Required fonts for Bridge labels?
The attached screen shot explains it all. I keep my font library pared to a minimum, and I figure there is some font Bridge uses specifically for this area.
In case anyone is interested, here's what I've discovered.
There are four font families installed with Adobe CS2 that don't remain in the Library/Application Support/Adobe/Fonts folder. They are Courier, Myriad, Symbol, and ZWAdobeF. All are PostScript (Type1) fonts—except for ZWAdobeF, which is TrueType.
Couri
CouriBol
CouriBolObl
Courier
CouriObl
MyriaBol
MyriaBolta
Myriad
MyriaIta
MyriaRom
Symbo
Symbol
ZWAdobeF.TTF
Interestingly, these may be required fonts, but instead of remaining in the Requrd folder, they seem to be installed in the User font library. According to the Extensis publication Font Management in Mac OS X: Best Practices Guide (7th ed.), the font Myriad is required for CS2. Meanwhile, an Adobe forum posting by Dov Isaacs, an Adobe employee, indicates that ZWAdobeF is a special hack for Adobe Acrobat and serves a limited purpose but is best left untouched. The remaining fonts may or may not be crucial.
I'd lost track of the source of these fonts long ago and had no idea that they belonged to my Adobe applications. Although they'd remained in my User font library, several of them (Courier and Symbol) had recently been disabled—but not Myriad or ZWAdobeF. For the time being, I've decided to move them all back into the Requrd folder where they'll be activated for all relevant Adobe applications.
http://blogs.adobe.com/typblography/fonts-installed-by-adobes-creative-suite#CS2
http://www.extensis.com/en/font-management/fmbpg.jsp
http://forums.adobe.com/message/3996613
Similar Messages
-
Are there required fonts for Illustrator to run properly?
Are there required fonts for Illustrator to run properly?
Yes, there are. There's a problem related with missing Verdana (search for layers not displaing properly). And maybe others.
-
A lot of fonts are installed by Lion, for what I thank Apple but I really want to manage fonts myself and want to turn them on or off as needed (I use FontExplorer 3).
So – which fonts are required to run OS X Lion? Which fonts can be disabled? I know for instance that one of the Japanese/Chinese fonts is used to dusplay the rating stars in iTunes. Had it all setup but now a lot of fonts came installed with Lion. Can I dsiable the same ones as in Snow Leopard?Keep an eye on this site: Font Basics. They have provided great font info before on both Leopard and Snow Leopard. I feel info on Lion should be there to before too long.
What I've done meanwhile, is disabled all fonts actived with my font manager (FontCase). Then moved all fonts from the following folders to a folder on my desktop: /library/fonts and /users/home/library/fonts.(Be sure to leave /system/library/fonts alone for now!!)
I then imported the fonts I moved to my desktop into FontCase, cleaned font caches and restarted. After restart I actved my basic sets in FontCase again, and all's been working just fine.
Hope this helps! -
JWS has only 1 bold font for button label
The label on a button should be Monospaced and BOLD,
but it is always the same font (Dialog?) no matter
which font I have specified. The same program shown
as an applet by the browser is correct (shows different
fonts just as I have specified).
Plain fonts are shown correctly both by JWS and the
browser.
Monospaced-Bold is available in JWS as I can see from
another applet of mine.
PeterThe problem has got the bug id 4487363.
-
Required Fonts for iMovie 11?
I work in graphic design so usually only have a minimal set of fonts activated on my computer, so that I can activate what I need when working on customer jobs and then de-activate them later--keeps me from having hundreds of fonts active.
However, this means that when I use iMovie, I'm not sure but what some of the fonts used in the various themes are inactive. Was wondering if anyone knows of a list of fonts that iMovie uses?
Thanks in advance.Then you talk about "these 34 iMove fonts.
What I've found is that while there are 34 fonts in the application package, only 9 of them seem to be user accessible.
I've now edited my answer.
So it appears that any fonts that iMovie uses for its default themes and trailers are within the application itself. So your practice of moving system fonts in and out shouldn't be a problem for iMovie.
Matt -
After Effects cannot load required font!
After installing some new fonts I get the error message "After Effects cannot load required font for the AE interface. Please replace the font or reinstall AE." How can I fix this? Do I really have to reinstall AE? Someone please tell me that there is an easier way to fix this .
Thanks.
PedroThis bug is fixed in the After Effects CC (12.1) update:
http://adobe.ly/AE_CC_12dot1_details
Let us know how this works for when you've tried with the new update. -
Need to know where required fonts for Adobe CS5 are located... Library/Application Support/Adobe/FontsRequired/???
Have a look at this:
http://www.jklstudios.com/misc/osxfonts.html
Also there is is an ebook:
http://www.takecontrolbooks.com/leopard-fonts.html -
Is there any way to enlarge the font for the panels in Bridge?
Is there any way to enlarge the font for the panels in Bridge? Either CC or CS6?
To change the default message font, use UIManager: UIManager.put("OptionPane.messageFont",
new Font("Lucida Console", Font.PLAIN, 12)); Per-instance, use HTML: JOptionPane.showMessageDialog(
"<html><font face='Lucida Console'>Your message here</font></html>"); -
Using the font WIngdings for (J)Labels
Hello there,
I would like to use the font Wingdings for a Label, but when I do so it shows rectangles.
Could someone help me solve this problem?
hvdboornCheck if that font is available to you; do this:String[] fonts= GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames();... and print out all the available fonts.
kind regards,
Jos -
How do I change the font to bold for a label in a check box item
I am having no success with this and my internet searches throw me all over the place with no success. Can someone please explain how to change fonts for items in the most simple and basic terms. Thanks
Use HTML Form Element Attributes and type there something like style="font-weight:bold" or Form Element Option Attributes and class="fielddatabold". See my demo app for that:
https://apex.oracle.com/pls/apex/f?p=31517:1
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
My University is updating its 'Visual Identity Guidelines' and I am trying to find out the proper way to go about purchasing fonts for 'official' use and distribution to staff users across a large institution.
I see Volume Licensing for programmes but not for fonts. Can anyone advise?
Thanks in advanceTerriTea-
Our Volume Licening program provides for volume licensing of Font Folio 11.1 only. You are correct that we don't license individual fonts via this program.
However, we would be happy to quote you on a customized volume license for any specific fonts you want. Please respond to me directly below, indicating the total number of users, information about your institution, as well as the specific typefaces and weights you have interest in. I will see that the proper sales people respond to your query.
Thanks for reaching out to us,
Caleb
Caleb Belohlavek
Principal Product Manager • Type
Adobe Systems Incorporated
[email protected] -
Howto set default font for JLabel & JTextField in JClient?
Hi,
JDev 10.1.2
Can you please tell me how to set the default font for labels & textfields in JClient?
For some reason the proposed font is now "Microsoft sans serif", before it was "Tahoma".
I search the preferences all over and didn't found any clue.
I know you can change the font of the source editor.
I suppose the default font is taken from the OS environment, but where?
I intend to deploy to linux so a Microsoft font doesn't suit me.
I changed the style to bold for some labels and in this case the font parameter is part of the code.
Any help will be appreciated.
FredericHello
The defaults reached thru the Terminal are not storing infos about the font used as default one in a template.
I apologize but when I select all in a Numbers document and save it as a template, it doesn't match your requirements.
Each time I insert a new table it defaults to HelveticaNeue.
This is why I gave the tip which changes the font name in the Index.xml file.
From my iDisk:
<http://idisk.mac.com/koenigyvan-Public?view=web>
you may download:
:For_iWork:changeFont.zip
which gives you the ability to do the job very easily.
you may also download
For_iWork:removePrintRecord.zip
which removes the print Record embedded in our documents if this one is annoying.
Yvan KOENIG (from FRANCE vendredi 6 juin 2008 14:57:02) -
SAP Script : Control Commands for printing Label (barcode) by Zebra Printer
Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
RamasamyHI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN -
Embedding fonts in Bridge (Photoshop CS5)
Hi folks!
I'm sorry for posting but I still have trouble with creating PDF via Bridge.
I have sveral PSD-Files (CS5 made) using several image- and textlayers.
Now I want to create multipage-PDF using Bridge that comes with PS CS5.
Works fine so far but Bridge does not embed those fonts used in the PSD!
Seems to me Bridge just merges all layers to one pixelbased image and saves it in PDF-format.
But that's no good deal!
In CS2 there was a much better solution in PS2 allowing to create multipaged PDF with embedded fonts.
Is there any chance to embed fonts with Bridge?
Plz don't tell me to use Acrobat or InDesign because I'm only using PS CS5.
Thx!Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
Camera Raw plug-in | Supported cameras -
Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the MacBook Air? I need to be able to use a pop up window of fonts.
Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.
Maybe you are looking for
-
The situation: Whenever I go to use the address bar or the small search toolbar (which is set to google) in my window, the search engine used instead is "search.searchcompletion.com", which returns very shitty search results and is annoying. The thin
-
Some form of malicious content is assaulting my PC's registrys, drivers, along with portraying as other Users, and programs. It's a constant struggle to keep my property, authority, permission under my control over security ownership of my files etc.
-
I just subscribed to your service to convert a PDF document to Word. How do I use this tool to convert my PDF document?
-
Basing a Data Block on a Select Query
Hi Folks, I'm trying to create a data block in Forms 6i, based on a from clause query which I give in the Query Data Source Name Property of the data block, but when I run the form the fields are blank and even when I execute the unrestricted query f
-
Dear Sir/ Madem i have apple 3gs iphone last 2-3 days network problem suddenly in the morning phone not start