Requirements for few periods not shown in MD04

PIRs for a materials are not flowing to MD04 list for 04 and 05 periods, it is not showing any PIRs in MD04 though we create requirements in MD62 for these periods, but from 06 onwards it is showing PIRs properly.Can you Please let me know where should we check to get the cause for this error?

Veesh,
Are the Versions for the period 04 & 05 same as Period 06. Please not only active Version of the PIR would be displayed in MD04.
Regards,
Prasobh

Similar Messages

Material is not shown in MD04.

Hi Friends,
We have created a Sales order for some materials. All the materials are subjected to MRP. In mateial master We maintian all Except MRP group. Also we maintain the Requirement type etc with respect to the Mateial Type in configuration. In our case when we created the Sales order some of material are picking the requirement and same was shown in MD04 also in availbility check we can able to check the reqirement but some of the msaterials no requirement generated in availibility and not shown in MD04. All the materails are belongs to material Type FERT. Let me know some materials are not Picking the requirement and not shown in MD04.
When we maintain the MRP Group the materials were picking the requirement in availbility and alos shown in MD04.
Will anone explain the difference between the both setup like Picking requirement with respect to Material Type and Picking Requirement with respective to MRP group etc. aslo when and where we can user those things
Regards
Palani

Requirements of sales orders are transferred to MD04 based on the item category.
In SPRO/IMG:
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Determination of Requirement Types Using Transaction
In here, you set a requirement type for each item category. Without a setting here, the requirements do not display in MD04.
Hope this helps.
Gina

AUTOMATIC CLEARING FOR RECEIPTS실행시 PERIOD NOT OPEN ERROR

제품 : FIN_AR
작성날짜 : 2004-05-19
AUTOMATIC CLEARING FOR RECEIPTS실행시 PERIOD NOT OPEN ERROR
========================================================
Problem Description
AR에서 Receipt이 "Remitted" 상태임에도
"Automatic Clearing for Receipts"프로그램 실행시 아래와 같은
Error가 발생하면서 처리되지 않음
ARZACS module: Automatic Clearing for Receipts
MSG MSG-01000: DEBUG: Before_Report_Procs.Check_GL_Date.
MSG MSG-05000: DEBUG: GL_Date not within open period.
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-00000: normal, successful completion
Solution Description
Period가 open되어 있지 않아 발생하는 것으로,아래의 실제 Test과정을
참조.
Automatic Clearing Test step.
1. Trx 입력
GL_DATE 09-JAN-2004
2. Receipt입력
GL_DATE 09-JAN-2004
Maturity DATE 15-JAN-2004
(Payment Method는 Clearance Method가 "by Automatic Clearing"을 가진
Receipt Class를 입력)
3. Remittance 실행
Receipts -> Remittances 에서 Auto Create
4. Clearing실행
Receipts -> Clear/Risk Eliminate에서
"Automatic Clearing for Receipts" 실행
Parameter중 Clear Date 11-JAN-2004로 입력
5. 해당 Receipt이 Clearing안됨.
6. 다시 Clearing실행
"Automatic Clearing for Receipts" 실행시
Parameter중 Clear Date 16-JAN-2004로 입력
7. 해당 Receipt이 Clearing됨.
위의 Test결과에서 알 수 있듯이,
Clear Date는 Maturity Date보다 이후여야 함을 알 수 있다.
또한, Maturity Date가 같은 Period내가 아닌 그 다음 Period, 예를들어 2월15일이라고
해도 Clear Date를 2월 15일 이후로 입력해야만 해당 Receipt이 Clearing되었다.

hi,
pl go to OB52 and open the FI posting period for account type S.
you will find either 1000 or 0001 as the field status variant for which you can select the acccoutn type S. You need to know what is the field status variant for your comp code. You find out by going to OBY6 ( Comp code global settings ).
at OB52 you can maintain this way.
1000 S zzzzzzzzz 1 2008 12 2008 13 2008 16 2008.
regards
sadhu kishore

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

HELP!! iPhone won't work! Software required for iPhone is not installed.

Hey, I have a pretty big problem. I just got the iphone yesterday, and tried all night hooking it up, but no luck. I installed the latest iTunes, but everytime I plug in my iphone, i says it doesn't have the software required to install iPhone. Please uninstall iTunes using setup, then re-install.
Well I do that, 4 times in fact, but same error every time. iTunes works, everything installs, but iPhone just won't activate. Windows sees iPhone and pulls up the auto-play dialog, but iTunes says to keep re-installing.
I called tech support, but was on hold for 2 hours, then just hung up.
If someone could help me out, that would help a LOT
I'm running Vista, 64bit.
ps: Windows says installing driver in the bottom right, and says the driver installs successfully every time. I uninstall the driver manually too, but no luck
"The software required for iPhone is not installed. Please run the iTunes installer to remove iTunes, then install iTunes again."

The same thing happened to me when i first plug in my iphone. it said that in order to use the iphone u needed the WINDOWS XP SERVICE PACK 2 or later installments. you can down load that from windows.com if you already have windows for you computer. then i tried it again and said that i had to uninstall itunes and reinstall it back on to my computer. i did that also. im not sure how u did it but did u completly take it off your computer? because thats how i did it, i took it completly off, and went back to apple.com and downloaded it again. i dont know if this was any help to u.

The software required for iPhone is not installed. Run the iTunes installer

I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
Please HELP!
Thanks.

jaffy,
iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
http://docs.info.apple.com/article.html?artnum=301301
To quote the article:
"iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
Nathan C.

Periodic lot size PR not covering the requirement for the periods

Dear Experts,
I am using customized monthly lot size size key with Periodic lot size procedure and number of periods 3 months.
The MRP is creating one purchase requisitions for all the requirements for the first month only. The second and third month requirements are not included for the purchase requisition quantity. The second and third month requirements are kept opened without any PR.
The planning harizon is 100 days which is more than 3 months. There is no maximum lot size restrictions. But still why the purchase requisition quantity is not included the second and third month requirements.
Please give your valuable suggestions.
thanks and regards
Muru

Dear Experts,
I am using customized monthly lot size size key with Periodic lot size procedure and number of periods 3 months.
The MRP is creating one purchase requisitions for all the requirements for the first month only. The second and third month requirements are not included for the purchase requisition quantity. The second and third month requirements are kept opened without any PR.
The planning harizon is 100 days which is more than 3 months. There is no maximum lot size restrictions. But still why the purchase requisition quantity is not included the second and third month requirements.
Please give your valuable suggestions.
thanks and regards
Muru

Delivery not shown in MD04

Hello,
I have created STO with UB document type and created a dely in supplying plant.
STO is displayed in MD04 in both the plants before delivery.After delivery is done it is not displayed in supplying plant but STO PO is displayed in receiving plant.
Actually delivery to be displayed in supplying plant untill PGI is done but some how it is not displayed for few items.
Helpful answers will be rewarded.
regards
suresh

Hi,
Sure, that is why it is worth checking it is correct.
A selection rule consists of certain MRP elements and stocks that are grouped together to a rule. Only the MRP elements that are selected in the selection rule are displayed, of the MRP elements that are displayed, only those flagged as relevant to availability in the selection rule are used to calculate the quantity available and the ranges of coverage. Only the stocks defined in the selection rule are used to calculate unrestricted-use stock, etc
The display filter controls the display of the MRP list and the stock/requirements list. The system displays MRP elements only in the time period defined in the display filter. Within this period, the system displays MRP elements only for the segments selected in the display filterm so check your filter setting, deliveries could be excluded. This reduces the data in the list to a clear selection.
Also, check that define MRP views has not been populated, this could affect user views.
Thanks.

LP type delivery not shown on MD04

Why LP type delivery document is not visible on MD04 screen? and can we make it visible?

Hi,
Sure, that is why it is worth checking it is correct.
A selection rule consists of certain MRP elements and stocks that are grouped together to a rule. Only the MRP elements that are selected in the selection rule are displayed, of the MRP elements that are displayed, only those flagged as relevant to availability in the selection rule are used to calculate the quantity available and the ranges of coverage. Only the stocks defined in the selection rule are used to calculate unrestricted-use stock, etc
The display filter controls the display of the MRP list and the stock/requirements list. The system displays MRP elements only in the time period defined in the display filter. Within this period, the system displays MRP elements only for the segments selected in the display filterm so check your filter setting, deliveries could be excluded. This reduces the data in the list to a clear selection.
Also, check that define MRP views has not been populated, this could affect user views.
Thanks.

Sales order not shown in MD04 and product view

Hi All,
Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
Regards,
Prabhu

Hi,
In the sales order, please check the item category in the schedule lines.
If the item category is CN, then you cannot see the requirements in MD04.
The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category in the sales order became CN.
Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
Regards,

Business area required for few invoices

Hi friends i have one issue which is as per requirement i selected business area is optional but for few invoices it is mandatory and for few invoices it not required, then i done validation it is asking business area for all invoices can i apply substution what is the procedure how it helps me
please answer i will assign points
Thanks and Regards
chennu

> Hi friends i have one issue which is as per
> requirement i selected business area is optional but
> for few invoices it is mandatory and for few invoices
> it not required, then i done validation it is asking
> business area for all invoices can i apply substution
> what is the procedure how it helps me
> please answer i will assign points
>
> Thanks and Regards
> chennu
In validation provide the conditions under which it should look for BA and conditions underwhich it should not. Substitution will not help you in resolving this to my understanding.

J/v passed for TDS which not shown TDS Report

Sir,,
I faced problem regarding some TDS Like Interest,Salary, entry passed through which not shown in
Tds report.
I not aware about how to passed this type entry so which appeared in TDS report.
Pls give me a suggestion regarding above problem.

Hi,
Create one time vendor or dummy vendor for all expenses. Then assign w/h tax codes and post the TDS at the time of invoice or payment.
You will not get report if you directly pass a JV.
Regards,
Shaik

Stock for 0STOCKTYPE value # not shown

Hi experts,
I've got a little problem with showing stock with dimension stocktype.
I've created a query with the free dimension stocktype. When adding this to the rows all stocktypes but the empty ('#') are shown. The total shows the value including '#' data:
                                        Stock (Value)
     Plant      Stock Type                          EUR
     1101     Frei verwendbar               -25.190.984,26
             Gesperrt                 7.423.054,97
             Kundenkonsi frei ver          -181.952,48
             Transit                    34.243.952,30
     Total                                 23.680.941,04
Does anybody has an idea why # ist not shown?
Kindest,
Ralf

Hi,
Enable the Key and Text type for stock type and check if you get any values. Doesn't seem like you have given any restriction otherwise total will not addup.
Still you can check if you have put any global filter or any specific filter to Stock type if it is RKF?
Regards,
Durgesh.

"an external subroutine required for execution can not be found."

My application Intermittantly displays "an external subroutine required for execution not be found." The exe file is located on a local server. The missing file is a call to hostname.dll . If I run the exe file on the local machine the error message is not diplayed.
Why?

It sounds like an intermittent problem with the connection to your local server. It also sounds like there's a lot of traffic on the network every now and then, which is most often true on most networks.
Are you calling this external subroutine as fast as you can? If you are, try slowing it down. Adding some delays might take the problem away.
The second suggestion is to not be dependent on network files. If you do, add some sort of error checking capabilities to your program so that it will know to try again if the file cannot be loaded fast enough.
Must the .dll be located on the server? If you're planning on running your application fast, you definitely want to keep everything on the local machine.
Just my suggestions. Hope that helps.
Shan Pin Koh

How to lock the data for few periods in the Input Layout

Dear All,
I have an input enabled layout wherein I will display the data based on a period range.( For ex, 01.2007 to 12.2007).
Now, based on the current period I should disable the input readiness for the periods less than my current period.
In my ex, if my current period is 06.2007, the input readiness should be disabled for the periods 01.2007 to 05.2007 .
How can I achive this?
Regards,
Srini.

Hi Srinivas.
You can use user variable exit for the disabled one (the period one); based on the current period..
You can read regarding it in here:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
Hopefully it can help you a lot.
Regards,
Niel
thanks for the points you choose to assign.

Requirements for few periods not shown in MD04

Similar Messages

Maybe you are looking for