Required some help regarding Identity Auditor

Hi all
Actually i am new in IDM field and want to explore Identity auditor. I have SIM 7.1 installed on my system. Actually i got the enough documentation about identity auditor but i want to find out from where i can reach the identity auditor .I mean if there is a special url to reach on identity auditor link and what can this auditor do.
Any pointer will really helpful for me.
Thanks in advance

Hello.
IdM 7.0 (Fall '06) merged Identity Manager, Identity Auditor and Identity Manager, SPE into a single product. As part of that convergence, the Admin Console was also updated to reflect the needs of all three products.
A number of features that had been in Auditor are available in the Compliance tab (e.g. Access Scans, Audit Policies) and in the Reports tab, there's a selector to shift between IdM Reports (e.g. reports tied to provisioning, and general user management activities) and traditional Auditor Reports (e.g. reports tied to compliance, audit policy scans, etc.).
So - same Admin Console for the Auditor / Compliance features. To make sure you 'see' everything, be sure to check the assigned Capabilities to your Admin / DA. There were Capabilities linked to Auditor and you'll want to make sure these are assigned to the DA you're using.
Make sense?

Similar Messages

I need some help Regarding Cumulative totals

Hi ,
i have a requirement
1) we have columns calender Periods and actual to date. The requirement is we need cumulate the actual to date. i have applyed RSUM function in column formula.
2) it is working fine. But again the requirement is this cumulative solution is changed based on selected calender periods. but this is not expected.
3) ex:-
calender period actual Units Cumulative Units
oct - 2010 10 10
Nov-2010 9 19
Dec-2010 15 34
Jan-2011 25 59
Feb-2011 12 71
March-2011 19 90
April - 2011 13 103
May - 2011 18 121
June - 2011 24 145
this is the reqiurement but i have a Prompt Like
i hve selected resource categery some xyz and stert period is Jan -2011 and end period is May - 2011
the values disply's like bellow
Resource Category start Period End Period
xyz Jan - 2011 May - 2011
Jan-2011 25 25
Feb-2011 12 37
March-2011 19 58
April - 2011 13 71
May - 2011 18 89
But this is not actual cumulative units the actual value for Jan 2011 cumulative value is 59 not 25
can any one help me regarding this issue
regards,
ramesh

Hi,
Refer this link abt iview properties & set authorization ...
http://help.sap.com/saphelp_nw04/helpdata/en/13/81a66d100011d7b84b00047582c9f7/frameset.htm
Color- you have to change portal theme...
Width- create a new Loyout..
Regards,
Senthil K.

Require some help in mapping a scenario

Respected sir,
Greetings for the day!!!!!!
Currently we've decided to do repair work of our tools(mainly dies) inhouse.
we dont have a PM module.
generally for rework purpose we require 3-4 operations like milling,drilling.....
my question is that can we map this scenario from PP producton order point of view.
what is the basic settings/ requirements needed in doing this.....
plz correct me if i am going wrong some where.....
Thanks for your support,
Rahul

Hi,
A few thoughts from my side
1. Create a cost center to collect all rework costs (tcode - KS01)
2. Discuss with your Fi/Co personnel if they wish to have a different RA key & settlement for these rework orders, if yes then create a new order type in OPJH, OPL8 & assign the RA key, settlement profile & costing variants defined by your FI / Co personnel.
3. Use this order type in CO07 & specify the settlement as the cost center.
4. I presume this rework will be done in different work centers as compared to your normal ones, if yes define new work centers in CR01, define a cost center & allocate activity cost in KP26 for the activity.
5. In the operations tab, select the work centers for each rework operation.
6. If you have inventorised the tools / dies, then specify the same with + ve & -ve qty in the component list, this will ensure that the tool is first issued to the order & then after rework you can receive it back.
7. If you need other components to be issued to this order specify the same. (All component issue can be done via MB1A & the receiving of the main tool / die can also be done via MB1A).
6. Post operation confirmations via CO11n & this will ensure the rework operation costs are posted onto the order.
7. Once the rework is completed, proceed to calculate, wip, variance, settlement as per normal production order settlement.
Test the above in your sandbox & if it meets your requirement, proceed to use it in production system.
Regards,
Vivek

Required some information regarding synckey.

iam trying to modify the standard table MDK_INVENTORY by using syncbo of type S01 :- as it requires sync key
can some one inform me how to get the sync key and does the sync key is generated for each and every entry.
kindly give me some inputs.
Regards
Manohar.
Edited by: Gouri Manohar Gadhamsetty on Oct 24, 2008 12:28 PM

Hi Julian,
Thanks for the information.In getSyncBoInstances() method I am tring to create the SyncBo instance by passing SyncBo name and sync key.But it is unable to create the SyncBo object, returning null.
SyncBo sb = getSyncBoInstanc(syncBoName,syncKey);
(sb is null)
what might be the problem.Kindly reply soon.
Regards,
Manohar.
Edited by: Gouri Manohar Gadhamsetty on Oct 24, 2008 3:13 PM

Need some help regarding PO numbering

This is for a Real Estate Company. Here each Project is Inventory Org.
Presently we are following automatic numbering for purchase orders.
However here client is insisting for Purchase order numbering to be automatic- alpha numeric and again the crucial requirement is that it should be inventory organization(project) wise i.e. different alphanumeric numbering sequence for each inventory org.
Eg: If we have two inventory orgs (say A, B) , then Purchase orders for A should follow numbering like A-001,A-002.......
Similarly for inventory org B, it should be B-001,B-002....
Can anyone suggest is there any way to achieve this..
Ram

So I have seen this done, but none of it was standard. You would leave your normal numbering system in place, but then have a SQL guy create a custom script to upload PO directly into your system. Typically with these loaders you can script in the use of any PO numbering scheme that you designate. If you migrated Oracle from a previous system you may have some of these tools especially if you had your historical data uploaded prior to going live. We used to call these PO Loaders, but the function operates in a similar fashion to a requisition loader which takes a flat file and uploads it directly into the system.

Looking for some help regarding motion menus in encore from AE.

Need help making a motion menu from after effects. can figure out the import process into encore. I cant get the buttons i made in AE to work. Anyone?

Read this (but don't make your plan till you read the link at the end of the post):
http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
The important part is:
"The loop point is used to initially disable the buttons. Until the loop point is reached, the viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled only when the menu is first displayed. For any subsequent repetitions, the Duration is shorter and the start point of all video content in the menu is offset."
So in AE, you create a video (the motion background) that includes the image of the buttons as they fly in. Encore is adding the highlights. AE for a period of time could also create the button layers, but you will be less confused if you use Encore and Photoshop for the menu file itself.
I forgot to give you this help link, which is the Encore help file for working with AE:
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
This method starts with a menu in Encore, and creates an AE composition from there. It may only work with AE CS6 since you have EN CS6. I don't recall if this is technically a form of dynamic link, which requires matching versions of the applications.
There are lots of ways to skin this cat.

Need some help regarding the backgrounds

I am new to adobe dreamweaver & I would like to ask some sort of a stupid question
When I save a website over the net, the folder always contains the background & the other images as small tiny images while when using Dreamweaver if I want to use a background image, I just load it.
My question is do they actually load the background image as small parts or the browser devides the image to smaller parts when saving the page?
Thanks for ur help & I hope some 1 gonna answer me soon enough.

If you (or someone else) use a repeating background image (128X128 for instance) the browser, per instructions from the HTML or CSS, will "tile" the same image over and over to create the background. This doesn't display multiple copies of the image, but references it over and over alongside and below itself until the page reaches it's end.
One exception to this is when there is a single large image (1024X768 for instance) used as a background, which usually doesn't repeat. In that case, if you were to download it, it would download as the one large image.
Another exception is if the image is cut into pieces and put back together in divs inside the page. Often this is done to create the illusion of an image in a layer above the page, unrestricted by the square dimensions of HTML layout.

Need some help regarding Client Proxy generation and test via SOAMANAGER

Hello,
we are integrating a 3rd party Java client via webservices.
For that matter I generated a client proxy (consumer proxy) in se80 using the existing WSDL.
This worked fine.
The I wanted to create a logical port.
Since this is only possible in SOAMANAGER I tried it there.
Trying to do this automatically by the given WSDL file didn't work. The system dumps.
So, I tried the manual approach by entering the server name and path in the 'Transport settings' tab.
Now I wanted to test this.
Unfortunately the test function in se80 (Proxy->Test) doesn't show a positive result.
I always get an error
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response:
ICM_HTTP_CONNECTION_FAILED")
So, I am kind of stuck here.
Do you guys have any idea what's wrong (approach, settings, bugs)?.
I tested the webservices with a test application (soapUI), and they work fine.
So it seems to be a problem in the proxy framework or a network problem?
I really appreciate any kind of help.
Thanks,
Michael

i created the port in soamanager.Do i need to create in lpconfig also?
yes i have loaded the certificate in strust.
i am getting the response also from the web service. as Security requirements are not satisfied because the security header is not present in the incoming message.
i need to pass the user name and password while using the method.wsse security.wld u have any clue?

Require some help making a random map.

1) When you click on the "Generate" button a 15x21 board of Tile symbols is created, with top-left corner at (10,10). Initially all tiles should be blank.
i need to somehow get that done.
here is my code so far, i have a lot of graphics, movie clips and a button relating to the script, although right now they are not important.
var ghosts:Array = new Array();
var timers:Array = new Array();
//======== ghosts and ghost behaviour =================//
var ghostHoriz=1;
for (var row = 0; row < 4; row++) {
          var g = new Ghost();
          var t:Timer=new Timer(400);
          g.timer=t;
          timers[row]=t;
          g.horiz=ghostHoriz;
          ghostHoriz*=-1;
          if (row==0||row==1) {
                    g.vert=1;
          else {
                    g.vert=-1;
          t.addEventListener(TimerEvent.TIMER, moveGhost);
          ghosts[row]=g;
          g.visible=false;
          addChild(g);
var ghostIndex=0;
function moveGhost(evt:TimerEvent) {
          var t=evt.currentTarget;
          var k=timers.indexOf(t);
          var g=ghosts[k] as Ghost;
          if (g.visible) {
                    var r=g.row;
                    var c=g.col;
                    with (g) {
                              if (Math.random()<0.5) {
                                        if (((horiz > 0 && (c+horiz)<21)||(horiz < 0 && (c+horiz)>=0)) && (map[r][c+horiz]==0)) {
                                                  col+=horiz;
                                                  x+=horiz*20;
                                                  map[r][c+horiz]=2;
                                                  map[r][c]=0;
                                        else {
                                                  horiz*=-1;
                              else {
                                        if ( (( vert > 0 && (r+vert)<15)||( vert < 0 &&(r+vert)>= 0)) && (map[r+vert][c]==0)) {
                                                  row+=vert;
                                                  y+=vert*20;
                                                  map[r+vert][c]=2;
                                                  map[r][c]=0;
                                        else {
                                                  vert*=-1;
// ================= Button behaviour ========== //
generate_btn.addEventListener(MouseEvent.CLICK, generate);
function generate(m:MouseEvent = null) {
          initMap();
          ghostIndex=0;
// other stuff
          displayMap();
var map:Array = new Array();
var tiles:Array = new Array();
function initMap(){
function displayMap() {
          for (var row = 0; row < 15; row++) {
                    for (var col = 0; col < 21; col++) {
                              var test=map[row][col];
                              tiles[row][col].x=10+col*20;
                              tiles[row][col].y=10+row*20;
                              switch (test) {
                                        case 2 :
                                                  g=ghosts[ghostIndex];
                                                  g.x=10+col*20;
                                                  g.y=10+row*20;
                                                  g.row=row;
                                                  g.col=col;
                                                  if (row==0) {
                                                            g.vert=1;
                                                  else {
                                                            g.vert=-1;
                                                  g.visible=true;
                                                  g.timer.start();
                                                  ghostIndex++;
                                                  break;
bit long :/
anyway when I basically need it so when you press generate it comes up with a random, how do i put this....it comes up with a random pacman sort of design. And everytime generate is clicked it changes, anyone know anything?
also note, with the code up there, if I do click generate i get this error...
Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts.
TypeError: Error #1010: A term is undefined and has no properties.
          at Pacmanscripting_fla::MainTimeline/displayMap()
          at Pacmanscripting_fla::MainTimeline/generate()
thanks in advance.

erm i also have this. Its basically a list of the things that need to be accomplished in this task D:
1) When you click on the "Generate" button a 15x21 board of Tile symbols is created, with top-left corner at (10,10). Initially all tiles should be blank.
2) Extend the functionality behind the "Generate" button so that a random configuration of walls appears - 100 of the tiles should now be "filled". Each time you click on "Generate" there should be a different configuration. Hint: create a map array initially consisting of 0's. Generate should randomly produce 100 pairs of (row, column) values where you set the value in the map array to 1. Use the map array to display the board.
3) Extend the "Generate" functionality even further. You should include in the application 4 instances of the Ghost symbol and one instance of the MyPac symbol. When you click on the "Generate" button, the ghosts should appear in each corner of the board, and the myPac should be in row 8, col 11 of the board. "Generate" should still produce a random configuration of 100 filled cells each time it is clicked, but the ghosts and myPac should always appear in the prescribed positions.
4) Finally, you should animate the ghosts and add key-handling for the myPac symbol. The ghosts should "patrol" the board ie they can move randomly in the array but cannot go through "walls" or myPac. The starting fla includes some code you might find useful for this part of the assignment. myPac should move with arrow-key presses, but also cannot go through walls or ghosts
if you are able to help me with steps 1-3 then thats enough. you dont need to do step 4 :3

Some Help regarding Clustering setup

          1.What are the versions of Weblogic supports clustering
          2.Do we need to have the same version of weblogic on the clustered servers
          3.Is it platform independent
          4.Can i work with different Unix flavours (Sun Solaris and HP-UX)
          5.What are the minimum requirements of S/W and H/W to setup Clustering
          6.Can i have two different versions of weblogic on the same server (Ex Weblogic
          6.0 and 6.1)
          Regards
          Ranga rao


[att1.html]

Need some help regarding the component usage

Dear ALL,
I have one scenario something like this .
I have a main component say ZComp1 and in it i have created one view in which we two drop downs and i have 28 view containers depending upon the drop down values these view containers will be visible here all the view container i am using for displaying by means of component usage (i.e 28 compoenents i am calling into my main ). So now when i run my main application it is taking minimu of 2 mins to display the screen . To test whats the problem i have written some code in the handle default of main window and set the break point what i observed is quite surprising that when i run the apllication it takes hardly 2 mins of time to reach my handledefault method (which is the first one to trigger when i run the apllicatin) . Please suggest me what can be doen to overcome this issue. or suggest some alternative to improve performance.
Note : When there is less amount of data in the screen then it takes less time to execute or else it takes hell lot of time plz suggest :(.
Awaiting for your valuable suggestions.
Regards,
Sana.

Hi Misbah,
28 VCO are too much in a view.
So, try to revamp teh design and reduce the VCO's in a view.
Another thing would be, Every WDDOINIT, and WDDOMODIFY view of the used components would be called when you try to load the component at first.
In your case that is happening, and please check and confirm it.
A proper modular design would be a better approach in handling the situation.
Good day!
Regards,
Shashikanth. D

Need some help regarding validation of input in a text field

Hello everyone,
i am new to all this website designing stuff and is working on my first website (treausre hunt types) and expecting some guidance over here.   :-)
I have successfully managed to validate the login page using server behaviour.
Let me explain what i need guidance with.
After login , the user is redirected to a page where a question is asked and he has to type the answer in the given text field and click on the submit button. Now i want to validate the given answer with the correct one and if it is answered correctly then the user is redirected to the next page.
the question is what and how am i supposed to do this? i am using adobe dreamweaver cc and wampserver as localhost.

This becomes complicated to do it the way you want BUT YOU CAN do it - you just need to be a bit more efficient and get a template together.
Copy the 4 documents below and paste into seperate DW files to see how this works then look at the code and see if a pattern becomes noticeable to you. What we are doing is adding 1 to each level and checking the user has accumulated a score to that level - if not they are bumped down to the level which they have reached or in the case of not reaching any level to question 1.
question_1.php:
<?php
// Start the session
session_start();
?>
<?php
if (isset($_POST['submit'])) {
$answer = trim($_POST['answer']);
if(($answer == "Green" || $answer == "green")) {
$_SESSION['question'] = 2;
$correct = "<p>Correct Answer</p><p>You will automatically be taken to the next level</p>";
header( "refresh: 5; url=question_2.php" );
else {
$wrong = "<p>Wrong, please try again,</p>";
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Quiz</title>
<style>
p {
font-size: 20px;
color:#930;
margin: 0;
padding: 10px 0 8px 0;
</style>
</head>
<body>
<h3>Question 1.</h3>
<h2>What color is grass?</h2>
<form id="quiz" action="question_1.php" method="post">
<label for="answer">Answer<br>
<input type="text" name="answer" id="answer"></input>
<input type="submit" name="submit" value="Sumbit">
</label>
</form>
<?php
if(isset($wrong)) {
    echo $wrong;
elseif(isset($correct)) {
echo $correct;
?>
</body>
</html>
question_2.php
<?php
// Start the session
session_start();
?>
<?php
// This sends the user to question 1 if SESSION question has not been set
if(!isset($_SESSION['question'])) {
header('Location: question_1.php');
// This sends the user back if SESSION question is LESS than 2
if($_SESSION['question'] < 2) {
header('Location: question_1.php');
if (isset($_POST['submit'])) {
$answer = trim($_POST['answer']);
if(($answer == "Blue" || $answer == "blue")) {
    $_SESSION['question'] = $_SESSION['question']+1;
$correct = "<p>Correct Answer</p><p>You will automatically be taken to the next level</p>";
header( "refresh: 5; url=question_3.php" );
else {
$wrong = "<p>Wrong, please try again,</p>";
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Quiz</title>
<style>
p {
font-size: 20px;
color:#930;
margin: 0;
padding: 10px 0 8px 0;
</style>
</head>
<body>
<h3>Question 2.</h3>
<h2>What color is the sky?</h2>
<form id="quiz" action="question_2.php" method="post">
<label for="answer">Answer<br>
<input type="text" name="answer" id="answer"></input>
<input type="submit" name="submit" value="Sumbit">
</label>
</form>
<?php
if(isset($wrong)) {
    echo $wrong;
elseif(isset($correct)) {
echo $correct;
?>
</body>
</html>
question_3.php
<?php
// Start the session
session_start();
?>
<?php
// This sends the user to question 1 if SESSION question has not been set
if(!isset($_SESSION['question'])) {
header('Location: question_1.php');
// This sends the user back if SESSION question is LESS than 3
if($_SESSION['question'] < 3) {
header('Location: question_2.php');
if (isset($_POST['submit'])) {
$answer = trim($_POST['answer']);
if(($answer == "Yellow" || $answer == "yellow")) {
    $_SESSION['question'] = $_SESSION['question']+1;
$correct = "<p>Correct Answer</p><p>You will automatically be taken to the next level</p>";
header( "refresh: 5; url=question_4.php" );
else {
$wrong = "<p>Wrong, please try again,</p>";
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Quiz</title>
<style>
p {
font-size: 20px;
color:#930;
margin: 0;
padding: 10px 0 8px 0;
</style>
</head>
<body>
<h3>Question 3.</h3>
<h2>What color is the sun?</h2>
<form id="quiz" action="question_3.php" method="post">
<label for="answer">Answer<br>
<input type="text" name="answer" id="answer"></input>
<input type="submit" name="submit" value="Sumbit">
</label>
</form>
<?php
if(isset($wrong)) {
    echo $wrong;
elseif(isset($correct)) {
echo $correct;
?>
</body>
</html>
question_4.php
<?php
// Start the session
session_start();
?>
<?php
// This sends the user to question 1 if SESSION question has not been set
if(!isset($_SESSION['question'])) {
header('Location: question_1.php');
// This sends the user back if SESSION question is LESS than 4
if($_SESSION['question'] < 4) {
header('Location: question_3.php');
if (isset($_POST['submit'])) {
$answer = trim($_POST['answer']);
if(($answer == 4 || $answer == 4)) {
$_SESSION['question'] = $_SESSION['question']+1;
$correct = "<p>Correct Answer</p><p>You will automatically be taken to the next level</p>";
header( "refresh: 5; url=question_5.php" );
else {
$wrong = "<p>Wrong, please try again,</p>";
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Quiz</title>
<style>
p {
font-size: 20px;
color:#930;
margin: 0;
padding: 10px 0 8px 0;
</style>
</head>
<body>
<h3>Question 4.</h3>
<h2>What is 2 + 2?</h2>
<form id="quiz" action="question_4.php" method="post">
<label for="answer">Answer<br>
<input type="text" name="answer" id="answer"></input>
<input type="submit" name="submit" value="Sumbit">
</label>
</form>
<?php
if(isset($wrong)) {
    echo $wrong;
elseif(isset($correct)) {
echo $correct;
?>
</body>
</html>

Need some help regarding value date

hiii experts...i want little clarification about value date and its effects... i searched scn and google but my issue is like...when we receive cheque today i.e 11/06/2014... it will be come in bank a/cs nearly on 14/06/2014... so if we write the value date 14/06/2014... will that bank ledger show effect on 14/06/2014... moreoveer the user posted a entry development server for 1/3/2014 and gave value date of 1/4/2014.. now in faglb03... how it will reflect..i know its basic question but i didnt find any solution through searching soo posted... please guide me..
Regards
Abhay

hey mani... thankss for the reply... its shows the meaning which i understood but the effect in ledger... when it will show... value date or posting date??
e.g
a customer gives cheque today 11/6/2014.. user deposits cheque today and it will come into bank account near on 14/6.2014..
IN SAP
user does entry today i.e 11/06/2014
in bank g/l... he gives value date 14/06/2014... now when he posts the entry... the entry will shown in ledger on 11/06/2014... but the actual amount will come in 14/06/2014... soo my question is ... whts the user of value date then if he is posting the document on posting date

Required some needful regarding my issue

hiiiiii
how upload opm production completed batches.....
please do some needful n advance thankful.....

Ajay,
Are you looking at uploading the batches in completed status into OPM from another application?
If so, you can leverage the standard APIs in OPM. However, following points may be considered before the batches are uploaded
1. Valid Formulas / Routings & Recipes exists if you are in OPM 11i
2. How would the Raw Materials ( Ingredients) & Finished Products be accounted for and reconciled
3. How would the resource usage be accounted for
4. Impact on costing
If you are looking at only a few such batches, then these may be created manually as well, however considering the above points.
krishna
Edited by: Krishna on Aug 16, 2010 2:40 AM

HT3874 I have just installed the recommended updates which has resulted in Suitcase no longer being able to open. I am running 10.6.8. I am on a deadline so would be grateful for some help!

I would be grateful if I could get some help regarding Suitcase. I just installed three updates that were recommended (one was for iTunes, another a security update and to be honest, can't even remember what the third one was for). Anyway, after two restarts I can no longer run Suitcase which is a bit of a disaster as I working to deadline and I need Word and Quark XPress.
What can I do? Suggestions most welcome with urgency!
Many thanks,
kkb

Hi there
Thank you for your response – I am running 10.6.8 (apologies for any confusion if I didn't make it clear in my earlier post).
I have just returned from a meeting so was pleasantly surprised to see so many responses. And I normally *do* know better and in my old job I would have never updated whilst on a deadline. Somehow working from home (only my second week) has made me forget all the rules!
I am a bit scared of removing anything or reinstalling at the mo. But I will look into it. I feel quite out of touch with how Macs operate now (I was clearer about OS9). But thank you and fingers crossed that it works!

Required some help regarding Identity Auditor

Similar Messages

Maybe you are looking for