Requirements assignment Tab
Hi,
I am looking how to enable the Requirements assignment Tab in the Operation Screen of the Order. I think this should be a configuration settingt but I haven't found where. Any help will be appreciated. Thanks in advance.
Mithun
We had the same requirement and couldn't find a suitable function module to update the splits.
From memory the ABAPers eventually solved the issue by writing the data directly into the tables.
You could try OSS..
PeteA
Similar Messages
-
Requirement assignment tab in PM order
Hi, Gurus
I just want to know ,when and how i can use requirement assignment tab i PM Order . How it can be used.Is there any config sttings for it.
When i am cretating WC for activity based costing , Requirement assignemnt tab is not there .Hi
There is no config required for requirement assignment tab
You can split the work using the employees.. and assign particular work hours to them
- Pithan -
Requirement Assignment Tab on Work Order
Hi Gurus,
I am working on capacity planning.I am creating an order & putting some requirement let say 2HR. with the help of capacity levelling in CM25, I am dispatching the manpower against that req, which is getting updated in PM order on requirement assignment tab.After conpletion of job I am doing techo. Now my qyery is :
1. During teco, requirement assignment tab is not there in order.
2. If I am cancelling that Teco of order, manpower which is udpated thorugh CM25 in order, is getting clear.
Is this the standard system behaviour, if yes, please guide me what is the reason. In case of no, how to solve this.
Thanx in advanceHi,
As mentioned, it is expected that requirement assignment data is deleted at time of technical completion. Documented in KBA/Note [1634839|https://bosap-support.wdf.sap.corp/sap/support/notes/1634839].
-Paul -
Requirement assignment tab in Maintenance Work order
Hi Gurus,
I have a query ..I want to know the customizing settings for Requiremnt assignment tab in internal operation tab for internal operations in maintenance work order .
Thanks ,Hi sundar ,
This Path is available in ECC 603 and we are using ECC6 . so not able to get the Path .
Anyways Thanks for your Help .
I have one more query regarding this:
When I assign one Resource to Reqmnt assignment tab and give any date of friday then the date is automatically switches to Monday's date . the Work schedule for that person is from Monday to Friday but then also it shifts the date to Monday .
Can you please suggest on this .
thanks !! -
Work Order Requirements Assignment
Hi PM Gurus,
I have a situation and am hoping some of you have seen it before.
I have a created a maintenance work order from a notification. On the work order Operations tab I choose an operation and assign resources on the Requirements Assignment tab (on the bottom left of the screen). Everything is good so far...and the workorder is saved.
When the workorder is TECO'ed in another step all the requirements assignment for the operation is lost.....am I missing a piece of configuration or is this normal behavior....have any of you seen this happen before and overcome it.
Please advise.Hello all
I got this situation that user TECO this work order by mistake, and later he reinstate this, meaning cancel TECO, requirements assignment for the operation is empty , and user would like to expect to see this planned data once again, do you have some solutions?
BR,
Michael
Edited by: Michael Gu on May 24, 2011 7:31 AM -
FM/BAPI to update requirements assignment on a PM order
Hello,
I am working on a project which involves building interfaces between a client's SAP ECC system and a third party scheduling system. The orders are created in SAP, interfaced to the third party, where they assign resources and schedule appointments. Hence we need to build is inbound to SAP, to update the "requirements assignment" tab of PM order operations - transaction IW32.
I have looked at BAPI_ALM_ORDER_MAINTAIN, but this doesn't provide this specific functionality.
Does anyone know if there is any other type of function module which enables this to be created/updated?
The data appears to be stored in table KBED - capacity requirements.
Many thanks in advance,
PeterHi Balaji,
After lots of search and trials, I have gave up on the function group CY_BT*.
I eventually used direct update on the database tables of the Requirements Assignment.
Using SQL Trace and Runtime Analysis of the transaction IW31/32, I have been able to imitate the standard SAP process for creation, update and deletion and the effect of every scenario on the database tables:
KBED Capacity Requirements Records
KBEZ Add. data for table KBED (for indiv. capacities/splits)
KBKO Header Record for Capacity Requirements
Combine that with locking mechanism, you will get your results.
Just build a Z-'BAPI'. The best cost-benefit balance, as far as I am concerned.
Good luck,
Kamal. -
Req Assignment Tab page not coming for Service order
Hi All,
I am working on simple service order SM01 type scenario. where in i am entering the operation & time for the same.
Now when i am going in to operation detail screen . I am not able to find out the requirement assignment tab page.
Strangely when i am using same reference object & creating the Maintenance order PM01 & doing the same as above it is showing the req assignment tab page.
Regards,
AmarHi , I have found out the solution for the same.
I have found that the external scheduling flag is
set for order type SM01 in customizing. Since this is set, requirement
assignment tab will not be populated as this will be taken care
externally.
Remove the flag in below customising path.
Plant Maintenance and Customer Service--Maintenance and Service ProcessingMaintenance and Service Orders-Scheduling--External Scheduling--Define for Each Order Type
Once this flag is removed for order type SM01, this tab will appear
for service orders.
Regards,
Amar -
Reqirement Assignment Tab in Maintenence order
Dear Experts,
I'm struggling to bring the "Requirement Assignment Tab"in the maintenance order, altough all the pre-requsits in the work centre like Other formula SAP008/SAP004/SAP00 distribution formula have been maintained including the HRMS is also maintained in work centre.
I have checked most of the links/threads on google but no success, could some one please help me out is some other configuration is there.
Sorry forgot to add I need this for Multi Resource Planning so that I can use it in splits of the assignments.
Your valuable inputs are welcome.Garry,
You get a warning message if you get them the wrong way around.
The standard settings for PM/CS are:
Capacities tab: Other formula: SAP008
Scheduling tab: Other formula: SAP004
Costing tab: Formula key for costing: SAP008
They should work as standard - assuming no one has changed the formula settings in the IMG.
PeteA -
Requirements assignments Tab is not appearing
Hi
I maintained work, duration for an operation
HRMS is active for my work center
But still the Requirements assingment tab is not coming. Why ?
ThanksHi
The problem is
I activated External scheduling for this order type
On removing the indicator the requirements assignment tab appears -
PO Account Assignment Tab in ECC - with Split Accounting
Hello,
We currently are using Funds and WBS Elements within our SAP system. When both a fund and a WBS Element are used on one line item within the shopping cart, I am able to see all of the information (fund, wbs element, fund center, cost center, commitment item, etc). However, after the purchase order is created and transmitted to ECC the "Account Assignment Category" is marked as "X - All aux.acct.assgts." and the account assignment tab only has the following column headers:
- Sequential Number of Account Assignment
- Quantity
- Distribution Percentage in Case of Multiple Account Assgt
- Cost Center
- G/L Account Number
- Order Number
- Asset Subnumber
- WBS Element
- Sales and Distribution Document Number
- Sales Document Number
- Delivery Schedule Line Number
- Unloading Point
- Goods Recipient/Ship-to Party
- Deletion Indicator: Purchasing Document Account Assignment
I can see that the fund is within the EKKN table (Field: BP_GEBER) but for some reason ME23N does not have this field in the Account Assignment tab when the category is "X". How do I add "Fund" into the Account Assignment tab so that it will be visible within ME23N?
Thanks,
KatieIMG \ MM \ Purchasing \ Account Assignment \ Maintain Account Assignment Categories
Select details for AAC 'X' and view field settings below. Set Funds \ Funds Center to required setting e.g. Display. -
Sales order no and line item no in account assignment tab of line item no.
Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AMHi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali. -
How to Grey out cost center column in me22n screen(Account assignment tab)
Hi All,
I have tried many ways to do grey out cost center column in account assignment tab of ME22N.
i have created implementation for this class and method.
Class:CL_TABLE_VIEW_MM_2
Method:PBO_TC_LINE
Below is the my code snippet.Kindly let me know any suggestions.
data: l_tc type char100.
data: l_tabix type i.
l_tc = '(SAPLMEACCTVI)DYN_1000TC-COLS'.
FIELD-SYMBOLS:<fs_tcdata> type any TABLE,
<fs_wa> type any ,
<fs_lwa> type any,
<fs_screen> type any,
<fs_input> type any,
<fs_active> type any,
<fs_output> type any.
*data:fs_wa type SCXTAB_COLUMN_IT.
ASSIGN (l_tc) TO <fs_tcdata>.
LOOP AT <fs_tcdata> ASSIGNING <fs_wa>.
l_tabix = sy-tabix.
ASSIGN COMPONENT 'INVISIBLE' OF STRUCTURE <fs_wa> TO <fs_lwa>.
ASSIGN COMPONENT 'SCREEN-NAME' OF STRUCTURE <fs_wa> TO <fs_screen>.
ASSIGN COMPONENT 'SCREEN-INPUT' OF STRUCTURE <fs_wa> TO <fs_input>.
ASSIGN COMPONENT 'SCREEN-ACTIVE' OF STRUCTURE <fs_wa> TO <fs_active>.
ASSIGN COMPONENT 'SCREEN-OUTPUT' OF STRUCTURE <fs_wa> TO <fs_output>.
IF <fs_lwa> = space.
CASE <fs_screen>.
WHEN 'MEACCT1000-KOSTL'.
<fs_input> = 0.
ENDCASE.
endif.
ENDLOOP.
Regards,
HiriyappaAs I can't see any complicated scenario in your requirement. So I suggest you can achieve this by simple standard configuration.
Go to OME9, double click on the Account assignment category and make the field as Display.
Then check in your PO.
But I doubt, your requirement can not be simple like that.
So either you didn't know the settings or your requirement is different or you are just trying to learn that can it be possible via coding.
Let us know the appropriate reason for set it as display. -
Order field at item level Account Assignment tab in Inquiry
Dear All,
What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
Is there a possibility, we can suppress the Order field.
Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4 and in material master.
Regards,
Venkatitem category is determine from Item Catergory group in Mat master and Sales Doc Type.
-
Gl account require assignment to Co object
Hi
while doing PGI .it is giving error of "account require assignment to CO object"
please clear where to assign Co object & how.
do i need to assign the Gl in okb9 seetinghi,
First identify GL account which you have assigned in OBYC . then go to FS00 and enter your account no. and press on Edit Cost Element in that there is 3rd tab page Default account assignment there give cost center and save it.
Now try once again.
thx.
Ganu -
GL account requires assignment to CO object
Dear All,
While preparing excise Invoice the accounting document is not getting released. On going to T-code VFX3 and tyring to releasing the document message comes as "Account 00000 requires assignment to CO object".
Kindly guide on this issue .
Thanks in advance.Hi
I think it comes form the Account assignment tab in Item / header level of sales order where we mantain the Business Area.
just check the settings (Path -
ENTERPRISES STRUCTURE>ASSIGNMENT>SALES AND DISTRIBUTION>BUSINESS AREA ACCOUNT ASSIGNMENT
Maybe you are looking for
-
How to include the simbol % in a flash chart
hello everyone Do you know how to include the simbol % in a flash chart? I am using a 3D flash chart. This simbol obviously would be after that number of percentage. Do I must modify the chart XML adding some after that {VALUE} ? Any help would be ve
-
OBIA - Answer error : [nQSError: 27037] Unresolved level
HI, We installed the OOTB OBIA sandbox and I'm unable to create a column formula with the time function AGO in Answer. I tried : AGO("Fact - Sales Invoice Lines"."Invoiced Amount", "Core"."Date"."Year",1) where "Core"."Date"."Year" is from the BMM hi
-
During the surfing in App store with Mac Book air 13" (2013) appears "app store closed unexpectedly", so the app store closes and I have to open the app again but the same problem happens over and over again after few seconds I have opened the app st
-
And is there someone who can help me resolve this problem? I've uninstalled iTunes but even when I put it back on, it says the same thing over and over again.
-
Recommendation on how much RAM on 8-core to run Parallels & XP?
Hi I ordered my 8-core with 1Gb of RAM planning to expand it by buying an additional 2GB through Crucial...(cheaper than through Apple) 1. Would 3GB of RAM be enough to concurrently run OSX+apps and Parallels with XP with a negligible speed impact 2.