REQUIREMENT FOR RUNNING FORMS ON INTERNET

hello
sir, my forms are connected to db, and oc4j instance gets started and i am able to run these forms on my nearby client machine, whereas i am not able to run on other clients machine who are away from me i.e. the clients who are 4-5 km distance away from the server, what can be the real problem. pls tell the documentation to be referred for this reason.
thanks for an early solution.

Do you only have the OC4J component running or did you install the Oracle Application Server? The OC4J Instance that is installed with the Developer Suite is ONLY for running the form on your client/workstation. To "serve" the form to users over a network/internet you must have an Application Server setup to "serve" the application. As to the documentation, it can be found right here on OTN (see following link [Oracle Forms Services 11G Documentation|http://www.oracle.com/technology/products/forms/index.html]).
If you are running an earlier version than 11G, then select the appropriate link on this page to the version you are using eg; 10g R2, 10g R1, etc.
Hope this helps.
Craig...

Similar Messages

  • What are the Client machine requirements for running Forms 6i?

    What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
    The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
    Thanks in advance.

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • You do not have permissions to access a database that contains data required for this form to function correctly.

    I have dropdown on infopath form , and it receives data from sql server table ,  it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
    i am getting this
    You do not have permissions to access a database that contains data required for this form to function correctly.
    Can you please help?
    Thanks,

    try this one, if not yet
    Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library).  See if this works without any other changes, but if not, then...
    Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created. 
    For Type, use NTLM.
    Ensure the user has rights to access the database
    Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
    Also check this post having the similar issue:
    http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Customers running Forms over Internet (WAN)

    I am looking for customers running forms over internet (wan). I read the the customer's testimonials at http://www.oracle.com/technology/products/ids/customers/index.html but
    I didn't find any case about running forms application over internet.

    Aviana,
    Running a Forms application over the internet can be done, but there are a few things you need to consider before you do this. First, all of your users MUST be on High Speed. As Francios eluded to, Forms applications are Java Applets. Therefore, each person using the application will receive all of the Java Archive (.jar) files used by your program in order for it to run on their computer. Each time a user runs your application, the application will either download the initial set of .jar files or it must validate the .jar files that were previously downloaded to ensure they are current. This can be extreamly slow over dial-up and even on High-Speed line that are less than 256 kbps. Additionally, a user must either have the Sun Java Runtime Environment (JRE) installed our they will need to have Oracle's Jinitiator installed. Past experience showed this was a major trouble spot for Dial-up users.
    I guess the point I'm trying to make is make sure there are no better alternatives before going down this path. I worked on an application like this because management thought it was the cheaper way to accomplish what was needed. Four years later, after a lot of user complaints and a lot of time was spent supporting users, the application was rewritten from the ground up as a pure web app because it became too much to support and there were too many user complaints.
    Just a thought. :-)
    Craig...

  • What are the video card requirements for running a 23" cinema display

    What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
    Intel P4 3.0ghz   Windows XP  

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • Basic Setting required for running simple JMS class

    please tell me all setting required for running JMS class.
    I have installed IBM MQSeries.
    Especially about how to lookup for Topic and TopicConnectionFactory and where should i specify.
    it is very urgent please help me fast. Also send any files for doing setting to me at [email protected]

    Context ctx = null;
    Hashtable ht = new Hashtable();
    ht.put(Context.INITIAL_CONTEXT_FACTORY," "); //put yor init. context
    ht.put(Context.PROVIDER_URL, " "); //put your server url
    ctx = new InitialContext(ht);
    TopicConnectionFactory topicConnectionFactory = (TopicConnectionFactory) ctx.lookup(" "); // your connection factory
    TopicConnection tcon = topicConnectionFactory.createTopicConnection();
    TopicSession tsession = tcon.createTopicSession(false,Session.AUTO_ACKNOWLEDGE);
    Topic topic = (Topic) ctx.lookup(" "); // This is your topic
    TopicSender tsender = tsession.createSender(topic);
    TextMessage message = tsession.createTextMessage();
    message.setText("Topic Message");

  • Urgent help required for configuring forms server 6.0

    Hi every one/anyone
    i will really appreciate if i can get your attention and a little
    bit of your help in configuration of Developer Server.
    i have similar kind of a problem i hopeany one can shed some
    light on it as well.
    I am using
    Pentium III 450 MHZ 256 MB Ram
    NT server 4.0 with Service pack 3.
    Oracle 8.1.5
    IIS 4 or OAS 4.0.7
    Developer 6.0 down loaded from OTN.
    Internet Explorer 5.
    I have failed to run forms 6.0 on the web, i have tried all the
    option
    JDK supplied with the Developer 6.0 Software on DOS prompt.
    Jinitiator 1.1.7.11
    When i run forms from the Designer they work But When i try them
    to run form the browser Every thing works the status bar
    of the Internet Explorer 5 says applet initialized but the forms
    do not show up. when i press the refresh button of the browser
    the status bar show applet running and a forms window appear's
    but with out showing the form. I have checked from the Java
    Console it shows the same error on and again with or without
    jinitiator. I have almost tried every setting.
    Oracle JInitiator version 1.1.7.11
    Using JRE version 1.1.7.11o
    User home directory = E:\WINNT\Profiles\Administrator
    Proxy Configuration: Manual Configuration
    Proxy:
    Proxy Overrides: <local>
    Opening http://an.ma/web/oracle/forms/engine/Main.class no proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/BufferedApplet.class
    Opening http://an.ma/web/oracle/ewt/popup/PopupApplet.class
    Opening http://an.ma/web/oracle/ewt/popup/PopupOwner.class
    Opening http://an.ma/web/oracle/ewt/event/tracking/MouseGrabPr
    ovider.class
    Opening http://an.ma/web/oracle/ewt/help/HelpCapable.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/ImmediatePainter.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/DoubleBufferer.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/VirtualComponent.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/FocusRoot.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/KeyProcessor.class
    Opening http://an.ma/web/oracle/forms/test/Test.class
    Opening http://an.ma/web/oracle/ewt/painter/PaintContext.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/LWComponent.class
    Opening http://an.ma/web/oracle/forms/ui/mdi/MDIContainer.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuBar.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/BaseMIContainer.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuItemContainer.clas
    s
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenu.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuItem.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/AbstractPainterComponent.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuInvoker.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWPopupMenu.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuSeparator.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/Desktop.class
    Opening http://an.ma/web/oracle/forms/ui/mdi/MDIWindowMenu.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWPopupMenuListener.clas
    s
    Opening http://an.ma/web/oracle/ewt/popup/PopupFrame.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/BufferedFrame.class
    Opening http://an.ma/web/oracle/ewt/painter/Painter.class
    Opening http://an.ma/web/oracle/ewt/popup/PopupHandler.class
    Opening http://an.ma/web/oracle/ewt/UIManager.class
    Opening
    http://an.ma/web/oracle/ewt/UIManager$LookAndFeelInfo.class
    Opening http://an.ma/web/oracle/ewt/LookAndFeel.class
    Opening
    http://an.ma/web/oracle/bali/share/collection/StringKey.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleLookAndFe
    el.class
    Opening http://an.ma/web/oracle/ewt/laf/basic/BasicLookAndFeel
    .class
    Opening http://an.ma/web/oracle/ewt/painter/BorderPainter.clas s
    Opening http://an.ma/web/oracle/ewt/ColorScheme.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleColorSche
    me.class
    Opening http://an.ma/web/oracle/ewt/UIDefaults.class
    Opening http://an.ma/web/oracle/ewt/HashTableDefaults.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/MultiUIDefaults.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/laf/basic/ColorizingFilter
    .class
    Opening http://an.ma/web/oracle/ewt/lwAWT/VComponentPaintConte
    xt.class
    Opening http://an.ma/web/oracle/ewt/painter/ImagePainter.class
    Opening http://an.ma/web/oracle/ewt/painter/AbstractPainter.cl
    ass
    Opening http://an.ma/web/oracle/ewt/laf/basic/PerComponentUIIn
    stantiator.class
    Opening http://an.ma/web/oracle/ewt/UIInstantiator.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/plaf/StatusBarUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/plaf/ComponentUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleStatusBar
    Painter.class
    Opening http://an.ma/web/oracle/ewt/painter/AbstractBorderPain
    ter.class
    Opening http://an.ma/web/oracle/ewt/painter/AbstractWrappingPa
    inter.class
    Opening http://an.ma/web/oracle/ewt/painter/NullPainter.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleUIUtils.c
    lass
    Opening http://an.ma/web/oracle/ewt/graphics/ImageSet.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/DoubleBuffer.class
    Opening http://an.ma/web/oracle/ewt/plaf/TextUI.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleInsetBord
    erPainter.class
    Opening http://an.ma/web/oracle/ewt/painter/FixedBorderPainter
    .class
    Opening http://an.ma/web/oracle/ewt/util/ImmInsets.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/plaf/ToolBarUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleToolBarPa
    inter.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/ScrollBoxBorder
    Painter.class
    Opening http://an.ma/web/oracle/ewt/laf/oracle/DisabledBGPaint
    er.class
    Opening http://an.ma/web/oracle/ewt/painter/ColorChange.class
    Opening http://an.ma/web/oracle/ewt/painter/FilledRectPainter.
    class
    Opening http://an.ma/web/oracle/ewt/painter/FGBGColorChange.cl
    ass
    Opening http://an.ma/web/oracle/ewt/laf/oracle/OracleRoundedPa
    inter.class
    Opening http://an.ma/web/oracle/ewt/graphics/SynthesizingImage
    Set.class
    Opening http://an.ma/web/oracle/ewt/graphics/NullImageFilter.c
    lass
    Opening http://an.ma/web/oracle/ewt/painter/ImageSetPainter.cl
    ass
    Opening http://an.ma/web/oracle/ewt/painter/TextPainter.class
    Opening http://an.ma/web/oracle/ewt/painter/TruncatingTextPain
    ter.class
    Opening http://an.ma/web/oracle/ewt/laf/basic/DisablingPainter
    .class
    Opening http://an.ma/web/oracle/ewt/laf/basic/StringInstantiat
    or.class
    Opening http://an.ma/web/oracle/ewt/UIDefaults$DeferredValue.c
    lass
    Opening http://an.ma/web/oracle/ewt/laf/basic/SingletonUIInsta
    ntiator.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/SharedPainter.class
    Opening http://an.ma/web/javax/swing/JInternalFrame.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/util/LocaleUtils.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/util/WindowUtils.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/util/WindowUtils$ActiveWin
    dowTracker.class
    Opening http://an.ma/web/oracle/forms/engine/MainBeanInfo.clas s
    Opening http://an.ma/web/sun/beans/infos/MainBeanInfo.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/BufferedAppletBeanIn
    fo.class
    Opening http://an.ma/web/sun/beans/infos/BufferedAppletBeanInf
    o.class
    Opening http://an.ma/web/oracle/ewt/popup/PopupAppletBeanInfo.
    class
    Opening http://an.ma/web/sun/beans/infos/PopupAppletBeanInfo.c
    lass
    Opening http://an.ma/web/oracle/ewt/help/HelpProvider.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/event/AnyEventListener.cla
    ss
    Opening http://an.ma/web/oracle/forms/ui/FormMouseGrabProvider
    .class
    Opening http://an.ma/web/oracle/ewt/event/tracking/GlassMouseG
    rabProvider.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/DesktopCont
    ainer.class
    Opening http://an.ma/web/oracle/forms/engine/Runform.class no
    proxy
    Opening http://an.ma/web/oracle/forms/engine/MessageHandler.cl
    ass
    Opening http://an.ma/web/oracle/forms/registry/MessageManager.
    class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/LWWindow.cl
    ass
    Opening http://an.ma/web/oracle/ewt/event/tracking/KeyFilterPr
    ovider.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/DesktopEven
    t.class
    Opening http://an.ma/web/oracle/ewt/event/EwtEvent.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/EwtComponent.class
    Opening http://an.ma/web/oracle/ewt/scrolling/Scrollable.class
    Opening http://an.ma/web/oracle/ewt/dnd/Autoscroll.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/event/tracking/GlassMouseG
    rabProvider$Proxy.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericLookAnd
    Feel.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/SystemColorSch
    eme.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/FixedColorSche
    me.class
    Opening http://an.ma/web/oracle/forms/engine/icons/splash.gif
    Opening http://an.ma/web/oracle/ewt/graphics/ImageUtils.class
    Opening http://an.ma/web/oracle/ewt/graphics/ImageLoader.class
    Opening http://an.ma/web/oracle/forms/engine/Splashscreen.clas s
    Opening http://an.ma/web/oracle/ewt/lwAWT/LWComponent$PaintCtx
    t.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericInsetBo
    rderPainter.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericRectang
    lePainter.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericDesktop
    UI.class
    Opening http://an.ma/web/oracle/ewt/laf/basic/BasicComponentUI
    .class
    Opening http://an.ma/web/oracle/ewt/laf/basic/AbstractComponen
    tUI.class
    Opening http://an.ma/web/oracle/ewt/plaf/DesktopUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/WindowManag
    er.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/laf/BaseWin
    dowManager.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/DesktopList
    ener.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/laf/MouseWi
    ndowActivater.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/laf/KeyWind
    owActivater.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/ModalStyle.
    class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/LWWindow$Fo
    cusTransferComp.class
    Opening http://an.ma/web/oracle/ewt/event/tracking/TrackingUti
    ls.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/DesktopCont
    ainer$WindowEnum.class
    Opening http://an.ma/web/oracle/ewt/event/ListenerManager.clas s
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwWindow/DesktopLayo
    ut.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericCompone
    ntUI.class
    Opening http://an.ma/web/oracle/ewt/scrolling/ScrollableExcept
    ion.class
    Opening http://an.ma/web/oracle/forms/ui/mdi/ActivationTracker
    .class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/ScrollableAda
    pter.class
    Opening http://an.ma/web/oracle/ewt/scrolling/arrowBox/ArrowBo
    x.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericMenuBar
    UI.class
    Opening http://an.ma/web/oracle/ewt/plaf/MenuBarUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/MenuBarCo
    ntroller.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/PreferredRowL
    ayout.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/BaseMIContain
    er$AddLsnr.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWPopupMenuEv
    ent.class
    Opening http://an.ma/web/oracle/ewt/popup/NoPopupOwnerExceptio
    n.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericPopupMe
    nuUI.class
    Opening http://an.ma/web/oracle/ewt/plaf/PopupMenuUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/PopupMenu
    Controller.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/PreferredColu
    mnLayout.class
    Opening http://an.ma/web/oracle/forms/engine/RunformBundle_en_
    US.class
    Opening http://an.ma/web/oracle/forms/engine/RunformBundle.cla
    ss
    Opening http://an.ma/web/oracle/forms/engine/RunformBundle_en.
    class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericMenuIte
    mUI.class
    Opening http://an.ma/web/oracle/ewt/plaf/MenuItemUI.class no
    proxy
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/MenuItemC
    ontroller.class
    Opening http://an.ma/web/oracle/ewt/painter/AndOrStatePainterS
    witcher.class
    Opening http://an.ma/web/oracle/ewt/painter/AbstractPainterSwi
    tcher.class
    Opening http://an.ma/web/oracle/ewt/painter/DirectionalBorderP
    ainter.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/KeyStroke
    Painter.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/MenuItemP
    ainter.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/MenuSelCo
    lorChange.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericSelecti
    onPainter.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/MenuSelTe
    xtColorChange.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/DragRedispatc
    her.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericMenuSep
    aratorUI.class
    Opening http://an.ma/web/oracle/ewt/plaf/MenuSeparatorUI.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWCheckboxMen
    uItem.class
    Opening http://an.ma/web/oracle/ewt/thread/Task.class
    Opening http://an.ma/web/oracle/ewt/laf/generic/GenericMenuUI.
    class
    Opening http://an.ma/web/oracle/ewt/plaf/MenuUI.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/SubmenuIc
    on.class
    Opening http://an.ma/web/oracle/ewt/painter/PainterJoiner.clas s
    Opening http://an.ma/web/oracle/forms/engine/icons/bgnd.gif no
    proxy
    Opening http://an.ma/web/oracle/ewt/painter/FixedImagePainter.
    class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/laf/HorzMenuC
    ontroller.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/lwMenu/LWMenuBar$Acc
    elFilter.class
    Opening http://an.ma/web/oracle/ewt/event/tracking/GlassMouseG
    rabProvider$Disp.class
    Opening http://an.ma/web/oracle/forms/handler/UICommon.class
    Opening http://an.ma/web/oracle/forms/handler/IHandler.class
    Opening http://an.ma/web/oracle/forms/api/IObject.class no
    proxy
    Opening http://an.ma/web/oracle/forms/handler/FormWindow.class
    Opening http://an.ma/web/oracle/forms/engine/RunformException.
    class
    Opening http://an.ma/web/oracle/forms/net/Connection.class no
    proxy
    Opening http://an.ma/web/oracle/forms/engine/MessageHandler2.c
    lass
    Opening http://an.ma/web/oracle/forms/engine/FlushQueue.class
    Opening http://an.ma/web/oracle/ewt/util/ClipboardProxy.class
    Opening http://an.ma/web/oracle/forms/engine/Registry.class no
    proxy
    Opening http://an.ma/web/oracle/forms/registry/Registry.dat no
    proxy
    Opening http://an.ma/web/oracle/forms/registry/default.dat no
    proxy
    Opening http://an.ma/web/oracle/forms/net/SocketConnection.cla
    ss
    Opening http://an.ma/web/oracle/forms/net/EncryptedOutputStrea
    m.class
    Opening http://an.ma/web/oracle/forms/net/EncryptedInputStream
    .class
    Opening http://an.ma/web/oracle/forms/net/StreamMessageReader.
    class
    Opening http://an.ma/web/oracle/forms/net/StreamMessageWriter.
    class
    Opening http://an.ma/web/oracle/forms/engine/Message.class no
    proxy
    Opening http://an.ma/web/oracle/forms/engine/TerminalMessage.c
    lass
    Opening http://an.ma/web/oracle/forms/engine/IndexTag.class no
    proxy
    Opening http://an.ma/web/oracle/forms/net/SingleAccessorQueue.
    class
    Opening http://an.ma/web/oracle/forms/engine/DeleteMask.class
    Opening http://an.ma/web/oracle/forms/engine/FontEntry.class
    Forms Applet version is : 4
    Opening http://an.ma/web/oracle/forms/engine/DeferredMessage.c
    lass
    when i press refresh on the ie5 then it says applet started
    creates a window inside the browser with borders
    but does now show any thing expect a few more lines in the
    console window as following
    Opening http://an.ma/web/oracle/ewt/util/StringUtils.class
    Opening http://an.ma/web/oracle/ewt/lwAWT/BufferedPanel.class
    Opening http://an.ma/web/oracle/ewt/popup/PopupPanel.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/WaitingDoubleBuffer.class
    Opening
    http://an.ma/web/oracle/ewt/lwAWT/BalkingDoubleBuffer.class
    Opening http://an.ma/web/oracle/ewt/graphics/GraphicUtils.class
    Opening http://an.ma/web/oracle/ewt/util/ComponentUtils.class
    Opening
    http://an.ma/web/oracle/ewt/layout/DirectionalLayout.class
    I hope any one can help me. I have been trying to run this thing
    for almost 2 months.
    bye
    null

    I had the same problem for the longest time... The problem is
    the "SplashScreen" it hangs everything up...
    My solution was add this line to your html:
    <param name="splashScreen" value="no">
    Good luck,
    Let me know if that works..
    Jeff.
    mobeen (guest) wrote:
    : Hi every one/anyone
    : i will really appreciate if i can get your attention and a
    little
    : bit of your help in configuration of Developer Server.
    : i have similar kind of a problem i hopeany one can shed some
    : light on it as well.
    : I am using
    : Pentium III 450 MHZ 256 MB Ram
    : NT server 4.0 with Service pack 3.
    : Oracle 8.1.5
    : IIS 4 or OAS 4.0.7
    : Developer 6.0 down loaded from OTN.
    : Internet Explorer 5.
    : I have failed to run forms 6.0 on the web, i have tried all
    the
    : option
    : JDK supplied with the Developer 6.0 Software on DOS prompt.
    : Jinitiator 1.1.7.11
    : When i run forms from the Designer they work But When i try
    them
    : to run form the browser Every thing works the status bar
    : of the Internet Explorer 5 says applet initialized but the
    forms
    : do not show up. when i press the refresh button of the browser
    : the status bar show applet running and a forms window appear's
    : but with out showing the form. I have checked from the Java
    : Console it shows the same error on and again with or without
    : jinitiator. I have almost tried every setting.
    : Oracle JInitiator version 1.1.7.11
    : Using JRE version 1.1.7.11o
    : User home directory = E:\WINNT\Profiles\Administrator
    : Proxy Configuration: Manual Configuration
    : Proxy:
    : Proxy Overrides: <local>
    : I hope any one can help me. I have been trying to run this
    thing
    : for almost 2 months.
    : bye
    null

  • Licensing requirements for running SBS 2011 in Hyper-V

    I am currently running SBS 2011 that is natively installed on a Dell PowerEdge server. The plan is to add some RAM and then convert the system to a Hyper-V server that would run the SBS operating system as a VM. From a licensing standpoint, I realize I will
    need to purchase a copy of Server 2012 R2 Standard in order to run Hyper-V on the server. I believe I would also be licensed to run the SBS operating system as one of the two licensed VMs.
    My question is what is the requirement as far as user CALs is concerned? Seeing as my users will continue to access the SBS server, they will never access the Server 2012 box directly. The only purpose for Server 2012 is to provide the Hyper-V host. So am
    I bound by the user licensing of the SBS server, or am I required to also purchase user CALs for the Server 2012 platform?
    Thanks for any insight on this question...

    It is always best to talk with a trained Microsoft licensing specialist when asking about licensing questions.  A license is a legal agreement between you and the license issuer.  Relying on information from a technical forum on the internet would
    not stand up in a court of law, and your auditors would not like that.
    That said, a Windows Server CAL - Client Access License - covers access to Window Server(s).  Whether you have 1 or 100 Windows Server, the client access license grants the right to access the services.  Yes, they are operating system version specific,
    but if you are running only the Hyper-V role in the host installation, no CALs are required for the host.  If you are running other services that the clients are accessing, then you would need to purchase the 2012 CALs.  Again - check with a trained
    Microsoft licensing specialist.
    . : | : . : | : . tim

  • Hardware requirement for running exchange 2010 on vmware workstation

    Dear Team,I need to create a exchange 2010 sp2 on a guest os on vmware workstation.kindly help me out with the physical hardware requirements for a home user

    Hey Mukund26,
    Before I answer your questions, my suggestion would be for you to figure out exactly what you want to get out of running that Exchange lab.  Are you trying to learn Exchange features like DAGs?  Are you trying to learn about virtualizing Exchange?  When you figure that out you'll be better able to answer question 1 since you may not need all of those virtual machines.
    Here are my thoughts on your questions.
    1) It is probably technically possible to run 10 virtual machines on the configuration you have but you're going to have pretty bad performance. I would try to trim that down to only the virutal machines that you really need in order to use the lab how you want to use it.  Here are some questions that may help you figure out what you need:
    Why do you need two domain controllers?  I don't think you need to worry as much about redundancy in your lab. 
    Why do you need 2 ESXi hosts and a vCenter?  What purpose do they serve in this configuration?  Are you trying to run the Exchange VMs nested under the ESXi VMs?  If so, why?
    Is there a reason why you want to separate out HTS/CAS from MBX in your lab?   Combining all roles together can reduce the number of VMs you need.  If you separate out the roles you'll need to allocate a lot of RAM to support all of those Exchange VMs.
    2)  Running a lot of virtual machines on a single 1TB SATA disk, especially a 5400 RPM disk, is going to be slow.  It'll be especially painful when the VMs are booting up, rebooting, shutting down, etc..  Try to stagger the power on operations so they don't all boot at once.  For example, first boot your DCs, then boot your HTS/CAS, then your MBX, etc.   There is no doubt that configuration will be slow, so if you can get your hands on an solid state drive with enough space you'll have significantly better performance.  For the purposes of a lab, though, it is probably ok if you can be patient.
    3) I think the i5 processor will be just fine for this lab.  Usually in a lab setting CPU performance isn't the most important thing so similar to above as long as you can be a little patient I think that CPU will suit you just fine.
    As I said figure out what you want to get out of the lab and then you can determine how many VMs you need and whether or not you want to upgrade hardware.  If you're looking to learn about Exchange 2010 in general I would suggest using multirole servers, getting rid of one of the DCs, and not worrying about virtualizing ESX/vCenter so that you can learn.  If you're looking to learn about virtualizing Exchange 2010 on vSphere then let's figure out exactly what you want to get out of it and figure out what you can learn using VMware Workstation and what you really need vSphere for.
    Best of luck!
    Matt
    http://www.thelowercasew.com

  • Basic System Requirements for running 3rd party samples

    Here's a VSL instruments conundrum.
    From what I can see, I've got approximately double the minimum system requirements spelled out by VSL for running Vienna Instruments II. But my system is crashing immediately with only one instrument plugged in.
    Here's my full setup and things I've tried so far.
    MacBook Pro, 1.86gHZ Dual Core processor, 2G DRAM.
    MOTU Ultralite I/O Interface
    Logic Pro 7.2.4
    500Gig 7200 RPM, 8mb cache RAM external Western Digital Hard Drive.
    Firewire 400 (the early MacBook Pros from last year didn't have 800).
    VSL installer, Logic Pro, and Syncrosoft are the latest updated versions (just bought VSL last week).
    Vienna Instruments are installed on the external. Logic Pro and Vienna standalone are installed on the internal computer drive (200G, 40G empty).
    Since I only have one firewire slot, I have tried piggy backing the MOTU and the 500G external hard drive both ways (MOTU plugged directly into the computer in front of the HD, with the HD piggy-backed into the MOTU's firewire slot, and the HD in front of the MOTU). No difference in results.
    Specific issue: everything works flawlessly until I plug in just one Vienna sample. As soon as I choose it (before playing anything), the system starts to crackle, and even just trying to audition the sample in the AU Standalone taxes the system beyond being able to make a consistent sound. As I touch the "piano keys" in the standalone, most of the time I get no sound, other times I'll get the note accompanied by a lot of crackling. Then when I actually try to play the sample in a Logic Pro track, all sound is hosed. Only solution is to reboot Logic Pro, and 1/3 of the time I have to reboot the computer itself.
    This happens whether I have 10 other Logic Pro instruments plugged in or none. One highly optimized Vienna sample by itself hoses the whole system (example - I've tried the Bosendorder optimized to only take up 1MB of RAM - same result including only 20% of the notes playing in the VSL standalone before I even try to play it in a Logic Pro track).
    The system requirements spelled out by VSL are about half of what my system has. (VSL calls for a minimum 1G processor and 1G of RAM - I have a 186gHZ Dual Core processor and 2G Ram). I don't mind having to optimize and play some tricks to get 6-10 instruments to play at once, but I can't get a single instrument to run (with double the minimum system requirements).
    Spent 2 1/2 full days working on this so far with no progress. Any suggestions? Thanks in advance for your help.

    Well, you've managed to start three separate threads about the same thing. This not only fragments all the responses you'll get, but it also limits the search engine for future users experiencing similar problems, looking for solutions.... but hey, it ain't my forum...
    I can't help but wonder if having two FW devices on the same bus is causing a bottleneck on the FW buss. Getting an external FW card for your mac might be necessary...keeping the VSL Hard Drive and the MOTU interface on separate busses.
    In the meantime, try this... switch your audio driver to "Built-In Audio", so that Logic is using it's internal sound card, not your MOTU. Try loading a VSL instance and playing.
    If it works, playing through your computer's speakers, then you've possibly found the trouble.
    Have you emailed VSL Tech support yet?

  • Convertion of PO to requirement for running MRP

    Dear all,
    There is one Plant which creates purchase order and tranfer to another Plant. In the receiving plant the PO will automatically converted as requirement and they will run MRP for that plant.
    Please explain me how to convert PO to requirement to run MRP?
    Thanks and Regds
    Sridhara K N

    Hi,
    plantA - needs the material from plantB
    plantB - buys the material and sens it to plantA
    One possible process:
    1. PlantA creates a STO
    2. PlantA's STO generates requirement in plantB
    3. PlantB runs MRP > creates procurement proposal for the requirement (PR)
    4. PlantB converts the PR to PO
    5. PlantB receives the goods from its supplier (GR against PlantB's PO)
    6. PlantB sends the goods to plantA (GI from plantB)
    7. PlantA receives the goods against STO (GR)
    Of course, based on your organisational strucure (purchasing organisation) you can order the goods directly from plantA...
    Regards,
    Csaba

  • A database that contains data required for this form to function correctly cannot be found?

    Hi,
    In my scenario, i m trying to pull out data from sql server using windows authentication and display in infopath form.
    I set some rules in textbox control change that retrieve data from sql database.
    and I have enabled cross domain data access for user form .
    and i have stored the connection file into the connection library and i have approved.
    The form working fine in server (browser), but whenever i m trying to open the form in client browser i m getting the below error.
    please assist me to resolve this error.
    venkateshrajan

    Hi,
    Please make sure following options are enabled in Central Administration > General Application
    Settings > InfoPath Forms Service > Configure InfoPath Forms Services.
    1) Allow user form templates to use authentication information contained in data connection files.
    2) Allow cross-domain data access form user form templates that use connection settings in a data connection file.
    (-This you have done)
    Do you use host name to access the data source? If yes, please
    check of the DisableLoopback check is enabled. Please make sure the loopback check is disabled on all SharePoint servers and reboot server to test if it works.
    http://support.microsoft.com/kb/896861
    Please refer this link with similar problem
    Hope it helps!
    Thanks,
    Avni Bhatt

  • System Requirements for Running Cloud at home?

    I teach film production and would like to have access to Creative Cloud at home, so I can brush up on all the programs having recently transitioned from Final Cut Pro.     My home computer is pretty basic and its a PC.    What are the minimum system requirements for Hard Drive,  Video Card and Ram?    Do I download the programs onto my pc or do I use them in the cloud, thereby saving my precious, and tiny hard drive?   

    You misunderstand. Even in Creative Cloud the programs install locally. It's merely a different licensing and distribution model. For the requirements, refer to the producrt pages of the individual products like here:
    http://www.adobe.com/products/premiere/tech-specs.html
    Mylenium

  • What are the steps required for running a form in web browser in form10g

    Hi All,
    I want to run my form in web i.e forms10g. Please guide me what are the application server, configuation files and built in packages required to set up.
    Thanks

    You have to do some homework before you post here. You're very unlikely to get any help without explaining what you already tried and what your specific problem is. I guess your best of to start reading the Forms Services Deployment Guide.
    I can't point you to the correct location since you didn't even mention the version you're using. If it's 10.1.2.0.2 you can find it at http://download-uk.oracle.com/docs/cd/B14099_19/web.1012/b14032/toc.htm
    Otherwise have a look around at http://docs.oracle.com

  • Development and Production Requirements for a Forms/Report application

    Dear all,
    We have an application witch run in client/Server mode using Forms/Reports 6i For 300 users.We want to migrate it on Forms/Reports 9I using Oracle 9IAS and Oracle 9IDB.
    I would like to have advises about material requirements of both development and production environment((developer deskop, development appServer and databaseServer, end user desktop,production databaseServer and production AppServer).
    Thank u for giving more details about my request.

    I have my dev and production on 2 different databases/instances, and the workspaces have a different name aswell (think 'dev' and 'prod').
    I do reuse my application ids, which makes the whole process a lot more manageable: easier for me to identify and replacing a whole application.
    However, when i want to replace only 1 page, apex stumbles over the workspace. Bummer.
    So i took an export of a page on both workspaces, and opened the files.
    prompt  Set Credentials...
    begin
      -- Assumes you are running the script connected to SQL*Plus as the Oracle user APEX_040100 or as the owner (parsing schema) of the application.
      wwv_flow_api.set_security_group_id(p_security_group_id=>nvl(wwv_flow_application_install.get_workspace_id,1377027056414870));
    end;
    wwv_flow_application_install.get_workspace_id,1377027056414870));
    I took both workspace IDs and keep them in a simple txt in my installation-files folder. Each time i need to import a page from dev->prod i go in the exported file from dev and change the workspace id to the id of my production workspace id. Everything works magically after that.
    If your application ids also differ, you can try changing the id in the exported file aswell, but i can't tell if it works or not since i've not done that yet.
    prompt  Set Application ID...
    begin
       -- SET APPLICATION ID
       wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,130);
       wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
    null;
    end;where of course you'd change around nvl(wwv_flow_application_install.get_application_id,130);

Maybe you are looking for