Requirement to add new fields

Hi,
I got a change request as follows:
Infocube is getting data from an ODS.
There are 2 KFs in ODS which has to be added in Infocube.
Pls someone let me know the step by step procedure to do this.
Thanks & Regards
AP

Hi,
You can follow Ravi's method....or if you want to maintain the data as it is in the cube...then load the two KF in the Cube as it is ....and created a calculated KF at reporting level to suffice the result.....
Depends on you requirement as this calculation will b performed at the runtime...
while storing in the cube will be at loading time...
u got to know the trade off...
- Amit

Similar Messages

Requirment to add new field in kna1 and maintiane using XD02

hi
i have a requirment need suggestion on that
1) the requirmen is to add a new field email id on kna1 standard table
( it can be done by append structure pls give me full steps to do it and complication involved in it)
2) now is it possible that user able to maintiane this new field by using Tcode XD02
will it be visible there if we use a new zappend structure and how the data will be populate in that field by Xd02 do any change required in Xd02
3) we have to create another tcode for display of these threee fields kunnr name1 and email id that will be done by moudle pool again so is there any compication in thati method later is above steps are done
main th ing is how data will be populated in kna1 using xd02
regards
ARora

hi Seshu
my main problem in this is that
since we are using append structure how data wil be populated in the kna1 table in this new field email id?
as we need to find some user exists to do so as it is a structre not a field so population of data is a problem in that?
2) and wheter i should new ztable but customer is asking to add in the standard table and maintian by some xtransaction whetehr it is possible or not?
#) also can us suggeest on the primary keys i should give for t his data types and records as pasted below if i create a new table and should i check init check box also?
kunnr        email id                                       name1
100400     [email protected]      TECHNOLOGY HONG KONG LTD
100400     [email protected]      TECHNOLOGY HONG KONG LTD
100400     [email protected]     TECHNOLOGY HONG KONG LTD
100400     [email protected]               TECHNOLOGY HONG KONG LTD
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]                      INDUSTRIAL CO. LTD.
100550     [email protected]                      INDUSTRIAL CO. LTD.
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]                       INDUSTRIAL CO. LTD.
regards
Arora

Requirement to add new field in Location Tab of Service order

We have a requirement in which it is needed to add anew field in Location Tab of Equipment and Service order. For Equipment part , we have added the field via Enhancement ITOB0001 and activating the field via "Set View Profile for Technical Objects".
But for Service order part, we are not able to add the new field in the Location tab , please suggest how can we achieve this.

Hi Deepika,
If you are not particular about having it in Location tab use Screen-Exit provided in the Enhancement IWO10018 to add an additional tab to host your custom fields. as under:
ABAPer will be able to readily follow these steps
Steps will be,
1. Create a Data type to capture the your custom values. (SE11)
2. Include your Zfield (with this datatype) through in the include structure CI_AUFK of the Order Header table (AUFK)
3. Create a project with Tcode CMOD and assign the enhancement above (IWO10018)
4. Go to Components and Click on Screen Exit
5. Here Go to Screen-painter (Blue Arrow named Layout) , Create your Field screen-box, field Text field and field Input field. In the field input field Name you should use the above Zfield details (table-field)
6.Activate the project CMOD and come-out.
Run IW31, you will see an additional tab like shown above. But here the field is nothing.
We haven''t told the system what is to be filled here.
For this in continuation to the above steps between 5 and 6, insert this step.
5a. Write your code in Function Exits : EXIT_SAPLCOIH_018 and EXIT_SAPLCOIH_019 of the same enhancement (IWO10018.)
Code to be written in exit 18:
move-corresponding COCI_AUFK_IMP to AUFK.
Code to be written in exit 19:
move-corresponding aufk to COCI_AUFK_exp.
After this exercise your Z-field will be visible in the Enhancement Tab as shown in the picture in the beginning. Now your values will be saving to AUFK table.
So, this is completely an ABAPer job.
Hope this information helps you.
Jogeswara Rao K

Add new fields in CRM_DNO_MONITOR

Hi,
I have a requirement to add new fields to screen of transaction_code CRM_DNO_MONITOR. I found out the badi name "CRM_DNO_MONITOR" which uses interface "IF_CX_CRM_DNO_MONITOR" implemented in class "CL_EX_CRM_DNO_MONITOR".
I tried to debug tcode CRM_DNO_MONITOR to check for which action the methods in the BADI is called, it looks like it is not calling at all and generates the screen.
Please suggest how to add more fields in the screen using this BADI or any other way to add new fields.
Thanks
Prasad

Hi,
This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
Please check this thread:
Reg : CRM_DNO_MONITOR
Regards,
Sanjai

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

Report RCATS_DISPLAY_ACTIVITIES to add new fields

Hi SAP Gurus ,
I have a req to add new fields from a table ZCS_ENGINE to the report RCATS_DISPLAY_ACTIVITIES .
I copied the program and create a Z report ZRCATS_DISPLAY_ACTIVITIES , but i am facing difficulties to add new fields
to the fieldcatalog.
Can u please tell the procedure to add fields into the layout and show the output ..
Advance Thanks,
Thanks,
AMS
Moderator message: too vague, please describe problems in all technical detail when posting again, what is "difficulties", is it classical, ALV, class based ALV, what have you tried so far, please search for available information on fieldcatalog and layouts before asking.
Edited by: Thomas Zloch on Oct 19, 2010 3:28 PM

hi,
as per your requirement (3 fields you mentioned )not inthe standard .you have to contact technical team for new report or enhance ment.
regards
muthuramand

Add new field in Web UI

Hi
I want add new field in view GS_CM/AddDoc.
I have studied a documentation http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/509a21a9-24be-2b10-d39b-de4c6b3fc222
but for a component GS_CM the button "Create New Field" is inactive.
Can I add the my field in views GS_CM/AddDoc ?

Hi,
open component GS_CM in tx BSP_WD_CMPWB.
Here open your view AddDoc.
Before you will be able to add new fields you have to enhance this view (right mouseclick on view).
Now navigate to the context nodes. This view has 3 context nodes. Decide where to add your and add it using the assistant by right click on "Attributes". Before you do this check in the UI configuration the available fields. Maybee there is already the field available you require.
I hope this helps.
Regards
Manfred

How to add new fields to Profit center screen (KE51)

Dear All,
I have a requirement that to add new fields to the Create Profit center screen KE51.
I couldn't find the user exits for the same.
Please help me in this.
Thanks.
Ravi

Hello Ravi,
I must respcetfully disagree(with other posts) that it is not possible to extend CEPC. In our system we have added an append with two new fields to CEPC. Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres. To do this it was necessary for us to add a button to the create/modify screens. It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect). I am being very vague here because even though it is posible I would not recommend implementing this solution. It was very time consuming and could be risky if you miss something. There is a reason why you can find so little information in SDN and other places about how to do this. Other, including myself have tried but it was painful.
I know that this does not help very much.
Regards
Greg Kern

How to add new fields to a data extract

The following data extract program generates an output file which is displayed using a publisher template as a check format report.
Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
Thanks

Do anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.

How to add new fields in Web UI where AET is not applicable

Hi,
We tried to add new fields using AET, but surprisingly 'Create Field' is in disabled mode in AET Configuration.
We are trying to add custom fields to the view GSTEXT/notes. But we could not do that.
what are the other possible ways to add custom fields and the required configuration for that.
Your help and suggestions will be highly appreciated.
Best regards,
Venkat

Hi,
Thanks for the response, We want to add two custom fields in Component / View (Gstext / Note).
We are trying with AET tool, But in AET tool configuration window, ''Create Field'' is in not in active mode (disabled mode), we can see it but it is not clickable.
In order to proceed and create new fields it has to be in enabled.
Kindly suggest me how to activate this field. your suggestions will be highly apprecaited.
Thank you
Venkat

How to add new fields to the DME file in F110

Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AM

Hi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item   TYPE dmee_paym_if_type,
        l_fpayp   TYPE fpayp,
        l_fpayhx TYPE fpayhx,
        first_flag TYPE c,
        lv_lifnr   TYPE lifnr,
        voucher_id TYPE string,
        voucher TYPE string,
        invoice_id TYPE belnr_d,
        voucher_len1 TYPE i,
        voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
        xblnr TYPE xblnr1,
        belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
        lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM

CRM - Add New Field in Competitor Product Screen

We are looking for the right way to enhance the competitor product screen (object prod_cp) in CRM 7.0. We have explored several options and we would like to have a confirmation that we selected the right option for the CRM level we are on now. We checked enhancement options via eewb and aet. However, in transaction axtreg there are 129 objects that can be enhanced but object prod_cp is not part of that list so I assume both tools mentioned cannot be used to enhance the competitor product screen (we want to add new fields and put business logic behind it). Is this a correct conclusion? I based the conclusion on post below:
AET enhancement capabilities
Found a OSS note 1088910 which looks like something we could use instead in CRM 7.0:
appl enhancement          component view for customer
Competitor products (PRDCP)     PRDCPOV/CustomHeader
Is this correct?
If this is not correct, how can we enhance the competitor product screen without changing the sap standard code (like append a Z structure to table comm_product_idx and then....are there any enhancement sports for this screen where we can add our custom code?). Do we have to use the framework enhancement concept?
Also found OSS note 1448299 that provides information about business functions for the Application Enhancement Tool (AET) in SAP Enhancement Package 1 for SAP CRM 7.0 and I saw that we will be able to enhance the competitor product screen as soon as we have upgraded to Ehp 1 just by switching on business function crm_inf_1. Is that correct?
Rgds,
Josephine

Hi Josephine,
You can enhance any standard CRM 7.0 component. follow this wiki on how to enhance standar CRM7.0 components
http://wiki.sdn.sap.com/wiki/display/CRM/HowtoGuide-EnhancingtheUIinCRM+7.0
You have two options to add new field to the competitor product screen
1. Using AET. Application Enhancement Tool, require very limited technical knowledge and i believe even function person can add a new field on the webui screen using AET. Search sdn with AET and you will find lot of information.
2. Create a z table with the new field value and product id (unique key).
    Create a value node in the standar component.
    On load of the webui screen fetch the details of the new field from the ztable and display it
    On the save of the webui screen if the value of the new field has changed update the z table.
Regards

Can we add new field in standard idoc segment ?

HI all,
My requirement is to add new field in segment named E1EDL44 (Idoc named - DELVRY03).
Please guide me how to proceed.
thanks
manish

Hi Manish,
You cann't add any new fields into any of the standard segments like E1EDL44 segment.
Inorder to achieve this you need to do the following:-
Create a new segment and with the new fields and this new segment should be added as a child segment to the E1EDL44 segment. You need to write a piece of code to populate that new segment in the userexit. You should create a extension for your basic type DELVRY03. This way you can achieve this scenario.
Thanks,
Mahesh.

Add new fields to default view when creating fields via REST in sharepoint 2013

Hello,
When I add new fields via REST in a list, they don't appear in the default view for that list.
Here is my code in case you need it:
public function creeChamp(nomListe:String, champ:String, type:int, requis:Boolean):void
postURL.data = JSON.stringify({ '__metadata': { 'type': 'SP.Field' }, 'Title': champ, 'FieldTypeKind': type,'Required': requis, 'EnforceUniqueValues': false,'StaticName': champ});
thanks

You need to add the field to the view as well.
Here is the API.
Our code looks pretty different because I'm working in AngularJS, but here's a snippet from a working example:
$http.post(siteUrl + "/_api/web/lists/GetByTitle('" + listName +
"')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
// POST data is empty for this request
}, getPostConfig())
.then(function (response) {
deferred.resolve("Added column to view");
.catch(function (response) {
deferred.reject('Error ' + response.status + ': ' + response.data.error.message.value)
Bottom line is you just POST to this URL however you normally do - except no data:
"/_api/web/lists/GetByTitle('" + listName + "')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
Hope this helps!
- Bob

Add new field in Work Order Component Tab

Dear Experts,
Really need your advice to solve my client requirement related to Work Order. The requirement is to put status code and estimated date of returned material in WO Component Tab.
And because we almost use all of fields in Component. So i'm trying to know, is there any configuration (in SPRO - if any) by adding new custom fields in Work Order (WO) Component Tab?.
Or is there any enhancement (EXIT) to add new fields in WO?
Please advice.
Thanks.
LN.

Hi Anthyodaya,
Try this screensexit not sure if this is what you are looking for
EXIT_SAPMV45A_001( Take help of ABAP for this)
Hope this helps.
Thanks and Regards
Rohit
this Question is raised by you twice..please close one.

Requirement to add new fields

Similar Messages

Maybe you are looking for