REquirement not generated for component of Phantom Item

Dear Gurus,
We have a scenario where A,B,C and D are part of multilevel BOM. A is finshed product. B and C are phantoms. D is RM.
A is level 1, B level 2and C level 3. D is component of C.
After MRP run, we found that requirement is generated for Material A. However, corresponsing requirement of material D is not generated. Could you please suggest what can be the problem ?

Hi
The parameters maintained by you are more or less OK.
Your issue is : you are not getting requirements for the part for which you have maintained manual reorder point.
It seems you have run MD02.
If you run MD02 requirements for the component with reorder point will not be geneated because it is consumption based planning& it is not requirment based planning.
For getting rquirement for that either you have to run single item single levelMD03 or total planning for the plant.
This is std SAP functionality.
Hope it is clear to you.
Regards
YMREDDY

Similar Messages

Required component home not found for component 'oracle.as.jrf'

I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you

I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

Excise Accounting document not generated for Imported Asset GR

Dear all,
Excise accounting document is not generated for imported asset goods receipt(MIGO)
but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
Asset is Dr to GR/IR
Process is
1. Create asset purchase order with acct. assignment "A",
2. Customs miro based on p.o.
3. Do GR with excise
4. Post invoice for orginal vendor.
What will be cause of this problem ?
How to solve this issue ?

The above issue may be due to Accout assignmnet -A . Check your accout assignment in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
rewdzzzz is full if correct
Edited by: manu m on Apr 24, 2010 11:11 AM

Accounting document not generating for excise invoice.

Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
Subrat

IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC       CR Credit      PLAAED PLA AED account
DLFC       CR Credit      PLAAT1 PLA AT1 Account
DLFC       CR Credit      PLABED PLA BED account
DLFC       CR Credit      PLACESS PLA cess account
DLFC       CR Credit      PLAECS PLA ECS Account
DLFC       CR Credit      PLASED PLA SED account
DLFC       CR Credit      RG23AED RG 23 AED account
DLFC       CR Credit      RG23AT1 RG 23 AT1 Account
DLFC       CR Credit      RG23BED RG 23 BED account
DLFC       CR Credit      RG23ECS RG 23 ECS Account
DLFC       CR Credit      RG23SED RG 23 SED account
DLFC       DR Debit       MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client)

Accounting document not generating for excise invoice-please help

Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help

Dear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

Requirements not fullfilled for Condition type - Pricing Procedure

When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

Hi Sunil,
Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is, once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of ABAP'er regarding this requirement if it is customized requirement.
We should know the purpose of requirement in condition type.
Venkat.

Three same material document number generated for single PO line item.

Hi,
I found three same material number has been generated for single PO line item. Is there any specific reason for this.
Here is the detail.
PO
LN   qty
10    100
PO history for LN 10
Mat doc          qty               price
5000000000     100               100
5000000000     100               100
5000000000     100               100

see aditya , tables having document number as a primairy key will have a single entry , where as tables having primary key other then material documnet number is having multiple entries . as far as material document is concern , it is only one document in system , now we have to find why it is appearing 3 times . i will test this in my system and let you know .
well thanx for your Cooperation . i will definatly get back to you .
regards
ravikant dewangan

Requirements not fulfilled for EK01 while running DP91

Hi
Time entry is done against the network ,cost is flown to the Project.When i run DP91 to create the debit memo for the project order it throws the error that "Requirement not fulfilled for EK01",
Am i missing something... somebody can help.
Thanks
Alags

Hi,
Check settings in OPD4
Here you have to assign EK01 condition to sales document.
Kapil

WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illust

Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ... WARNING: DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s), 1 warning(s)
WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
----------- Payload: {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Bridge CS6 Extensions\Adobe Output Module\mediagallery\resources\flashgallery\AUTORUN.inf" Error 5 Access is denied.(Seq 237)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 237)
ERROR: DR011: Deleting Registry Key - failure. E(Seq 69)
ERROR: DR011: Deleting Registry Key - failure. E(Seq 66)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Bridge CS6: Install failed

Nobody can help you without proper system info. If it throws a "display requirements not met" then it probably means what it says - your screen is too small.
Mylenium

TimeStream Error (not generated for year 1970)

Dear Experts ,
I am facing a problem with Time Stream .... When i try to open a Planning Book i am receiving the following message:
Timestream (TS ZBRSNP_ZF ) not generated for year 1970
Message no. T9507
Diagnosis
The date is outside the periods maintained in the factory or planning calendar (timestreams).
System Response
The error causes a system crash.
Procedure
a) Regenerate the timestream as far in the future (or possibly the past) as possible
or
b) Use the report ZZTSTRDELE to delete the runtime objects of the timestreams, if changes have been made to Customizing settings. For more information, see SAP Note 169885.
It starts happen after i included Initial Column at Planning Book .... The Factory Calendar that i am using starts on 2006 and ends on 2020 .... The timestream i am using is looking for 2 years in the past and 9 years in the future.
*The message above says that it is necessary to execute report ZZTSTRDELE but i am having some problems while donwloading SAP note. It is possible do delete it manually? exist another way to fix this issue?
Please i hope someone can help me as soon as possible ....
My Best Regards
Mauricio Filho

Hi Sunitha,
We have same type of problem now, could you plz adivise me how to fix this error and where we need to configure to overcome this error.
Thanks in advance
Sreeenivasu

J1INQEFILE is not generating for the month of March 2011

Hi,
J1INQEFILE is not generating for the month of March 2011, we have executed Qefile from 01/01/2011 to 31/03/2011 then file is generating but March 2011 data is not available.
Problem is challans were updated in the month of April 2011 for March 2011 documents, When we executed J1INMIS report with Bank Challan status, documents are coming in the report.
As per our understanding Challan numbers and Bank Challan update should be done in the month of March 2011 but challans and Bank challans were updated in the April 2011.
Please suggest.
Thanks,
Ratnam

Hi Vara,
Please check following thing in the system.
1) When the Challan is created ( March month or April 2011)
2) When the Bank challn updated for the challans
3) If the Challan created in the April and generating returns for the month of March 2011.
4) Check in J1INMIS report for the month posting date 01.03.2011 to 31.03.2011, if the external Challan number is appearing or not for the documents.
5) If the Challan created in the April ask user to revere through J1INREV, and make Challan in the month of march 2011.
Problem will solve.
Thanks,
Ratnam.

Connection has no password, -jdbc.xml file not generated for connection

Hi,
I'm migrating a jdev 10g web application (with EJB) to 11g, i did the automatic migration tool offred by 11g, i'm using the integrated weblogic server but it seems there is a *-jdbc.xml file missed, and it must be generated, this is the log file of the start of server :
IntegratedWebLogicServer started.
[Running application SAB_ADMIN on Server Instance IntegratedWebLogicServer...]
[09:14:15 AM] ---- Deployment started. ----
[09:14:15 AM] Target platform is (Weblogic 10.3).
[09:14:18 AM] Retrieving existing application information
[09:14:19 AM] Running dependency analysis...
[09:14:19 AM] Deploying 4 profiles...
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ViewControllerWebApp.war
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war
[09:14:25 AM] Wrote EJB Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelEJB.jar
[09:14:25 AM] WARNING: Connection DBConnectionSAB has no password. DBConnectionSAB-jdbc.xml file not generated for connection DBConnectionSAB.
[09:14:26 AM] Wrote Enterprise Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN
[09:14:26 AM] Deploying Application...
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.065--ServerSession(40464643)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.mergeEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.persistEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.mergeEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.persistEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.mergeEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.persistEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war. Please make sure that the annotations are valid. The error is oracle.adf.view.faces.webapp.ResourceServlet>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1287044066833' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:404)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.adf.view.faces.webapp.ResourceServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
     Truncated. see log file for complete stacktrace

This is the content of my web.xml file where i found the markup <servlet> and i tried to run without the first one but the error still like it was :
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<description>Web Service MyConnexionServiceSoapHttpPort</description>
<display-name>Web Service MyConnexionServiceSoapHttpPort</display-name>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<servlet-class>oracle.controll.ConnexionBaseDeDonnees</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>ResultatRequetePort</servlet-name>
<servlet-class>oracle.controll.ResultatRequete</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<url-pattern>MyConnexionServiceSoapHttpPort</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ResultatRequetePort</servlet-name>
<url-pattern>/ResultatRequetePort</url-pattern>
</servlet-mapping>
Thanks...

REquirement not generated for component of Phantom Item

Similar Messages

Maybe you are looking for