

Hi Prosengit,
I am not aure about u r BADI,
BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
IN thi senhancement u have thrre screen exits.In this enhancement
SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
u can add subscreen and u can add u r own fields here .
and u can write u r code in 'EXIT_SAPMM06E_006'.
if u want to change the title of the program.
Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
I hope this solves u r problem.

New Tab on header level for me21n/me22n/me23n

Hi Friends
i have created a new tab on the me21n/me22n/me23n header level using the exit
MM06E005 , The tab is displayed but i am not unable to udate the records into the
EKKO Table whereas i have added my field in the include of EKKO CL_EKKODB
Kindly somebody help me with elaborated steps .
Thanks & Regards
Digvijay Rai

Hi Digvijay,
Once the data is entered on the screen ..code is written to update the table ie...
flow of data from custom screen for header is OK..but for display and change we need to
import the data in a similar manner to the customer subscreen or the tab added in header level
As you can see the following 3...code must be done in EXIT_SAPMM06E_006/007 to fetch data to customer subscreen for display/change actions..use 006/007 for PBO/PAI actions..
EXIT_SAPMM06E_006   Export data to customer subscreen for header(PBO)....INCLUDE ZXM06U36
EXIT_SAPMM06E_007   Export data to customer subscreen for header(PAI)....INCLUDE ZXM06U38 .
EXIT_SAPMM06E_008   Import data from customer subscreen for header
Pls check and revert..in addition
go to smod->MM06E005-> "documentation" -> Display to read more on documentation about data flows and exits used for it
Hope it helps
Regards
Byju

TO ADD TAB AT HEADER LEVEL IN ME21N

Hi guys
I have to add a tab at header level of ME21N using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST
can someone guide me how to do this?
Thanks

Hi,
Try with SMOD enhancement MM06E005. I know this works well for adding a tab in PO header or item level . Read OSS 407975 for implementing this screen exit
here i am pasting OSS Notes and if you need clearly then login into service.sap.com
Symptom
You are using SAP customer enhancement MM06E005. There is no sample source code for this enhancement.
Other terms
User exit, customer enhancement, MM06E005, example, sample
Reason and Prerequisites
You want to activate user exit MM06E005. Note that this is a consulting note and not a correction of the user exit.
Solution
You can use the sample source code attached here to recognize the basic functions of the exit. This example is, however, only one of many options that are offered by the customer enhancement.
The sample source code includes the following functions:
Supply of an additional field on header level
Supply of an additional field on item level
Derivation of a field on item level from the copied reference document
Now, in order to be able to use the sample source code, you must create field ZZFLAG on the header level of the document and field ZZFIELD on the item level.
Double-click on Include table CI_EKKODB
Enter the following values:
Name    Component type DType Length DecPlace Short text
ZZFLAG CHAR1          CHAR 1      0        1-digit indicator
Save and activate the include table.
Double-click on Include table CI_EKPODB
Enter the following values:
Name    Component type DType Length DecPlace Short Text
ZZFIELD CHAR1          CHAR 1      0        1-digit indicator
Save and activate the include table.
In order to activate the sample source code, you additionally have to carry out the following changes on screens 0101 and 0111.
1. Screen 0101: Create the following fields:
              "Checkbox"            Name: EKKO_CI-ZZFLAG
2. Screen 0111: Create the following fields:
              "Input/output field" Name: EKPO_CI-ZZFIELD
              "Pushbutton"          Name: BUTTON
                                    FctCode: ZZDETERMINE
The following assignments apply to the sample source code:
EXIT_SAPMM06E_006 --> LXM06F36
EXIT_SAPMM06E_007 --> LXM06F38
EXIT_SAPMM06E_008 --> LXM06F37
EXIT_SAPMM06E_009 --> LXM06F39
EXIT_SAPMM06E_016 --> LXM06F41
EXIT_SAPMM06E_017 --> LXM06F42
EXIT_SAPMM06E_018 --> LXM06F40
Copy the source code from the attachment and insert it into the corresponding function modules. Save and activate the function modules.
Create the following variables in the corresponding TOP include in order not to get any syntax errors:
INCLUDE ZXM06TOP
data: gl_aktyp type c,
      gl_no_screen type c,
      gl_rekko like ekko,
      gl_ekko_ci like ekko_ci,
      gl_ekpo_ci like ekpo_ci,
      gl_ekpo like ekpo,
      gl_ucomm like sy-ucomm.
types: begin of ekpo_tab,
          ebeln like ekpo-ebeln,
          ebelp like ekpo-ebelp,
          ekpo like ekpo,
       end of ekpo_tab.
data: gt_ref_ekpo_tab type table of ekpo_tab.
Save and activate the TOP include.
On header level, you can now store a character, X or space, via field ZZFLAG on the database with the document and read it also again.
On item level, you can fill field ZZFIELD with a one-digit value and save it with the document. If you copy this document, the system displays an additional function button on tab page "Customer data". If you press this button, the value of the reference document is copied to field ZZFIELD.
If you want to store the source code as sample source code in your system, start Transaction SMOD. Enter MM06E005 as an enhancement. Select "Components". Press "Change". Position the cursor on the corresponding module and choose "Sample code". Create the corresponding include and copy the source code from the note. Save the include. Note that, of course, syntax errors may occur when you check components. This is because the includes of the sample code are not integrated into a program but rather are completely independent and, therefore, do not have any relationship to each other either. For this reason, only save the include and do not activate or check it. The sample code has to be copied into the corresponding function modules in order to become active.
If you use the user exit in the new purchase order, it is not guaranteed that the customer screen is always processed. To make sure that possible required fields are checked, include a corresponding message into the EXIT_SAPMM06E_012. This screen is always processed.
Header Data
Release Status: Released for Customer
Released on: 07.09.2006 13:07:34
Priority: Recommendations/additional info
Category: Consulting
Primary Component: MM-PUR-PO Purchase Orders
Secondary Components: MM-PUR-GF-CE Customer Enhancements
I have not done BADI for PO,so i am not sure that whether BADI will work for Screen exit or not
Thanks
Seshu

Adding a new tab on item level in me21n tcode

Hi all.
i am adding a new tab on item level in me21n tcode.
i want to make this tab to be shown on the screen when the order type is UB is stock purchase order.i dont know how to make this condition and where should i place it so that this tab can come in effect only when the stock purchase order appears.
please help.thanks

hi
chk this
Re: New tabs in the header tab-sheet of ME21N/ME22N/ME23N
hope this helps
regards
Aakash Banga

Add a new tab in subitem level of Tcode ME23n

Hi all,
I have a requirement to add a new tab under a tab in item level.
I have added a new tab in item level successfully by using BADI: 'ME_GUI_PO_CUST'
However, I don't know how to add a new tab under the tab customer data that is at Item level.
If you have any solutions Please share me.
Thanks in Advance,
Hung To

Hi Hungto,
Goto --> Tcode se51 -->program name : SAPLXM06
Screen No : 0111
Make the changes in this layout.So that changes will reflect to customer Data tab at Item level in Me22n.
Use tabstrip or create a subscreen for the above program name.
This may helpfull to resolve your problem.
Thank you,
Thanks,
AMS

Addition of new tab in header and item screen of MIGO - Steps required.

Hi Gurus,
Can anyone give me the exact steps to add screen tab in migo transaction. I have the badi MB_MIGO_BADI to add the new tab but I want to know what are the exact steps to implement it.
Thanks,
Shibashis

Hi,
Try this.
1. Create one screen as subscreen in tcode se51.
2. Create implementation for badi.
3. if u want to add this tab at header level, then go inside PBO_HEADER interface of badi. and write this code.
check i_class_id = gf_class_id.
e_cprog = text-001. " Program name of screen
e_dynnr = text-002. " screen No.
e_heading = text-003. " Name of the tab.
clear :e_cprog ,e_dynnr ,e_heading.
endif.
4. In INIT inter face write this.
append gf_class_id to ct_init.
5. GF_CLASS_ID , declare this in attribute as label constant and type MIGO_CLASS_ID.
6. Functionality for this tab you can write in PAI_HEADER.
Regards
VIshnu Gupta

Inactive (grayed out) thumbnails in New Tab. I have 6 in use, 3 grayed out.

Inactive (grayed out) thumbnails in New Tab.
I have 6 in use, 3 are grayed out. I tried dragging a bookmark into the thumbnail but that actually opens the website instead of fixing the thumbnail. How do I activate these grayed out thumbnails? Firefox 29. Windows7. Thank you.

The thumbnails are generated from the disk cache, so make sure that the cache is enabled and working and that you do not use "Clear history when Firefox closes" to clear the cache as this disables the disk cache (see about:cache).
Note that pages loaded via a secure HTTPS link aren't showing on the about:newtab page and also pages that aren't in the cache for some reason (they may be sending no-cache headers; see Tools > Page Info > General) have no thumbnails.

When I click on 'open a new tab' or if I select 'new tab' from the file menu a new tab does not open. It used to.

When I click on the tab to 'open a new tab' or when I select 'new tab' from the file menu then a new tab does not open. It used to.

This has recently been answered below - Ask toolbar issue - this was the problem

Issue in adding new tab in PO Header Level on ME21N

Hello,
As there are many thread where it has mention how to implement badi to get the required output.
Similarly, i had used the badi ME_GUI_PO_CUST and the method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
My Doubt :
From the below sample code, from where i have to create the subscreen, Program name.
For ME21N the program name in status is showing SAPLMEGUI.
Sample Code from other thread and my doubts are next to it..
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = 'SAPLZPONEWTAB'.   "This is the name of subscreen but it shows the standard one (shall i create a program and then add a subscreen and use here?)
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = 'SAPLZPONEWTAB'. "Shall i use the program name SAPLMEGUI here
ls_subscribe-struct_name = 'ZPONEWTAB'.    "Why this is required, as in my case i want to show some fields from EKKO table
ls_subscribe-label = text-001.
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please advice...

Hi,
Thanks for the reply.
I have done the things..but, i can't see the tab in the header level.
Below is my code with my comment.
Note :
I created a Function Group by name SAPLZPOHEADER.
In se80 by giving the name ZPOHEADER i created a subscreen. Also created a structure as ZPOHEADER using it displayed the fields in the screen.
Code under IF_EX_ME_GUI_PO_CUST~SUBSCRIBE :
DATA: ls_subscriber LIKE LINE OF re_subscribers.
      CLEAR: re_subscribers.
      REFRESH: re_subscribers.
IF im_application = 'PO' AND im_element = 'HEADER'.
    CLEAR re_subscribers[].
   ls_subscriber-name = subscreen1. "As per the sample code i double click and set the attributes of it as same as sample code.
   ls_subscriber-dynpro = '9000'. "This is the screen no
   ls_subscriber-program = 'SAPLZPOHEADER'.   "Name of the FM Group/Program
   ls_subscriber-struct_name = 'ZPOHEADER'.     "Structure Name
   ls_subscriber-label = text-001. "Created label as 'doc header'
   ls_subscriber-position = 11.    "Given the position as i want after 'status' in ME21N
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
Is anything remaining as in debug mode it fills the re_subscribers and go the 'Create Object' but, can see it in display.
Pls help...

Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N

Dear all,
i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N,
but the tab is not coming
following is the code snips, please tell where is the error, or some setting needs to be done
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
if sy-tcode eq ' ME21N' OR SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'.
CHECK im_application = 'PO'.
CHECK im_element     = 'HEADER'.
CLEAR re_subscribers[].
ls_subscriber-name = 'Customer-Data'.
ls_subscriber-dynpro = '0101'.
ls_subscriber-program = 'SAPLMEGUI'.
ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
endmethod.
Regards
Sumodh

Hi...I hv similar requirement.
I need to show a custom field in the screen for the items.
I tried using the methods "SUBSCRIBE" and "MAP_DYNPRO_FIELDS" as explained in the sample code.
Below is my code. I have copied the sample code and changed it lil.
Method "SUBSCRIBE":
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLZMMPO1'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMM_PO_CUST_SCREEN'.
a label can be defined
ls_subscriber-label = text-t01.
the position within the tabstrib can be defined
ls_subscriber-position = 13.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
method "MAP_DYNPRO_FIELDS":
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
*- customer fields
CONSTANTS: mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
LOOP AT ch_mapping ASSIGNING <mapping>.
    CASE <mapping>-fieldname.
      WHEN 'CLMNO'. <mapping>-metafield = mmmfd_cust_01.
    ENDCASE.
ENDLOOP.
I created a function group - "ZMMPO1" and created the subscreen 9000 in that. I placed the custom field in that screen. Tha main program of ZMMPO1 is "SAPLZMMPO1".
I created a structure also - "ZMM_PO_CUST_SCREEN".
I want to know whether this is sufficient to display the tab on the screen or am I missing something.
It is mentioned that the implementation of "ME_PROCESS_PO_CUST" is a pre-requisite.
could you lemme know the process please.
Thanks,
Ram.

How to add one new tab at item label in me21n

hi experts,
i am very new in badi .can any one please tell me how to add
one tab in me21n at item label. i already checked sample code for
badi me_gui_po_cust. i create one implementation and write same code.
this code is coming in debugging mode but cant see that tab while executing
me21n.
please help me out.
thanks in advance
manasi

Hi Manasi,
acording to me you are on the right path.Some help
1.ME_GUI_PO_CUST.
For Creating Customer own Screen - Purchase Order..
Details :
Go to the sample code of this BADI.
For this create a Function group with the screen that u want in PO.
In the First method u want to append the screen . There is one parameter im_element.
In this parameter u can mention that in which part u want the screen .Header/Item.
2. ME_PROCESS_PO_CUST
In this BADI u can Check the Complete PO at various Level.
ie Header Level ,Item Level, At the time of Save, Post .
Now Create a Include in your Function group and paste the below code.
DATA: call_subscreen TYPE sy-dynnr, "#EC NEEDED
call_prog TYPE sy-repid, "#EC NEEDED
call_view TYPE REF TO cl_screen_view_mm, "#EC NEEDED
call_view_stack TYPE REF TO cl_screen_view_mm OCCURS 0, "#EC NEEDED
global_framework TYPE REF TO cl_framework_mm, "#EC NEEDED
global_help_view TYPE REF TO cl_screen_view_mm, "#EC NEEDED
global_help_prog TYPE sy-repid. "#EC NEEDED
FORM SET_SUBSCREEN_AND_PROG *
--> DYNNR *
--> PROG *
--> VIEW *
--> TO *
--> CL_SCREEN_VIEW_MM *
FORM set_subscreen_and_prog USING dynnr TYPE sy-dynnr
prog TYPE sy-repid
view TYPE REF TO cl_screen_view_mm.
call_subscreen = dynnr.
call_prog = prog.
call_view = view.
ENDFORM. "set_subscreen_and_prog
Hope to solve ur probs.....
Regards
Renu

Unable to add custom tab in ME21N using BADI ME_GUI_PO_CUST

Dear All,
I need one extra tab in Item Details of ME21N.
This extra tab should have two fields of my own.
I have put the coding in the SUBSCRIBE method of the implementation of the BADI ME_GUI_PO_POST as follows:
data: ls_subscriber like line of re_subscribers.
we want to add a customer subscreen on the item detail tab
check im_application = 'PO'.
check im_element = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
clear re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = 'Event Details'.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZSM_PO_STRUC'.
a label can be defined
ls_subscriber-label = 'Event ID'.
the position within the tabstrib can be defined
ls_subscriber-position = 5.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
append ls_subscriber to re_subscribers.
I put breakpoints in the implementation of the method, and it is going into it, yet the extra tab is not getting displayed on the screen.
Please give your suggestions on this.
Regards,
Prosenjit.

Hi Prosengit,
I am not aure about u r BADI,
BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
IN thi senhancement u have thrre screen exits.In this enhancement
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
u can add subscreen and u can add u r own fields here .
and u can write u r code in 'EXIT_SAPMM06E_006'.
if u want to change the title of the program.
Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
I hope this solves u r problem.

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

How can we disable/Hide the buttons at items tab in header level Gen tab?

Hi,
How can i disable/Hide the buttons(Delete,insert...) in item details of general tab of Order Header?
I am not able to do it with screen varients.
Please let me know your views.
Points will be given.
Thanks,
Adi.

Hi,
How can i disable/Hide the buttons(Delete,insert...) in item details of general tab of Order Header?
I am not able to do it with screen varients.
Please let me know your views.
Points will be given.
Thanks,
Adi.

Require new tab at header level in ME21N using BADI

Similar Messages

Maybe you are looking for