Requirement for getting the VAT Taxes automatically from the vendor invoice

Dear All,
We Have a Requirement for getting the VAT Taxes automatically from the vendor invoice in to the Sales invoice after invoice verification process.Is this feasible?. Can anybody explain how this can be done to overcome this issue.
Thanking you,
Best regards,
R.Srinivasan

hi,
technically i do not think tht can be done. but even from functional part its incorrect in the sense tht the values on which tax is calculated in purchase may be very different from tht in sales. so we may never get the correct picture.
saurabh

Similar Messages

  • Requirement for getting the Inventory at a daily level (Non-cumulatvev KF)

    Hello All,
    Kindly provide ur suggesstions on the issue mentioned below:
    We require the Inventory data at a daily level. Also we require that the non-cumulatve Key Figures such as 0TOTALSTOCK, etc. be available to us in the BW itself, since this is required for further processing.
    PS: Right now we are using RSCRM_BAPI to execute the qurey and store the data into a table, but it fails for non-cumulative keyfigures. Kindly suggest if ther are other ways which can suffice the requirement mentioned above.
    Thank you.
    Regards,
    Kunal Gandhi

    Hi Kunal,
    I've just answered your other post about the same issue. You shouldn't open 3 threads with the same question.
    If there is something that is not clear, you can just reply there.
    Regards,
    Diego

  • Can Audit Vault be used for getting detailed read type information from the siebel database?

    Can Audit Vault be used for getting detailed read type information from the siebel database?

    Kramer wrote:
    saurabh wrote:
    check below cmd to see where archive are generated.
    SQL> archive log list
    And also check the following
    SQL> select flashback_on from v$database;
    Hi
    Here is the out put
    SQL>  select flashback_on from v$database;
    FLASHBACK_ON
    NO
    SQL>  archive log list
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence     11
    Next log sequence to archive   12
    Current log sequence           12
    The flashback is not enabled. But archive log list shows archive destination is specified to use_db_recovery_file_dest.  And I checked the log_archive_dest_10 still empty
    Flashback off or on has nothing to do with it. 

  • My MacBook Pro got wet and I lost all of my childs photos from the day she was born. Is there anyway I could get these pictures back from my iCloud? I actually care more for getting the photos back than I do my laptop. Please help! Thank you!

    My MacBook Pro got wet and I lost all of my childs photos from the day she was born. Is there anyway I could get these pictures back from my iCloud? I actually care more for getting the photos back than I do my laptop. Please help! Thank

    Welcome to the Apple community khnkOliver.
    I assume these photos, or at least not all of them weren't in photo stream.
    You should be able to recover your photos from a back up.

  • If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

    If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

    If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

  • FM for getting the logical file name

    Hi,
    is there any FM for getting the logical file name.
    Thanks
    Vikranth

    Hi,
    CONSTANTS: c_mask          TYPE char9      VALUE ',.,..'.
          Pick up the file path from the application server
    FORM f1001_browse_appl_file .
      DATA:  lcl_directory  TYPE char128.
      lcl_directory  = p_direct.
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = lcl_directory
          filemask         = c_mask
        IMPORTING
          serverfile       = p_f2  " Parameter File
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
       MESSAGE e000(zmm) WITH text-039.
       flg_app = 'X'.
      ENDIF.
    Then use  OPEN DATASET for data reading
    Hope this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • Using JCom for getting the user name

    I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html

    Hi.
    You might have better luck posting this in teh jcom newsgroup.
    Regards,
    Michael
    Manoj Gupta wrote:
    I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html
    Michael Young
    Developer Relations Engineer
    BEA Support

  • FM for get the week number

    Hi experts..
    I need a FM for get the week number...
    for example today 14 april 2010 is the  15 week from the start of the year..
    best regards
    Marco

    Hi,
    Check this Fm : GET_WEEK_INFO_BASED_ON_DATE .
    Just enter the date
    the week parameter returns the year and week number. the last 2 digits give the week number.
    Thanks.

  • Requirement for getting 'Powered By NetWeaver' certificate

    Hi,
    We are planning to get 'Powered By NetWeaver' certification for one of our application.
    We would like to know, whether the application should support the multiple database.
    Is this a mandatory requirement for getting 'Powered By NetWeaver' certification for the application?
    Please let me know.
    Thanks and Regards,
    Rangaraj

    check out the following link for details
    https://sdn.sap.com/sdn/developerareas/netweaver.sdn?page=pbnw_welcome.htm
    Regards
    Raja

  • What are the steps to me followed to get the vendors from R/3 to SUS

    I have created a SUS Vendor Organization structure using PPOCV_BBP.
    In BD14 I have replicated a vendor from MM(R/3) system to SUS. But i am not getting the vendor when i go to PPOCV_BBP..
    I think it is showing some error MESSAGE_TYPE_X runtime error..
    One more issue is that when i test the service (SRMSUS) the portal is not opening..
    Can anybody guide me..

    Hi
    1) To check the vendors replicated, you should check PPOSV_BBP or PPOMV_BBP.
    PPOCV_BBP is used to create the root organization.
    2) SLG1 can be used to check errors in replication, if any
    3) For more details on necessary configuration for vendor replication, pl check config guide for 'Plan-Driven Procurement with Supplier Integration' in http://service.sap.com/ibc-srm
    This document is for SRM40. Most of this document is still valid in SRM50 also (except Vendor group concept i.e. PPOMV_BBP etc special txn for vendors is from SRM50) .
    Best regards
    Ramki

  • For getting the back date

    dear all,
    i want to display 10 days back date from today date
    like sysdate - 20 days back date.
    please send me the query for getting the date of back
    Thanks in advance

    Hi do you want all the dates from the back date to sysdate or only the particular back date
    SQL> select sysdate from dual;
    SYSDATE
    22-JUN-09
    SQL> select sysdate-10 from dual;
    SYSDATE-1
    12-JUN-09or if you want all the back dates starting from one particular then
    SQL> select sysdate-10+level from dual
      2  connect by level<=10;
    SYSDATE-1
    13-JUN-09
    14-JUN-09
    15-JUN-09
    16-JUN-09
    17-JUN-09
    18-JUN-09
    19-JUN-09
    20-JUN-09
    21-JUN-09
    22-JUN-09
    10 rows selected.Edited by: oracle_for_dude on Jun 22, 2009 12:11 PM

  • Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    This question has already been addressed in this thread:
    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
    John M
    National Instruments

  • Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Hello,
    Exactly which USB device are you referring to? Is the device a NI product?
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
    Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
    Swapnil P.
    National Instruments Engineer

  • Function module for getting the partner details and Classifications

    Hi,
    Can any one tell me FMs for getting the Partner Details and for getting the characteristics associated with an equipment??
    Thanks

    Hi Anu,
    are you talking about the SAP Business Partner???
    Well, if yes, then just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
    Or just search for oher FMs with BAPI_BUPA*.
    Hope this helps...
    Ciao Bernhard

  • Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Find the attachment(LV8.5) for local machines. 
    You can use shared variables to monitor the remote machine's usage.
    Attachments:
    Task Monitor 85.vi ‏25 KB

Maybe you are looking for

  • How to create Custom WEB ADI using API Only for both Dowload/Upload process

    I am able to create custom WEB ADI using API for upload process. I have written the following code to create custom WEB ADI using API for upload process. DECLARE v_application_id NUMBER:= 20003; v_object_code VARCHAR2(255):='WEBADI_API_DEM_17'; v_int

  • Content getting cut off at the top on my mobile Firefox

    Hi - after the most recent update to my mobile Firefox browser (on a Galaxy GT-19300, running Android 4.1.2) its started to cut off the top of my content on certain websites I've built using a full screen background slideshow: www.seanalexander.tv ww

  • I have Aperture 3 on my MacBook Pro..

    Can I move it to an external hard drive without loosing all of the photos and the use of it?

  • Making a link hover background

    I have a side navigation with six links. To each link I assinged a different class so it could have a separate background. (I used background images instead of making the links themselves into images, thus making the site easier to read for the visua

  • Reverse DNS nslookup error

    Hi, I am trying to configure a DNS server on OEL 6 U2 on virtualbox. I can make forward nslookup work but reverse nslookup fails with 'connection timed out; no servers could be reached'. Below is the information from my setup files. hostname_ [root@o