Requirement for Pricing - When region is AR
Hi Gurus!
I have done this before so wanted to get some help on this "Requirement for pricing". I need to create a new Pricing requirement . Basically a new condition table A123 has been created for Access Sequence ZSDR and I was asked to create a new requirement for pricing for sme which teh SD people would fill the requirement number that I create in that. This required for a partcular region "AR', which I believe is that when the region is 'AR' this prcing requiremnt should folow. I am not sure at all as how to go about and would require you help if someone has done tihs type of thing before.
The details that I ahve been given are as follows:
Key conbination : Sales org/ material group 4/Customer
Below are the required fields for this transaction
Sales Org u2013 CA03
Material Group u2013 ZTR
Valid On u2013 defaults to todayu2019s date
Customer
I need to create a new Pricing requirement with this. Could someone please help me out with this?
Thanks,
I have been able to create a new requirement under the pricing and numbered it 927. Then I activate it and after that I ran the program RV80HGEN to activate all the routines. It says there is no main program for the routine RV61A927. I even checked the include program RV61ANNN and it does show my new routine there but above that it does not show in the Function tgroup that it exists. Is there a way I can activate it or include it so that it gets attached to the main program?
Thanks
Similar Messages
-
Requirement for Alert when outbound idocs are failing
SAP A -
IDOCS -
> SAP B
We currently have a SAP A system sending outbound idocs to SAP B system via ALE. The current issue is when SAP B system is down. The outbound idocs being sent from SAP A system fail.
We want to get a alert when the System B is down.
What are the options available in SAP to achieve this requirement.
Thanks in advance for any inputs that will be provided.
Regards,
Chandra KumarDear Chandra,
The logical solution to the problem is as below,
You need to have a Function module which checks the RFC connections between two systems before sending idoc. If the connection is found OK then the idoc should be send else a Alert message should be raised u201CSystem B is down, idoc can not be processedu201D
Please let me know if this solution helped in resolving your query.
Regards
Dinesh -
OLM-Updating requirements for LP when person type changed to ex employee
Hi,
When the person type changes to Ex employee and enrollments still exists (which have not yet been completed) the following error message shows up.
USER DEFINED EXCEPTION IN PACKAGE OTA_DELEGATE_BOOKING_SWI PROCEDURE UPDATE_DELEGATE_BOOKING
when trying to update the enrollment status to Attend for those people who were part of a Learning Path subscription list. On other cases (employee is not a subscriber to a LP) the enrollment can be completed (Attend).
Has anyone experience this issue?
Best regards,
RobertoNavigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.
-
System requirements for hardware when using one server and 9 terminals?
Hi, in our school there are 9 terminals connected to one Multipoint server 2011 (CPU: Intel xeon e3-1226v3 8M cache, 3.30GHz, 32RAM).
In my opinion the choice of hardware is not suitable for so many terminals.
The question is:
What hardware do we need if our students worked with those programs in the same time - Corel Draw, Photoshop, ect.
Thank you!Photoshop can be a bit pig heavy. The CPU you are using is only Quad Core and NOT Hyper-Threaded.
A bit underpowered for that many users on that App IMHO.
Also, are the clients direct connected, USB, or RDP ?
If you want to keep that machine in service, you could get another identical box and split half the users to the new one.
If you really want them all on the same box, I would prob replace the current one with something like a Lenovo TD340. Config with at least a single 6 Core XEON CPU, or Dual Quad XEON w/ Hyper-Threading, 64GB Memory, NVidia Quadro K4000 ( If there are any
direct connections ) and at least 2 10k SAS HD's. Preferably 4x 10k SAS HD in RAID 10.
SpecSheet
http://www.lenovo.com/images/products/server/pdfs/datasheets/thinkserver_td340_ds.pdf -
Hardware requirement for Solaris 10
Hi,
Im seeing different requirement for memory when installing Solaris 10, and i was wondering if the following is correct:
Minimum:64
Need for GUI: 256
So is it correct that you can install solaris 10 on a sparc og x86 with 64mb ? i guess it is only text then....
OleHi,
The minimum requirements are:
# Minimum of 256 MB of physical RAM (or 512 MB for PXE booting)
# Minimum of 2 GB of available hard drive space
There are more details available at:
http://www.sun.com/software/solaris/specs.jsp
Take a look at the Hardware Compatability Link at the above link to check if the x86 system that you are using is supported, and what its individual requirements are.
Hope this helps -
How to fix SOAP Security Header UsernameToken is required for operation?
hi all,
can somone help me how to resolve the error "javax.xml.ws.soap.SOAPFaultException: SOAP Security Header UsernameToken is required for operation" when i run a client.
i got a WSDL and using wsdl2java i generated the stubs
Here is my client code
public final class LiteratureClient {
public final static QName SERVICE = new QName("http://siebel.com/asi/",
"Literature");
public final static URL WSDL_LOCATION;
private LiteratureClient() {
static {
URL url = null;
try {
url = new URL(
"file:c:\\reprintwsdl\\http___siebel.com_asi__Literature17.WSDL");
} catch (MalformedURLException e) {
System.err
.println("Can not initialize the default wsdl from file:http___siebel.com_asi__Literature17.WSDL");
// e.printStackTrace();
WSDL_LOCATION = url;
public static void main(String args[]) throws Exception {
System.out.println(WSDL_LOCATION);
Literature obj = new Literature(WSDL_LOCATION, SERVICE);
DefaultBindingSpcLiteratureSpcWS port = obj.getDefault();
Client cxfClient = ClientProxy.getClient(port);
cxfClient.getInInterceptors().add(new LoggingInInterceptor());
cxfClient.getOutInterceptors().add(new LoggingOutInterceptor());
cxfClient.getOutInterceptors().add(new SiebelPasswordInterceptor());
com.siebel.xml.literatureio.iterature inputObj = new com.siebel.xml.literatureio.lterature();
inputObj.setDocId("1234");
// Query by ID
LiteratureQueryByIdlInput input = new LiteratureQueryByIdInput();
com.siebel.xml.iteratureio.ListOfliteratureio list = new com.siebel.xml.iteratureio.ListOfliteratureio();
list.getLiterature().add(inputObj);
input.setListOfliteratureio(list);
LiteratureQueryByIdOutput output = obj.getDefault().LiteratureQueryById(input);
This is the interceptor which i added to the client before performing the query operation
public class SiebelPasswordInterceptor extends AbstractPhaseInterceptor<SoapMessage> {
public static final String SECURITY_TAG_NAME = "wsse:Security";
public static final String SECURITY_NAMESPACE = "http://schemas.xmlsoap.org/ws/2002/04/secext";
public static final String USERNAME_TOKEN_TAG_NAME = "wsse:UsernameToken";
public static final String USERNAME_TAG_NAME = "wsse:Username";
public static final String PASSWORD_TAG_NAME = "wsse:Password";
public static final String PASSWORD_TEXT_ATTRIBUTE_NAME = "wsse:PasswordText";
public static final String TYPE_TAG_NAME = "Type";
public static final String SECURITY_NAMESPACE_NAME = "wsse";
public static final String SECURITY = "Security";
public SiebelPasswordInterceptor() {
super(Phase.PREPARE_SEND);
public void handleMessage(SoapMessage message) {
List l = message.getHeaders();
Document d = DOMUtils.createDocument();
Element securityParent = d
.createElementNS(
SECURITY_NAMESPACE,
SECURITY_TAG_NAME);
Element userNameToken = d.createElementNS(
SECURITY_NAMESPACE,
USERNAME_TOKEN_TAG_NAME);
Element userName = d
.createElementNS(
SECURITY_NAMESPACE,
USERNAME_TAG_NAME);
userName.setTextContent(getUsername());
userNameToken.appendChild(userName);
Element pwdText = d
.createElementNS(
SECURITY_NAMESPACE,
PASSWORD_TAG_NAME);
pwdText.setAttribute(TYPE_TAG_NAME, PASSWORD_TEXT_ATTRIBUTE_NAME);
pwdText.setTextContent(getPassword());
userNameToken.appendChild(pwdText);
securityParent.appendChild(userNameToken);
SoapHeader header = new SoapHeader(new QName(
SECURITY_NAMESPACE, SECURITY,
SECURITY_NAMESPACE_NAME), securityParent);
System.out.println(" HEADER "+header.toString());
l.add(header);
protected String getUsername(){
return "test";
protected String getPassword(){
return test";
I did add this interceptor as out interceptor to my client but for some reason the header is not getting added to the request . can someone pls. help me in troubleshooting this issue.
Thank youThe problem is in <form action="http://www.eastsidestudios.com.au/FormProcessv2.aspx?WebFormID=42582&O ID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={mo dule_cid}"
You have to remove http://www.eastsidestudios.com.au from the action URL and make it relative:
<form action="/FormProcessv2.aspx?WebFormID=42582&O ID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={mo dule_cid}"
Cheers,
-mario -
I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
BrianI found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
-
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.
Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop -
I got the iPod touch, when i went to connect it to my computer to upload my music to it, It said that I need to upgrade to 10.5 but when I did I got the message below. So I tried uninstalling itunes and quick time and I cant download it at all and still get the message below. I have NO itunes on my computer now. =(
The message I get is::
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
I have no idea what this message means or what to do....There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
Moving ipod files onto a mac WITHOUT using a program
My computer recently crashed and I have a good 30 songs that are new from the itunes store since the last time I backed up my music files. I have a mac formatted ipod and want to be able to put the music on it back onto the computer, but want to do s
-
Trying to download Photoshop CS6 on a new HP convertible laptop with Windows 8.1
Hi, I purchased Photoshop CS6 a couple years back before CC was released. I just had to get a new computer because Best Buy majorly screwed up a simple repair on mine, and they junked my old computer and gave me a new one. It's a convertible HP runni
-
SAP Enterprise Project Connection 2.0 in SAP ECC 6.0 EHP6
Hello experts, Before describing any think let me tell u that i am very new to this field. We are configuring SAP Enterprise Project Connection 2.0 in our SAP ECC 6.0 EHP6 .I have already installed ABAP add on for EPC in ECC system. I have also insta
-
Is anyone running a Nvidia GT 120 in an earlyish Mac Pro (ca 2007)??
My original NVIDIA GeForce 7300 GT is not doing any sort of a good job with Second Life.. after installing Snow Leopard. It wasn't too bad before that install tho. Some say the GT 120 does a great job in the early Mac Pro. What say ye?
-
Updating iPhoto Library fails to complete in iPhoto '08
I'm upgrading my mother's eMac from OS10.2 to OS10.5 (and iPhoto from 'really ancient, perhaps '04 if not earlier' to '08). The OS 10.5 upgrade appears to work '100%' but the iPhoto '08 hangs while attempting to Upgrade the photo library. The upgrade