Requirement based Layout Set

Hi,
Our user has following requirements for an iview appearance.The iview (let us suppose it a km navigation iview)
is pointing to one folder.It shows all documents internal to the Folder.There should be no context menu as these documents are meant for readers not for editors (we have a different iview for editors).
The Problem is sometimes there can be folders internal to the folder, in that case we are not able to come back as there is no breadcrumb bar.Presently we are using NewsBrowser Layout.
At last I want to summarise the requirements
1) The Documents or Folders should not have context menu.
2) the list of documents should appear as links.
3) there should be breadcrumb bar available so as there are folders internal to folders + Documents and we need to come back to the Folder again.
Note: the News Browser Layout is fulfilling all the requirements apart from the fact that it is not showing breadcrumb bar.
It would be nice if we can change this Layout by adding breadcrumb bar.I have tried this by changing the Collection renderer but not success full.
Please suggest any Layout which can fulfill these requirements.Otherwise please suggest how can we create a customized Layout set for fulfilling above requirements

Go to System Administration --> System Configuration --> Knowledge Management --> Content Management --> User Interface --> Settings --> Layout set.
Search for the layout set you want to add the collection renderer to using the "Apply Filter" option.
Edit your Layout set.
When you click on edit after choosing a layout set, you will see a property called "Collection renderer" in the layout set definition. It is a table with lots of entries. Scroll down to your collection renderer and click on the checkbox next to it.
Then Save the Layout set.
This should add the collection renderer to the layout set.
Pradeep

Similar Messages

How to do changes in Layouts setting and SAP scripts to meet requirment?

hi SD gurus,
Please explain me how create and work with Z output .
where and how we do changes in Layouts setting and SAP scripts to meet the user requirments.
pls forward func spec of Z output
points will be rewarded
thanx & regards

you need ABAP skills to do this.
basically you need:
1) draw the layout on a piece of paper
2) define the fields you need and find out the corresponding SAP fields
3) check the document with the customer
4) give this specification to the developer
5) the developer will give you a program name and form name: place them in the message for the document.
Roberto

How to change the standard layout sets in ALV List

Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
Dharani

Hello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe

Layout Set not working

Hi all,
I am trying to fulfill a requirement here which is to hide the "Edit Header" control on the Banner iView. I found out that this is defined in the "Components" property in the HTML Collection Renderer Settings. When i omit the component on this property, the Banner iView hides the control. So far, so good.
Now, as i need 2 instances of the layout set (one with the component and other without) i did this:
1) Copied the layout set to a custom one
2) Copied the HTML Renderer to a custom one
3) Omitted the component on the custom HTML Renderer
4) Changed the renderer on the custom layout set to point to the new renderer
5) Copied the Banner iView and customized it on the property "Layout Setting", putting the name of the custom layout set.
And this won't work! When i use this iView, instead of showing the Banner and Title, it shows a KM navigation structure with the Images directory (base directory of Banners). Do you know what may be wrong? I am sure that the problem occurs when i change the iView property to point to the custom layout set. But what is wrong?

Hi all,
I've posted this yesterday and had no reply... can anyone help on this case? I've tried everything and nothing seems to work.
Thanks in advance!
Thiago

Layout Set: How to add a new field in a layout Set?

Hi ABAPPERS.
Question:
How can I add a new field in a layout set?
Scenario:
QC21 uses a global Layout Set ZQMECOA_GLOBAL.
There's a field required in this Layout Set which is Production Date(CAUFVD-GLTRP).
Where is the date query happening here?
Where can I insert the SELECT statement for the new field required?
I try to look at:
OPEN_FORM and WRITE_FORM, it seems that date query or SELECTION of data is not happening here.
Thanks.

If you are adding a header field then you will extend the header structure in CRM and do the same with Item structures for Item fields. You will use EEWB or similar technique in the CRM backend to extend the header or item.
These extended fields in the backed are available in customer_h or _i structures in the order object that can be read and modified in the Header BAdI or Item BAdi.
If you think that this message is cryptic or not enough, then you should search for Extension Guide in this forum and read the document.

Creating template areas when using CSS based layout

Hi:
I'm ransitioning to pure CSS based layouts. When I used tables for layouts I could select a table cell and make that an editable template region. But when I'm setting everything up in Divs, you can't "select" a div in Layout mode. Indeed, layout mode doesn't really work at all - things are shown all jumbled and you have to use Preview or open in a browser window to see how things will look. (I'm not using the grid - maybe I should?) Is there a way to select a div and make it an editable template region?
I'm using GoLive CS2 on a Mac.
Thanks!

Is this affecting ALL text on that page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"matthewtrefz" <[email protected]> wrote in
message
news:eo5o8v$aqa$[email protected]..
> We have recently performed an upgrade to our site. The
entire layout is
> css
> based. The problem we have run into is that Contribute
users can no longer
> select the content using the mouse. In fact the only way
to edit the
> content is
> to use the arrow keys on the keyboard. Though it is
possible to edit
> content
> this way it is very time consuming and confusing to most
of our users.
>
> I have tired to edit pages based on a template, and
pages not based on a
> template and get the same issue.
> What can I do to fix this problem?
>
> The web address is
http://engineering.osu.edu
>
> Thanks,
> Matthew
>

HP 8600 Officejet Pro stuck on layout setting of long-edge binding (duplex printing)

My HP 8600 Officejet Pro 8600 is stuck on a layout setting for printing of long-edge binding (duplex printing). It's conected to a mac running OSX 10.8.4 Any suggestions?
Thanks

Hi,
From the application used to print click on File and the select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
Click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
6. Set the Two-Sided option as the required binding or select Off to disable it.
Click on Presets > Save Current Settings as Preset and perform the print job... the settings will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Adding columns in Layout set of CJI5

Hi,
I am executing the transaction CJI5. In Change Layout option of the report ouput it is showing 41 columns but in the program the field catalogue has 190 fields and even the output final table has 190 fields. I am not able to view the remaining columns in the layout set.
My requirement is to display the order column in the layout set which is not visible in the column set. Can we get the column order in the layout set?

Hi,
I am executing the transaction CJI5. In Change Layout option of the report ouput it is showing 41 columns but in the program the field catalogue has 190 fields and even the output final table has 190 fields. I am not able to view the remaining columns in the layout set.
My requirement is to display the order column in the layout set which is not visible in the column set. Can we get the column order in the layout set?

Layout Set : Show Folder Content

How can i show the contents of folder in main page if i use AdminExplorer or ConsumerTreeList layout set.
What i am looking is to display the content in the main page rather than clicking on folder link which takes to next page with contents.
For e.g
Folder A                  Size   Modified Modifiedby
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
Folder B
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
I appreciate any suggestions or ideas.
Thanks
Tegala

Hi,
Prakash Singh has provided a ready to use code to have KM repository custom views. you can make modificationd to meet your requirement.
refer:
Build Your Own KM Navigation iView Using HTMLB Tree
Hope that helps.
Regards,
S.Divakar

Packing list - Driver Program and Layout set name for Smartform

Hi ,
Anybody knows about print program and Layout set name for PACKING LIST in Smartform.
Regards,
Kumar S

Hi Bhuvaneswari,
For Creating Adobe Interactive form, you need the below configuration:
Server side:
Server running on ABAP/Java stack configured with ADS
For ADS Configuration, follow the below link:
https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000894009&nlang=E
Client Side:
The required Reader version depends on your usage situation.
For SAP Interactive Forms by Adobe, we generally recommend the following:
Adobe Acrobat Version 7.0. 9 or higher
Adobe Reader Version 7.0.9 or higher
If you require forms for one of the scenarios listed below, you must use Reader 8.1.
These are:
Forms in Web Dynpro applications that are integrated at runtime using xACF (Active Components Framework) ZCI (Zero Client Installation).
Forms in scenarios that use digital signatures.
If you use interactive forms in Web Dynpro for Java and these interactive forms are included using ZCI (Zero Client Installation) at runtime, you must read Note 1055911. Note 1055911 specifies the required reader version and contains further detailed information.
Reward points if found helpful.
Regards,
Arafat

QM layout set QM_QCERT_01 for certificate profile

Experts,
I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
    o The text is only available in the original client.
    o The text is not available in either the original or the current client and should therefore be created.
System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
How do I check if the text is available in the current client? How do I add or create the missing text?
Thanks. Rgds

If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
Transfer QM Standard Texts
Transfer QM Forms.
hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element QM_QCERT_OFF_SPEC_TEXT .
This may be created in your client and assigned to layout...just check

Global layout setting

Hi experts,
I have a query on the default layout setting.
I could not create a global layout, only user specific layouts are allowed.
I found that we need to set authorization object S_ALV_LAYO with ACVT = 23 to maintain & change global setting.
But still it is not possible to create a global layout. The option with user specific is set and greyed out, so I cannot change it.
Regards,
Pri

Hi Priya,
As of Release 4.6C, authorization object S_ALV_LAYO is available with which you can control the authorization for display variant maintenance.If you would like to use or save the Excel view in your layout, you also require the additional authorization S_BDS_DS with activity 01,02,03,06,30; CLASSNAME ALVLAYOUTTEMPLATES and CLASSTYPE OT.Furthermore, there are applications that have their own authorization checks installed.
In some ALV lists, you can only save user-specific layouts. In these cases, the indicator "user-specific" is active , on a grey background and unable to be changed. This is related to the parameter I_SAVE. This controls which options you have to save the layout.To be able to define default layouts, the parameter I_DEFAULT must have the value 'X'.
Refer to SAP Note 409190 and 601803.
Thanks,
Saby..

Changing Default Layout Setting - User-specific

Dear Gurus,
This is related to general ALV Layout setting. When we choose Select Layout -> Choose Layout, the default layout setting will show All, is there any way by which we can change this to User-specific Layouts by default? (may be through some parameter id?).
Many Thanks!
Best Regards,
Sree.

Hi ,
Can you explain me your requirement in detail.
Regards,
Rohan.

Customizing parent folder link options in DiscussionForum Layout set

Hi All,
I have created a forum page with discussionForum layout set.Now, it shows the discussion groups inside it with parent folder link at the top.this parent folder link has some options like view,coolaboration,details etc which I need to customize...
By parent folder I mean like if A has x,y,z discussion groups:
If you click on x then, parent folder link changes to:
A-->x...there is a option menu just besides this link which I need to customize.
Can anyone give a clear idea to this problem??
With Regards,
Udit

Hi Udit,
Pls follow the below steps,
1. Go to sys admin> sys configuration> Knowledgemanagement --> content management -- >user interface.> settings> layout set
2. Search for Discussion layout set and open it.
3. In Collection renderer field, click on the link discussion group bread crumb
4. In the subsequent window, click on the collection command group : discussiongroupbreadcrumbcommandgroup.
5.in the next window, edit the command list field as per your requirement and save.
Pls reward for helpful answer.
Rgds,
Siva

Own Search Result Layout Set

Hi,
as following the document "How to remove the 'details' link from the search results page" (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to remove the details link from the search results page.pdf) we copied the SearchResultLayoutSet and renamed it.
Now we changed the own SearchResultCollection Renderer of FlexibleUI via the KM User Interface to fit our requirements.
To activate our own SearchResultLayoutSet we updated the file /etc/search.oth to use it instead of the standard one. It was necessary to reload the OTH with the following steps (EP6 SP2 Patch3):
- Activate UI Superusers (wdfproxy)
- Then a link Rendering Information within the Search page Results will be displayed.
- Clicking this the Debug info page opens, here the button "Reload OTH" was available.
- Clicking this, the OTH is reloaded and the new own layout set is activated.
Now, when we moved to patch 27. This procedure differs a little:
- Activate UI Superusers (wdfproxy)
- Then a link Rendering Information within the Search page Results will be displayed.
- Clicking this the Debug info page opens, here the button "Reload OTH" is not available anymore, instead there is a link "OTH Overview".
- Clicking this, the OTH overview with a "Reload" button appears.
- But clicking the reload button does not have the desired result: search.oth reloaded and the new own layout set is activated.
How can a own SearchResultLayoutSet be activated globally in the Search OTH? Is there another way with Patch 27?
Thanks,
Erik
Message was edited by: Erik Mueller

Hi Erik,
I mean it appears most likely to be an error in the
location or contents of the search.oth file. If no
errors are showing up in the log, I would guess the
modified content is not being found. I think you need
to check some of your basic assumptions. Try looking
at the oth folder as a WebFolder and verify that the
file is there and has the expected content.
Another thing you might consider is making a different
oth change that you can verify is taking place to
check whether the oth is actually reloading.
Also, if somehow the search criteria in the oth file
are messed up, then it might silently (without an error)
just not work, since, although it would be properly
loaded into the oth, the critera would never get matched
at runtime.
I hope that gives you a couple of things to try to close
in on your problem.
Regards,
Darin

Requirement based Layout Set

Similar Messages

Maybe you are looking for