Required code on to find out mfcc in speech recognition
Hi frenzs
I'm doing my acdemic project in speech recognition. so i have to find out mfcc for a wav file. so please send me the code.
my id [email protected]
Thanks
Anjali
sabre150 wrote:
By publishing your email address ( [email protected] ) you are inviting a load of spam. I never publish an email address such as [email protected] since some search engines harvest them.
whatever he said ;-)
Similar Messages
-
Wat is the Transaction Code to find out the Pending Training List
Hello Gurus,
Please let me know the Transaction Code how to find out the pending training list in Training Module in SAP-HR.
Kindly give me the Transaction Code or the report name.
Regards
AM.Hi,
What do you mean by pending traing list.
Regards,
Kapil Kaushal -
How to find out the user Country code in flex
Hi all,
I want to find out the country code, to load dynamic localization swfs.
example : my swf file name
en_US_res.swf
by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
Thanks!!Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
My son's ipod is asking for the code to remove the parental restrictions, I am the parent and i don't remember putting in any restriction code. Any idea how to find out what it is?
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3:
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
How do I find out what the restrictions pass code is
My son is trying to purchase some additions to a game but when accessing the App Store he is asked for the restriction pass code. However we don't recall setting one up for him and he hasn't been asked for this before. Why? How do we find out what it is? This is since upgrading to version 5.1.
If you restricted in-app-purchases in Settings/General/Restrictions, and you don't remember the restriction code anymore to disable the restrictions, you'll have to set up the iPod as new device again, without using the latest backup, the restriction code is part of the backup and can't be changed by restoring the device from a backup that has been taken after the code has been set.
How to back up your data and set up as a new device
If there are no restrictions set, the code he is asking for is the iTunes ID password, to be able to purchase and download. If you have forgotten that one, follow this article to reset it:
iTunes Store: Retrieving and changing passwords -
How to find out where used list of Table or T-code
Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PMHi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri -
How to find out which cube/ods has the code
hi,
I want to find out which cube/ods has the start routine/update rules written in it. Is there a table or Tcode to find out the code instead of opening each cube/ods to find out whether there is code in it or not.
Thanks,
Samhi Sam,
take a look
/message/3483792#3483792 [original link is broken]
try RSTRAN, field STARTROUTINE
related tables
RSAROUT
RSAABAP
RSAABAPINV
RSAROUTT
Technical name of start routine
Re: How to get info about a GP* program?
Re: Search for start, update rule, etc. that uses infoobject
if couldnt find out, you can use ST05 'sql trace', open 2 session, one for create start routine, and one for ST05, activate with option 'sql trace', then create start routine and 'deactivate trace' and 'display trace', and check out the tables list
hope this helps. -
How to find out user exits of t-code va03
hi all
how to find out user exits of any t-code .
regards
deepakHi Deepak,
<b>Try this code.</b>
*& Report Z_USEREXIT *
REPORT Z_USEREXIT
NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
<b>plz reward points if helpful or if it solves ur query.</b>
Thanks
Chinmay -
How to find out if a user is disabled in xpress code?
I have an active sync form and I'm trying to determine as one of my checks if a user is disabled. I've tried using waveset.disabled, but that always returns null. I also tried waveset.organization to see if the user is in the 'terminate' organization, but it only always returns 'Top' and not 'Top:Terminate'
Any ideas how I can find out if a user account is disabled?
Thanks for any info!Hi,
These two attributes you can only get in userview.
waveset.disabled (this is always null if user is not disble else return true if user is disble)
waveset.organization (will give you the whole org path like Top:xyz)
take a dump of your userview and see what you are getting there.
Use below code in you form/WF to see the userview on console
<block trace='true'>
<invoke name='toXml'>
<ref>userview</ref> // user your userview object name
</invoke>
</block> -
How find out which user is using which company code?
Hi Gurus,
I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
Is it possible to get it from a single table or Tcode?
Best Regards,
RahmanHi,
Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
Regards,
Rahman -
How to find out company code from a plant ?
Hello friends,
I have to modify a program that uses FM "BAPI_COMPANYCODE_GET_PERIOD". For that, we have to export company code ID. Currently it is hard coded with one company code. Now we want to make this program usable by all company codes. So instead of hard coding, I would like to dynamically find out company code based on the plant. So I want to know - how to find out company code from a plant ? Is there any table that has plant to company-code assignment data, or any other FM/BAPI to get this info ?
Thanks,
- Chetanhi
u can find this from table T001K
or just goto EC01
here click on STRUCTURE>NAVIGATION
double click on co code u will get the list
u can slo try this in EC02
regards
kunal -
How to find out what t-code(s) a user executes most?
Can anybody tell me how I can find out what transaction(s) a given user executes most from the all the transactions that given user has access to? For example if a user has access to 100 t-codes, but only uses 10 of them then, how can I find out that the user never executes rest of the 90 t-codes? Is there a report I can run to find out. Please help.
Hi Amit,
STAD is giving me nothing, even though I chose the date 05/03/2007. I also selected both radio buttons at the bottom. Here's message I am getting "No statistical record for any server found with given criteria"
Regards,
Chandu -
How to find out the idoc type required for our requirement
Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
PrasannaHi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A -
How to find out the Release date & Release code of PO's ?
Dear All,
Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
Regards,HI All,
Thanks a lot for your response.
In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
Hope my query is clear.
Thanks & Regards, -
How to find out the T-code of a program
Hi Experts,
I want to find out the T-codes of some programs. For that I am passing the program name in TSTC table and I am getting the T-code.
But TSTC table gives T-code for only main program and not for the includes. Is there any way to find out the T-codes for include programs also?
Thanks and regards,
VenkatHi,
there wont be tcodes for include programs....
u can find the tcode for a running program through Menu->system->status (now a window opens,here u can see transaction ie.,tcode).
Also when the program is not running,take se80 and put the program name,in the tree u can see the transaction attached.
Regards
Sajid
Maybe you are looking for
-
Introduction to regular expressions ...
I'm well aware that there are already some articles on that topic, some people asked me to share some of my knowledge on this topic. Please take a look at this first part and let me know if you find this useful. If yes, I'm going to continue on writi
-
Regarding Customer Total Sales table
Hi All SAP Experts I like to know which table will provide me total of each customers for year. an Actual sales for per customer. I know table VBAK with filed Net value. My question is that figure is right figure for each customer. I am looking for t
-
Hi, I'm a newbie to JMF and how to handle media file stream over RTP. What I need to do now is to receive a media stream from RTP, then play it and save it to a file at the same time. I have read throught the example and explanation on the Java Sun w
-
If I zoom with the mouse scroll "alt scroll" then press the down arrow it opens my file menu, this is 100% reproducable. Zoom any other way will not open the menu. I have searched the shortcuts and can not find any shortcut associated with opening th
-
Hi, Is it possible for EM to send a mail when some oracle errors occure EM 10gR4