Requirements for HTML to get converted into masterpage by Design Manager
Hi All, I am new SharePoint Developer. I am not designer, doesn't know much about CSS. I am getting HTML from outside. We have prepared the Wireframe in Visio as how the top and bottom should look like. My question is - Is there anything that I need to give
to the Designer who doesn't know SharePoint? Is there any guidelines to prepare the HTML? Should I need to give them SharePoint CSS Chart or something that I should give it to designer? or It would be just plan basic HTML and CSS and Design Manager would convert
itself?
Please advise.
Regards,
Khushi
Khushi
If your designer has not used SharePoint before then the only thing you need to tell him/her is to take care of the html/xml validation. HTML should be W3C compliant. He can use any online tool to validate his HTML. There is a tool available on W3C.org (??)
as well. All tags should have ending tags. Once you have the validated HTML, SharePoint will take care of the rest. Design manager will convert your default html file into a master page. Remaining html pages will have to be converted into SharePoint pages
manually (Create pages in the Pages library). Ask your designer to layout the site using three sections: Header, Content and Footer. It will make your life much easier if you had these three sections in the master page. Then all you will need to do is
add content in the Content area of each of the remaining site page.
Btw, I have written a complete chapter on this topic in my new book on SharePoint (See my signature below for link). It is available in Kindle edition also if you want to get an immediate access to it.
Saifullah Shafiq
Blog:
Twitter: LinkedIn:
Facebook:
Google+:
Latest Book:
A Practical Guide to SharePoint 2013
Similar Messages
-
Excise invoice not getting converted into INR from USD for an IMPORT PO
Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20 USD
Custome - 204.20 USD
CVD - 179.54 USD
Cess on CVD 3.59 USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED - 179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .-- MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight - MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta -
Blank field getting converted into wrong date
Dear All,
I have one date field in SAP table in which there are some entries and some blank entries.
when Proxy is sending this data from ECC blank entries are converted into 00000000 and through XI in file
this
00000000 entry for date getting converted into wrong date like 30.11.0002 in file.
I have taken data type as string do I need to take data type as date.
My doubt is if there is no entry in table why it is convertng to 00000000 and after passing from XI why it is converting into
30.11.0002 .
RegardsHi ,
My date format like this
source --yyyyMMDD
target-DD.MM.YYYY
so if
source is
00000000
should comes like this
target
00.00.0000
but it is converting into
30.11.0002
every where in file values for 00000000 is coming like 30.11.0002
Regards -
How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"
I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig -
Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindianMy chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian -
Problem with special characters getting converted into '#' in portal
Hi All,
The special characters like " - ", " ' ", " ` ", are getting converted into '#' when the smartform is displayed in portal.
I have a smart form in which the text contains the above special characters and they are getting displayed as ' # ', when the form is invoked in portal. We are not able to trace the problem.
I need your input on this ASAP.
Thanks in Advance,
SowmyaThis could be caused by conversion routine on the field.
in sapscript, can use &FIELD-NAME(K)& to ignore conversion routine
To see this and other options, in text edit of script select menu option Insert>Symbols>New and then type field name and select desired check box options - field will be placed in script with relevant formatting characters
Andrew -
Why do image links in my HTML signature get turned into inline images?
I have written a program to create HTML signature files for email programs at my workplace.
The signature file uses URLs to images hosted on a server. This appears to work fine, but I've noticed that when I send an email from Icedove (Thunderbird rebadged for Debian), the image links automatically get turned into attachments. These are then visible as base64-encoded MIME blocks in the email source.
I cannot find any option for altering this behaviour anywhere in the application, even in the Config Editor.
Can anybody advise me how to change this behaviour? Thanks in advance.
I am running Icedove v.17 for Debian 64 bit.By default Thunderbird attaches all images, even if the <img> element points to a remote resource. Most e-mail clients block remote content these days unless the user authorizes it (see [https://support.mozilla.org/en-US/questions/991448 this thread] for an in-depth discussion) due to potential privacy/tracking issues. Thus, the image your are adding as a remote resource may not display the first time the recipient opens the message.
If you want to change your code respectively anyway, have a look at [http://kb.mozillazine.org/Creating_complex_mails_with_inline_images#Remote_images this article]. You'll have to add an attribute <img '''moz-do-not-send="true"'''> to the element which will Tell Thunderbird to ''not'' download the image from the server and embedding it into the message on sending. -
"GWCommanderClass can't get converted into GWCommanderClass"
I'm using a mix of C3PO & GW Token API. My language is C# and the Program is made for archiving into different archive storage systems.
Here my Error Message in German: 'Das Objekt des Typs "GroupWiseCommander.GWCommanderClass" kann nicht in Typ "GroupWiseCommander.GWCommanderClass" umgewandelt werden.'
Translated: 'The object of the type "GroupWiseCommander.GWCommanderClass" can't be converted into "GroupWiseCommander.GWCommanderClass".'
I got a C3PO which is using token API (GWCommander) to:
a) save the mail in mime format on the harddrive (ItemSaveMessage)
b) get the current logged in username (EnvUserID(1;0);)
My Program is first calling the ItemSaveMessage GW token from within the C3PO. Afterwards, it loads a archive dll which will do something with the eml file on the archive storage. The loaded dll is using another gwcommanderclass object to execute the EnvUserID token.
So, I got 1 commander object in my c3po dll and one commander object in a seperate dll which we replace, depending on the connected systems.
I heard, that it's recommended to free the gw commander object as soon as possible. So I set the gwcommander object to "null", directly after using it. But I still receive this weird error.
This behaviour is not 100% reproduceable.
One time it works fine with 10 tries and no error during the archiving process.
Sometimes I get this error after I archived the first item.
Thanks in advance for any kind of help/hint, regarding this issue.Problem solved: I just moved the Commander Object code from the C3PO Dll into the second DLL.
-
How to avoid links/paths get converted into tokens in teststand report
Hi,
I was trying to get The hyperlink for some of The files in The teststand(4.0) report for a particular custom step made in labview 8.5. I was able to get The link correctly when The path specified does not contain any tokens(\N, \T,\R,\n,\t,\r,etc).
For example if my Folder name is "New" inside which my file is present(C:\NEW\test.txt). The teststand automatically converts "\N" and "\t" in The path to tokens.
I am not able to resolve this.
Can anyone help me in this regard.
Thanks,
Praveen
Solved!
Go to Solution.I got the soultion for my query, working on it for an hour.
Solution:
If the path for the text file which was linked in report was :C:\Testing\New Folder\REPORT\test.txt
and if the report file is parallel to the test.txt file: C:\Testing\New Folder\REPORT\test.xml.
then for the link for absolute path in report : C:/Testing/New Folder/REPORT/test.txt
link for the relative path in report : "test.txt"
If the path for the text file which was linked in report was :C:\Testing\New Folder\REPORT\files\test.txt
and if the report file is parallel to the test.txt file: C:\Testing\New Folder\REPORT\test.xml.
then for the link for absolute path in report : C:/Testing/New Folder/REPORT/files/test.txt
link for the relative path in report : "../test.txt"
This is working for me, hope this works in every case.
Praveen. -
Number range error for some materials when converting into Production order
Hi,
Please I need some help with my error.
When trying to convert planned orders into production orders, I receive an error message saying Internal assignment not defined for number range XX.
The strange part is that is only happening for two materials! Material type is the same one we always use.
The planned orders have also the same type.
Any idea?
Thanks,Hi,
I think for these 2 materials system is selecting the order type for which external number range is marked and ingternal number range is switched off.
Can you go to CO01 and create a production order for these materials directly w/o assigning order type on intial screen. check which order type is detrmined by system and check its number range in co86.
please check. -
MRP Generated PR should not be converted into PO before release date.
Gurus,
In MRP generated PR system defines a release date for the PR(date by which the PR should get converted into PO).My requirement is system sholud not allow me to convert that PR into PO before that Release date.
MRP generated PR are not subjected to Release strategy.
Is their any Configuration,User Exit for it.
SNHello Sanjay,
please try setting up an error from OMCQ t-code.
If this not helps then please contact your abaper, I m sure he will find out a way out of this.
Hope this helps..
Robin -
Cyrllic characters getting converted to special characters.
I am facing a problem when cyrillic character is being sent from JSP to servlet ,its getting converted into some other special character.I am using request.setCharacterEncoding("UTF-8") on servlet.And on jsp I am using <%@page pageEncoding="UTF-8" contentType="text/html; charset=UTF-8"%>.I am facing this problem both in JBoss and Websphere application server.
Please help me in solving this problem.How do you send the characters - using POST?
I have tried both ie get and post.....
Can you post the code in your servlet that you use to retrieve and display the Cyrillic characters in question?
Just using request.getParameter() to get the value...It is showing question marks ie ??????
And finally, can you post an example of a Cyrillic string and the corresponding incorrect string you see in the servlet?
Can post cyrllic characters here...:-) But I am giving normal characters only...
It started working in websphere when I changed the jvm settiings ie I gave encoding scheme to jvm also.But still it is not working for JBoss4.0.2.
Any help will be highly appreciated. -
WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView
Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
BertUse System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers -
ALV QUANTITY field Geting converted into decimals ?
Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
SreeramHi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
ebeln TYPE ebeln,
ebelp TYPE ebelp,
ktmng TYPE ktmng,
menge TYPE bstmg,
END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " ADD_FIELDCAT
Regards,
Jovito -
How to install Apache Server on Linux 10G for HTML DB 1.6
Hello,
i have Oracle 10g installed under Suse Linux. Apache needed to be installed too in the oracle home but isn't.
it's required for HTML 1.6 DB install.
i did not found it with the normal installation image, how to install Apache for Oracle? for 10G?
Regards
CarlThe Apache is on the Companion CD
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/linuxsoft.html
Also HTMLDB 1.5, so Install only the Application Server and add the HTMLDB 1.6 from separate Download
Maybe you are looking for
-
How to stop my pages from freezing on Firefox?
I noticed I've been having a lot of crashes and my pages keep freezing when I use Firefox. This started with the recent Firefox updates...I have version 3.6.7 right now. Sometimes a message pops up about some problem with plugin...I've also recently
-
2006 imac wont boot ! g5 cord ok to try?
My late 2006 imac wont power up after a power outage. I did have it plugged into a surge protector tho that is over a decade old by now, didnt think of that earlier. I just get a black screen, no change when i press the power button after it being
-
Maintaining active links and objects when converting Word to PDF
I'm using Acrobat X Standard and am trying to convert a Word 2010 file to .pdf. The Word document has an embedded Word file within it (Insert > Object > Display As Icon), but when I convert the Word file that embedded object is not active - it's mor
-
Setting default layer visibility in Acrobat 9 Standard
I just installed Acrobat 9 Standard after getting a Win7 x64 computer. My old computer had Acrobat 7.5 Pro. One of the features I need is the ability to change the default visibility of layers created by a PDF export from another program. When I v
-
Flv encoding software in flex and AIR
Hi, I want to create an FLV encoding software which takes various video files and encode them into flv format. Is there any actionscript library or flv sdk for this? I saw the flash media server but it is for online apps. I want to create an AIR app