Requirement for installing Oracle EBS on virtual environment
Hi
I have a server with oracle Linux 5. We have the requirement to install oracle EBS 12.1.3 in a virtual environment.
for which I have downloaded the VM template files for x86-64 processor as matched to my server configuration.
So how should I go with visualization.I have checked a few things over the net which says about Oracle virtual box, oracle virtual Server, oracle virtual manager.
I am in confused state what to consider to do visualization.
first time I am handling this visualization in my career.
Thanks,
Charan
Edited by: charanjaitu on 24 Apr, 2013 3:10 PM
Hi;
Please review:
https://blogs.oracle.com/stevenChan/entry/oracle_vm_templates_available_for
Also see:
Demo Vision Installation of Oracle EBS R12.1.3
Regard
Helios
Similar Messages
-
Minimum system requirements for installing Oracle Application Testing Suite
Hi,
Can anyone tell me what are the minimum system requirements for intalling Oracle Application Testing Suite?
Thanks in AdvanceFrom the release notes (12.1.0.2).
System Requirements
Oracle Application Testing Suite has the following system requirements:
4
3.1 Oracle Functional Testing/OpenScript
Oracle Functional Testing’s OpenScript scripting platform has the following system
requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008
■ Memory: Minimum 1 GB
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 4 GB minimum
■ Browser: Internet Explorer 7.x, 8.x., 9.x and Firefox 3.5/3.6, 6.x
3.2 Oracle Load Testing
Oracle Load Testing has the following system requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2. Oracle Enterprise
Linux 5.1, 5.2 64, 4u8.
■ Memory: Minimum 2 GB.
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 10 GB minimum free (at least 3 GB free on the system drive)
■ Browser: Internet Explorer 7.x, 8.x, 9.x, Firefox 3.5/3.6, 6.x
■ Database: Oracle EE 10g or 11g, XE 10g
■ Application Server: Oracle WebLogic 11g (10.3.5.0). Oracle Application Testing
Suite requires the standard WebLogic Server installation (which includes jrocket
jdk.). It does not support generic versions of WebLogic Server installation (such as
those that use wls1035_generic.jar).
■ Oracle Load Testing Agent also supported on Linux 32-bit & 64-bit, in addition to
Windows 32-bit and 64-bit operating systems listed above
Note: These are minimum requirements only and actual
requirements for the Oracle Load Testing Server will vary depending
on the size and configuration of your load test. If you are running
larger load tests, of greater than 1000 Virtual Users, you should
consider deploying Oracle Load Testing on a faster server class
machine with additional RAM recommended.
Note: Oracle recommends running the Oracle Load Testing Server
and Agents on separate systems for production load testing. The
amount of memory required on the Oracle Load Testing Agent
systems may increase based on the number of Virtual Users that will
be assigned to run on each Agent. For more information, visit the
QA/Testing Technology Center on Oracle Technology Network or
contact your Oracle representative.
5
3.3 Oracle Test Manager
Oracle Test Manager has the following system requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2. Oracle Enterprise
Linux 5.1, 5.2, 4u8.
■ Memory: Minimum 2 GB.
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 10 GB minimum free (at least 3 GB free on the system drive)
■ Browser: Internet Explorer 7.x, 8.x, 9.x, Firefox 3.5/3.6, 6.x
■ Database: Oracle EE 10g or 11g, XE 10g
■ Application Server: Oracle WebLogic 11g (10.3.5.0). Oracle Application Testing
Suite requires the standard WebLogic Server installation (which includes jrocket
jdk.). It does not support generic versions of WebLogic Server installation (such as
those that use wls1035_generic.jar).
3.4 Additional Notes
The following are additional notes about system requirements:
■ The ATS installer can automatically install and configure an Oracle 10g Express
Edition (XE) database for use with Oracle Load Testing and Oracle Test Manager.
Although this is useful for demos, for production usage switching to Oracle's 11g
Enterprise Edition database is highly recommended. Oracle 11g Standard Edition
and Oracle 10g EE or SE are also supported.
■ System memory requirements do not take into account other processes that may
be running and using memory on your system, reducing free uncommitted
memory available.
■ When installed on the same machine, Oracle Load Testing and Oracle Test
Manager will run on the same server and use shared system resources. Oracle
Functional Test/OpenScript is a separate application that have its own memory
and CPU requirements.
■ The ATS products will run in 32-bit compatibility mode when installed on 64-bit
operating systems. It is possible for Oracle Application Testing Suite to be installed
on an existing WebLogic server. However, if the pre-installed WebLogic server is
JRockit plus WebLogic (64-bit) environment, some functions in Oracle Application
Testing Suite will not work properly. Oracle Application Testing Suite can be
installed on a 32-bit WebLogic, but not a 64-bit.
■ The legacy Oracle Functional Testing, VB-based scripting platform and associated
components (such as Job Scheduler) are no longer included with the ATS installer
Note: These are minimum requirements only and actual
requirements for Oracle Test Manager will vary depending on the
quantity of test assets stored and number of concurrent users
accessing the application. If you have a large quantity of test cases,
requirements or issues stored and/or are deploying Oracle Test
Manager for a team greater than 10 users, you should consider
deploying Oracle Test Manager on a faster server class machine with
additional RAM recommended.
6
starting with version 9.2. Customers that still require this product should -
Implementations of Oracle EBS on virtualized environment
dear experts
our company wants to implement Oracle EBS R12 on virtualized environment .
is any one of you ever did such implementation or worked in such environment ??Some virtualization technologies are certified with EBS - pl see these MOS Docs
Certified Oracle Solaris and SPARC Virtualization and Partitioning Technologies for Oracle E-Business Suite [ID 1234632.1]
Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12 [ID 465915.1]
Support Position for Oracle Products Running on VMWare Virtualized Environments [ID 249212.1]
HTH
Srini -
Db size for installing oracle vanilla
HI,
can u please guide me the db size required for installing oracle vanilla
and also provide the document for the same
Regards,
praavanuser8646564 wrote:
HI,
can u please guide me the db size required for installing oracle vanilla
and also provide the document for the same
Regards,
praavanHow long is a string?
How deep is a hole?
How much will it cost to build a bulding?
The size of the db is highly dependent on how much data you store in it.
The installation guides (already mentioned) will specify minimum prereqs. -
INSTEAD of Trigger View for an Oracle EBS New form development
Hello,
I am developing a new EBS form based on a database view.
This form is an EBS form will run in an 11.5.10.2 environment and developed using 6i.
The form has one data block that is based on the view. The view is joined and based on following tables.
Hz_Parties Hp,
Hz_Cust_Accounts
Hz_Cust_Acct_Sites_All
Hz_Party_Sites
Hz_Locations
Ra_Salesreps_All
Hz_Cust_Site_Uses_All
Ar_Vat_Tax_All
xx_custom_table t
The view is inherently not updatable. Therefore, I am thinking to write an INSTEAD OF trigger on the view. The question. The form which is based on the view is require to update Oracle EBS tables mentioned above. As you know, there are APIs available to update above tables.
Typically, you would write API in a program unit in the form and call from triggers. But here the form is based on the view. And to support DMLs on the view, I HAVE TO write INSTEAD of trigger(or that is the only way i know) so the question is:
1. Do I write these APIs under INSTEAD of triggers?
2. Or, I write these API in the form triggers and write DML referencing OLD and NEW values in INSTEAD of trigger? Where, these OLD and NEW values will refer on above tables.
Please advise.
And lastly, Do I have to write an INSTEAD of trigger? The USER_UPDATEABLE_COLUMNS view for this table shows no columns are updateable at the moment
Thanks,
AAs you know, there are APIs available to update above tables.No, I don't B-) You'd better ask this in the eBusiness Suite form, as this is very EBS, not Forms, specific.
In general, I would say that in this case you can use the EBS API's in the instead of trigger, not in the form.
Or you can base the form on stored procedures, not directly on the view. -
Oracle apps configuration required to install oracle lite database
Hi,
Can any one suggest me the oracle apps setups and configuration required for installing the oracle lite databse in my laptop.
The olite databse must sink with my existing oracle apps.
thanks in advance...user596857 wrote:
Dear Experts, (I'm far from expert, but I possess enough shreds of knowledge to answer your question, so here goes. ;-) )
1a)
My server has Oracle version 11.1.0.6.0, but the matrix says it wants 11.1.0.7.
I should get a warning right?
Can I just proceed with the install, over-riding the warning?
1b)
If so, what is the procedure to install into the existing database?
It wasn't obvious in the (150 page) install docs. The EBS install delivers its own ORACLE_HOME for the database. There isn't an option to install into an existing database as far I know. The installer will ask where to put the new ORACLE_HOME for the EBS database. You might get a warning if you try to install to a pre-existing ORACLE_HOME, and I don't recommend ignoring that warning. The result will either be ugly immediately or, even worse, ugly later when it's harder to figure out why. ;-)
Do an upgrade?Won't really help. The ORACLE_HOME that's bundled with the installer usually comes with additional patches pre-installed, as well as EBS-friendly configuration options. You're much better off taking what it gives you so you can get down to the real fun of learning EBS. :-)
Or, do regular install, but not Express/Rapid Install?I recommend doing a Vision install for learning EBS.
Can I choose not to install the database software?Nope (unless my memory is really that bad), and there's no real benefit to doing so. All you'd save is a couple GB of disk, and as a percentage of the total install footprint of EBS, the database ORACLE_HOME is relatively tiny.
Regards,
John P.
http://only4left.jpiwowar.com -
Pre installers for installing Oracle Utilities Application Framework V4.0.2
is there any pre installers for installing Oracle Utilities Application Framework V4.0.2 for Meter Data Management V2.0.0 Multiplatform??
reply me asap.
regards
vijayaIt would help if you provided osme basic information like what version you are installing, what operating system, 32 bit or 64 bit. We may like to help but we are not mind readers.
If you happen to be installing one of the latest versions of the framework (CC&B FW 2.2 SP 8) there is an issue.
You may have to start off with hibernate 3.2.5 then run the framework installation.
This may not do a full install but you may find that only 1 or patches have not been installed and the issue is that these require hibernate 3.2.7
So go back and install the hibernate 3.2.7 and change the environment variables to point to the new version.
Re-run the framework installer.
You may get errors in that the patches that did not previously install properly cannot be installed.
This is because they have entries in the etc/installed_fixes.txt file.
edit the etc/installed_fixes.txt file and delete the patches that will not install.
re-run the installer now and the rest of the patches should now install
The 2 offending patches may be 9384543 and 9080333. -
Hardware requirement for install PI 7.3
Hi, Expert,
Does anyone can tell me what is the hardware requirement for install PI 7.3 ( full version)? Disc space and RAM, etc. Does installation also need Oracle database to be installed as well? If not, where does PI store payload data?
Thanks,
CharlesHello
The installation/planning/size guides etc are available from:
http://service.sap.com/instguides
-> SAP NetWeaver
-> SAP NetWeaver 7.3
Further information on 7.3: SAP NetWeaver 7.3
Regards
Mark -
RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003
Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein -
Can we install Oracle XE on virtual private server?
Hello,
Is that possible to install oracle on the virtual server?
Thanks & best regardsI have a dedicated server and installed virtual private servers on it through virtuozzo
vmware and xen are hypervisor but we use kernel level and all vps use the same kernel
will it work in this scenario?
i've manage to install oracle-xe on vps, but its not starting. giving error "ORA-27101: shared memory realm does not exist"
i think this error comes in two secnarios
1. oracle environment paths not set eg.(ORACLE_HOME/SID) but they are set very well
2. oracle not getting enough memory to start, i've tried allocated 4gb of ram to the VPS but still not worked, may be the problem due to unavaliability of SWAP space on VPS.
can some one give any idea on this ?
thanks in advance
Edited by: Raakh on Jan 28, 2009 8:21 AM -
Error Message: First Install Oracle EBS. Can somebody help?
I tried to install EBS, the apps check and found some errors that I need to fix before it can proceed. I tried to fix everything, re-run the installation and now I always got message:
"No install actions have been found for this machine. Continue on to other uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
How to solve this?The error message says: "No install actions have been found for this machineCould you please check the installation log file?
How do I clean previous failed installation?Check Note: 107961.1 - How To Clean Out A Previous Oracle Applications Installation On Windows
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=107961.1
I want to install Oracle EBS 12, on Windows 2003 ServerCheck the following thread:
Oracle E-Business Suite R12 Installation on Windows 2003
http://forums.oracle.com/forums/thread.jspa?threadID=484238 -
Hi, Expert,
We are planing to install PI and are totally new to it. Now we are asked about what are our requirements for install PI? Can anyone give some ideas on it? We are on the stage to install PI for development, not for production yet. Also, we better ask for PI 7.1 or PI 7.3? Is NWDS or CE included in the PI package? Thanks,
Charles.Thanks for everybody's input.
Actually I am the client who wants to install PI and am asked by consultant about the requirements. I have read the links provided and still not sure what kind of requirement we need to have.
From reading the documentation, I think PI7.1 has its own package and can be upgraded to PI7.3, while PI7.3 has to go with SAP Netweaver 7.3 package which includes PI, BI, SAP Portal, Web dynpro etc. PI7.1 package includes NWDS. But CE is not included in PI7.3. Please correct me if I am wrong.
We are going to migrate our current non SAP system to new SAP system and use PI to integrate local legacy system, 3rd party system with SAP system. Mostly we are going to use Idoc and web services, and may some of ABAP or JAVA proxies. So I think our requirement could be:
SAP PI 7.1 + EHP1 + advanced adapter engine + Oracle database. AS JAVA and AS ABAP would not be needed. Would that be enough for us development instance?
Please keep input.
Thanks,
Charles -
Patches required for installing the configuration management workbench?
Hi Team,
Please list all patches required for installing the configuration management workbench in Oracle Apps version 11.5.10.2 ?
Please let me know.
Thanks,
Suman V.Hi;
I also suggest to check:
How to Configure the Oracle Configuration Manager with Support WorkBench [ID 1174943.1]
Regard
Helios -
Laptop config for installing oracle apps
Hi All,
what could be the best config and brand for installing oracle apps in laptop for learning purpose? Will oracle apps supports Windows Vista as most of the current laptops has Vista as the default OS?
I have tried installing oracle apps in desktop and not in laptop yet.I found in the net the below steps is one of the ways to install oracle apps in laptop.
1.Install VMware on windows OS (Virtual Machine)
2.Install enterprise linux
3.Install oracle apps
Pls let me know if anyone have installled oracle apps in laptop.
Thanks in advance
kumarHi Kumar,
Yes, for learning Vista/VMWare/OEL/Apps would work, but note VMWare not supported on Vista but it does run (boot using Disable Driver Signing) and you might find Linux VMs take 20-30mins or so to start the first time after host boot. Also I'd turn off the Vista frilly bits!
Specs - get something recent, the better hardware the faster it runs! For Vista and R12 on VMWare I'd say you'd want 4GB memory, fast dual core CPU and tons of disk. Also you'll want Vista 64 to get the best out of the memory (and if you want more than 4Gb). Some laptop brands come with options for different OS's like images on DVD or hidden on the harddisk that you can easily reinstall.
PS. Laptops are like desktop's these days, not a huge difference in specs...
PPS. If you want a less painful option try to downgrade to Windows XP (watch memory limits), still lots of hassles with Vista.
PPPS. I'd go for OpenSuse (Suse clone) or Centos (RedHat clone) over OEL for learning machine due to no subscription for updates, etc.
Drop me an email if you want.
Regards,
Gareth
http://garethroberts.blogspot.com -
Best practice for install oracle 11g r2 on Windows Server 2008 r2
Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira
Maybe you are looking for
-
How do you change the font color in CALL-OUT text boxes in PRO XI?
How do you change the font color in CALL-OUT text boxes in PRO XI?
-
No entry sign on reinstalled Address Book
I have reinstalled address book (after deleting it for reasons I can't recall). It has contacts in it and opens up fine but a) there is a "no entry" sign when I open Applications as a stack and) b it doesn't sync with my iPhone 4, though everything
-
Multiple MobileMe accounts – Set the one used for publishing Photos & Video
I'm running OS 3.0 on an iPhone 3G S. I've configured two MobileMe accounts, both Mail only (no Calendar, no Contacts). MobileMe account 1 is also the default email account as of Settings. However: When I use one of the sharing features in the Photos
-
Programmatically creating a page with portlets in it
Hello! I need a little help figuring out how to programmatically create a page and add a couple portlets to it. I have figured out how to create the PageDefinition and that code works great. How can I add 2 portlets (the portlet definitions already e
-
Yesterday I updated the iTunes software to version 7.0.2. Since that update I have not been able to access the Music Store. A message pops up stating "Could not complete Music Store Request. The store may be busy." All other internet access routes on