Required field, UPC, is missing. Please add UPC to the listing and retry the operation.

What to do about this: "Required field, UPC, is missing. Please add UPC to the listing and retry the operation." ? We sell cassette tapes and sometimes they are are of a vintage that predates upc codes.

forester_studios wrote:OK thanks for the input; but selecting 1 item leaves the other 4 or 5 unsearchable I would think. Seems like a typical ebay answer (which is not much better than no answer as far as problem solving goes). I have to wonder if ebay thought this new requirement through. Often upc codes on Canadian items are not in ebays system at all. So are these items which have upc codes un-listable since ebay does not acknowledge they exsist? In that case, here is what I intend to do.... List the most important item's UPC in the actual required UPC field and then create as many other 'custom' item specific UPC fields as are allowed. You need to be on the long form selling form to do it. Call them Other UPC and Even More UPC or something. And then, just to be sure, I'll list all the UPCs in the item description. Buyers probably won't search for UPC (unless they're standing in a retail store with their smartphone in hand and looking for cheaper pricing online) but search engines do. When I look for the products that I sell on google, I get amazon results 19 times before I see one from eBay. I'm certain that's the UPC talking there. We do need Product Identifiers on eBay. Implementing them is the difficulty. Ebay is aware that the UPC for Canadian packages may be different than the exact same in an American one. I've raised it and was told they were looking into it. Use the MPN identifiers too. Pretty much nothing I list can be found in the product catalogue on ebay.ca (is there one?) so I don't know what to expect for resolution there if and when the Catalogue version of the Product Identifiers are shown to be clearly wrong but I know it happens, here and elsewhere. The last order that I placed with Amazon had a new UPC pasted over an old, similar product. It was not what I ordered. Close but no cigar. Hopefully, when all of this becomes 'official' in two weeks, there will be a timely manner to address item misinformation within the Product Catalogue. In the meantime, I would state all the item properties in the Item Description area to cover my butt.

Similar Messages

This is what I get when I try to download my college text: This document requires global security policy to be disabled. Please go to Edit Preferences JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions

My college text is on my college website. When I try to download it this is what I get:
"This document requires global security policy to be disabled.
Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
Message code: 005"
Help

matermax wrote:
Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
And - did you?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Sign in problems- Please connect to the internet and retry

I originally installed the premier elements trial on my computer. shortly after a friend of mine purchased premier elements for me I have the codes and everything I verified the product several times and it has been working great as of recently i am getting the error message: Please connect to the internet and retry
Either your computer is offline or the clock on your computer is set incorrectly causing a connection error. an internet connection is required.
Internet is running fine on my computer and the clock was indeed set to the wrong time, i set the correct time it but it is still giving me issues not allowing me to login or use the program
additionally: why do i need to sign in to the internet every time i use the program if i already purchased it? shouldnt i be allowed to use the program even when there is no internet connection available? why is it asking me to sign in every time. what gives?
p.s. i had it installed on two previous computers. One of them i bought wasnt good and i wiped the drive before i returned it to the store.
the other computer is an old computer its still on there but im not using it because its too slow to run it.

kravmaguy
What version of Premiere Elements and on what computer operating system is it running.
Using Premiere Elements 12 on Windows 7 64 bit, I ran into the same Internet/Clock message and used the following solution to resolve that specific issue.
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
Please determine if it will work for you.
You need an Internet connection for product installation, for some first time/one time feature activation, and use of Online Services offered by the program. Other
than that you should be able to use the program without an Internet connection.
When you have been going to install Premiere Elements on any of your computers, are you getting a "same purchased serial number on more than 2 of your
computers" message? If not, then there should be no involvement needing contacting Adobe about the use of the same purchased activated serial number on more
than 2 of your computers.
Please review and consider and then let us know the outcome.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR
Add On...Just in case note...deactivation and uninstall are two different things...so Help Menu/Deactivate or Sign Out (depending on your version)
and, if necessary, then uninstall using the usual Control Panel route (if Windows).

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals.

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals. It went crash.

Hi,
In regarding of the issue, please provide us more information to assist you better.
Do you mind telling us the Excel version number? Like 15.0.XXXX.1000
Would you like to collect the Event Log and App Crash dump file to do further troubleshooting?
As far as I know, if Excel crashes when using Analysis ToolPack add-ins, it usually causes by the >>Faulting module name: mso.dll<<, Please try the following method and check if it is helpful:
1.Copy/paste the Mso.dll from another PC.
2.Click "Start" and "Computer."
3.Double-click "C: Drive," "Windows" and "System32." The System32 folder opens.
4.Drag the Mso.dll file on your desktop into the System32 folder.
5.Click "Start," type "cmd" into the search field and press "Enter" to open the Command Prompt.
6.Type "regsvr32 mso.dll" (without the quotation marks) into the Command Prompt and press "Enter."
7.Close the Command Prompt and restart your computer.
Then, if the Faulting module name is not MSO.Dll, you also can upload(Or send to us via email
[email protected]) the Event Log/App Crash dump file. We'd like to do further troubleshooting.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Invalid data has been used to update the list item. The field you are trying to update may be read only.

Trying to follow Serge Luca's Step by Step Tutorial. Creating Workflows for Windows Sharepoint Services and MOSS2007. http://sergeluca.spaces.live.com/blog/cns!E8A06D5F2F585013!859.entry
I have an onWorkflowActivated, followed by an ifElse condition and a log to history.
In the IfElse, each branch has a code segment, that trys to update the status column in the list that the workflow is attached to.
private void Authorize_ExecuteCode(object sender, EventArgs e)
// tried serveral methods
WorkflowProperties.Item["Status"] = "Automatically Approved";
// tried all of the following (one at a time)
item.update();
WorkflowProperties.Item.Update();
WorkflowProperties.Item.SystemUpdate();
//tried this as well.
Microsoft.SharePoint.SPListItem item = WorkflowProperties.Item;
item["Status"] = "Automatically Approved";
item.Update() ;
On the update call I keep getting "Invalid data has been used to update the list item. The field you are trying to update may be read only."
Could someone explain how to update "Status" column of the list item that the workflow is working on?
Thank you very much.
Bill

Hi:
you can do the following:
add the following code to the workflow.xml file (under the MetaData section)
Code Snippet
<ExtendedStatusColumnValues>
<StatusColumnValue>Branch1</StatusColumnValue>
<StatusColumnValue>Branch2</StatusColumnValue>
</ExtendedStatusColumnValues>
then add 2 SetState activities one in each branch of the IfElse.
for the code behind of setState1 (branch1) write the following code:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max);
for setState2 (branch2) write the following:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max) + 1;
where state is the variable assigned to the field State in the properties of the SetState(design lever), or instead of state u can use the following code:
Code Snippet
((SetState)sender).State
where sender is the object sent through the function parameter.
hope this answered your question
Best Regards

Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

Also there seems to be no obvious way to report Office bugs. This is leaving little room for improvement. Not sure if there has been any planning on this front???
For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead). But how do I communicate this to the Office team without knowing at least one of the team personally (which I
don't)???

Hi,
Do you have this issue when pasting in other programs?
If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
Regards,
Melon Chen
TechNet Community Support

Sign in problem. Please connect to the internet and retry.

After reinstalling Dreamweaver CS6 om my new windows 8 computer, I received an new serial number. So far so good. Now, when I want ro run the program a message pops up, wanting to me sign in.:
Please connect to the internet and retry.
Either your computer is ofline or the clock on your computer is set incorrectly, causing a connection error. An internet connection is required. Please connect to the internet or adjust your clock and try again. .....
As far as I know there is nothing wrong with my clock, and I am connected to the internet all the time.
Anyone an idea?

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

We deployed Acobat Standard XI on a closed domain and make it available to our customers as an App-V. Customers start the app, they are getting "Please connect to the Internet and retry". They are also getting, "Please connect to the internet. Activiat

We deployed Acrobat XI Standard on a closed domain (not connnected to the internet) and make it available to our customers as an App-V. When our customers run it, they are gettiing "Activation Required, Please connect ot the internet." Another thing they are getting is "Please connect to the Internet and retry". Is there a setting we can make to preclude this from happening?

Acrobat is not supported.
App-V Deployment — Enterprise Administration Guide
It will be sometime after the next major release (DC products).

How can I hide or make visible the fields at the order and at the delivery?

How can I hide or make visible the fields at the order and at the delivery?
Thanks in advance.

Hi,
For sales order, use user exit :
MV45AFZZ and FORM userexit_field_modification.
For deliveries, use BADI :
LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
Create implementation in ref to this badi with Tcode SE19.
Regards,
Lionel

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new c

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new computer?

You don't. Backup your itunes library on the old computer and move it to the new computer.

Invalid data has been used to update the list item. The field you are trying to update may be read only (Lookup Field).

Hi.
I am getting below error while adding value to look-up field.
Invalid data has been used to update the list item. The field you are trying to update may be read only.
I have tried many forums ans post but didn't come to know what's the root cause of issue. I am also posting Code for creating and adding lookup field.
CAML to create lookup field (It works Fine)
string lkproductNumber = "<Field Type='Lookup' DisplayName='Product Number' StaticName='ProductNumber' ReadOnly='FALSE' List='" + pNewMaster.Id + "' ShowField='Product_x0020_Number' />";
Code to insert value to lookup field
ClientContext client = new ClientContext(SiteUrl);
client.Load(client.Web);
client.Credentials = new NetworkCredential(this.UserName, this.Password, this.Domain);
// Lookup Lists
List pmList = client.Web.Lists.GetByTitle("Product_Master");
//List Conatining Lookup Columns
List piList = client.Web.Lists.GetByTitle("Product_Inventory");
client.Load(piList);
query.ViewXml = "<View/>";
ListItemCollection collection = pmList.GetItems(query);
client.Load(collection);
client.ExecuteQuery();
int prodid=0;
foreach (ListItem item in collection)
if (Convert.ToString(item["Product_x0020_Number"]) == ProductNumber)
{ prodid = Convert.ToInt32(item["ID"]); }
ListItem piItem = piList.AddItem(new ListItemCreationInformation());
piItem["Product_x0020_Number"] = new FieldLookupValue() { LookupId = prodid };
piItem.Update();
client.ExecuteQuery();
Exception Detail
Microsoft.SharePoint.Client.ServerException was caught
Message=Invalid data has been used to update the list item. The field you are trying to update may be read only.
Source=Microsoft.SharePoint.Client.Runtime
ServerErrorCode=-2147352571
ServerErrorTypeName=Microsoft.SharePoint.SPException
ServerStackTrace=""
StackTrace:
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at WebServiceProviders.ClientServices.NewProductInventory() in Z:\.............ClientServices.cs:line 889
InnerException:
Quick response is highly appreciated.
Thanks
Mehar

Try some thing like below,
your data value that needs to be update should be in this format "ID of the lookup";#"Title of the Lookup"
For example,
listItem["Product_x0020_Number"]
= "1;#iPhone";
listItem["Product_x0020_Number"]
= "2;#Mobile";
Hope this helped you....

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

Hi Bev076,
I would try these ideas first:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that doesn't resolve the situation, I would suggest reporting it:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Take care,
- Ari

I received an error "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened b4

i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened before. yesterday did the sofware update for maverick.

Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it).

Required field, UPC, is missing. Please add UPC to the listing and retry the operation.

Similar Messages

Maybe you are looking for