Required Customizing for Quotations in WCEM 3.0 SP1

Hi all,
We customized quotations in CRM and are able to create quotations in CRM WUI for the respective sales org.
These are not visible in the Webshop but in module "sales transaction" quotations are enabled.
Any hints?
Thanks in advance,
Meikel

Hi Andreas,
Yes we did. We created a new tx type based on "AG" --> "YAG" and assigned it to the sales org in crm. We now can created quotations based on it.
Then I tried both variants in WCB.
1. Activated "Enable Quotations"
2. Activated "Enable Quotations" + " Enable Requests for Quotations" + Assigned "YAG" as ty type. 
Both cases didn't work. Neither search for quotations nor request quotation functionality works.
Any more hints?
Cheers Meikel

Similar Messages

  • Requirement for Quotation Report.

    Dear Experts,
    I have a requirement for Report for Quotation.
    In the Report Client wants to see for Particular Quotation Inquiry Number, Inquiry Value, Sales Order and Sales Order Value.
    I  have checked in VBFA Table if the Sales Order is Open for that Quotation it doesnt gets updated in the VBFA Table.
    Is there any other way I could capture the Sales Order Number for that particular Quotation.
    Please suggest the way out.
    Thanks.
    Parag.

    Hi,
    The logic would be
    Give the input value as quotation number.
    Pass quotation number into VBAK- VBELN and get VBAK-VGBEL to get  Inquiry number
    Pass quotaion number into  VBAK-VGBEL  and get  VBAK- VBELN  Sale order  number
    subsequently pass these Inquiry and quotation numbers and get the relevant details of Inquiry and Quaotation
    check this logic using t.code:SE16n
    Hope this helps.
    Regards,
    Sharan

  • Extraction for Cube 0PM_C05 requires customizing of table T_PMC05

    Hi can any body tell how to solve this error.
    Extraction for Cube 0PM_C05 requires customizing of table T_PMC05.
    Iam loading data to 0PM_C05 CUBE which has a datasource 0PM_PRM_PLCS_1 which is displaying as errors in source systems.
    This is a plant maintenence cube and ia replicated the datasource agian in BI Production and it is active.
    Edited by: manukonda anil kumar on Feb 17, 2011 5:45 AM

    Hi syed
                 Take the help of an ABAP person.
                 There will be same table resembling the name .
    So the data needs to be updated in the corresponding table .
    When the core people are updating data from different palnts and sites accross.
    In my case i haven't moved further.
    This is a configuration change form R/3 side where the data had to be fetched in the orrect table .
    Regards
    Anil .

  • Pricing Procedure for Quotation

    I have a requirement that my customized pricing procedure for PO should also be the same for Quotation. How can I assign my customized pricing procedure for Quotations.
    Please suggest if there is any solution for this?

    hi,
    At first go to M/06,
    Select the condition type which you want in your document...
    go into details..
    Here under pricing procedure enter RM0002 for the condition type which you wanna add...
    Also you have to maintained all other settings well which are general settings req. for Pricing Procedure..check those as well...ie. for access seq., cal. schema, sch. group etc...
    Regards
    Priyanka.P

  • Restrict to a customer for limited quantity

    Dear All,
    My requirement is to restrict my customer for limited quantity i.e. "10"
    Customer A can get maximum 10 quantity in multiple order , Reference of Quotation and Contract is not possible due to current process .
    Can you help me out this without any Z configuration at order level .
    Regards Ajit

    Hi there,
    Check if you can maintain something in customer material info record. In 0VLP, you will maintain a setting which will look for over delivery quantity & sends a message if it exceeds that.
    For each delivery item category, you can specify whether the system checks for overdelivery and, if so, whether you receive a warning or error during delivery processing. If you have specified an overdelivery limit in the sales order or in the customer-material info record, you can use this indicator to control how the system reacts.
    Regards,
    Sivanand.

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

  • Error: Field Pmnt terms is a required field for G/L account

    Hi Experts....
    When I am trying to release the billing document no in VF02
    It gives me an error
    Field Pmnt terms is a required field for G/L account
    This error comes only when payments are made through Credit Card....
    Message F5808.
    when I did a debug on this the field freigabe is made 'X'
    and I hve cleared the value..Now it saves but the accounting document is not created.
    We are in 4.7C version..
    Can any one help me out in this issue....
    Thanks for your help....
    Regards,
    Chaitanya

    Hi Friends,
    Please refer SAP OSS Note 119047.
    In the OSS Note they have mentioned..
    Pass the payment terms to the field
    xaccit-zterm = '0001'. in the User Exit.
    Program : LV60BF0C,
    Customer Function '002'.
    Include File ZXVVFU02.
    SE 37:- EXIT_SAPLV60B_002
    Still I don't understand why SAP doesn't support payment terms for Credit Card. But when a Sales Order is  created without credit card the field xaccit-zterm  has a value.
    Thanks,
    Chaitanya K

  • Free goods determination for quotation

    Hi  Experts,
    I have a requirement to implement free goods for a quotation .
    SAP has provided this facility to Sales order not for quotation.
    If i want to implement same free goods determination in quotation how can I achieve this.
    Could anybody help me.
    Thanks in advance
    Regards
    Anish,

    Hello,
    Free goods are only supported for sales orders with document category C (Orders).
    As you know the document category for Inquiry is A and quotation is B. So it will not work for them.
    Prase

  • Finding free goods for Quotation

    Hi Experts,
    I have requirement to determine free goods for perticuler product when you enter in quotation line item
    We hv standard sap option for sales order that will determine free goods in sales order.
    Can we do the same for quotation if so how can I achive this?
    Thanks
    Anish

    Hi
    Std SAP itself doesnt support Free Goods at quotation level
    Standard SAP supports Free Goods at quotation level and hence the item categories AFNN and AGNN are provided in the standard SAP. But,  the Automatic determination of Free Goods is not possible for SD documents under category other than 'C'.
    In your scenario...since the automatic determination is not possible, think about handling the functionality manually or through user exits.
    Thanks,
    Ravi

  • Print automatically a request for quotation and purchase order

    hI,
    I create a new message ZNEU and I link a new form.
    I want the system creates automatically the message ZNEU when I save my request for quotation.
    In transaction NACE, I specify the output type ZNEU
    My Access sequence is 0001   DocType/PurchOrg/Vendor
    I specify a procedure RMBEA1 Purchasing RFQ
    Then I put in step 10 the condition type ZNEU and a requirement 101
    I just copy the message NEU in ZNEU.
    And in condition record ( tcode MN02)  I create the output type with combinaison purchasing output determintation document type.
    With all these datas I haven't anything when I save the RFQ?
    I have the same problem with purchase order.
    Anybody have an idea?
    Thanks a lot for your help
    Kari

    Hi,
    For RFQ create outut condition using MN01 transaction give your output tpe ZNEU and choose the option doc type as AN and give your purchase group.give transmission medium 1 and time 4.In communication method give printer name and tick print immediately and save.Then while creating RFQ for that purchase group message will come automatically.
    For PO create output condition using MN04 transaction and document type is EF.Repeat the same like RFQ.
    Hope it will solve your issue.

  • Requirement Specification for a SharePoint Project

    I need to learn about developing in SharePoint and do you guys have a requirement specification that I can use it to create a customized SP solution?
    It is difficult to be creative in order to create a requirement specification for a home made SP project. The purpose is to improve my skills in SharePoint development.

    Hi
    Sakura Data ,
    SharePoint 2013 will support this classic model well-known to all SharePoint developers. SharePoint Solutions are still considered a good option, and in some cases the only option, for customizing SharePoint.
    SharePoint Solutions can be developed using Visual Studio 2012, which includes a number of supported templates. They can integrate with external applications using Business Connectivity Services (BCS), Web
    Services, or a custom Service Application. There are two types of SharePoint Solutions: Farm Solutions and Sandboxed Solutions.
    For developing SharePoint Solutions, you can refer to the article:
    Developing SharePoint Solutions
    Reference:http://blog.credera.com/technology-insights/microsoft-solutions/sharepoint-2013-development-solutions-vs-apps/
    Cambridgeshire Constabulary Constabulary Lowers Costs, Increases
    Public Safety with Enhanced Collaboration
    ASB Bank Bank Innovates Work Environment, Boosts Performance
    with Social Collaboration
    Kentucky Community and Technical College System College System
    Brings Its Organizations Together with Line-of-Business Integration
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Catalog Interface (OCI) -  Customizing for Plant Maintenance order  ERP2005

    Hello Experts,
    we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
    'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
    However I can`t find this IMG activities in our ERP2005 system.
    What`s wrong?
    Thanks in advance.
    Regards
    U. Wieland

    Hi! Additional we had to generate the img new.
    Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
    Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
    Plant Maintenance and Customer Service
    ->Maintenance and Service Processing
    ->Maintenacne and Service Oders
    ->Interface for Procurement Using Catalogs (OCI)

  • Blocking a particular customer for immediate delivery creation

    Hi All,
    I have the following requirement
    Right now whenever the sales orders comes from the customers through EDI, the deliveries were created immediately. This was set up through the sales document. This is being used for the document KE.
    Now we need to stop this immediate delivery creation for a particular customer when orders come through EDI.
    We can not do this by blocking the customer for deliveries(VD05) because this will block all the sales documents for deliveries. We need this to happen only for KE.
    We cannot remove the immediate delivery creation set up from the sales document(KE) because this will affect all the customers(for other customers this should create immediate delivery).
    I feel this has to be controlled through a user exit.
    In that case what should be the logic used?
    What should be checked before blocking the delivery for a particular customer?
    Please advise on this.
    Thanks in advance for your help.

    Harini,
    I am sure you do not want to take the route of achieving this by u2018Userexitu2019
    Here is the alternate solution by simple customizing.
    You need to do it in two steps:
    Step 1:  Define reasons for Blocking the delivery
    IMG > Logistics Execution > Shipping > Deliveries > Define Reasons for Blocking in Shipping
    Select :  Deliveries: Blocking Reasons/Criteria 
    u2022  Define a blocking reason : say  ZZ u2013 delivery Hold.
    u2022  Check  the Order check box
    u2022  Save
    Select:  Delivery Blocks
    u2022   Assign  SO to Delivery ( I guess KE to whatever delivery type you have configured)
    STEP 2:
    Go to Customer Master record for whom you want to block them for normal process:
    XD02 > enter customer master in change mode.
    Select u2018Extrasu2019 tab in main menu
    You see u201C sales and Distribution blocksu201D
    Under this click on  delivery block ( for  All sales areas or desired sales area)
    You will find the reason for blocking (ZZ)  you created in STEP 1
    Assignu2019 ZZu2019  to this customer and save.
    Thatu2019s itu2026u2026 !!!!!
    When  a sales order received with this customer through your EDI, the order will be blocked for delivery.
    One need to release the order manually by releasing this block
    VA02 >  sales tab : remove the block from the delivery block
    Hope this helps.

  • Finding brand penetration per customer for sales representative

    Material-Brand-----Sales-Rep----Customer
    GW--XYZ--
    Super-Cuts
    SE--XYZ--
    Super-Cuts
    GW--XYZ--
    Super-Cuts
    SE--ABC--
    Scissors
    GW--ABC--
    Scissors
    Wella--ABC--
    Scissors
    Wella--XYZ--
    Colors-and-Cuts-Salon
    GW--XYZ--
    Colors-and-Cuts-Salon
    SE--XYZ--
    Colors-and-Cuts-Salon
    SE--ABC--
    Planet-Beuty
    Wella--ABC--
    Planet-Beuty
    Kadus--ABC--
    Planet-Beuty
    Clariol--ABC--
    Planet-Beuty
    SE--ABC--
    Planet-Beuty
    Clariol--ABC--
    Planet-Beuty
    Wella--XYZ--
    Colors-and-Cuts-Salon
    GW--XYZ--
    Colors-and-Cuts-Salon
    SE--XYZ--
    Colors-and-Cuts-Salon
    Clariol--XYZ--
    Colors-and-Cuts-Salon
    the requirement is to find the brand penetration which
    is defined as  average no of brands per customer for a sales representative.
    in the above case XYZ is having two customer super cuts and color and salon
    XYZ----
    Brand pentration
    Super-Cuts--     2--(NO-OF-DIFFERENT-BRAND)
    Color-and-Cuts-Salon----
    4
    Average-Brand-Penetration-per-Account----
    3
    ABC----
    Brand-Penetration
    Planet-Beauty--4--(NO-OF-DIFFERENT-BRAND)
    Scissors----
    3
    Average-Brand-Penetration-per-Account----
    3.5
    THE REPORT LAYOUT SHOULD BE
    SALES-REP-----BRAND-PENTRATION
    XYZ----
    3
    ABC----
    3.5
    HOW  this requirement can be achieved in bex 3.5?
    Edited by: Omprakash Mishra on Jun 27, 2008 5:53 AM

    Hi praveen,
                     Actually this is much complex report .
                     there are many other complex key figures along with it .
                     i have just published a part of it as i am unable to find solution for it.
                     it is just an example so that people can understand it easily.

  • URGENT - XI to SRM : Interface for 'Request For Quotation'

    Hello Guyz!...
    I am trying to develop an interface in XI to post 'Request For Quotation' into SRM system. Can anybody help me on this.. Any kind of help is greatly appreciated. Thanks in Advance.

    Hi Praveen,
    No need to create a new inbound interface for posting the RFQ in SRM. You can use the SAP predefined inbound interface "RequestForQuotationResponse_CreateOrChange_In" present in the name space "http://sap.com/xi/EBP". Also it will have a corresponding proxy in SRM side which will call a stard function module.
    All you need to do here is create DT, MT, MI required for source and do the mapping.
    Regards,
    Jai Shankar.

Maybe you are looking for