Requirement needed in SelectOneChoice

Hi Guys,
My JDev version is 11.1.1.4. Here i came across a requirement by using SelectOneChoice. Say for example, If i have address as ListItem in SelectOneChoice like company name,address1,City,State,Zip i need to display that ListItem as Follows
CompanyName will be in oneline ie displayed in another ListItem
address1 in another line
City in another line and then
state in another line and last
zip in another line.
In this way one ListItem should be split into multiple lines where ever needed.
Please help in above requirement.
Thanks in advance.
Edited by: Chinnu on May 12, 2011 10:42 AM
Edited by: Chinnu on May 12, 2011 10:47 AM

Hi Frank,
First of all thanks for the reply..
I use ADF BC and it is not dependent select Lists.
If we have address as a single ListItem in SelectOneChoice like company name,address1,City,State,Zip
we have to customize that single ListItem value as follows:
Companyname should be displayed as seperate ListItem
address in seperate ListItem
City in seperate ListItem and so on.

Similar Messages

  • What Requirement Needed To Sell Application on iPhone?

    Hi, guys.
    Greetings.
    I want to ask help about requirement needed to sell application on iPhone.
    So if there's any kind person that can helped me out here, i would like to say thank you very much and may God repay your good deeds.
    Right now me and my team project are currently developing games software, and we are interested to sell it on iPhone.
    And we are very lack of information how to sell it.
    Is there need a company or enterprise to sell application on iPhone?
    Coz we're indie team project that doesn't have a company or enterprise yet.
    And how 'bout the payment?Is it using paypal account or something else?
    For now that's the only question i want to ask, if in the future i have another question, i'll post again in this community.
    Thanks again to whom read my post, and thousands of many thanks to whom that answer it.
    And this is my e-mail for contact me.
    [email protected]
    Okay guys see you laters, i'm looking forward for your kindness.
    Best regards.
    Dwi Nugroho.

    Dwi,
    You may want to start here and see what you can learn.
    http://developer.apple.com/
    Best of luck.

  • Hardware requirements needed

    Hi there,
    can somebody please list out what are all the
    1. Hardware requirements needed for an Application
    Service Provider to develop an application (like
    webserver, application server, machine memory size
    etc).
    2. Hardware requirements needed for an Application
    Service Provider to have dedicated/dial up
    internet connectivity with an Internet Service Provider.
    Awaiting your response.
    Thank you.
    Yatin

    It is very simple. A server doesn't need to be very fast. A 486 could be high enough, just notice that you need 64+ memory and a good harddisk, the faster the harddisk the better!
    A 486 won't cost so much money and could be enough, at least it is enough for testing and developing. The internet connection is far the most important thing I guess....
    Hope this is an answer for you

  • noselection option need on  Selectonechoice on column facet - filter

    hi experts,
    using jdev 11.1.1.5.0-adfbc.
    i need empty space/<noselection> on selectonechoice on column filter. eventhough i set <noselection> . but it not showing see the pics.
    <af:column headerText="Status"
                       id="c14" sortable="true" filterable="true"
                       sortProperty="SshdStatus">
              <af:selectOneChoice value="#{row.bindings.SshdStatus.inputValue}"
                                  label="#{row.bindings.SshdStatus.label}"
                                  required="#{bindings.SupplierScheduleView1.hints.SshdStatus.mandatory}"
                                  shortDesc="#{bindings.SupplierScheduleView1.hints.SshdStatus.tooltip}"
                                  id="soc1" readOnly="true">
                <f:selectItems value="#{row.bindings.SshdStatus.items}" id="si1"/>
              </af:selectOneChoice>
              <f:facet name="filter">
                <af:selectOneChoice value="#{vs.filterCriteria.SshdStatus}" id="soc2">
                  <af:forEach var="listrow"
                              items="#{bindings.StatusMACLNEPR1.rangeSet}">
                  <!-- <f:selectItems value="" id="si2"/> -->
                  <f:selectItem id="si2" itemLabel="#{listrow.DataValue}"
                                    itemValue="#{listrow.DataName}" />
                                    </af:forEach>
                </af:selectOneChoice>
              </f:facet>
            </af:column>see this pics:
    http://imageshack.us/photo/my-images/138/status11.png/ --pictures changed lately                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi,
    since you use af:forEach, there is no <no selection> generated. You iterate over the list items in the bindings and what you see is what you get. Change your code to
    <f:selectItem id="si2" itemLabel="No Selection"
    itemValue="" />
    <af:forEach var="listrow"
    items="#{bindings.StatusMACLNEPR1.rangeSet}">
    <!-- <f:selectItems value="" id="si2"/> -->
    <f:selectItem id="si2" itemLabel="#{listrow.DataValue}"
    itemValue="#{listrow.DataName}" />
    </af:forEach>
    Frank

  • We have had a request to purchase Livecycle ES4. I am trying to find out how much this will cost and get a list of requirements needed to install and run this product,

    Looking to find out what the infrastructure requirements are for this product and how it needs to be administered by our IT shop. Thanks

    Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
    First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
    Can you?
    You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
    What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
    Verizon although with the best coverage is also the highest priced.
    Good Luck

  • What requirements need to use IE8 in SAP?

    Hi,
          Our systems are on ERP 5.0 SP22, Netweaver 640. The company that I work wants to upgrade Internet Explorer from 7 to 8.
    What requirements I need to use IE8 in SAP?
    Thanks for the help!!!

    I think IE 8.0 is only supported by the latest portal SP's. However, you should be able to find an exact answer by reviewing the Product Availability Matrix for the SAP Components you have.
    Just go to http://service.sap.com/pam
    This is a link you'll always need to reference here and there.
    Regards,
    Tom

  • What are the requirement need for installing of PI7.1

    Hello All,
        What are the Hardware and Software requirements required for Installing PI 7.1.  Installation of PI 7.1. need 64 bit operating system or can I install 32 bit operating system.
    Can anybody send me the installation document on PI 7.1.
    Thanks & Regards,
    Venkat K

    Hi,
    yes only 64 bit is supported read page no 15 of below link.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
    Installation guide.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00004f25-6190-2b10-2c8b-fa419234c28b
    Re: SAP PI 7.1 minimal hardware
    chirag

  • Minimum requirements needed to install  Photoshop Elements 12 on computer?

    I am going to install Elements 12 to a desktop computer. Minimum requirements of computer software needed to install and operate the system?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Raw material requirement needs to be updated

    Hi all,
    We are implementing PP and while configuring the WM/PP interface, I have the following requirement from my customer:
    After creating and releasing production order 1, it creates T.O. for raw material A in the warehouse with qty 10 (for example).
    After confirming the T.O. the raw material moves in the production staging area and is not used yet. Now if we have another Production order 2 using qty 15 of the same raw material, he wants the system to create a T.O. for for the delta qty 5(15-10) because we still have some previous raw material available.
    How can I do that?
    Thanks a lot
    Chaka

    Hy,
    You need to change your checking rule (T.Code OPJJ)
    remove tick from include reservation. or create new checking rule for that perticuller material.
                                            or
    If you want to do it temporary purpose then tick final issue for that material in earlier order but it mean that now there is no need of this material for this perticuller order.
    Regards,
    Dhaval
    Edited by: Dhaval Choksi on Jul 4, 2008 11:59 AM

  • External Hard Drive requirements needed?

    Hello. I'm very new to Mac...I have an external hard drive from my PC and was wondering what the requirements are to run TimeMachine...I realize that I would have delete everything on the hard drive if I wish to use it. It is a Maxtor. Thank you.

    The size of the TM backup disk should be 2 to 3 times the amount of data you expect to back up. That will leave plenty of room for incremental backups.
    The disk will have to be reformatted with the Mac HFS+ (Journaled) file system. Disk Utility is the tool to use for that.

  • Help Required - Need to add current user as superuser

    Is there a way to add my user account to the superuser group in Solaris 10? I need to install some pretty heavy software which involves unpacking and repacking war files so would like to be superuser throughout. I am using a VM and am not concerned with security as it has no network connections and is host only.
    Any advice appreciated as I am a complete newbie - lol!

    While it is truly a bad idea to do this, it is possible. The safest way is to use sudo. The easiest (and worst, most dangerous way) is to change the UID and GID in /etc/passwd to 0 (same as root) for your account. If you do this, and I urge you not to do it, don't forget to change them back to the original values when you are done. It is too easy to be in the wrong directory as root and do a rm -rf *. That simple mistake cost me most of a Sunday fixing the damage years ago. And I'll bet I'm not the only one to screw up like that.
    In deference of this response, its a learning thing. The OP should know what UID and GID can do so as not to spend a day off in the office fixing mistakes. I blew out the entire /etc directory tree when I was a young pup who thought he knew it all.
    --ron                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Platform requirements needed?

    I had already paid for the creative cloud and wanted to start installing the apps. When I tried to do so it said that I am running on a platform that is no longer supported by the app I wanted to install (Ai). I don't know how to change the platform or what it needs to be changed to... help

    Hello,
    I am using a dell intel, however because this is may not be where we want to run it from we were hoping to switch to a mac with Mavericks
    Laisa Gonzalez
    Exceptional Case Services, Inc.
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

  • Help determining minimum system requirements needed

    I plan to buy a used ibook and I am driving myself crazy try to figure out how much RAM I need and the CPU speed. I want to do basic things like internet browsing, to include video streaming (i.e. youtube), MS Office applications and Quickbooks. Any advice would be greatly appreciated.

    You may find that the iBook can't stream YouTube videos smoothly anymore. You certainly wouldn't be able to watch them in HD.
    Depending on the iBook you get (and how lucky you are), your iBook might do alright with streaming.
    For reference: I have an iBook G4 with the 1.07 GHz processor & 768MB of RAM. It does alright with streaming video on Megavideo & YouTube, but the video is noticeably slower than what I see on my MacBook. Veoh.com did work, but I can't stream the videos from abc.com.
    The last iBooks had a 1.33GHz (in the 12") or a 1.42 GHz (in the 14") processor, and have 512MB of RAM on the logic board. You could add up to 1GB to that. I'd say get the fastest one you can afford--and seriously consider getting a MacBook, if that's at all in your budget.
    ~Lyssa

  • Need new PC - Suggestions for system requirements needed!

    Hello!
    I am taking a class in CS4 Design Premium and will be purchasing the software as soon as I buy a new computer.  I've been looking into an Acer or HP Desktop PC (<$700) with the following minimum requirements:
    4GB RAM
    2.0GHz processing speed
    500GB hard drive
    I've read the Sticky posted on this site regarding graphics cards compatible with CS4, but I'd really appreciate suggestions from the users. What do you feel is the best system to purchase for a new web designer?  Are there other components I should be concerned about?
    I truly appreciate any and all input
    Lynn

    You could buy a used printer on ebay, the models here support the HP 02 cartridges:
    Compatible printers (released since July 2005)
    » HP Photosmart 8200 Printer series
    » HP Photosmart D7100 Printer series
    » HP Photosmart D7200 Printer series
    » HP Photosmart D7300 Printer series
    » HP Photosmart D7400 Printer series
    » HP Photosmart 3100 All-in-One series
    » HP Photosmart 3200 All-in-One series
    » HP Photosmart 3300 All-in-One series
    » HP Photosmart C5100 All-in-One series
    » HP Photosmart C6100 All-in-One series
    » HP Photosmart C6200 All-in-One series
    » HP Photosmart C7100 All-in-One series
    » HP Photosmart C7200 All-in-One series
    » HP Photosmart C8100 All-in-One series
    With a page printing volume of only fifty pages a week a CIS system may be overkill.  I print about that on my Officejet 8600 Plus and have only replaced the cartridges once in eighteen months.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • User report requirement, need advise

    Hi,
    I have a report requirement to get damage codes for equipment build month against no. of months in service.
                           damage codes                  equipment month(no. of equipments built)
                        (cy200601 to cy200603)     cy200601 cy200602 cy200603
                                       1                               1                                      
                                       2                               2     `         2              
                                       3                               3               1               1
    i have damage codes, notification month in notifications cube and no. of equipments in equipment cube.  these damage codes should calculate for number of months in service against equipment built month.
    in my report i am filtering the report by equipment built month(cy200601 to cy200603) and  notification month (cy200601 to cy200603)   then i will be getting the report as above.
    user request is to get the damage codes by number of months in service like he want to filter by equipment built month and number of months in service(equipment built month- notification month)   i don't have a field no. of months in service.
    with the current report what i am getting is for equipment built month 300601 i will be getting damage codes for 3 months in service, but for equipment bui;lt month 200602 i will be getting damage codes for only 2 month in service,  and for equipment built month 200603 i will be getting damage codes foronly one month.
    how can i acheive this. Is there any option to get this in the query level if not what are the options.
    Thanks,
    Naveen

    Hi,
    I have a report requirement to get damage codes for equipment build month against no. of months in service.
                           damage codes                  equipment month(no. of equipments built)
                        (cy200601 to cy200603)     cy200601 cy200602 cy200603
                                       1                               1                                      
                                       2                               2     `         2              
                                       3                               3               1               1
    i have damage codes, notification month in notifications cube and no. of equipments in equipment cube.  these damage codes should calculate for number of months in service against equipment built month.
    in my report i am filtering the report by equipment built month(cy200601 to cy200603) and  notification month (cy200601 to cy200603)   then i will be getting the report as above.
    user request is to get the damage codes by number of months in service like he want to filter by equipment built month and number of months in service(equipment built month- notification month)   i don't have a field no. of months in service.
    with the current report what i am getting is for equipment built month 300601 i will be getting damage codes for 3 months in service, but for equipment bui;lt month 200602 i will be getting damage codes for only 2 month in service,  and for equipment built month 200603 i will be getting damage codes foronly one month.
    how can i acheive this. Is there any option to get this in the query level if not what are the options.
    Thanks,
    Naveen

Maybe you are looking for