Required input on GUI for HTML vs Windows

Hi,
We are now on 7.02 and have seen that a required input field in SAP GUI for HTML is shown as an *, but on SAP GUI for Windows is shown as a checked box icon. Is there a way to make them the same? Our clients run reports in ECC and via the Portal and have complained of the inconsistency.
Thanks,
-Kevin

Hello Kevin,
you might want to ask this in , which is the forum which is about SAP GUI for Html. That forum is monitored by the resp. developers.
Best regards
Rolf-Martin

Similar Messages

  • Image not displaying properly for SAP GUI for HTML transaction iview

    Hi,
    We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
    When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
    I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
    regards
    Bharat.

    Hi,
    You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
    Regards,
    Vamshi.

  • SSO E-Sourcing and SAP GUI for HTML

    Hi,
    We are trying to provide integration between SAP E-Sourcing and SAP ECC via the SAP GUI for HTML. From an E-Sourcing project, we should define a link which will link us to the report via SAP GUI for HTML. Some parameters are automatically transferred via the URL so that the report will be prefiltered.
    The problem arises that we cannot create a SSO mechanism between SAP E-Sourcing and SAP GUI for HTML. The only documentation we can find is how to setup this SSO between the Portal and ESO (only included going from the EP to ESO). We need to find a way to do the opposite, i.e. SSO from ESO to SAP / EP.
    Thnx,
    Bram

    Dear Chong,
    I have came across the following information about SAP GUI For HTML
    With the version 7.02 / 7.20 of the NW Application Server
    the SAP GUI for HTML has been completely
    reworked.
    1.The rendering is now based on Unified
    Rendering which is also used by many other
    SAP UI technologies.
    2.Similar Look & Feel as other UI technologies
    3.Better Portal integration
    4.Full Theme support
    5.Unified client requirements
    But have not came across any note which converts the SAP GUI for HTML to SAP GUI for Windows in appearacne. I think the point 2 mentioned about says that in this version the SAP GUI for HTML will have appearnce like the other UI.
    Pls refer the [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06db80d-ebf4-2a10-6b99-faa652c69d5c?QuickLink=index&overridelayout=true]
    Hope it helps.
    Regards,
    Samir

  • Regarding SAP GUI For HTML

    Hi Everyone,
    My Requirement is Endusers needs to access applications from portal using SAP GUI For HTML.
    Because Some users in site or remote place they need Need to access applications.
    The Problem With SAP GUI For Windows it requires SAP GUI S/W Every Workstation.
    Before What i requires and what approach should i follow.
    What i will do in Portal,ITS And WAS.
    Please Do Needful.
    Thanks
    SubbaRao Chinta

    Hi Sarkar,
    I Follow Your Article.i created service under its in ecc and activate the service.
    and login portal and created sap IAC iview.after i click on preview
    i got the error below
    The following error text was processed in the system ECC : System error
    The error occurred on the application server epsap05_ECC_15 and in the work process 1 .
    The termination type was: ABORT_MESSAGE_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSU
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECC in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server epsap05_ECC_15 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then yo
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    What Can i DO for enabling Apllications Through SAP GUI.
    Thanks
    SubbaRao

  • NWBC Desktop running GUI for HTML

    My NWBC Desktop installation is running all SAP transactions using the SAP GUI for HTML.  How can I fix my NWBC installation to use the desktop SAP GUI instead of the GUI for HTML?

    First of all a supported SAP GUI for Windows version needs to be installed, it is best to go with the latest one which is 7.30 PL 9. That said at least 7.20 PL 8 is required. Secondly you have to maintain connection entries both in SAP Logon as well as NWBC connections. Thirdly make sure that in NWBC connections the SAP GUI Logon Description field matches the description of the same system in SAP Logon. If it still isn't working, activate trace in NWBC and share the result as an attachment, not embedded in the body of the message.

  • SAP transaction iview of GUI for html never works

    Hi All,
    We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
    There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
    However, each of these transaction iviews throws the same error messages as below :
    Error when processing your request
    What has happened?
    The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
    The following error text was processed in the system TD1 : This function is not possible
    The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP.
    I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
    I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
    When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
    I have noticed that none of the ITS services never work.
    I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
    Regards,
    Anil Kumar.

    Please don't cross post messages....

  • Connect to SAP R/3  using SAP GUI for HTML through saprouter

    Hello,
    I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string,  but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
    Thanks in advance.

    thanks, I can get the data from SAP R/3 to crystal report.
    but still dont know how to do the second question mentioned in previous message:
    once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

  • WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

    Hello,
    I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
    Any help is greatly appreciated,
    Bert

    Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
    Cheers

  • Change standard SAP GUI for HTML theme to portal theme

    Dear Experts,
    I have created transaction code for SAP GUI HTML for  a custom report program developed in SE38.
    We have created a URL iView in Websphere enterprise portal. The Transaction executing well and there are no issues.
    But the SAP GUI HTML uses SAP Standard theme. I wanted to change the input field background color which is similar to our portal theme.
    Please let me know , how to change the theme of the standard SAP GUI for HTML.
    Thanks in advance.
    any solution will be greatly appreciated.
    Best regards,
    Prabhu

    Hi Sushil,
    Could you please elaborate in detail with steps.
    Thanks for your help .. Greatly appreciated...
    Best regards,
    Prabhu

  • GUI for HTML on MC9090 WM5

    Hi everybody,
    I'm playing with a MC9090 Handheld and would like to know if it's possible to access SAP  (ECC6) through the GUI for HTML interface from a Netweaver Portal environment or else directly to ECC if this is the only way it can work.
    Currently when I enter the ECC address on the Handheld, I get the Netweaver Portal screen, enter my credentials and get a blank screen (if I do the same on my laptop, I directly get a SAP session).  On the Handheld, I'm running Windows Mobile 5 and attempting to access ECC through Pocket IE.  I tried with another browser (Opera) but then I get a message when attempting to display ECC that the page is incompatible with the browser.
    Any information around software setup, handheld config (or Portal or ECC) I would need to perform ot make this work would be greatly appreciated.
    Thanks in advance
    Michel

    Dear Michel,
    Full desktop browsing is expected to come to PIE before second half next year for Windows Mobile 6.1 and Windows Mobile 6.5 (yet to be released). Till that time we cannot use GUI for HTML on PIE of Windows Mobile devices.
    In Opera Mobile 9.5 - use opera:config to change / spoof the user agent to Desktop IE6 (agent id 3 if I am not wrong). This should allow you to use GUI for HTML, but some fuctionalities willbe broken - thanks to browser specific coding!
    Regards,
    Veera

  • WebDynpro with embedded SAP GUI for HTML transaction

    Hello,
    I have been given a requirement for a WebDynpro application that will have some links and figures at the top and underneath that there will be a SAP GUI for HTML transaction visible. What is the best method for handling this type of scenario? This is a 7.0 portal connecting to ECC 5.0 on the back-end.
    Thanks,
    Bert

    Hello Bert,
    I would have implemented your scenario in following way:
    1. Create a transaction iView in portal using SAP GUI for HTML.
    2. In the web dynpro application, you have multiple choices to use the transaction iview created in above step.
             a. Use a IFrame UI element giving it the portal based url for the transaction iview
             b. Use POrtal Navigation API to navigate to the transaction iview.
             WDPortalNavigation.navigateAbsolute(
             "ROLES://portal_content/com.sap.PageNavigationProject/com.sap.TargetPage",
                WDPortalNavigationMode.SHOW_INPLACE,
                (String) null,
                (String) null,
                WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
                (String) null,
                (String) null,
                [<url params>]
    Hope this helps you.
    Regards,
    Prasanna

  • Calling SAP GUI for HTML

    Dear Gurus!
    we are facing a peculiar issue. I have created 2 'GUI for HTML' transaction iviews one connecting to 'copy of dev ': ECC:system number x, and the other connecting to 'copy of quality': ECC, System number y.
    Both these ECC systems have same hostname but different system numbers and different system ID's ofcourse.
    When I create GUI for Windows Transaction iview, correct system is opened say transaction 'SMEN'. However when I create GUI for HTML, the Dev ECC system is called nevertheless in both the iviews.
    the behavior is the same even if I test with direct transaction using System Administrator--> support link.
    We are on 7.4 portal with backend ECC 6.
    Please advise
    Regards,
    Ankur Agarwal

    Thanks Pradeep,
    Yes the system objects are fine. there is just one similar entry for both ie the hostname, other wise everything is diff like system num, sys Id, gateway host etc.
    I am still perplexed why on testing, 'GUI HTML' goes to dev only in both cases, while "GUI windows", works fine and goes respectively to dev and qa.
    ANkur

  • ALV GRID  and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

    Hi All,
    We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
    We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
    We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
    If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
    We are on Basis Patch level 15.
    Does anyone have any ideas on how to fix this?
    Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
    Thank you so much!
    -Kevin

    Hi,
    Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
    Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
    If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
    Thanks!
    -Kevin

  • Launch Approval Appraisal Documents in Iview format not SAP GUI for HTML

    Hi,
    Sorry iam not sure whether this is the right place to post this question.
    I have a requirement where i need to change the appearance of UWL tasks related to appraisal approval.
    Whenever a user clicks on approve apraisal tasks it is popping SAP GUI for HTML and taking to the backend showing Performance appraisal display.Our client are in need of normal iview rather than sap view( sap gui view).
    I have identified the tasks related to approval appraisal.The tasks in the backend are
    approval appraisal - perf appraisal - ts91000005, URL generation - ts12300108 , Submitted obj - WS 91000003.
    i have created an iview based on http://xxx.xxxx:8000/sap/bc/bsp/sap/hap_document/documents_todo.htm?sap-client=xxx&sap-user=xxxx&sap-language=E
    i have given the ID and iview PCD link in SWFVISU.Reregistered UWL again and logged in as a test user.When clicked on Appraisal approval i can see the appraisals completed.It wont allow us to edit.All hap_documents are BSP pages.
    I guess i did something wrong.
    i have followed these links.
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/PMSworkflowsin+UWL
    Error: Launch appraisal Workitems in UWL in Portal...
    Appraisal approval after completion not possible in BSP
    Please let me know the procedure to show the approval items in a normal iview format.
    Thanks in advance.
    Chakri.

    Chakri,
    You will probably have  to change the XML being used in your UWL. Go into the ItemType portion for the PM task and check/set  the following properties
    connector="WebFlowConnector"
    defaultAction="launchIView"
    Check if your Action tags within the ItemTypes have the following properties
    name="launchIView"  handler="SAPAppLauncher"
    Check whether the Property within Action tags is linked to your BSP view  that you want to trigger when the task is clicked
    For e.g. <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/....."/>
    Once you change your XML dont forget to re-register your ItemTypes to the connector you are using.
    Good luck
    Pooja

  • How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

    Hello all,
    I have created a simple SAP Transaction iView of type SAP GUI for HTML.  This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System.  My requirement is, I dont want to see the menu bar that has these buttons.  How do I go about it?  Please advice.
    Note:  My iView is a SAP Transaction iView and not IAC service related iView. 
    Thanks
    Vicky R.

    You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
    It is a binary parameter with the following values/options:
    0  : Hiding the page header completely (not recommended)
    1  : Standard setting
                        This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
    2  : Displaying the title line
    4  : Displaying the buttons [Exit] and [Help]
    8  : Displaying the active system buttons on the screen ([Back] and [Cancel])
    16  : Displaying the system menu
    32  : Displaying the application buttons
    128 : Deactivating the information block in the status bar (new)

Maybe you are looking for