Requirement mapping.

Hi SAP Professionals,
I'm not getting any clue how to map the following requirement? Please go through the scenario.
Scenario:
After Inquiry preparation following acitivities should done:
1. look up of the finished product availability; whether it is present or likely to be present within the required delivery duration. If it is available it is soft blocked. But all this could not reserve the finished product could not reserve the available capacities.
2. If it is not available, the inquiry is sent to Production Planning Incharge, who will calculate and forward "Delivery Lead Time Response".
Is it possible in standard SAP system to calculate "Delivery Lead Time Response" after Inquiry creation and before creation of quotation?
Regards,

Hi Rajesha,
we mapped the above mentioned process as below.
1. Creta Enquiry (VA11)
a. Automatic mail trigerred to Head PPC through Workflow
b. Display Enquiry list (VA15)
Workaround:
2. Get the appropriate Lot/Quantity from Enquiry created by SD user. Select Appropriate Routing Counter (CA02) and run 'Scheduling' transaction using 'Extra' on Menu Bar.
3. Update Material Master for FG for that specific lot (CA96). Lot size dependent Inhouse Production Time will be reflected in 'Workscheduling' view of FG Material Master Record.
4. While creating Quotation this time will automatically reflected as Schedule lines for the manufacturing of that FG.
Note: I'm not that much assured whether Updation from Routing of FG will take 'Material Lead Time' into consideration?
Optimistic Solution:
2. While creating/chaging Enquiry (VA11 or VA12) using GATP logic of APO-PPDS one can check the Production Delivery Date taking Material as well as Operation Lead time, even taking SD lead time into consideration. Even he can check the present Capacity Load and the Scheduling workcenter wise/order wise. It is also possible at Quotation Creation Level. Even using this logic we can see bucket scheduling (of 15 days) and many more as per client expectations and SAP Product strength.
Regards,
Edited by: abu arbaba on Jun 7, 2008 10:38 AM

Similar Messages

  • Module-specific checklist for business process requirements mapping?

    Hi,
    I am looking for some ASAP tools to support the business process requirements mapping phase of an implementation. The best would be to have a checklist, a sheet of questions to ask during the meetings so that each requirements are considered when creating the business processes in solution manager.
    Anyone can recommend me such material?
    Thanks in advance,
    regards,
    Ádá

    Dear,
    Check: Pre Implementation Questions
    Implementation questionnaire
    http://it.toolbox.com/blogs/dhruvs-blog/sap-implementation-blueprints-32286
    Regards,
    Syed Hussain.

  • P67-C43 "cannot find required map name"

    Hello
    Specs:
    P67-C43
    RAM: Gskill DDR3 1333 8GB
    Video card: 4870 XFX 1GB
    PSU: Antec 620W
    CPU: i5 2500k @ stock 3.3ghz
    DVD drive: Sony (don't know exactly)
    HD: 1TB Samsung
    & A Hyper 212+
    I'm getting this message
    EFI Shell version 2.00[4.640]
    Current running mode 1.1.2
    map: cannot find required map name.
    Press ESC in _ seconds to skip startup.nsh, any other key to continue.
    Shell>
    I don't get that message when I take out or put in a new stick of RAM. Instead, I can go the BIOS and change settings or load default settings. If I choose default settings/boot then I get the message.
    Any help please. Please don't tell me it's DOA :(

    Quote from: petersonx on 14-May-11, 23:52:55
    I don't get that message when I take out or put in a new stick of RAM. Instead, I can go the BIOS and change settings or load default settings. If I choose default settings/boot then I get the message.
    Can you further explain on this part?
    Do you already have an OS installed to the system? If you do, does the message pops up when you do the OS installation?

  • MSI Z77A-GD65 Cannot Find Required Map Name

    Hello, I am trying to do my first build ever and ran into an error with the MSI 7ZZA-GD65 motherboard. I tried to do a build outside of the case to make sure everything was running and I got an error when booting up my system. It states.
    EFI Shell version 2.31 [4.6530
    Current running mode 1.1.2
    map: cannot find required map name.
    Press esc in 1 seconds to skip startup.nsh, any other key to continue.
    Shell> _
    There isn't much plugged into the board right now I have.
    CPU: Intel i5-3570k
    RAM: 1 stick Billistix in slot DIMM 1
    GPU: Asus Gtx 660ti
    PSU: Seasonic M12 II 620w Bronze
    I couldn't find anyone else getting the error so I posted here. Please help if you can.

    Quote
    RAM: 1 stick Billistix in slot DIMM 1
    Is that the second slot from the CPU ? If not, then insert it into that second slot. Afterwards do a full CMOS clear, and then retest.
    Also remove that GPU card for now and test with only the onboard graphics.

  • EDI 852 requirement mapping

    Hi All,
    We have to configure EDI 852 scenario using Seeburger Adapter. We have xsd of 852, what else I need to start the develeopment?
    Do I need to create the Mapping using BIC mapping, if yes then from where I can get the BIC mapping tool?
    Or we have standard mapping provided by seeburger?
    Please advice.
    Regards,
    Krishna Chauhan

    <<<<<<From where can I download the BIC mapper tool?
    Please check SAP NOTE : 1353318
    <<<<<Any link for the step to follow (How to generate the Mappping and SCA file).
    For BIC Mapping please follow below document
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b014e657-39fc-2b10-31a5-ffa81efa9347?QuickLink=index&…
    Still facing any issues let me know
    Thanks,
    Sreenivas

  • XSLT Mapping changes Required

    Hello Experts,
    I got one change requirment, where the name filed in the idoc contains special character (like semi colon) in between the name, I want to put double quotation for that special character at XSLT mapping.
    Eg:
    Input Name:   Ravi ; Kumar
    Out put would be: Ravi  ";" Kumar
    Please help me out with the required mapping changes in XSLT.
    Thanks in Advace.
    Edited by: ItsUrRock on Mar 23, 2011 11:55 AM

    Hi,
    use xpath function translate() and escape the semicolon and the quotes.
    <output><xsl:value-of select="translate(//Name,%3B,%25%3B%25)"/></output>
    If  that escapes do not work google for escape sequences.
    Regards,
    Udo

  • Custom error message in mapping-Alert

    We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
    My question is,we would like to send this custom error message to email receipients through RWB-AFW.
    How do we capture this custom error message is alert category or alert rule?

    SOLVED!!!!
    UDF call to RFC-FM by passing payload dato in t it

  • Problem in Uploading Java mapping Code

    Hi Guys,
                  I never work on Java mapping before, i got the code required for my progrmme in these forums.So i saved it as a text file. now i want to import that fileintomy programme as Java class. i think i have to use Netweaver Studio. what exactly i have o do it.
    Thanks in advance.
    Kartik

    Hello Kartik,
    If your code is handling the Required Mapping.Then what is you need to do is  :
    Create the Jar file using any Java IDE (or) use Netweaver developer studio.
    Before creating the u201Cjaru201D file just make sure that the "path" of the class file in the imported archive. It should be the
    same as your "package" path.
    Once the class file is created, we have to create the jar file with all the necessary files. After creating the jar file, it
    has to be deployed to XI.
    Import the Jar file using Imported Archive  in IR under Mapping Objects.
    See this blog it explains how to load :
    Java Mapping (Part III)
    After doing the necessary setps you can test the Mapping.
    regards
    Gangaprasad

  • Same interfaces - is mapping needed?

    Hi guys,
    I have a lot of integration scenarios with soap->XI>proxy and I don't need mapping, because soap messages are quivalent to proxy ones.. Is it needed to cerate message mapping and interface mapping, although the messages have the same structure? I think, it must decrrese the prformance.. Is there some way, how to ommit it?
    Thanx for answer, Olian

    hi Olian,
    As per my knowledge you will not require mapping.
    But one thing i can tell you that if you will do the mapping then also it will not reduce your performance
    Regards,
    Hetal

  • Mapping IDoc--Flat file

    Hi,
         I ahve a following mapping requirement.
    map E1EDK02-BELNR if   QUALF=009  .
    Source field is BELNR and target is Billing document number.
    I have done mapping as follows.
    Map QUALF and constant[009] to equalsS function fron text function.Then output of the above is mapped to  if condition and BELNR is mapped to then condition.Output of if then condition is apped to billing document nymber.
    I am getting the following error.
    RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:MT_BillingDocuments/PONumber. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast 01 to boolean] in class com.sap.aii.mappingtool.flib3.Bool method or[01, 17, com.sap.aii.mappingtool.tf3.rt.Context@1cb2d89]

    Hi,
       The value which is mapped to PO Number
      is throwing an Exception.
      please copy the payload from moni..
    and try to test it at message mapping.
    warm regards
    mahesh.

  • PI 7.1 proxy file with put mapping

    hi All,
    I have to build  a scenario,
    ABAP proxy to flat file.
    Source and target  structure are same  and I want to in the same format .
    1)  Do I required do the message mapping or operational mapping?
    2) some one suggest me that we dont required mapping in this case only need toc reate datatype and message type?
    then how to use them and what are the other necessary configuration we need to do for this.
    Please share some blog.  Step tpconfigure this .
    Thanks
    Ram

    and Do we not required to create interface,?
    ID objects (Agreements, determinations, channels) are mandatory in any scenario....and so in yours....just check the blog by William Li on how to transfer data without repository.
    Regards,
    Abhishek.

  • MapViewer base map image is not loading on OBIEE 11.1.1.6.4

    Hi Experts ,
    We are facing issue in OBIEE 11.1.1.6.4 and OBIEE 11.1.1.6.5. The background maps are not loading. The measure is getting plotted the as per postal code but the background map is not coming up.
    The Issue is only with External maps. It is working in Google maps.
    In Mapviewer > Management > Manage Map Tile Layers we can see GOOGLE_MAP as well as our required map tile layer.
    When we select GOOGLE_MAP and click on view map / manage tiles button we can see the background map.
    But the same doesnt happen for our background map.
    Our Operating System is Windows 2008 (We have tried in Linux as well).
    Thanks

    In case you have not found the reason for your problem. You mentioned that the problem is only with External maps, but also say that it works with Google maps (which is external). I'm assuming you had an internal map that was not working, right? First suggestion is to check MapViewer log for errors after you try to view the tile layer. You may have missing metadata, or broken definitions (base map or tile layer) pointing to data that do not exist.

  • PI mapping content for MM-SUS scenario?

    Dear Guru's,
    We are configuring MM-SUS scenario with SRM on 7.01 and ECC 6 ehp 5 and PI 7.02. While configuring the PI scenario for the above integration, we are not finding the required mapping for the purchase order output from the ECC side  in the PI scenario.
    We have imported XI Content for SRM SERVER 7.01, SAP APPL 6.05, SRM SERVER IC 7.01. Aprat from this any other XI content needs to be imported into PI SLD ?
    For the interface PurchaseOrderERPRequest_Out_V1 from MM to SUS, do we required to do the PI mapping manually or any XI standard content is available. If so, please help me with the Content Details.
    Thank you.
    Ranjan

    Dear Nikhil,
    As suggested by you earlier, we have imported the content for the integration scenario 'SE_SERVICE_PROCUREMENT' and we have found all the required content. Only thing missing is the mapping for ERP PO REQUEST OUT in the PI content.
    I am wondering whether SAP is not giving the standard content and we need to develop our own content for mapping or there is a direct call in place.
    Anybody who has used the scenario, what was the approach? or is there anything we are missing?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

  • Message Mapping : content based target structure generation

    Hi Team,
    As per my requirement , mapping should generate target structure based on one "field" value in source srtucture.i.e target structure should generate for some of the custid values  , not for all cust id's . also I dont want empty files .
    Source:
    MT_SOURCE
    -Custid
    -CustName
    Target:
    MT_TARGET
    -Custid
    -CustName
    But I want to generate Target structure MT_TARGET only for custid values' 001,002,003 ; for remaining values I dont want to generate target structure MT_TARGET . Is it possible using graphical mapping.I think UDF is correct oprtion. can you provide sample code for this requirement.
    Thanks.
    Drumi

    But I want to generate Target structure MT_TARGET only for custid values' 001,002,003 ; for remaining values I dont want to generate target structure MT_TARGET . Is it possible using graphical mapping.I think UDF is correct oprtion. can you provide sample code for this requirement.
    might be it is helpful for ur requirement:
    Custid + constant(001) +equals ->(first) if
    Custid->then                                                 
    Custid + constant(002) +equals-> else
    First if ending -> Second if
    Custid->then
    Custid + constant(003) +equals-> Second else ->target Custid

  • Two Alerts for one scenario: Application Error and No mapping found

    Hello,
    we have a synchronous scenario here embedded in an BPM.
    The last send step step is sync. The receiver is a web service (SOAP adapter) which sends back a response.
    Problem with the response from the service:
    First test: error entries in SXMB_MONI and in RWB
    RWB only shows message "No mapping found".
    SXMB_MONI shows more:
    1 entry for send step (status: log version)
    1 entry for APPLICATION ERROR for response
    1 entry for NO_MAPPING_PROGRAMM_FOUND for response
    APPLICATION ERROR:
    We have changed to trace level 3 now and there are some messages:
    level 3 message type T: Unknown channel type: SOAP
    Don´t know if this matters, because the channel is the sender channel.
    NO_MAPPING_PROGRAMM_FOUND:
    We have checked the whole implementation.
    It is completed w/o anything missing. the required mapping is available.
    No left change list entries to be activated.
    Error text:
    The Interface-Mapping http://xxx.com/xi/global GetDocIDsReq_nach_GetDocIDsResp is not available in runtime cache
    We made more than one full cache refresh but w/o any effect.
    We checked: There are no locks left!
    Does anybody here have experience with this problem or has more ideas what to do?
    Best regards
    Dirk
    Message was edited by:
            Dirk Meinhard

    Hello Dirk,
    We figured out that if you change your message mapping you also have to refresh and save your Interface Mapping.
    To ensure that your messages are equal with your Interfaces and the Message Types you should test the Interface Mapping by using integration Builder.
    If this works you have to check your BPM.
    By using BPM we figured out that if there is a fault in a BPM version the engine will not use this new version.
    To figure out which BPM version is used you have to open the
    Process Monitor à select the process and display the graphic à navigate to EXTRAS and select Workflow Builder. There you will see which BPM is really used. Maybe this is an old one.
    Hope this will show you where the problem is.
    Daniel

Maybe you are looking for