Requirements for Cisco Jabber Applications

Hi,
I have to setup a lab enviornment for demonstrationg the Jabber technologies for our client.i am really new to jabber technologies and as per my understanding its a Softphone that we can install in PC and Mobile and has the features such as IM,Presence and Web-ex.
For my demonstration I am looking to Install the softphone in a windows PC.
My doubt is what all software combination required for Jabber technologies??
1)Either CUCM+Presence+Jabber(What Versons??)
2)CUCM+Jabber.(Versions??)
We have 3 MCS in our lab and running CUCM version 7.0.If we need a later version for this to support ??
I serached in google for good document but no luck.....Please give me a good documents for integeration and configuration for this requiremnets.
Thanks in advance.
Nithin louis.

Hi Nitin,
May be you can follow these links to get started:
https://supportforums.cisco.com/docs/DOC-23292
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_00.html
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/8_6/b_Cisco_Mobile_for_Android.html
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_01.html#CJAB_TK_D698EA8E_00
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_010.pdf
Hope this helps.
Please rate helpful posts!!!
regards,
Abdul

Similar Messages

Contacts search for cisco Jabber for Windows & MAC

Hello,
Please assist on given below query !!
System Deatails of CUCM & IM Presence Server
CUCM:
1> System version: 9.1.1.20000-5
2> VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with IM & Presence
IM & Presence:
1> System version: 9.1.1.20000-5
2> VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with CUCM
Requirement:
1> User Search base for Cisco Jabber for Windows & MAC Client
2> Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
Every reply would highly Appreciated!!

Hi Karthik,
Thanks for your reply!
I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
1> The contacts does not appear when I perform a search
2> Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
3> Please also provide If any specific system requirement for LDAP server.
4> Is it possible without LDAP integration?
It is really urgent and every post would highly appreciate..........

Dll files required for developing BAPI application!

Hi,
Can anybody send me the following dll files which are required for developing BAPI application.
librfc32.dll (at least 46D, build 263)
jRFC11.dll (JDK 1.1)
jRFC12.dll (JDK 1.2 and 1.3)
Regards,
Bala Raja

Hi Deepak,
Can you tell me which JAR files you added to resolve build time errors.
I am facing the following errors after importing Std masthead from portal7.3.
Can not find the tag library descriptor for "prt:taglib:tlframework"
Can not find the tag library descriptor for "prt:taglib:tlhtmlb"
componentRequest cannot be resolved
ILocalesListService cannot be resolved
ILocalesListService cannot be resolved to a type
noBtn cannot be resolved
Syntax error on token "}", delete this token
Syntax error, insert "}" to complete Statement
The import com.sap.portal.core cannot be resolved
The method enableCloseAll() is undefined for the type NavigationEventsHelperService
The method getDynamic(String, null) is undefined for the type IUMParameters
The method getDynamic(String, String) is undefined for the type IUMParameters
yesBtn cannot be resolved
Please give your mail Id if possible.
Regards,
Sumangala

Minimum system requirements for installing Oracle Application Testing Suite

Hi,
Can anyone tell me what are the minimum system requirements for intalling Oracle Application Testing Suite?
Thanks in Advance

From the release notes (12.1.0.2).
System Requirements
Oracle Application Testing Suite has the following system requirements:
4
3.1 Oracle Functional Testing/OpenScript
Oracle Functional Testing’s OpenScript scripting platform has the following system
requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008
■ Memory: Minimum 1 GB
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 4 GB minimum
■ Browser: Internet Explorer 7.x, 8.x., 9.x and Firefox 3.5/3.6, 6.x
3.2 Oracle Load Testing
Oracle Load Testing has the following system requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2. Oracle Enterprise
Linux 5.1, 5.2 64, 4u8.
■ Memory: Minimum 2 GB.
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 10 GB minimum free (at least 3 GB free on the system drive)
■ Browser: Internet Explorer 7.x, 8.x, 9.x, Firefox 3.5/3.6, 6.x
■ Database: Oracle EE 10g or 11g, XE 10g
■ Application Server: Oracle WebLogic 11g (10.3.5.0). Oracle Application Testing
Suite requires the standard WebLogic Server installation (which includes jrocket
jdk.). It does not support generic versions of WebLogic Server installation (such as
those that use wls1035_generic.jar).
■ Oracle Load Testing Agent also supported on Linux 32-bit & 64-bit, in addition to
Windows 32-bit and 64-bit operating systems listed above
Note: These are minimum requirements only and actual
requirements for the Oracle Load Testing Server will vary depending
on the size and configuration of your load test. If you are running
larger load tests, of greater than 1000 Virtual Users, you should
consider deploying Oracle Load Testing on a faster server class
machine with additional RAM recommended.
Note: Oracle recommends running the Oracle Load Testing Server
and Agents on separate systems for production load testing. The
amount of memory required on the Oracle Load Testing Agent
systems may increase based on the number of Virtual Users that will
be assigned to run on each Agent. For more information, visit the
QA/Testing Technology Center on Oracle Technology Network or
contact your Oracle representative.
5
3.3 Oracle Test Manager
Oracle Test Manager has the following system requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2. Oracle Enterprise
Linux 5.1, 5.2, 4u8.
■ Memory: Minimum 2 GB.
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 10 GB minimum free (at least 3 GB free on the system drive)
■ Browser: Internet Explorer 7.x, 8.x, 9.x, Firefox 3.5/3.6, 6.x
■ Database: Oracle EE 10g or 11g, XE 10g
■ Application Server: Oracle WebLogic 11g (10.3.5.0). Oracle Application Testing
Suite requires the standard WebLogic Server installation (which includes jrocket
jdk.). It does not support generic versions of WebLogic Server installation (such as
those that use wls1035_generic.jar).
3.4 Additional Notes
The following are additional notes about system requirements:
■ The ATS installer can automatically install and configure an Oracle 10g Express
Edition (XE) database for use with Oracle Load Testing and Oracle Test Manager.
Although this is useful for demos, for production usage switching to Oracle's 11g
Enterprise Edition database is highly recommended. Oracle 11g Standard Edition
and Oracle 10g EE or SE are also supported.
■ System memory requirements do not take into account other processes that may
be running and using memory on your system, reducing free uncommitted
memory available.
■ When installed on the same machine, Oracle Load Testing and Oracle Test
Manager will run on the same server and use shared system resources. Oracle
Functional Test/OpenScript is a separate application that have its own memory
and CPU requirements.
■ The ATS products will run in 32-bit compatibility mode when installed on 64-bit
operating systems. It is possible for Oracle Application Testing Suite to be installed
on an existing WebLogic server. However, if the pre-installed WebLogic server is
JRockit plus WebLogic (64-bit) environment, some functions in Oracle Application
Testing Suite will not work properly. Oracle Application Testing Suite can be
installed on a 32-bit WebLogic, but not a 64-bit.
■ The legacy Oracle Functional Testing, VB-based scripting platform and associated
components (such as Job Scheduler) are no longer included with the ATS installer
Note: These are minimum requirements only and actual
requirements for Oracle Test Manager will vary depending on the
quantity of test assets stored and number of concurrent users
accessing the application. If you have a large quantity of test cases,
requirements or issues stored and/or are deploying Oracle Test
Manager for a team greater than 10 users, you should consider
deploying Oracle Test Manager on a faster server class machine with
additional RAM recommended.
6
starting with version 9.2. Customers that still require this product should

Softphone feature for Cisco Jabber Client

Hello everyone,
I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
   Soft Phone Server
Server Address:           cucm02.mycompany.net
Server Port:                     2748
Server Protocol:           --
Device:                               --
Line ID:                               --
Status:                               Disconnected
Any help or thoughts on this would be greatly appreciated! Thanks!
Tony

Aaron,
Here's the bit I found interesting from the reporting function:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- begin:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Select error
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Can't get packet, retrycount=3
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ReceiveData -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CPhone::setPhoneMode -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] - CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
Thanks,
Tony

Defined Groups for Cisco Jabber Group Chat

I dont think it is possible based upon this document but wondering if anyone knew any secrets out there. Is it possible to create predefined groups in Jabber for Windows preferably as defined in Active Directory or on the client side? We want to have chat groups automatically created for Sales, Engineering, etc. so users dont have to add other chat recipients users manually and can reach any engineering team member without knowing who is actually part of the engineering team for example.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9/JABW_BK_C56E95B6_00_feature-guide.html

Hi,
Jabber for Windows 9.7 supports Persistent Chat end user participation.
Our next Release, 10.5 will add Room Administration and Moderator features, including room creation.
Persistent Chat Rooms
Users in your organization can use persistent chat rooms to share ideas and information in a chat room. The chat rooms look like group chats, except that the chat rooms stay active even after participants leave the room. When participants come back to the room, they can scroll back to read the messages that they missed.
Participants can manage their chat rooms by browsing the existing rooms and joining open rooms, or being added to a room by an administrator. When they are in the chat rooms, participants can create mentions for other users, which notifies the mentioned user if they are a member of the room. They can also search chat rooms for particular keywords or senders by creating filters.
Administrator tasks include creating, configuring, and deleting chat rooms, and adding or removing users from chat rooms. In this release, chat room administration and moderation must be performed with a client that supports persistent chat room administration. Cisco Jabber for Windows will provide administrative capabilities in a future release.
Cisco Unified Communications Manager IM and Presence Version 10 is a software prerequisite for persistent chat rooms.
For end user information about persistent chat rooms, see the chapter on Chats in the Advanced Feature Guide.
For administrator information about enabling persistent chat rooms, see the Installation and Configuration Guide and the Server Setup Guide.
Link for the same:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_CF8F083D_00_cisco-jabber-for-windows-97/JABW_BK_CF8F083D_00_cisco-jabber-for-windows-97_chapter_00.html
Regards,
Swathi

Device Name for Cisco Jabber

I found a document on Jabber Developer that explains all steps for the Cisco Jabber CUCM Setup Guide (http://developer.cisco.com/web/jabber-developer/jabber-sdk-cucm-guide), the phone type must be Cisco Unified Client Services Framework, everything fine, but says that the Device Name should be as ECP<username> when original setup guides says that must be as CSF<username>.
My users setup Device Name are as CSF<username>, but just to follow a best practice, should I change all Device Names to ECP<username>??
Regards,
Juan Carlos Arias

There's another thread on which someone mentioned some problems when using ECP for device name. Windows for jabber method of operation is the name of it. Do you have any configs using ECP??
Since I already have this in m lab working as expected i'll configure a couple of users with ECP and see if something changes, just wondering if you have something configured with ECP already.
Sent from Cisco Technical Support iPad App

A list of supported Android Phones for Cisco Jabber Client.

Hi there,
I opened a discussion before about the Cisco Jabber Client for Android phones.
This product from Cisco is only official support bij a several mobile Android telephones. (very poor)
As everyone knows is that the mobile market is continious in development. Since a half year the official support phone list is still the same, but a lot of new Adroid phones are now on the market.
It's even so worse that some of the Cisco supported phones, are not available anymore in the market.
- Samsung Galaxy S2 becomes a Samsung Galaxy S3
- Samsung Galaxy TAB is still there
- Samsung Galaxy S (are not available anymore) The S1 or S Plus are now becoming the Samsung Galaxy S Advanced.
At what are the alternatives?
Still the list on the documentation is out-dated.
See:
Samsung Galaxy S International (GT-I9000) with Android operating system (OS) Version 2.2.1 or 2.3
Samsung Galaxy Tab International (GT-P1000) with Android 2.2.1 or 2.3
Samsung Galaxy S II (AT&T) with Android 2.3
To use Cisco Jabber for Android on the Samsung Galaxy S device, it is important that you upgrade your handset OS to Android Version 2.2.1 or 2.3. See the manufacturer/carrier site for more information about how to update the OS on your device. Minor voice quality issues may be experienced depending on the device used.
So hopefully Cisco is still working on the Cisco Jabber solution, and a lot of mobile Android phones will be supported so the road to success will be open.
Hopefully someone can help me to list of tested and supported phones (Official bij Cisco)
Kind regards,
Edgar

The official list of tested Android phones is what you've already discovered. With the next release of Cisco Jabber for Android, I'm sure it will be updated.
While the official list of what we tested is short, the client will work on many Android devices and TAC will provide support if you run into technical issues; provided the issue is with the Cisco Jabber client itself, and not with the OS of the manufacturer.
If there is a specific Android phone you are looking to have officially tested by Cisco, PM me with that information and I'll work with you to see what we can do to get it added.

Server Requirements for Launching J2EE Application on web

Hi,
I am new to web technologies, I apologize if I am asking a very basic question. I have a developed a J2EE Web Application for Online Assessment. I use Tomcat as server and MySQL database. I am expecting around 1000 users to simultaneously undergo our assessment. The assessment is a computerized adaptive assessment. For running the statistical calculation, I am keeping some information in the User Session, which will be around 10 Kilobytes per user.
I was trying to understand what would be the minimum system requirements (on processing speed and ram) for supporting this application.
Is storing more information of Session could be a bottle neck for me in supporting maximum concurrent users?
Anticipating your help.
Thanks
De Paul

You should just be able to put the SWF and wrapper HTML file
on the server, and it just "serves" the swf and wrapper file. I
don't think there is anything else you need, unless you are using
LifeCycle DS.

WEB Server And Database Space requirements for deploying Web Application

Hi,
We are in requirement of WEB Server And Database Space requirements for deploying our Web Application in cloud server. We want to know technical requirements and feasibilities laid by Microsoft team for deploying web
application.......
Regards,
Sreenivasa M S

Hi,
Please refer this link and check if it helps:
http://blogs.technet.com/b/cbernier/archive/2013/09/24/deploy-your-web-application-to-windows-azure-from-with-visual-studio.aspx
Regards,
Azam Khan

System requirements for stand-alone application

Hi all
Could you tell me system requirements for stand alone app, which requires run time engine and variable engine to work.

Are you wondering about the space requirements? This of course will depend on the application. You can get an idea for this by creating an installer which includes the run-time engine and the variable engine, and then perhaps installing it locally.
Best Regards,
JLS
Best,
JLS
Sixclear

Third Party CA certificate requirement for Cisco expressway C and E

Hi All,
We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate, who are using Third Party CA certificate for MRA solution.

First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
Go to Maintenance > Security certificates > Server certificate
NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
This is what the CSR page looks like

Android tablets supported for Cisco Jabber for Android 10.5 ?

Exist a list with tablets support for this realease ?
In release notes only include smartphones.
Anoher question, is about version android client, in google play exits a old version, but not 10.5, any reason for this ?
Thanks in advance.

The tab listed for support is " Google Nexus 10 (Android OS 4.4.x) ". Please refer to the following link for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_011.html#CJAB_RF_D3CF90B1_00
Quoting the following link; https://play.google.com/store/apps/details?id=com.cisco.im&hl=en ;we have got the J4A 10.5 listed on the playstore.
- please rate if this helps.

Hardware requirement for cisco Prime NCS 1.1

Hi,
Am not sure if the datastore for NCS1.1 soft appliance has to be thick provisioned or thin provisioned? the installation guide say pick thick provision. not clear if this is a must. for exaple in case of Cisco Secure ACS5.3 it clearly states it has to be thick provisioned. where can i find a documnetation for NCS1.1 clearly stating the requirement. without this, hard to convice the storage team.
thanks,
Kerim

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba943.shtml#req
hope this helps

Minimum Router's RAM requirement for Cisco CME

Hi,
Does anyone ever try to use below 1 GB RAM when installing CME for router 29XX? I know that Cisco recommend to use 1 GB RAM. I just want to know, what problem we will may face, if we implement CME with 2921 router for 50 users with default RAM (512 MB).

Hello,
As you mentioned; for 2911 routers the recommended is to use 1 GB of RAM as per the link below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme105spc.html
As you also going to deploy it with its maximum ip phones that can support, I'd highly recommend you to use 1 GB. If you use 512 RAM, you may fall into performance issues and your setup will not be supported by Cisco TAC.
Thank you,
Shadi

Requirements for Cisco Jabber Applications

Similar Messages

Maybe you are looking for