Requiremen​ts Gateway TS-Intermi​diate File

Hi,
I would like to know if there is change to modify the Intermidiate File Genenerator for TestStand?
or is there a way to implement user defined generators?
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Solved!
Go to Solution.

Hi Al,
I have decided to try it with the report.
But combining ID and Limit in the XML Report will fail.
I opended a new thread to discuss: 
http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-Identifier-Format/td-p/2338498
btw i have looked on the NI-RG code. It seems most stuff is done in ot-scripts.
I suppose TeststandSequenceFile generator is done in ot, too. But this script is complied.
i have no change to look inside. Is there a reason why the compiled one is shipped while the
Microsoft one's like Word,Excel and Access are non complied ?
Regards
Juergen  
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

  • E-Commerce Gateway Question about Interface File Definition.

    Hello Gurus,
    Does anyone know if Oracle e-Commerce Gateway (11.5.10.2) deliver the Interface File Definition for Inbound Purchase Orders (850/ORDERS) - _'IN: Purchase Orders (850/ORDERS)'_ out of the box?
    I see Interface File Definition for OPM Purchase Order along with a bunch of other trx sets (like ASNI, INI, INO) but not Purchase Orders (850/ORDERS) in the instance that I am working... so just wanted to verify.
    Thanks
    Dave

    Following are some of the pros of using XML Gateway:
    1) XML is being accepted and more and more technologies are moving towards XML, so that "seems" to a future ready solution
    2) XML processing is real-time.
    3) Most of the maps for universally accepted standards are seeded in Oracle.
    4) You can use Oracle Supplier Network(Free service provided by Oracle) with your XML gateway to transmit/receive xml documents to a supplier who may or may not be accepting the format you are generating(e.g. if your PO is in OAG standard and your supplier is accepting cXML format, OSN takes care of translating your document)
    You might want to consider these points while deciding the technology.
    Nitin S. Darji

  • Requirements Gateway and TS-Intermidiate File II

    Hi
    I have asked in this thread about the TestStand Intermidiate file.
    http://forums.ni.com/t5/NI-TestStand/Requirements-Gateway-TS-Intermidiate-File/m-p/2288998/highlight...
    At the moment I am writing my own intermidiate file generator. To keep it simple as possible i have tried to derive it from the NI's one's. One Attribute i could not explain is: "canGenerateResults" in the step element tag.
    Is it possible to tell me how this flag value is created?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Solved!
    Go to Solution.

    Hi Daniel,
    what you have descriped is the attribute: recordResult.
    but the word "sequence" pointed me to the right flag.
    The attribute: canGenerateResults ist created by.
    Sequnence Properties -> Tab:General-> Checkbox Disable Result Recoding for All Steps.
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Requiremen​ts Gateway 1.1 terminates docx processing when encounteri​ng a symbol

    My Word (*.docx) test procedure includes a symbol to denote margin around an expected value such as: "Each motor current reads 45 ±1 degree C"
    When Requirements Gateway creates the intermediate document, it terminates the creation just before the "±" symbol, so the rest of my document is not included in the file. Obviously this means my remaining covering statements are not included in the coverage analysis. Removing the above symbol is the workaround.
    Is this known behaviour?
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

    Maybe it makes a difference that it's contained in a table. Here's an example docx file and the intermediate file that was generated. Note the intermediate file stopped at the noted symbol.
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx
    Attachments:
    Test.docx ‏20 KB
    Test.txt ‏2 KB

  • Requiremen​ts Gateway OT-Script example

    Hi,
    I have written my own TestStand NIRG intermidiate file generator as a COM compontent.
    Now i would like to integrate it in NIRG via the OT-Script.
    I have created a new .br file placed a new Method inside there.
    Well at the moment i see my Teststand convert tool in the convert tool's drop-down list in types editor panel.
    Of course i am not famous with this kind of scripts.
    In the other br files there is a lot of code, but there are no comments.
    Is there a suitable example or documentation on OT-Scripts ?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Duplicated:
    See here
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-OT-Script-example/m-p/2648861
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Requiremen​ts Gateway nested requiremen​ts

    Hello,
    I'm new requirements gateway user and I wonder if I'm using it correctly.
    I'm trying to define a requirement in a doc file covered in a child document and also by child of this child.
    Example
    Top File : REQ_1                                           ​       
    Child file : { Cover REQ_1
                           REQ_11
                           REQ_12
    Child child file : Cover REQ_11
    Of course the syntax is wrong but the principle is there. I'm trying to have a REQ_1 coverage of 50% (or 66%).
    I've tryed  macro requirements but it does not seem to fit my needs. I do not want to have all low level requirements in the top level document.
    Thanks
    JF

    Hi JF,
    Unfortunately, there is no way to have a percentage of a specific requirement covered. In Requirements Gateway, either a requirement is covered or it is not. The percentage of the overall requirements covered is then displayed.
    If you don't want to have low-level requirements in the same file as the high-level requirements, you can use the MultiWord Type to specify a directory of requirement files to read in as a single Requirements Gateway document. This way you can spread your requirements amongst multiple files.
    Manooch H.
    National Instruments

  • Requiremen​ts Gateway and TestStand

    Hello,
    This one is more of a RG question but there is no RG area to post.
    I have a Word Document that defines the requirements for a test sequence.
    The requirements are covered by both
    1) LabVIEW VI's 
    2) TestStand sequence.
    What I want to do is see what my coverage of the Word Documents Coverage is.
    I've noticed that when I've added the TestStand sequence to my Req Gateway project, every entry in the TS document spawns a "derived requirement".
    Is there a way to switch this off?
    I want to link my word document to a place in the test sequence and say this is where I cover i.e. Saving the Data. I do not intend to link my TS Sequence with a Results File.
    The annoying bit is when I look at the analisys view even though my Word Document is covered 100% there still is a number of uncovered derived requirements comming fromthe TS Sequence.
    Thanks for any advice!.
    Maciej
    Solved!
    Go to Solution.

    I re - read my post and it is clear as mud...So I'll try to be clearer.
    Two issues I'm facing:
    1) Linking a TestStand sequence to a Word Document causes RG to generate additional "derived' requirement for each of the TS items ( steps or sequences ).
    I would like to switch this fuctionality off. I'm not interested in the Derived Requirements in this scenario.
    2) Please see the desired structure linkage:
    If I set up my project this way and I for example Cover 1 requirement in the word document in 3 places in the Test stanad sequence only I see the following message.
    Requirement 'REQ_ControlMotorRPM' is not covered.
    Error: Uncovered requirement
    ( Please see the Desired Structure png )
    It would seem to me that Requirements Gateway ONLY allows me to Bind One Document to One LV Project or TS Sequence.
    If I remove my LV projects from the covers dependency the requirements are covered fine and no error occures.
    In my case I have One requirements document that is adressed by a TS Sequence and 2 LabVIEW Driver Projects ... I can't seem to configure this right.
    So my requirements document has 100% of the requirements.
    Some of them will be sorted out by  the TestStand Sequence , and some of them will be sorted out by my Driver Projects , how do I configure RG so that one Spec is solved by 3 software items?
    Thanks,
    Maciej
    Attachments:
    DesiredStructure.png ‏7 KB
    WorksFine.png ‏4 KB

  • XML Gateway: produce an XML file in OAGIS format ( for Vendor Master & Inv)

    Hi Guys,
    I've requirement to produce an XML file in OAGIS format ( for Vendor Master & Invoices) under Oracle AP and PO.
    The event tringger should fire whenever new vendor/invoice entered or updated.
    Would appreciate any inputs.
    thanks.

    Not sure,you are looking for inbuild product to produce the OAG XML format, or trying to build custom one.
    If options is Inbuild Product, Oracle Exchange is yeh another product has such kind of capability. Refer this
    http://download-west.oracle.com/docs/cd/A97329_03/web.902/a88894/adx16orx.htm#1007387
    FOr second , check out these two document in metalink
    150083.1 XML Utilities
    123491.1 How To Insert XML Documents Into The Database And Validate Them Using PL/SQL ?
    Hope this will be help

  • Requiremen​ts Gateway and Doors Types

    No Requirements Gateway board but am working with TestStand also..
    I am pulling requirements from DOORS and I need to filter out a column but I cannot find a way to check that a column is NOT empty. I already made a DOORS advanced type and I am trying to edit the requirement field to filter out a column called Interface Name. I want to only pull in the rows where Interface Name is populated. I am currently pulling in useless information where the column is empty. I tried leaving the value blank and negating it to mimic a 'not empty' concept and that did not work. Any suggestions?

    Hey cframe,
    You should be able to do this by specifying that the object should have an attribute of a certain name. For example, this is the DOORS module for the basic DOORS example we provide with Requirements Gateway:
    And here is an example of how you could configure the Requirement field to only pull requirements which have a Priority specified:
    By specifying that each requirement must have an Attribute with the name "Priority", you are configuring the type to only recognize requirements which have a Priority defined.
    I hope this helps, and please let me know if you run into any trouble with it--I'd be happy to help further if this doesn't solve it.
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • Exporting LabViiew vi documentat​ion from requiremen​ts gateway to Telelogic DOORS.

    1) I have entered documentation information in to my vi and can see it in requirements gateway. When I export it ot DOORS, it gets added to the bottom of the objects in DOORS. I am useing a company template in DOORS and need my vi documentation to come into DOORS at a specific paragraph and not at the bottom of the document. Is it possible to do this?
    2) When I export to DOORS all the information from a vi "Documents" property wends up in one single object. Can I split this to two or more objects?

    Hi percy,
    Unfortunately, the export tool does not have the features you are looking for.  The tool is intended to provide a way to easily move your requirements data into DOORS with the intent that you will customize the order and organization of the data within the DOORS environment.
    Al B.
    Staff Software Engineer - TestStand
    CTA/CLD

  • Requiremen​ts Gateway OT-Script example 2.Trail

    Hi BlueOnes,
    I am still waiting for a small answer on following thread.
    http://forums.ni.com/t5/NI-TestStand/Requirements-Gateway-OT-Script-example/td-p/2648861
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Duplicated:
    See here
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-OT-Script-example/m-p/2648861
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Nothing visible on the Requiremen​ts Gateway Graphical View

    I have a Requirements Gateway project with an number of documents linked together.  There are a couple of errors as far as duplicate names, and lots of missing link, but everything displays in the Coverage and Impact view.  However when I got to the Graphical view, its blanks.  I seem to remember this occurring before, but for the life of me I can't remember how I fixed it.
    Any ideas?

    Hi Al,
    I have decided to try it with the report.
    But combining ID and Limit in the XML Report will fail.
    I opended a new thread to discuss: 
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-Identifier-Format/td-p/2338498
    btw i have looked on the NI-RG code. It seems most stuff is done in ot-scripts.
    I suppose TeststandSequenceFile generator is done in ot, too. But this script is complied.
    i have no change to look inside. Is there a reason why the compiled one is shipped while the
    Microsoft one's like Word,Excel and Access are non complied ?
    Regards
    Juergen  
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • NI Requiremen​ts Gateway - Requiremen​ts Management Software

    Hi,
    I would like to know the  "NI Requirements Gateway - Requirements Management Software"
    when it was launched?. Is the updated version available?. Would like to know about the multi licences details and price?.
    Thanks
    Kalyan

    Kalyan,
    Version 1.0 of NI Requirements Gateway was first introduced in May 2006 and is still the most current version available. 
    If you would like to know about pricing details for multi-developer licenses, the best resource is to contact your sales representive directly at ni.com/contact.
    You can also find in-depth usage of the tool discussed in these two webcasts:
    Requirements Gateway for Test, Measurement, and Control Applications
    Requirements Management and Traceability with LabVIEW and NI Requirements Gateway
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • Requiremen​ts Gateway Identifier Format

    Hi,
    this thread has it source in this one:
    http://forums.ni.com/t5/forums/replypage/board-id/​330/message-id/39779
    by using the identifier format i should be able to create my ID for requirements and references as well.
    For text files it is working well, but when i am using xml files in the reference pane it seems not working.
    It attaches only the \1  and \2 is empty and the reference is created twice. One has the nodevalue for <Low>
    the other one has the <Element> Value. 
    Is there a way to fix this ?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Hi Al,
    here is a small taylored example which descriptes my "requirements"
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Attachments:
    DemoToNI.zip ‏10 KB

  • Api for Requiremen​ts Gateway

    Hi
    When looking into NIRG's bin folder there is nirg.tlb.
    Is this a public library and is it possible to Remote Control NIRG?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Solved!
    Go to Solution.

    Hi Al,
    This morning i spent some time to the COM interface (.tbl) which is shipped with nirg.
    After some tests, i got it running in that way i liked. Open, Reload and Save Project.
    It is  working well. Only on closing i do not know the right parameter value.
    It would be nice on future releases that there is a short parameter description.
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Attachments:
    AutomateNirg.zip ‏4 KB

Maybe you are looking for