Required: a short cut to fixing my anamorphic problem

I have a problem to which I can see a long, long way of fixing.
Naturally I'm hoping Final Cut has some easy way of fixing it that I don't know about.
I shot HD footage on a Sony HDV camera, which I translated in camera to DV-PAL. The camera added letterboxing which worked fine.
I imported the footage into Final Cut and started cutting the project. I made sure the sequence was set to 720x576 but I enabled anamorphic. This meant that the footage looked fine in the viewer, but had pillarboxing and letterboxing.
I rechecked the sequence settings and thought that I was in some way mistaken and that it will all be ok when I export the footage.
How wrong I was. The letterboxing and pillarboxing shows up in exported Quicktime formats. It occurred to me why.
The footage I've got is now actually more narrow than 720 pixels because I worked with rendered sequences (to save memory).
Those rendered sequences are where my problem lies.
Is there a way of reconnecting with the clips and asking Final Cut to re-render the clips into fresh sequences that are properly set up? I did one and it worked fine. Unfortunately my video is about eight minutes long and comprises of loads of cuts from lots of different places.
I can imagine that because of the way Final Cut sees the media, it should be possible to have a more automated way of doing this involving either a EDL or XML.
Please, help.

Have you tried closing the Mail and Photos apps completely ? From the home screen (i.e. not with the app that you want to close 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail and Photos apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • Short cuts not work

    all of a sudden none of my short cuts will work even if I delete them and try to add a new short cut .All the icons are white and blank.I have windows 8.

    Hello @hatescreennames,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your shortcuts on your computer running Windows 8 have stopped working. I recommend that you use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to a point in time where your shortcuts did work correctly. This will fix any settings that may have been altered in your computer to cause the issue you are experiencing.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Keyboard short cut not working in iOS 6 on iPhone

    I just tried adding a new keyboard short cut on my iPhone 4S with iOS 6 and the short cut will not stay on the phone.  I can enter it and it is added to the list of short cuts until I go back one screen, then the shor cut disappears.  This worked fine under iOS 5 and still works fine on my iOS5 iPod Touch.  Any ideas how to fix this?
    Thanks
    Fred

    I have an iPhone 4 with current iOS.
    I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
    Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
    In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
    Just wondering if this common among iPhone 4 users.

  • Creating a Windows 7 OS desktop short cut for gmail with Firefox as browser, not internet explorer

    I have an HP laptop that originally had Windows Vista Home Premium 64-bit OS. I recently upgraded to Windows 7 64-bit OS. I want to generate a desktop shortcut for gmail that uses Firefox as the browser not internet explorer (8). If I use IE 8 as the brower and enter in gmail.com, gmail opens. I can right click on that page and create a gmail desktop short cut with IE 8 as the browser. If I try the same steps using Firefox as the opened browser, I can't create a desktop short cut by right clicking...it is not an option. I can't make Firefox my default browser for everything as my work programs/shortcuts require IE. Again, how do I create a direct gmail desktop shortcut that uses Firefox as the browser, not IE 8, when IE 8 has to be the default browser?

    You could create a shortcut to open Firefox with a specific site using a command line argument.
    You can copy the shortcut that you use to open Firefox, then right-click on it and choose '''Properties'''. On the shortcut tab, you will see the target, it will look something like this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    You can add gmail.com to this shortcut so it looks like this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" gmail.com
    For more details see http://kb.mozillazine.org/Command_line_arguments

  • Rectangular Marquee Tool (Short cut M)...

    I have upgraded to CS5. I cannot access to the Rectangular Marquee Tool with a short cut (M) any longer. M brings up the Eliptical Marquee Tool. Where is the Rectangular Marquee Tool? How can I access?
    Thnx

    Check the units you specified for the fixed size. My guess is that it's set to something larger than your image.
    Yes, thanks - I was just about to post a response to my own question. They were cm, rather than pixels!
    Cheers
    David

  • Create custom short cut key for colon

    I have a Macbook Pro 10.8.4 Lion, but when I upgraded from Mountain Lion, my keyboard went a little wacky. I could of spilled something withnot noticing, but honestly I think I would remember. The help support had no ideas to fix the issues despite our attempts.
    So is there a way to create a custom short cut for a key not in a menu? I need to create a short cut key for the colon and semi colon lol.
    Thanks!

    Edit Menu > Keyboard Shortcuts > Product Area: Window Menu > Workspace Load 1st, 2nd, 3rd, etc. Create a new set and assign a shortcut

  • Short cut key

    Hello,
             I'm facing a problem in assigning short cut key ( which is not defined in the button property list)  to the command buttons. 
             Please find the attached snapshot of my front panel vi. where in I have placed seven buttons next to each other. 
    My requirement : 
    1.    In run-time i need to move focus from one button to another from right to left as well as left to right using keyboard navigation keys. How can I do it?
    2.    Command should be executed only if the button is pressed twice. i.e once the button is pressed it has to ask for confirmation. Is there a possibility to do it? 
    Thanking you,
    Mr Sushmith
    Thanking you,
    Sushmith
    Solved!
    Go to Solution.
    Attachments:
    button.png ‏3 KB

    Hello,
    Can u please explain me how can I use event structure?? Or is there any other alternative?
    Thank you,
    sushmith
    GerdW wrote:
    Hi sushmith,
    1) Use an event structure to capture navigation keys and to set key focus (by PropertyNode!) accordingly...
    2) Use an event structure to capture the ValueChange event for those buttons. Show an additional dialog to confirm operation...
    GerdW wrote:
    Hi sushmith,
    1) Use an event structure to capture navigation keys and to set key focus (by PropertyNode!) accordingly...
    2) Use an event structure to capture the ValueChange event for those buttons. Show an additional dialog to confirm operation...
    Thanking you,
    Sushmith

  • I am on NYT website second page , how do I get back to main page as key board short cut

    I have gone to another page on website ie NYT or medical journal on web , I have read the article now I want to go back to main menu, Any keyboard short cuts other than back back etc.

    ''How do I get back to my original page after reading several articles from that page''
    {Mac user}
    You've indicated a preference for '''[https://support.mozilla.com/kb/Keyboard+shortcuts keyboard shortcuts]'''. There is no keyboard shortcut to go back a known or unknown number of pages within the same tab without using BACK, BACK, BACK ("Alt+left-arrow" {"command+left-arrow"}). There are a couple of exceptions to this.
    '''Suppose NYT is your home page''' and you want to throw away everything in the tab with Ctrl+W {command+W} (was close the window but with tabs that is now close the Tab). So you do that and then you want to reopen your home page use "Alt+Home" {"Option+Home"}.
    Another way of doing but without NYT being your home page, would be to make a bookmark with a '''[http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcut]''' such as "NYT:" or "NYT". So you would do exactly the same time as before but instead of bringing up your home page use the keyword shortcut to bring your NYT page. I recommend "'''[https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/ Add Bookmark Here ²]'''" extension (60.4 KB) for working with keyword shortcuts and its additional bookmarking features ([http://dmcritchie.mvps.org/firefox/addbookmarkhere2.txt additional documentation]).
    If you change your method of browsing to try to keep Tabs with only one level in them then you can use keyboard shortcuts to close each tab after reading it. There are two main methods of reading reading articles. Say we start with a bunch of blogs in a bookmark folder and open that folder into tabs as a starting point.
    '''One method''' is to read the main blogs '''without interruption''' except to open links in the background at the far right end of the tabs bar for later viewing (Firefox 2 method). Closing articles when finished and you can check the Back/Forward arrows to be sure you have nothing back or forward in a tab before closing it.
    '''The other is to keep interrupting what you are reading''', by opening into a new tab in the foreground and reading that before continuing where you left off (Firefox 3). As with the other method, closing articles when finished and you can check the Back/Forward arrows to be sure you have nothing back or forward in a tab before closing it.
    You can read about setting up opening tabs at the far right as in Firefox 2, or opening tabs next to the parent article as in Firefox 3. The Firefox 3 method is going to present problems no matter how you work it, when dealing with sub articles next to the parent or to that of an offspring.
    You can read more about opening tabs and [http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm#taborder Order of Tabs in Tabs Bar -- Tests].
    Just want to make sure this question was not based on there being no drop-down on the Back/Forward toolbar buttons -- you now use right-click to provide you with the same list as before old stuff on button, new stuff on top (limit of seeing 15 items in list at a time).
    You can make '''Firefox 5.0''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0, or 4.0.1, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
    A page on helping you with Research and Documentation:
    :http://kb.mozillazine.org/Tools_for_copying_text_and_other_content_from_web_pages

  • I have lost all my bookmarks and screen short cuts since the outside telstra cable was damaged and repaired. How can I get them back?

    my internet had been running slowly with lots of fizz and crackle on the line. Telstra came and fixed it, necessitating my having to reset the modem. At first boot up after that, all screen short cuts were gone and all bookmarks were gone. Can I get them back? Help!!

    Hello,
    Please confirm that the problem you faced was this
    #You had an issue with our Internet access
    #Telstra fixed the issue and restarted your modem
    #Now in Firefox you are unable to view your bookmarks
    Is that the issue? If so, it is unlikely that a connectivity issue has caused this problem. Also, can you please confirm if you have enabled Firefox Sync?
    Thank you

  • Web ADI Create Document - Short Cut Save to Form  Function Grayed Out

    How do I "ungray" Save to Form Function to allow a save?
    RDBMS 10.2.0.4.0
    Apps 11.5.10.2
    Only GL and Desktop ADI
    Oracle on Demand Customer - does not give us SysAdmin Responsiblities
    We have:
    Applicatin Adiministrator does not have Application> Funcitons
    Application Developer has Application>Forms and Function
    Setup Web ADI super user menu with Create Documents, Define Layout, Define Mapping, Manage Documents
    Setup options and "Hidden" Enter Journals
    Thanks for you help,
    Dale

    I still have no response or answers
    Refer the section "Creating Form Functions Using the Create Document Page Flow" in Oracle Web Applications Desktop Integrator Implementation and Administration Guide. User to have system administrator responsibility assigned to have this feature enabled as this is a SysAdmin task.
    THE BIG QUESTION - since "Oracle on Demand" will not allow their users to have System Administrator, how can I add the required functionality to the supplied Application Administrator and resolve the questions below?
    Problem Description:
    Web ADI – Create Document, Save to Form Function is grayed out, therefore it can not be used
    1. How do we enable Web ADI functionality to Create document and Save to Form Function?
    2. Once saved to form function how to we navigate to Application>Functions?
    3. Once the Short cut is saved to the Form Function, how do we attach to a user’s responsibility?
    We have only Application Administrator with no Applications> Functions menu, however we do have in our test instance Application Developer with Applications>Forms and Functions, but it does not appear to have the same rights as SysAdmin. I tried adding the menu functions simular to SysAdmin to Application Administrator but no luck unlocking (ungraying) the form.

  • Can file adapter read file link/short cut

    All,
    I have a requirement for following use case
    Can file adapter read a file-link (basically a short-cut to a file in a folder) and check if the file exists at the path referred to in the short-cut.
    Thanks,
    Praveen

    Hi
    symbolic link did not work
    polling folder - "/tmp/filepoll"
    soft link - "/tmp/filepolllink" ponits to above folder
    my OS is Sun Solaris
    error in opmn.log
    <2010-03-24 07:46:55,023> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
    <2010-03-24 07:46:55,025> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11001
    Invalid Input Directory.
    The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "/tmp/filepolllink".
    Ensure that the following conditions are satisfied for the input directory :
    1) It exists and is a directory (not a file). and
    2) It is readable (file read permissions). and
    3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
    4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.
    Thanks,
    Praveen

  • Because you do not leave a short cut for old versions in the sites? Do not understand that the updating can bring us unpleasant surprises and perhaps it be necessary to do a downgrade of version?

    New versions not always work for all. Put in Your sites, '''CLEAR''' and '''of QUITE VISIBLE form''', a '''short cut''' for the '''old versions'''.

    Please be aware that anything except Firefox 10.0 and Firefox 3.6.26 don't have the latest security fixes, and Mozilla really doesn't want any other version to be downloaded. That is why Mozilla doesn't provide links to download any other version.
    You can get Firefox 3.6.26 from here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Safari Screen Short Cuts not working in OS4

    Since updating to OS4 on my 3Gs my safari short cuts that I added to my home screen won't open. I tried adding a new one and that won't open either. Any suggestions on how to resolve this? I like having them at my finger tips.

    I have an iPhone 4 with current iOS.
    I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
    Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
    In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
    Just wondering if this common among iPhone 4 users.

  • Type size short cut not working in CS6

    Hello everyone.
    I've recently upgraded to CS6 and the up and down arrows in the type size box are greyed out and unclickable.
    Does anybody know why this is so?
    Many thanks!

    I have an iPhone 4 with current iOS.
    I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
    Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
    In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
    Just wondering if this common among iPhone 4 users.

  • Short cut change icon is disabled and icons are generic

    (I am not sure if this is correct forum, I don't know if this is for Visual Studio Setup Installation projects or for Installing Visual Studio itself)
    I've created a Setup/Installation project for a WPF .NET 4.5.2 application and everything works fine with the exception of the program Icons.
    After I run the Setup - the short cut on the Desktop and Start menu (Win 7 and Win 8.1) shows generic Icon and when I right click and select properties the Open File Location and the Change Icon buttons are disabled, but if I click on the short cut it runs
    the program.
    In the Setup project I specified which icon to use from the exe program and I even added an icon do the project and pointed to this icon, but the icons still show up as generic.
    Any advise on how to fix this?
    Thank You
    Peter

    Hi pczurak,
    By reseraching, I found this thread in StackOverFlow has the same issue with you.
    http://stackoverflow.com/questions/2041291/how-to-change-windows-applicatoins-default-icon-in-setup-project?answertab=active#tab-top
    From the answer, we could show up the desired icon in the following way.
    right-click on the Deployment Project
    pick menu item View > File System
    in the File System window, find the shortuct whose icon you want to change (for example, under "Users's Programs Menu")
    go to the shortcut Properties (right-click and pick "Properties Window")
    go to Icon
    Browse...
    change "Files of type" to *.exe
    browse to and select your "primary output"
    OK, OK
    And you could also change the icon in the Control Panel's "Add or Remove Programs" list.
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for