Requirement for Big confe Room Facility with more mic and speeker

Hi,
I would like to know that, Cisco having any kind of product which one can provide Audio Conference, for Big conference Rooms. Minimum 5 Mics and 5 Speakers in same room. This product is possible to configure with CCM or not.
If any body knows any third party Vendor Please suggest there name.
Regards
Sunish

Hi,
Thanks for your replay.
Currently we recomented to use 7937 IP Phone. But i would like to know that is any way we can integrate with Local Party teams MIC and Speeker with our 7937 conference station
Regards,
Sunish

Similar Messages

Can you get an Apple ID for corporate use to associate with more than 10 devices?

Can you get an Apple ID for corporate use to associate with more than 10 devices?

I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
Regards.

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Whats a good mac to use for a home flight simulator with flight controls and foot pedals?

whats a good mac to use for a home flight simulator with flight controls and foot pedals?
My old 6100 AV worked great on A10 ATTACK, back in 1993.
whats a good set up now a days?
I havent seen any MAC set ups as a lot of the after market accessories are on Windows platform.
Is there a way or should I get a dedicated simulator on PC?

The fact that USB flight input devices appear to Windows only is not a limitation; for Mac most are programmed through the sim itself. I know X-Plane does that.
I've simmed a lot and know that good sims need a lot of processor and video hardware horsepower, and you'll also need a lot of RAM. They also run up the internal temps. A Mac Pro has better cooling than an iMac. You can get a program like SMCFanControl to manually set up the fans speeds before starting the sim.
I know of no sims today that will still run on a PowerPC Mac (2005 and earlier) so you need to look to an Intel Mac with top specs. If looking at iMacs, start by looking for the quad-core i7 processor. Those models usually came with an up-rated video card. Thing 12 to 16GB RAM.
My 2010 iMac has the 2.93gHz i7 processor, video hardware (ATI 5750) with 1TB VRAM, and 12 GB of RAM. It runs the x-Plane 10 demo fine but I've not bought the full version because v10 seems to make foot pedals darned near mandatory, and I don't want $100 worth of pedals under my regular work desk at the moment.

What is the best software for burning a large slideshow with 500 photos and music to DVD?

What is the best software for burning a large slideshow with 500 photos and music to DVD?

Are you talking about strictly burning an already put-together slideshow or composing one and then burning it?
My all time favorite slide show maker is Photo to Movie; you can then burn it from there or get it into iMovie and/or iDVD for the "finishing" touch. My favorite burn software is Toast, although you can use iMovie, iDVD, and Finder as well.
http://www.lqgraphics.com/software/phototomovie.php
http://www.roxio.com/enu/products/toast/titanium/

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

You can disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

TS1702 I brought iPad for my nephew logged in with my id and download iWork's which was free. Now as it was against my id I deleted the app and changed default I'd as his, now I try to install iWork's it is asking for payment though iWork's is free on thi

I brought iPad for my nephew logged in with my id and download iWork's which was free. Now as it was against my id I deleted the app and changed default I'd as his, now I try to install iWork's it is asking for payment though iWork's is free on this ipad.

That's because the free apps are already registered to your Apple ID. You can't use them with another Apple ID.

Results for my browser has prob with 1st inch and harf from new babbilon crap will not hipolink i can not sign in or register on any thing please help

results for my browser has prob with 1st inch and harf from new babbilon crap will not hipolink i can not sign in or register on any thing please help

has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!!

Should I go for a 13" retina MBP with 16GB Ram and 2.8ghz dualcore or a 15" Base model with 8 GB Ram and 2.0ghz Quadcore?

Should I go for a 13" retina MBP with 16GB Ram and 2.8ghz dualcore or a 15" Base model with 8 GB Ram and 2.0ghz Quadcore?
Strictly talking about performance/speed.
Thanks!

Hey, thanks for the response!
Heavy internet browsing and work online(30+ Tabs open at times)
Itunes Music
Iphoto video uploading
exploring Garageband
I really want this computer to last for a really long time, first-time investment in apple.
Thanks again!

Hardware Requirements for a SCCM 2012 CAS with SQL Server Remote

The hardware requirements for a CAS server with SQL Server Enterprise locally installed are:
16 cores (Intel Xeon L5520 or comparable CPU)
64 GB of RAM
1.5 TB of disk space for the operating system, Configuration Manager, SQL Server, and all database files.
Does anyone know what the hardware requirements are if SQL Server Enterprise is remote from the CAS server? It's not listed. -Shane

Even though I am going to be strung up for even saying this, I do agree there is a use for a CAS outside of 100,000 users. If you do indeed have distinct admins managing their own images and apps in remote
locations then I see the benefit of a CAS. A remote ConfigMgr console connecting to a primary site would perform poorly. Admin A at the primary site would not experience any issues but Admin B would be in for a lot of work and waiting. Any
time Admin B needed to add an app or image it would have to be copied up to the remote primary site and then distributed back down. This is not the best scenario.
There are scenarios in company merger situations (and others I am sure) where the management of both locations has not been consolidated down to one location yet and is not going to be done as part of the deployment or upgrade. If you had a 2007 environment
it is going to be very hard to convince the admin at the remote location that this upgrade is going to be a good thing for him/her. There is an option for the remote admin to RDP into a server in the primary site but the image and apps still need
to be distributed down to the remote location. During testing this can be very time consuming.
I do agree that adding a CAS adds additional complexity but in some cases such as the one I described it is the right decision.
Thank you for the reply. And i totally agree that in some cases a design like that is a necessary evil (but not by our personal wants).
We had that design with 2007 (implemented before my time), and as you predicted EU admins complained about difficulty using the console RDP-ed into a box close to the primary site. The bandwidth to and from different regions is out of scope for me so I do what
I can with what I have. We too will be moving forward with a CAS hierarchy.
Administratively the other IT depts in other regions operate on their own. I dont handle any of the EU computers on a day to day basis whatsoever, etc. We're not merging but our IT shops operate with near independence.

Is mp3 licensing required for stand alone apps created with Flash Builder?

I've been writing some interactive educational software in ActionScript that utilizes Adobe AIR and plays mp3 files to communicate/instruct the user. I was wondering if I would need to pay mp3 licensing fees based on what I found at mp3licensing.com
I wrote to the folks at mplicensing.com and got the following question in reply:
Will the software itself include mp3 decode (playback) capability, or will it be using the decoder provided in Android. If the software doesn’t include mp3 code itself, but simply includes mp3 files for playback by the hardware device mp3 code, than you would need our content distribution license, not our electronic gaming license.
If this is true, then it may be that no license is needed at all, since we exempt from the need for our license any entity with mp3 revenues below USD $100,000 per year.
I responded:
I am writing this software in ActionScript using Adobe Flash Builder to create a stand alone application that will be bundled with Adobe AIR and use Adobe AIR to run. AIR supports Android, iOS, PC desktops, and Macs.
they replied:
I am not sure if AIR will play .mp3 files. If it does, and your code does not have mp3 encode or decode functionality, and AIR is simply used to play the content, and your revenues do not exceed USD $100,000 per year, our license is not required.
My question now is: Does Adobe AIR use the decoder provided in Android or does it have it's own decoding code? Are we subject to the licensing fees for games, etc when distributing programs that play MP3 files using Adobe AIR?
Thanks,
Robert

That site helps a little bit, but not totally. My existing server is Windows 2003 with 5 CALs included, and it works, though not because I understand the head-spinning details of Microsoft licensing. For example, I have no idea if I am actually
using the CALs, since the only thing ever done on that server (aside from web, email, and FTP) is me logging in by RDP to administer it.
I never considered 2008 Web edition because I might want to install something like the Access GUI, and the Web edition seems to forbid that. It was not clear if you could install third-party ftp server or mail server also. Web edition was a mysterious
product and is not my reference point.
It would be nice if Essentials could run a web server, since it's cheaper and simpler in terms of licensing. But nowhere is that stated yea or nay.
If I buy 2012 standard, do I need to spring for 5 CALs also? I need to administer by RDP, and have the other server drop backups onto the disk of the new one.

FM required for setting the message body with values from table

Hi all,
I have a retq wherein in tcode VL31n when i create the IBD,after saving the document,i need to send a mail to few people in the FI dept with the foll deatils:
Inbound delivery no.
A. Bill of Lading no.
B. Bill of Lading date
C. No. of containers
D. Invoice no.
E. Invoice date
F. Supplier name
G. Vessel name
H. Name of the receiving port
I. Final Destination,,
J. Expected date of arrival
The method used is SAVE_AND_PUBLISH_DOCUMENT.i get all these deatils in the table it_xlikp.But is there any FM by means of which i cna read these values and set the message body with these values and send this as a mail using the FM SO_DOCUMENT_SEND_API1?Full points will be awarded..Any help is appreciated..
Regards,
Disha.

HI Disha
Check out these links. They will surely help
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju

Total Bandwidth requirement for 720p 30fps video call to mcu 5300 and P2P call

Hi All,
One of customer purchased 5300 MCU VCSC and VCSE from us.
All infra will be setup in their HQ and all endpoints are from internet. All endpoints will register to VCSE.
customer requirements are 5 concurrent encrypted calls to MCU with 720p 30fps and point to point 10 concurrent encrypted calls.
endpoints are cisco c series endpoints and polycom HDX endpoinds.
They haven't subscribe the line yet. we need to propose the minimum bandwidth requirement to customer.
1) what is the minimum bandwidth requirements to achieve 720p 30fps encrypted call to MCU?
2) what is the total bandwidth requirements for 5 concurrent encrypted calls to MCU?
3) what is the total load of bandwidth requirements for 5 concurrent encrypted calls to MCU and point to point 10 concurrent encrypted calls?
Thanks advance for you answer!

point to point 10 concurrent encrypted calls?
Even with a miltisite license installed on the codec to enable the built in bridge on the endpoint, you're only going to be able to connect up to 3 sites max, the endpoint hosting the conference that has the multisite option + 3 others. You'll have to rely on the MCU to host these conferences.

Procedure for creating Recording in LSMW with header data and line item

Hello Friends,
I have to do the Initial Upload of Model Service specification using LSMW ( Recording).
Transaction : ML10
The problem i am facing is that i have been given 2 files one with HEADER data and the other with LINE ITEM(Service data).
Can we use the RECORDING method to upload 2 files?
If not possible how do we proceed.
Thanks and regards
Ashish Naik.

Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Letu2019s have a look at the BAPI first, before proceeding to the LSMW:
1.     Go to Transaction BAPI
2.     Click on Search Button
3.     Enter the value u201CBUS2012u201D and select u201CObj.type(Technical Object Nameu201D
4.     Press ENTER
5.     Following screen appears:
6.     On the left side of the screen, Expand the u201CPurchaseOrderu201D.
7.     Select u201CPurchaseOrderu201D and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. u201CIDoc Inbound Processingu201D screen appears. Enter the required details as shown below:
6. Click on u201CActivate IDoc Inbound Processingu201D.
7. Click on u201CYesu201D when prompted for u201CActivate IDoc Inbound?u201D
8. Hit on u201CBacku201D to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 u201CMaintain Object Attributesu201D and select u201CExecuteu201D.
11. Select the radio button u201CBusiness Object Methodu201D and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 u201CMaintain Source Structuresu201D and click u201CExecuteu201D.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on u201CCreateu201D again to create the child structure. Following popup appears:
Select u201CLower Levelu201D and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 u201CMaintain Source Fieldsu201D and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 u201CMaintain Structure Relationsu201D and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step u201CMaintain Field Mapping and Conversion Rulesu201D and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 u201CMaintain Source Filesu201D and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step u201CAssign Filesu201D and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step u201CRead Datau201D and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step u201CDisplay read datau201D and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select u201CConvert Datau201D.
25. Return to the main screen and select u201CDisplay Converted datau201D.
26. Return to main screen and select u201CStart IDoc generationu201D.
27. Now select the step u201CStart IDoc Processingu201D on the main screen.
28. Return to main screen and click on u201CCreate IDoc overviewu201D. Here the data record and status records of the IDoc could be viewed:
Check this. This may help

Requirement for Big confe Room Facility with more mic and speeker

Similar Messages

Maybe you are looking for