Required material to learn workflow from begining?

hi,
       anyone can provide material to learn workflow from the begining with example.
       Please if u can..
Thanks,
Saurin Shah..

Hi,
there are many articles / tutorials available in sdn, you just have to search...
here are some threads / tutorials on the same
workflow tutorials
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6ce9d51d-0b01-0010-00ba-b7934da764de
http://help.sap.com/saphelp_nw04/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
WorkFlow Tutorials with Screen Shot
http://help.sap.com/saphelp_nw04/helpdata/en/fb/135983457311d189440000e829fbbd/frameset.htm
http://www.****************/Tutorials/Workflow/Workflow.htm
PradeeP

Similar Messages

  • Can i material to learn XI from basics

    I am raghavesh and working as an ABAP consultant..
    i want to swith to XI..and i need some material for larning XI from basics..
    please do needfull and help me in getting some links...
    thank you...
    Raghavesh reddy

    Hi Raghavesh,
    Also I would suggest this link on SAP help for any info that you want on XI,
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
    JDBC Receiver: exact SQL statement
    /message/527697#527697 [original link is broken]
    And after you are done with the documentation probably you can go through this scenario,
    JDBC Receiver: exact SQL statement
    Also check the following threads which might help you a little more,
    Learning XI
    XI 3.0 Training
    Also for more info related to XI go through these links:
    XI -Starter
    http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    SAP XI - Where to Find Information
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
    All the information you need in XI :
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
    To understand the architecture of XI, Please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    You can also go through the url for Elearning :
    https://www.sdn.sap.com/sdn/elearning.sdn
    https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
    Following is the link for 'how to guides', A step by step guide to create scenarios:
    https://websmp201.sap-ag.de/nw-howtoguides
    XI is all about configuration of Adapters, to learn more please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    One of the most powerful feature of XI, Business Process Management:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
    How the messages are delivered through XI:
    http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm
    Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.
    For help on this scenario go through this blog it is in two parts thus I am providing both links below:
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    XI Cerification
    /thread/25311 [original link is broken]
    For XI in General:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Thanks,
    Prateek

  • Best Source to Learn SSAS from Begining

    Hello All People,
    I Want To Learn SSAS right From the Begining, I'm Good With SSIS & SSRS. Can Anyone Provide me links or Book Name For SSAS Please.
    Thanks In Advance.
    Raj

    Hi Raj,
    Microsoft.Press.Microsoft.SQL.Server.2008.Analysis.Services.Step.By.Step is a good choice for the person who starting learn SQL Server Analysis Services. Here are some useful link for your reference.
    http://blogs.msdn.com/b/microsoft_press/archive/2009/05/14/new-book-microsoft-sql-server-2008-analysis-services-step-by-step.aspx
    https://mis.uhcl.edu/rob/Course/DW/Resources/SQL-ServerAnalysisServices2008.pdf
    Besides, there are videos on the link below and it looks pretty good:
    www.microsoftvirtualacademy.com/training-courses/implementing-a-data-warehouse-with-sql-server-jump-start#?fbid=oP-6hKOL2_0
    Regards,
    Charlie Liao
    TechNet Community Support

  • How to learn workflow

    Hi Gurus,
    I want to learn Workflow.
    Please provide me the sap site links for learning workflow from step by step with examples and creating workflow.
    Thank you very much.
    Radha.

    Hi radhakrishna yerrabothu ,
    SAP Workflow is a tool to automate complex business processes where there is more than one user involved. SAP workflow maps the position in organization because SAP believes that Positions are more stable than the people.
    SAP Workflow is a process tool that is designed to facilitate and automate business processes involving the tasks sequence performed by the users (people in the workplace) and ensure that the right work is assigned in the right sequence at the right time to the right person in the workflow. The SAP workflow can be linked to other software tools such as Microsoft Outlook or Lotus Notes. Using SAP Workflow, each step of a business transaction can be easily monitored throughout the initiation and completion of the business processes. The SAP Workflow enables the process owners to track deadlines, determine the workload as well as provide statistics on the length of time to complete work processes.
    The key components of the SAP Workflow include the Workflow Definition, Work Items, Events triggers and the Organizational Structure in the workplace.
    Technically SAP Workflow is an integrated part of SAP application server.
    Example 1
    [[Approval procedure in Procurement. Some person creates a Purchase Order which must be approved by one or another (or even more than one) manager depending on the amount]]
    Example 2
    Suppose Person A is EDI administrator. It is defined that all EDI related jobs will be done by him. It is also defined that in his absence another person will do his job. If person A wants to take a planned leave and then he wants all his jobs assigned to him in his absence to be assigned to person B. He will nominate the person B in SAP and then SAP automatically assigns the job of A to B.
    The following r excellent websites on workflow containing PDF & PPT docs which will gain u confidence on workflow:
    Practical Workflow for SAP
    http://www.sap-press.com/downloads/h950_preview.pdf
    An expert guide to new SAP workflow capabilities
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c6456e89-0a01-0010-0189-a7961fe42034
    Workflow
    http://iris.tennessee.edu/Blueprint/Workflow/Workflow.doc
    Workflow Scenarios
    http://help.sap.com/saphelp_nw04/helpdata/en/04/926f8546f311d189470000e829fbbd/content.htm
    SAP Business Workflow
    http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
    Home to SAP R3 Webflow - Workflow ->
    http://www.erpgenie.com/workflow/tips.htm
    Why use SAP Workflow?
    http://www.insightcp.com/res_23.htm

  • Practice ( learn ) workflow at office on my system?

    Hi Workflow masters,
    this is the first time am ENTERING into WORLD of WORKFLOW...where i have been looking for.
    i am a ABAP programmer where i have been doing it for 5years am ABAP CIRTIFIED...and now i want to LEARN : WF.
    at my office we have workflow...and my query is...
    can i practice the workflow on it...if i do will i cause any problems to it?
    i went through your forums and i have enough INFO to learn WF - self ....but once i start will i be causing any problems?
    i have a linke which is : Workflows for Dummies - Introduction(Part I) & (partII) if i follow this will it cause any problems?
    can i have some info with regards to it...
    i am going through a SAP METERIAL which is  : BIT601.
    I hope this is the right material to start...looking forward to your replies...
    thank you,
    pasala.

    Hi,
    You are on the right track. There are lots of tutorials in SDN & Internet - just spend some time on searching them. BIT601 is also fine for learning, but I think that you cannot do all the exercises since the require some custom objects, which you won't have in your system.
    You will not break anything, if you don't modify the existing workflows. So just create new workflows from scratch, or copy the existing ones and modify the copies - the same rules apply as for example as with any ABAP object. => Do not modify anything, unless you are sure what you are doing.
    Regards,
    Karri

  • Unable to get Material No and Description from VBAP

    Hi Gurus
    Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
    regards
    report ZCHGDOC_BY_SALES no standard page heading
                              line-size 132.
    type-pools:
      slis.                     " ALV types
    Tables
    tables:
      cdhdr,                    " Change documents: Header
      cdpos,                    " Change documents: Items
      vbak,                     " Sales order: Header
      mara,                     " Material No
      user_addr,                 " User Address
      vbap.                     " Contract order: Items
    Types
    types:
      begin of ty_cdhdr,
        objectclas like cdhdr-objectclas,     " Object class
        objectid   like cdhdr-objectid,       " Object value
        changenr   like cdhdr-changenr,       " Document change number
        username   like cdhdr-username,       " Changed by
        udate      like cdhdr-udate,          " Changed on
        utime      like cdhdr-utime,          " Changed at
        tcode      like cdhdr-tcode,          " Transaction code
      end of ty_cdhdr,
      ty_it_cdhdr type ty_cdhdr occurs 0,
      begin of ty_cdpos,
        objectclas like cdpos-objectclas,     " Object class
        objectid   like cdpos-objectid,       " Object value
        changenr   like cdpos-changenr,       " Document change number
        tabname    like cdpos-tabname,        " Table name
        tabkey     like cdpos-tabkey,         " Table key
        fname      like cdpos-fname,          " Field name
        chngind    like cdpos-chngind,        " Change indicator
        value_new  like cdpos-value_new,      " New value of field
        value_old  like cdpos-value_old,      " Old value of field
      end of ty_cdpos,
      ty_it_cdpos type ty_cdpos occurs 0,
      begin of ty_dd03l,
        tabname   like dd03l-tabname,
        fieldname like dd03l-fieldname,
        as4local  like dd03l-as4local,
        as4vers   like dd03l-as4vers,
        rollname  like dd03l-rollname,
      end of ty_dd03l,
      ty_it_dd03l type ty_dd03l occurs 0,
      begin of ty_dd04t,
        rollname   like dd04t-rollname,
        ddlanguage like dd04t-ddlanguage,
        as4local   like dd04t-as4local,
        as4vers    like dd04t-as4vers,
        scrtext_l  like dd04t-scrtext_l,
      end of ty_dd04t,
      ty_it_dd04t type ty_dd04t occurs 0,
      begin of ty_kna1,
        kunnr like kna1-kunnr,                 " Customer number
        name1 like kna1-name1,                 " Customer name
      end of ty_kna1,
      ty_it_kna1 type ty_kna1 occurs 0,
       begin of ty_user_addr,
        bname    like user_addr-bname,              " user no
        name_textc like user_addr-name_textc ,      " Username
      end of ty_user_addr,
      ty_it_user_addr type ty_user_addr occurs 0,
      begin of ty_vbap,
        matnr     like vbap-matnr,             " Material No
        arktx     like vbap-arktx,             " Production Description
      end of ty_vbap,
      ty_it_vbap type ty_vbap occurs 0,
      ty_text(500) type c,
      ty_lines type tline,
      ty_it_lines type ty_lines occurs 0,
      begin of ty_merged,
        vbeln     like vbak-vbeln,            " Sales order number
        erdat     like vbak-erdat,            " Created on
        auart     like vbak-auart,            " Order type
        faksk     like vbak-faksk,            " Billing block in SD document
        netwr     like vbak-netwr,            " Net value
        waerk     like vbak-waerk,            " Currency
        vkorg     like vbak-vkorg,            " Sales organisation
        vtweg     like vbak-vtweg,            " Distribution channel
        vkbur     like vbak-vkbur,            " Sales office
        fkara     like vbak-fkara,            " Proposed billing type
        kunnr     like vbak-kunnr,            " Sold-to party
        bname     like vbak-bname ,           " User No
        xblnr     like vbak-xblnr,            " Reference
        fbuda     like vbkd-fbuda,            " Date services rendered
        username  like cdhdr-username,        " Changed by
        udate     like cdhdr-udate,           " Changed on
        utime     like cdhdr-utime,           " Changed at
        tcode     like cdhdr-tcode,           " Transaction code
        tabname   like cdpos-tabname,         " Table name
        tabkey    like cdpos-tabkey,          " Table key
        fname     like cdpos-fname,           " Field name
        chngind   like cdpos-chngind,         " Change indicator
        value_new like cdpos-value_new,       " New value of field
        value_old like cdpos-value_old,       " Old value of field
        scrtext_l like dd04t-scrtext_l,       " Description of field
        intnote   type ty_text,               " Internal note
        hdrnote   type ty_text,               " Header note
        name1     like adrc-name1,            " Sold-to party name
        matnr     like vbap-matnr,            " Material No
        arktx     like vbap-arktx,            " Product Description
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0,
      begin of ty_vbak,
        vbeln    like vbak-vbeln,             " Sales order number
        erdat    like vbak-erdat,             " Created on
        auart    like vbak-auart,             " Order type
        faksk    like vbak-faksk,             " Billing block in SD document
        netwr    like vbak-netwr,             " Net value
        waerk    like vbak-waerk,             " Currency
        vkorg    like vbak-vkorg,             " Sales organisation
        vtweg    like vbak-vtweg,             " Distribution channel
        vkbur    like vbak-vkbur,             " Sales office
        fkara    like vbak-fkara,             " Proposed billing type
        kunnr    like vbak-kunnr,             " Sold-to party
        xblnr    like vbak-xblnr,             " Reference
        objectid like cdhdr-objectid,         " Change document object
      end of ty_vbak,
      ty_it_vbak type ty_vbak occurs 0,
      begin of ty_vbkd,
        vbeln like vbkd-vbeln,                " Sales order number
        posnr like vbkd-posnr,                " Sales order item
        fbuda like vbkd-fbuda,                " Date services rendered
      end of ty_vbkd,
      ty_it_vbkd type ty_vbkd occurs 0.
    Internal tables
    data:
      it_cdhdr    type ty_it_cdhdr,
      it_cdpos    type ty_it_cdpos,
      it_fieldcat type slis_t_fieldcat_alv,
      it_kna1     type ty_it_kna1,
      it_user_addr type ty_it_user_addr,
      it_merged   type ty_it_merged,
      it_vbak     type ty_it_vbak,
    Material No
      it_vbap     type ty_it_vbap,
      it_vbkd     type ty_it_vbkd.
    data:
      wa_vbak  type ty_vbak.
    data:
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    constants:
      co_as4local_a           like dd03l-as4local     " Active version
                              value 'A',
      co_objectclas_verkbeleg like cdhdr-objectclas
                              value 'VERKBELEG',
      co_posnr_initial        like vbkd-posnr         " Initial item number
                              value is initial,
      co_posnr_initial_2        like vbap-posnr         " Initial item number
                              value is initial,
      co_save_u               type c                  " User display variant
                              value 'U',              " saving allowed.
      co_trvog_0              like vbak-trvog         " Sales order
                              value '0'.
    data:
      va_exit                 type c,                 " ALV display
      va_tabix                like sy-tabix.
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_vkorg  for vbak-vkorg OBLIGATORY,            " Sales organisation
      s_vkbur  for vbak-vkbur,            " Sales office
      s_vtweg  for vbak-vtweg,            " Distribution channel
      s_vbeln  for vbak-vbeln,            " Sales order number
      s_usrnme for cdhdr-username,        " Changed by
      s_udate  for cdhdr-udate.           " Changed on
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.   " Display variant.
    selection-screen: end of block b2.
    Initialization
    initialization.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
           exporting
                is_variant = st_variant
                i_save     = co_save_u
           importing
                e_exit     = va_exit
                es_variant = st_tvariant
           exceptions
                not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    Start of selection
    Extract order details from VBAK
      select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
             kunnr xblnr
             from  vbak
             into  table it_vbak
             where vkorg in s_vkorg
             and   vkbur in s_vkbur
             and   vbeln in s_vbeln.
      if sy-subrc ne 0.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
      loop at it_vbak into wa_vbak.
        va_tabix = sy-tabix.
        wa_vbak-objectid = wa_vbak-vbeln.
        modify it_vbak from wa_vbak
                       index va_tabix
                       transporting objectid.
      endloop.
    if sy-subrc ne 0.
      No data found for selection
       message s001(zgen).
       exit.
    endif.
    loop at it_vbak into wa_vbak.
       va_tabix = sy-tabix.
       wa_vbak-objectid = wa_vbak-vbeln.
       modify it_vbak from wa_vbak
                      index va_tabix
                      transporting objectid.
    endloop.
    Extract  Change data
      select objectclas objectid changenr username udate utime tcode
             from  cdhdr
             into  table it_cdhdr
             for   all entries in it_vbak
             where objectclas eq co_objectclas_verkbeleg
             and   objectid   eq it_vbak-objectid
             and   username   in s_usrnme
             and   udate      in s_udate.
      if sy-subrc eq 0.
        select objectclas objectid changenr tabname tabkey fname chngind
               value_new value_old
               from  cdpos
               into  table it_cdpos
               for   all entries in it_cdhdr
               where fname NE 'CMPRE_FLT'
               and objectclas eq it_cdhdr-objectclas
               and   objectid   eq it_cdhdr-objectid
               and   changenr   eq it_cdhdr-changenr.
      endif.
    Extract customer details from KNA1
      select kunnr name1
             from  kna1
             into  table it_kna1
             for   all entries in it_vbak
             where kunnr eq it_vbak-kunnr.
    ---- Changes are made here -
    Extract Material details from vbap
      select matnr arktx
             from  vbap
             into  table it_vbap
             for   all entries in it_vbak
             where
             vbeln eq it_vbak-vbeln
              and   posnr eq co_posnr_initial.
    -----------------End of Change ----------------------*
    Extract Contract No from vbkd.
      select vbeln posnr fbuda
             from  vbkd
             into  table it_vbkd
             for   all entries in it_vbak
             where vbeln eq it_vbak-vbeln
             and   posnr eq co_posnr_initial.
      perform merge_data tables it_cdhdr
                                it_cdpos
                                it_kna1
                                it_user_addr
                                it_merged
                                it_vbak
                                it_vbap
                                it_vbkd.
      if it_merged[] is initial.
        message s001(zgen).
        exit.
      endif.
    Release memory no longer required.
      free: it_cdhdr,
            it_cdpos,
            it_kna1,
            it_user_addr,
            it_vbak,
            it_vbap,
            it_vbkd.
    Build field catalog for call to report function
      perform build_field_catalog tables it_fieldcat.
    Output report.
      perform output_report tables it_fieldcat
                                   it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_cdhdr  type ty_it_cdhdr
                              pa_it_cdpos  type ty_it_cdpos
                              pa_it_kna1   type ty_it_kna1
                              pa_it_user_addr type ty_it_user_addr
                              pa_it_merged type ty_it_merged
                              pa_it_vbak   type ty_it_vbak
                              pa_it_vbap   type ty_it_vbap
                              pa_it_vbkd   type ty_it_vbkd.
    Local internal tables
    data:
      lit_dd03l type ty_it_dd03l,
      lit_dd04t type ty_it_dd04t.
    Local work areas
    data:
      lwa_cdhdr  type ty_cdhdr,
      lwa_cdpos  type ty_cdpos,
      lwa_dd03l  type ty_dd03l,
      lwa_dd04t  type ty_dd04t,
      lwa_kna1   type ty_kna1,
      lwa_user_addr type ty_user_addr,
      lwa_merged type ty_merged,
      lwa_vbak   type ty_vbak,
      lwa_vbap   type ty_vbap,
      lwa_vbkd   type ty_vbkd.
    Local variables
    data:
      lva_dd03l_tabix like sy-tabix,
      lva_dd04t_tabix like sy-tabix.
    Sort Data
      sort pa_it_cdhdr by objectid changenr.
      sort pa_it_cdpos by objectid changenr tabname tabkey fname.
      sort pa_it_kna1  by kunnr.
      sort pa_it_user_addr by bname.
      sort pa_it_vbak  by vbeln.
       sort pa_it_vbkd  by vbeln.
      loop at pa_it_vbak into lwa_vbak.
        clear lwa_merged.
      Assign sales order fields to reporting work area
        lwa_merged-vbeln = lwa_vbak-vbeln.
        lwa_merged-erdat = lwa_vbak-erdat.
        lwa_merged-auart = lwa_vbak-auart.
        lwa_merged-faksk = lwa_vbak-faksk.
        lwa_merged-netwr = lwa_vbak-netwr.
        lwa_merged-waerk = lwa_vbak-waerk.
        lwa_merged-vkorg = lwa_vbak-vkorg.
        lwa_merged-vtweg = lwa_vbak-vtweg.
        lwa_merged-vkbur = lwa_vbak-vkbur.
        lwa_merged-fkara = lwa_vbak-fkara.
        lwa_merged-kunnr = lwa_vbak-kunnr.
       lwa_merged-bname = 1wa_user_addr-bname.
        lwa_merged-xblnr = lwa_vbak-xblnr.
    Assgin Material to reporting work area
       lwa_merged-matnr  = lwa_vbap-vbeln.
      Get name of sold-to party from PA_IT_KNA1
        clear lwa_kna1.
        read table pa_it_kna1 into lwa_kna1
                              with key kunnr = lwa_vbak-kunnr
                              binary search.
        lwa_merged-name1 = lwa_kna1-name1.
      Get name  from PA_it_user_addr
       clear lwa_user_addr.
       read table pa_it_user_addr into lwa_user_addr
                             with key  = lwa_user_addr-bname
                             binary search.
       lwa_merged-username = lwa_user_addr-name_textc.
      Get business data from PA_IT_VBKD.
        clear lwa_vbkd.
        read table pa_it_vbkd into lwa_vbkd
                              with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-fbuda = lwa_vbkd-fbuda.
    Get Material Data
      clear lwa_vbap.
        read table pa_it_vbap into lwa_vbap
                             with key matnr = lwa_vbap-matnr
                                with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-arktx = lwa_vbap-arktx.
      Get internal note text for sales order
        perform read_text using '0002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-intnote.
      Get header note 1 text for sales order
        perform read_text using 'Z002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-hdrnote.
      Determine if change documents exist for sales order.
        clear lwa_cdhdr.
        read table pa_it_cdhdr into lwa_cdhdr
                               with key objectid = lwa_vbak-objectid.
        if sy-subrc ne 0.
          continue.
        endif.
        loop at pa_it_cdhdr into lwa_cdhdr
                            from sy-tabix.
          lwa_merged-username = lwa_cdhdr-username.
          lwa_merged-udate    = lwa_cdhdr-udate.
          lwa_merged-utime    = lwa_cdhdr-utime.
          lwa_merged-tcode    = lwa_cdhdr-tcode.
          clear lwa_cdpos.
          read table pa_it_cdpos into lwa_cdpos
                                 with key objectid = lwa_cdhdr-objectid
                                          changenr = lwa_cdhdr-changenr
                                 binary search.
          loop at pa_it_cdpos into lwa_cdpos
                              from sy-tabix.
            lwa_merged-tabname   = lwa_cdpos-tabname.
            lwa_merged-tabkey    = lwa_cdpos-tabkey.
            lwa_merged-fname     = lwa_cdpos-fname.
            lwa_merged-chngind   = lwa_cdpos-chngind.
            lwa_merged-value_new = lwa_cdpos-value_new.
            lwa_merged-value_old = lwa_cdpos-value_old.
          Get description for field - determine date element
            clear lwa_dd03l.
            read table lit_dd03l into lwa_dd03l
                                 with key tabname   = lwa_cdpos-tabname
                                          fieldname = lwa_cdpos-fname
                                 binary search.
            lva_dd03l_tabix = sy-tabix.
            if sy-subrc ne 0.
              select single tabname fieldname as4local as4vers rollname
                     from   dd03l
                     into   lwa_dd03l
                     where  tabname   eq lwa_cdpos-tabname
                     and    fieldname eq lwa_cdpos-fname
                     and    as4local  eq co_as4local_a.
              if sy-subrc eq 0.
                insert lwa_dd03l into lit_dd03l
                                 index lva_dd03l_tabix.
              endif.
            endif.
          If data element was found, get description
            if not lwa_dd03l is initial.
              clear lwa_dd04t.
              read table lit_dd04t into lwa_dd04t
                                   with key rollname   = lwa_dd03l-rollname
                                            ddlanguage = sy-langu
                                   binary search.
              lva_dd04t_tabix = sy-tabix.
              if sy-subrc ne 0.
                select single rollname ddlanguage as4local as4vers scrtext_l
                       from  dd04t
                       into  lwa_dd04t
                       where rollname   eq lwa_dd03l-rollname
                       and   ddlanguage eq sy-langu.
                if sy-subrc eq 0.
                  insert lwa_dd04t into lit_dd04t
                                   index lva_dd04t_tabix.
                else.
                  lwa_dd04t-scrtext_l = 'Description for field not found'.
                endif.
              endif.
            endif.
            lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
            append lwa_merged to pa_it_merged.
            at end of changenr.
            Only process field changes for this change document.
              exit.
            endat.
          endloop.
          at end of objectid.
          Initialise work area so we know change document for order has
          been processed.
            clear lwa_merged.
          Only process change documents for this sales order.
            exit.
          endat.
        endloop.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    data:
    Local variable
      lva_col_pos   type slis_fieldcat_alv-col_pos,
    Local structure
      st_fieldcat   type slis_fieldcat_alv.
      lva_col_pos = 0.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VBELN'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VBELN'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKBUR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKBUR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKORG'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKORG'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'KUNNR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'KUNNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'NAME1'.
      st_fieldcat-ref_tabname   = 'KNA1'.
      st_fieldcat-ref_fieldname = 'NAME1'.
      st_fieldcat-row_pos       = '1'.
        st_fieldcat-outputlen = '15'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'MATNR'.
      st_fieldcat-ref_tabname   = 'VBAP'.
      st_fieldcat-ref_fieldname = 'MATNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'SCRTEXT_L'.
      st_fieldcat-ref_tabname   = 'DD04T'.
      st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
      st_fieldcat-row_pos       = '1'.
       st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'UDATE'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'UDATE'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '10'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'USERNAME'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'USERNAME'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'FNAME'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'FNAME'.
      st_fieldcat-row_pos       = '4'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'CHNGIND'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'CHNGIND'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'WAERK'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'WAERK'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '5'.
      st_fieldcat-col_pos       = lva_col_pos..
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_NEW'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_NEW'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_OLD'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_OLD'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report
          text
    form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
                              pa_it_merged   type ty_it_merged.
    Local variables
    data:
      lva_formname type slis_formname,
      lva_repid    like sy-repid.
      lva_repid = sy-repid.
      lva_formname = 'ALV_USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program = lva_repid
          i_callback_user_command = lva_formname
          i_save             = 'A'
          is_variant         = st_variant
          it_fieldcat        = pa_it_fieldcat[]
        tables
          t_outtab           = pa_it_merged
        exceptions
          program_error      = 1
          others             = 2.
    endform.                    " output_report
    *&      Form  alv_user_command
          text
    form alv_user_command using pa_ucomm    like sy-ucomm
                                pa_selfield type slis_selfield.
    Local work areas
    data:
      lwa_merged type ty_merged.
      clear lwa_merged.
      read table it_merged into lwa_merged
                           index pa_selfield-tabindex.
      case pa_selfield-fieldname.
        when 'VBELN'.
        Contract Number
          set parameter id 'AUN' field lwa_merged-vbeln.
         call transaction 'VA03' and skip first screen.
    S_BCE_68001393
    when 'USERNAME'.
        Username
          set parameter id 'username' field lwa_merged-username.
          call transaction 'S_BCE_68001393' and skip first screen.
        when 'KUNNR'.
        Customer number
          set parameter id 'KUN' field lwa_merged-kunnr.
          set parameter id 'VKO' field space.
          set parameter id 'VTW' field space.
          set parameter id 'SPA' field space.
          call transaction 'XD03' and skip first screen.
      endcase.
    endform.                    " alv_user_command
    *&      Form  read_text
          text
    form read_text  using    pa_id
                             pa_inline_count
                             pa_name
                             pa_object
                             pa_text.
    Local internal tables
    data:
      lit_inlines type ty_it_lines,
      lit_lines   type ty_it_lines.
    Local work areas
    data:
      lwa_lines   type ty_lines.
    Local variables
    data:
      lva_tdname    like thead-tdname.
      refresh: lit_inlines,
               lit_lines.
      lva_tdname = pa_name.
      call function 'READ_TEXT_INLINE'
        exporting
          id                    = pa_id
          inline_count          = pa_inline_count
          language              = sy-langu
          name                  = lva_tdname
          object                = pa_object
        tables
          inlines               = lit_inlines
          lines                 = lit_lines
        exceptions
          id                    = 1
          language              = 2
          name                  = 3
          not_found             = 4
          object                = 5
          reference_check       = 6
          others                = 7.
      loop at lit_lines into lwa_lines.
        concatenate pa_text
                    lwa_lines-tdline
                    into pa_text separated by space.
      endloop.
    endform.                    " read_text ENDLOOP.

    Hi
    As per your code here:
    "-------------- Changes are made here ----------------
    *Extract Material details from vbap
    select matnr arktx
    from vbap
    into table it_vbap
    for all entries in it_vbak
    where
    vbeln eq it_vbak-vbeln
    and posnr eq co_posnr_initial.   " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
    " -----------------End of Change ----------------------
    Try as below by commenting the Item Number is INITIAL condition:
    select matnr arktx
       from vbap
       into table it_vbap
       for all entries in it_vbak
       where
       vbeln eq it_vbak-vbeln.
    "and posnr eq co_posnr_initial.
    Regards
    Eswar

  • Trigger a workflow from ABAP Webdynpro

    My Scenario:
    Step 1: When a user hits the SAVE button on the webdynpro form, check if that data is consistent only and trigger a message(I have a BAPI to handle this check).
    Step 2: If the data is consistent, then trigger a workflow to send an alert to an agent along with the data user entered on the form.
    Step 3: AGENT shall review the data(Same form from step 1 should appear here) and will have the option to SUBMIT / POST or REJECT. If SUBMITTED, data will be posted to R/3(I have a 2nd BAPI to handle this). If REJECTED, send an alert back to the USER who entered data in step 1.
    I checked lots of threads from the forum, none gave me a complete idea. Can any one give me a good documentation to trigger workflow from webdynpro to handle my requirement.
    I am new to webdynpro.
    I checked this blogs & articles also...
    /people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf
    Thanks a lot in advance.
    Best Regards,
    Kiran

    Hello Kiran,
    I slightly misunderstood you requirement earlier. But if I am not wrong this time, here is what you need to do:
    1) The Web dynpro form that you are creating is only for data entry purpose. But the agent who is going to review the data will need an access to this form. So this means that you need to save the content of this form to the database and provide a URL in the workflow workitem which the agent can use to open the web dynpro application with the form data on it.
    2) To access the correct form, you need to save the form data in a Z-table with a GUID attached to it. Generate this GUID using GUID_CREATE function module. In the window controller of the Web dynpro component, there will be a handleDefault method where you can read the parameter'GUID' from the incoming request and use it to read the form data from the database to display the form.
    3) You can use Object Oriented programming approach for creating Workflow. Check the following article to learn how to do that:
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0409e6c-d213-2d10-3cb6-c12d417626c1?quicklink=index&overridelayout=true]
    4) Create a Z-class and use this class as object type in your workflow (instead of BOR object).
    5) In the constructor of this class, pass a parameter GUID, which would be passed when you create an object of this class in the Web Dynpro forms "OnActionSave" method.
    6) Create a method in this class which will do the task of calling the BAPI to save the Acct Document. This method will be used in a Background task in a workflow step (after the agent approves the workitem).
    7) Create a method in the class which generates the URL to the webdynpro application with the GUID passed as parameter.
    (for eg: http://urltoserver/appname?GUID='guidoftheform').
    8) In your save method of WD application, call the method to raise event that triggers the workflow (using OO)
    lv_guid    = '04AE4546EED7101DE10000000A424026'. "use GUID_CREATE
           lv_objtype = 'ZWFCLASS'. " create a Z-class of your own
       TRY.
          CALL METHOD cl_swf_evt_event=>raise
            EXPORTING
              im_objcateg = 'CL'
              im_objtype  = lv_objtype
              im_event    = 'FORM_APPROVE' " this event needs to be defined in ZWFCLASS
              im_objkey   = lv_guid.
        CATCH: cx_swf_evt_exception.
      ENDTRY.
    Please read through the workflow using Object Oriented document in the URL that I have mentioned above before you read through these instructions.
    There would be a way to do this using BOR objects, but this is the way that I have tried and tested to use trigger workflows from Web dynpro applications.
    Best Regards,
    Gaurav
    Edited by: Gaurav Salkar on Apr 6, 2010 6:13 PM

  • Trigger a workflow from module pool screen at save button

    Hi,
    I am new to workflow.Please help me.My requirement is trigger a custom workflow from module pool screen at save button.
    Scenario is: Create a Z screen for material creation and after pressing save button workflow should trigger to approver and approver emailid should be fetch from Z table and have to provide a link in work flow for Z t-code which displays a report of material pending for approval..
    Please suggest me process how i can acheive this..
    Thanks

    Hi,
    If you're using standard bapi's to save the material, you can then use either the standard events which are already triggered or you coul add a change document for material changes or creation.
    Then this event can be the trigger of your custom workflow.
    Kind regards, Rob Dielemans

  • How can i trigger workflow from report

    hi i create one report and workflow. i want to trigger workflow from report, how can i do this one, please send me any code you have.
    Thanks & Regards
    Sankar

    Hi Sankar,
    There is another sample code...
       REPORT ZRGEVTCR.
    INCLUDE <CNTN01>.
    DATA: OBJKEY  LIKE SWEINSTCOU-OBJKEY,
          EVENTID LIKE SWEDUMEVID-EVTID.
    DATA: BEGIN OF EVENT_CONTAINER OCCURS 0.
            INCLUDE STRUCTURE SWCONT.
    DATA: END OF EVENT_CONTAINER.
    PARAMETERS:
      OBJTYPE  LIKE SWETYPECOU-OBJTYPE DEFAULT 'ZRGMARA',
      MATERIAL LIKE MARA-MATNR,
      EVENT    LIKE SWETYPECOU-EVENT   DEFAULT 'CREATED',
      VOLEH    LIKE MARA-VOLEH,
      LED      LIKE SY-DATUM           DEFAULT '19971231'.
    OBJKEY = MATERIAL.
    CLEAR EVENT_CONTAINER. REFRESH EVENT_CONTAINER.
    set input parameters for CREATED event.
    remark: to be more general, we had to use fm SWO_QUERY_PARAMETERS
    IF EVENT EQ 'CREATED'.
      SWC_SET_ELEMENT EVENT_CONTAINER 'LatestChangeDate' LED.
      SWC_SET_ELEMENT EVENT_CONTAINER 'VolumeUnit' VOLEH.
    ENDIF.
    CALL FUNCTION 'SWE_EVENT_CREATE'
         EXPORTING
              OBJTYPE           = OBJTYPE
              OBJKEY            = OBJKEY
              EVENT             = EVENT
         IMPORTING
              EVENT_ID          = EVENTID
         TABLES
              EVENT_CONTAINER   = EVENT_CONTAINER
         EXCEPTIONS
              OBJTYPE_NOT_FOUND = 1.
    IF SY-SUBRC NE 0.
      WRITE : / 'Object type', OBJTYPE, 'not found in object repository'.
    ELSE.
      IF EVENTID NE 0.
        WRITE : / 'At least one receiver was found'.
        COMMIT WORK.
      ELSE.
        WRITE : / 'No receivers found'.
      ENDIF.
    ENDIF.
    Hope this will help you to solve your problem that how to trigger workflow from the report.
    Thanks,
    Pramod

  • Material Description in SO from Customer-Material Info Record

    Hi,
    Currently whenever user is entering the customer material number in SO item, system is bringing the SAP internal material corresponding to that.  But the material description is coming from the material master only.
    I want the material description in the SO item to be populated from Customer-Material Info Record whenever user entered the Customer material number.
    Any possibilities for the same by standard configuration without going for any enhancements.
    Thanks in advance,
    Mallik

    Hello
    Go to T code VD52 choose that customer and material combination and click on to its details blue lens on application tool bar
    In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
    Now create a sales order and see
    Your requirement will be fulfilled
    If  a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
    Now in sales order the description will appear as  Super ball pen
    Hope you have checked the field info record in VOV8
    I have tried this tested this and getting it
    Regards
    Raja
    Edited by: ramanathan raja on Dec 2, 2008 10:43 PM

  • How to use Reserve the material in r/3 from CRM

    Hi,
    The client is using a customized process (i.e work flow ) to reserve material in r/3 from crm service order.
    Now they want to use standard reservation process of r/3 to reserve the stocks of the crm service order.
    The client is using the crm 4.0 and r/3 4.7 .
    I have checked the crm logistics integration process but it could not suit the requirements
    regards
    Edited by: Kamineni Sharma on Mar 31, 2008 8:35 AM

    hi Sharma
    check this may solve ur problem
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/4b/8bc43ace7a3b46e10000000a114084/frameset.htm
    Reward points if helpful
    cheers
    ranga

  • Call workflow from ABAP program

    created a zbusiness object (ZPRODH)with
    one key field product hierarchy,
    one attribute level number and
    one method display.
    I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
    In the abap program I am calling the funcion module, I
    CALL FUNCTION 'SWW_WI_START_SIMPLE'
    EXPORTING
    TASK = TASK
    IMPORTING
    WI_ID = WI_ID
    TABLES
    AGENTS = AGENTS
    WI_CONTAINER = WI_CONTAINER.
    It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
    Thanks in advance

    ttpa,
    Please check this thread:
    Re: Workflow from abap program
    Also check that your Fm do requires any explicit commit or not?
    Hope it will help u
    Cheers
    Jai

  • How to trigger a second workflow from a workflow?

    Hi All,
              I want your guidance in deciding the process flow of a workflow to be developed.
              We have a scenario in our project where we have to develop a workflow for vendor creation/change
              done through a portal.Now we have designed to do through this 2 workflows.
              First workflow is triggered when the create/change is done in the portal and the entry is made in a
              z table.This is the trigger point of first workflow.
              First workflow will identify all approvals and store them in another z table with all the approval levels  needed and the approval groups stored in the z table itself.
              Second flow will trigger on the entry made in this z table.It will read all approvals and send the mails to tha approvers in the respective aproval groups.
    Now can you please verify this.Is it possible to trigger a second workflow from a workflow?
    If yes then can you please explain the methodology to do the same?
    Also if any other approach can be taken,please suggest the same.
    Thanks a lot,
    Saket.

    First Develop a Z Business OBject (let ZVENDOR) to update the Z table when ever a Vendor is created or Changed.
    Now For the first workflow do like this
    From the WD application when the user clicks on the SAVE button then call the Function module SAP_WAPI_START_WORKFLOW .
    Develop a method in the ZVENDOR to update the Z table.Make the method as background.
    Use the method that you have created in the above point in the first workflow but prior to this make sure that you have passed all the required information to the workflow.
    Once the table is updated.
    For Second Workflow
    Create a Change document object for the Ztable.
    And trigger the workflow when ever any entry is made or changed in the z table

  • Workflow from abap program

    I created one workflow with a zbusines object. I did not create any event for the business object. only key fields and method.
    now my question is, how can I call or trigger the workflow from the abap program. please adive

    Hi Mat,
    u can use FM SAP_WAPI_START_WORKFLOW.
    Please find sample coding
    data: z_bus2080 type swc_object.
    data: begin of bus2080_key,
    id like viqmel-qmnum,
    end of bus2080_key.
    data: wf_cont type SWR_CONT occurs 0 with header line.
    parameters: qmnum like viqmel-qmnum.
    bus2080_key-id = qmnum.
    swc_create_object z_bus2080 'BUS2080' bus2080_key.
    Populate first container element - object type BUS2080
    clear wf_cont.
    move: 'BUS2080' to wf_cont-element,
    z_bus2080 to wf_cont-value.
    append wf_cont.
    Populate second container element - char variable USERNAME
    clear wf_cont.
    move: 'USERNAME' to wf_cont-element,
    sy-uname to wf_cont-value.
    append wf_cont.
    Call WAPI function
    CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
    EXPORTING
    TASK = 'WS94600159' "<-- Your workflow ID
    LANGUAGE = SY-LANGU
    IMPORTING
    RETURN_CODE =
    WORKITEM_ID =
    TABLES
    INPUT_CONTAINER = wf_cont
    MESSAGE_LINES =
    MESSAGE_STRUCT =

  • Start a Workflow from an incoming Internet message

    Hi All,
    I have a requirement , where I need to trigger a Workflow from incoming outlook email.The email will also have a PDF    attachment of Invoice which should get archived and other details should help to trigger the workflow.
    I checked in Inbound Distribution(SO28), but not sure how I could configure the same.
    Or Is there any other possibility that I could look for?
    Kindly give you inputs.
    Regards,
    Bhargavi Vaidya

    Hi,
    Kindly please check the transaction SO50.
    Also check the follwoing link, this might be helpful.
    /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
    Thanks andregards,
    SNJY

Maybe you are looking for