Required Docs on LSMW

Hi all,
Can anyone please share some documents on LSMW.

Please go through the below link below. You can search in Google as well.
[www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc]
Regards,
Shan

Similar Messages

Step by Step Docs of LSMW

Hi..
wud appreciate if sum1 cud send me step by step doc of LSMW for various examples...
i already hav for "LSMW to Update Customer Master Records with Transaction Recording &
"LSMW to Update Customer Master Records with Standard Object...
other than tht wud be appreciated..
[email protected]
Regards,
Vishal

just check it is sufficient.....
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
and Iam giving the 13 steps document bellow
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:\material_data.txt"
description : -
separators as select comma radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
select the Program
select continue button
go with via physical file
give the lock mode as 'E'
and execute

I want a doc about LSMW steps for HR,PLZ help me!

hi everyone:
Can anyone pls send me a doc with LSMW steps regarding some HR function/project (as an example) for which I would be more than grateful.
thanks!
Message was edited by:
Zsolt Markus

Hi 4K!
I hope you already know the rules of SDN -
> no private mailing, knowledge sharing platforms are Forums, Blogs, Articles, etc...
Please do not use your e-mail.
I have deleted them from your question.
Best regards,
Zsolt

Require Doc Formats Related to Integration

Hai All,
I want prepare Functional and Technical spec. So that
I require some documents formats like Scope,Functional
Speficiation , Technical Specificatiosn or any documents
related to Integration using XI. If you people send to
this id [email protected] then it is very helpful
for me.
regards,
Ansar.

hi Ansar,
download this file
https://websmp101.sap-ag.de/~sapidb/011000358700004874282004E
and search for *.doc , *.xls and you'll find all you need
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Required doc for using ST12 Transaction

hi,
Can anyone please provide some document or step by step procedure on , how to use the ST12 Transaction for performace tuning.
Thanks in advance,
Thanks,
Sharad

Hello,
Did you search "ST12" on SDN?
Because the first result when I did it two minutes ago pointed to this wiki:
[Single Transaction Analysis (ST12)|http://wiki.sdn.sap.com/wiki/display/ABAP/SingleTransactionAnalysis+%28ST12%29]
This wiki is refering to Note 755977 - ST12 "ABAP Trace for SAP EarlyWatch/GoingLive".
So if you already read all this, may you please tell us what you are looking for in more details?
Thanks and regards,
Nicolas Busson.

LSMW with bapi BAPI_REQUISITION_CREATE

Hi
I'm creating an LSMW for create purchase requisition with Bapi (BAPI_REQUISITION_CREATE)
I'm trying to upload 2 items for a PR but the LSMW is creating 2 PR with each item.
How can I tell to the LSMW that I have to item for the same PR?
Remember this bapi doesn't has header.

Hi,
you need to define hierarchy in your in put file to merge required lines into one BAPI call. You can find some examples how to create order with multiple items (for example [this one|http://www.scribd.com/doc/6646673/Lsmw-With-Bapi]). So you can easily adapt it to your BAPI.
Cheers

LSMW procedure for PP master data

Hi
i have some doubts regarding LSMW .... can we upload PP master data BOM,Resource,MasterRecipe and Production versios through LSMW. could u pls guide me in this issue.
Regards
hgvd

Hgvd,
You will create the procedures. I have never seen detailed procedures published for all possible LSMW scenarios, probably because, they are always different for each project..
Every Data requirement is different, based upon the business requirements. The LSMW project concept is pretty intuitive, so even without much training, a novice can create data upload functionality. Read the docs previously quoted in this thread, and if you want more detail, try the old online word doc at
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000455036&_SCENARIO=01100035870000000112&_OBJECT=011000358700000728862003E
Although this doc is for an old version of LSMW, it is particularly useful for a novice, since it contains so much detail. There is some added functionality is later versions of LSMW, but for the objects you have mentioned, this doc should suffice.
Best Regards,
DB49

How to Delete TASK and employee retationship (B049) in HRP1001 Using LSMW .

Hi,
Please help me on below requirement.
In LSMW Transaction: PP02 is not supporting to delete the records from Table HRP1001 using task .
Input file we have below details.
Employee number
Task ID :
Relationship ( b049).
Is there any other way to delete the required records from HRP1001 using LSMW process?
Thanks & Regards,
Naresh Chava.

Hi Naresh,
I am not sure about the possibility of delete the records.If you are able to do in standard transaction then you can do the same with lsmw.Create a recording method to delete the records and this delete it.
Regards,
Madhu.

Doubt in creation of LSMW

Hi experts,
We have a requirements where the LSMW for infotype 22 should be run for a PERNR only if IT-0001 and IT-0002 are maintained. How to do this?
Remember the requirement is only for LSMW and not a BDC.

Hi,
You can put your ABAP code to validate at different levels such as:
__BEGIN_OF_PROCESSING__
__BEGIN_OF_TRANSACTION__
__END_OF_TRANSACTION__
__END_OF_PROCESSING__
To enable this, in the Field Mapping step of LSMW, choose "Extras" -> "Display Variant" & tick all the check boxes. After this step you see the above processing points. Double click on the Processing point to get the ABAP editor & put your validation as per reqmt.
Hope this helps.
Best Regards, Murugesh

Associating requirements in my Word Document with NI Gateway

What do I need to do in order to associate
requirements in my Word Document with NI Gateway? I have created a MS
Word Style defined as Requirement_ID and Requirement_Text and applied
them to their respective parts of the document but when I load the
document in NI Gateway I get no response.

jstrong -
You could customize the Word NIRG Type to add a new Requirement element which uses a regular expression to parse Table information.
When you include requirements in a Table, NIRG parses that information into the intermediate file in the form of |d Requirement_ID REQX: blah, where "|" specifies the beginning of a new cell in the row and d specifies the cell number.
Please take a look at the attached project which is a modification of the NIRG Word example. You'll notice that I use a custome Type called Word1 to load the Word Example - Requirements.doc file.
Hope this helps!
Manooch H.
National Instruments
Attachments:
Word.zip ‏44 KB

How to use table control in LSMW

Hello All,
I have requirement to use LSMW , in my using transaction have table control ,I need to pass values in table control . how to use table control in LSMW .Can any one give me the solution for this.
Best regards,
Satya.

Note: The recording function records a fixed screen sequence. It cannot be used for migrating data containing a variable number of items or for transactions with dynamic screen sequences!
Tip: It is possible to create a recording via SHDB, generate a program out of this recording, and adopt the program to your needs and registrate the program to be able to use it in LSMW.
Thats means, for creation of project and WBS Elements is not possible through
1. LSMW-BDC (For both CJ01 and CJ20n)
2. LSMW-BAPI (Method: Maintain is not listed )
3. LSME-Standard Batch Direct Input.
Its possible through programmatically(SE38.) either using BAPI Or BDC.
Thanks,

How to develop an idoc related lsmw

hi all,
my name is t.balaji and i belong to sap sd and i dont know how to develop and i doc related lsmw.

hi balaji,
1. TCode: LSMW.
2. Enter Project name, sub project name and object name.
    Execute.
3. Maintain object attributes.
    Execute
    select Batch Input recording
    go to->recording overview
    create
    recording name.
    Enter transaction code.
    Start recording
    do recording as per ur choice.
    Save + back.
    Enter recording name in lsmw screen.
    Save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
    Here you have to enter the name of internal table.
    Display change
    create
    save + back
3. MAINTAIN SOURCE FIELDS.
    Display change
    select structure
    source_fields->copy fields.
    A dialogue window will come.
    Select -> from data file
    apply source fields
    enter No. of fields
    length of fields
    attach file
    save + back
4. MAINTAIN STRUCTURE RELATIONS
    display change
    save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
    display change
    click on source field, select exact field from structure and enter
    repeat these steps for all fields.
    Save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
    execute
    save + back
7. SPECIFY FILES.
    Display change
    click on legacy data
    attach flat file
    give description
    select tabulator
    enter
    save + back
8. ASSIGN FILE
    execute
    display change
    save + back
9. IMPORT DATA.
    Execute
    display change
    save + back
10. DISPLAY IMPORTED DATA
      enter ok, it will show records only.
      Back
11. CONVERT DATA
      execute
      display change
      save + back
12. DISPLAY CONVERTED DATA
      execute
      display change
      save + back
13. CREATE BATCH INPUT SESSION
      tick keep batch input folder
      F8
      back
14. RUN BATCH INPUT SESSION.
      SM35 will come
      Object name will be shown here
      select object & process
"Reward points if it helps"
Rajesh

Lockbox implementation doc.

Hi
I am suppose to implement the lockbox in my project. I have to to give a requirement document or design doc to the management. Can some one please send me any requirement doc,design doc etc related to Lockbox implementation ?
I promise to maintain the confidentailty of your document which may contain the client name etc.
Thanks in advance
satya
[email protected]

Hi Satya and all !
Mine is also the same situation, I have to prepare a design and requirements doc for Lock box config and I have to finish off my project with in one month. Could you or someone help me with the situation .
and send any docs u are having to my email id [email protected]
Thanks

HT4411 iLife '11 System requirements?

"Not readable by this computer" would tend to indicate the iLife '11 install DVD cannot be read on a Core2Duo iMac running OS 10.6.8.
Apple's support document <iLife: System requirements> ends with iLife '09, system requirements for '11 are nowhere to be found on Apple's iLife site/pages.
The iLife '11 box says: "Intel processor, 1GB RAM, 5GB disk space, DVD drive, 10.6.3 or later" then refers to the document above for more info.
A search of Apple's app store for "iLife" or "iLife '11" turns up no iLife and no iLife DVD, only individual iPhoto, iMovie and GarageBand:
iPhoto '11 requires 10.7.5 or later, no CPU specs.
iMovie '11 requires 10.7.4, no CPU specs.
Garage Band requires 10.6.8 or later (suggesting it's been abandoned), no CPU specs.
No iWeb, no iDVD..... and cannot download any of it from the app store anyway.
So why can't a machine with "Intel processor, 1GB RAM, 5GB disk space, DVD drive, 10.6.3 or later" even READ the install DVD in the box?
We went looking for iPhoto for OS 10.6.8 - like it says on the iLife DVD box - but apparently iPhoto version 8.1.2 is what we need. Was it part of iLife '09?

Thank you, Terence. Quite right, lots of changes, versions, Systems. Confusing as all get out! And the only thing worse than no information is wrong information. Would be nice to see that iLife requirements doc HT3876 get updated. Didn't stick around long enough to know which version of iPhoto I had, but it was wanting to update immediately.
Larry called it, was a bad DVD. My (family pack iLife '11) DVD installed perfectly on that Core2Duo/10.6.8. iMac. Defective DVD will have to go back to Amazon or wherever it came from. Too bad Apple refuses to sell anything that's more than a week old, gives rise to situations just like this one.
Thank you gentlemen!
Noooo! I did NOT just click my own 'solved' button, did I? I clicked Larry's! Dang! Undo! Undo!
Larry, I'm sorry, I can't fix it. You were RIGHT. I'm going back to a pad and pencil now....

Data Migrator and lsmw

hi
i want to know where i can find material on data migrator and lsma?
how it works?examples?
thanks
have a nice day

Hi balan,
Check this <a href="http://www.sap-img.com/sap-data-migration.htm">Link</a> for a few tips on the same..
also<a href="http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm">http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm</a>
Also check this step by step example..
<a href="http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm">Doc on LSMW</a>
regards
satesh

Required Docs on LSMW

Similar Messages

Maybe you are looking for