Requirements for phantoms to not pass down to components

I have this requirement where the requirements at the phantom level should not be passed down to the components but the Planned orders at the phantom level need to be created.
Is this even possible? If so then what planning strategy needs to be used and what type of independent requiremnets should be used. Please advise.

You can use any stg like 11, 10, 40 to phantom assembly, but see that following setting is done in MRP4 view of product material master
MRP dep. requirement = 1- Materials for dependent requirements are not planned.
<b>Explanation</b>
<u>MRP relevancy for dependent requirements</u>
This indicator controls whether dependent requirements are relevant to MRP or not. Dependent requirements include dependent reservations and stock transfer requirements.
You only use this indicator in connection with planning strategies for make-to-stock production, assembly planning. Note that the indicator Dependent requirements not relevant to MRP should only be used when, for example, planned independent requirements exist for an assembly. In this case, no receipt elements for the dependent requirements in MRP should be created as receipts have already been created for the planned independent requirements.

Similar Messages

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

HELP!! iPhone won't work! Software required for iPhone is not installed.

Hey, I have a pretty big problem. I just got the iphone yesterday, and tried all night hooking it up, but no luck. I installed the latest iTunes, but everytime I plug in my iphone, i says it doesn't have the software required to install iPhone. Please uninstall iTunes using setup, then re-install.
Well I do that, 4 times in fact, but same error every time. iTunes works, everything installs, but iPhone just won't activate. Windows sees iPhone and pulls up the auto-play dialog, but iTunes says to keep re-installing.
I called tech support, but was on hold for 2 hours, then just hung up.
If someone could help me out, that would help a LOT
I'm running Vista, 64bit.
ps: Windows says installing driver in the bottom right, and says the driver installs successfully every time. I uninstall the driver manually too, but no luck
"The software required for iPhone is not installed. Please run the iTunes installer to remove iTunes, then install iTunes again."

The same thing happened to me when i first plug in my iphone. it said that in order to use the iphone u needed the WINDOWS XP SERVICE PACK 2 or later installments. you can down load that from windows.com if you already have windows for you computer. then i tried it again and said that i had to uninstall itunes and reinstall it back on to my computer. i did that also. im not sure how u did it but did u completly take it off your computer? because thats how i did it, i took it completly off, and went back to apple.com and downloaded it again. i dont know if this was any help to u.

The software required for iPhone is not installed. Run the iTunes installer

I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
Please HELP!
Thanks.

jaffy,
iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
http://docs.info.apple.com/article.html?artnum=301301
To quote the article:
"iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
Nathan C.

"an external subroutine required for execution can not be found."

My application Intermittantly displays "an external subroutine required for execution not be found." The exe file is located on a local server. The missing file is a call to hostname.dll . If I run the exe file on the local machine the error message is not diplayed.
Why?

It sounds like an intermittent problem with the connection to your local server. It also sounds like there's a lot of traffic on the network every now and then, which is most often true on most networks.
Are you calling this external subroutine as fast as you can? If you are, try slowing it down. Adding some delays might take the problem away.
The second suggestion is to not be dependent on network files. If you do, add some sort of error checking capabilities to your program so that it will know to try again if the file cannot be loaded fast enough.
Must the .dll be located on the server? If you're planning on running your application fast, you definitely want to keep everything on the local machine.
Just my suggestions. Hope that helps.
Shan Pin Koh

Account field required for some users, not for others in URM when checking

I am running into a real show stopper. I have been working in our development database, and have tested checking in content multiple times with no problems. I recently turned it over to my users to begin testing and they can not even check in one document, because they receive an error stating that the account is required. I know just enough to be dangerous, so I am not quite sure how to solve this one. It makes no sense to me that on my check in screen, account is not required and yet on all of my users check in screens, not only is it required, but nothing they enter is accepted as a valid value, so they can't even get past it. I would just as soon not have account show up or be required, but have struggled with making that happen, since it is not a custom metadata field. It appears to be a delivered field used for security purposes? any help would be appreciated! Thanks.
One more thing that I noticed that may be helpful in diagnosing this is that my profile has no accounts, just #none,#all
whereas the user's profiles have a number of different accounts listed in their profile. Could this be part of the reason that they are forced to enter an account when checking in content and I am not?
If so, how can I get around this?
Edited by: user10985708 on Apr 7, 2009 12:21 PM

That´s a little strange behaviour becouse normally the account field is not required as default.
You could try a global rule setting the Account field not to be required with some IDOC.
But as you say you´re not using accounts anyway i´d suggest removing it from your server instance.
In the server\config\CONFIG.CFG file look for UseAccounts=true set it to false and the field won´t bother you anymore.

Requirements for few periods not shown in MD04

PIRs for a materials are not flowing to MD04 list for 04 and 05 periods, it is not showing any PIRs in MD04 though we create requirements in MD62 for these periods, but from 06 onwards it is showing PIRs properly.Can you Please let me know where should we check to get the cause for this error?

Veesh,
Are the Versions for the period 04 & 05 same as Period 06. Please not only active Version of the PIR would be displayed in MD04.
Regards,
Prasobh

Username and Password Required for Wifi Connection, Not Being Asked for Username

I just updated my iphone 4s to ios 8 and attempted to join my school's wireless network, which requires both a username and a password. i am being asked for a password but not a username.
my question here is how to have the username be requested as well.
thank you in advance for answering.

Hi, did you ever find a solution to this? I see your post is old, but the exact same thing has happened to me and I can't figure out what the generic username and password would be. Any insight you have would be most helpful. Thanks!

** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?

Hi Friends,
All we know that since IDoc, XI adapters running on Integration Engine (SAP WAS 6.40), Sender Agreement is need not required.
Since RFC is proprietary document for SAP like IDoc, why we are creating Sender Agreement for RFC adpater ? (We know that RFC adpater is running on Adapter Engine, so that ...). Some of our guys asking me this question.
Why is this difference (IDoc adapter running on Integration Engine & RFC adapter is running on Adapter Engine) ? Anyboday can clarify the exact reason on this ...
Kind regards,
Jegathees P.

Hi,
RFC Adapter:
RFC adapter can abe to manage metadata while using the Jco call.This turns the RFC data to RFC xml message.
IDOC Adapter:
But Loading the metadata for IDOC we should create a port and rfc destination.IDOC adapter and metadata container placed in integration server before and after the pipeline step.metadata container converts the IDOC to IDOCxml.IDOC adapter converts the IDOC xml to native xml format.Using idx2 we uploaded the IDOC metadata with the help of RFC destination and port.
Regards,
Prakasu.M

ECM - History Requirement for BOM status not activated

Hello,
He have an issue with the warning message displayed when we are trying to modificate an BOM (transaction CS02).
In OS25 transaction we defined that only BOMs with "usage = 1" and "status = 3" have history requirement.
The parameters of OS27 transaction are OK too.
The problem is that the warning message 045 is displayed when we execute CS02 for every kind of BOM usage and status.
We must substitute the warning message by an error message. To do that, we must disable the field NOHIS in C_STUE_NOH object, in the user profile. But, when we do that, the error message is displayed to all kind of BOMs status, blocking the process (following the warning message, which is displayed to all kind of BOM status)
This is an issue of SAP_APPL 470 system.
We tested the similar procedure in an SAP_APPL 603 system, and the results were OK, in other words, the warning message is only displayed for the BOM usage and BOM status defined in OS25 transaction.
Thank's in advance

When the BOM with usage 1 and status 3, by example, is changed with a modification number (following OS25 parameters), the field STZU-HISTK is activated.
Then, if the status of the BOM is changed to 2, the modification number is required, because the STZU-HISTK is activated.
In OS25 transaction only the BOm usage = 1 and BOM status = 3 has the history requirement flag, but after the modification with the mod. number, all the status of the BOM now has the modification number requirement.
How can I allow the modification of the BOM without modification number (other status not flagged in OS25), if this BOM hal already been changed with an modification number (by the status flagged in OS25)?
Thank's in advance

Korean Language Support Package required for Reader but not Acrobat?

One of our departments on campus has created a form that is causing some users to get a message prompting them to download the Korean Language Support Package in order to fill in the form fields.
When I originally tested this in Acrobat Pro 9 I didn't get any errors. Another user also reported the issue recently (two this week). So we tested it again, but this time used both Reader 9 and Reader X -- both programs were generating this message to download the language pack. The form appears to be completely in English with no Korean characters. It uses fairly standard fonts and I didn't see any embedding or encoding issues with the fonts.
Aside from having end users download a Korean Language Support Pack to view a PDF that doesn't seem to contain any Korean, are there any other options out there without recreating the form from scratch? Here is a list of the fonts used in the PDF. The only types of encoding are Ansi and Identity-H (which I expanded in the SS above), with the latter fonts being embedded within the PDF.
Any ideas? The form is linked below. Thanks in advance for your replies.
Here is a link to the PDF

SOLVED
While our problems differ, my solution may still be relevant.
My culprit was a rogue font in an embedded Visio drawing. I identified and located the font using the "List text using non-embedded fonts" Preflight analysis in Acrobat 9.4 Pro. I checked the encoding of each non-embedded font and discovered that Arial Unicode MS used Korean font encoding (specifically, KSCms-UHC-H). See screenshot below. Doubleclicking on one of the font properties highlighted the offending text in the pdf.
I went to that location in the source file, which happened to be in the first embedded Visio drawing (shown above). I double clicked the drawing, selected all, and selected Arial font. Then I regenerated the pdf and viewed it in Reader X. The Korean language pack error message did not appear and all Visio drawings displayed normally.
I would recommend using the Acrobat preflight tools to locate text or objects with incorrect font encoding within your PDF or form, then surgically striking (or carpet bombing) the affected location(s) in the source files with embedded/supported fonts.
Hope this helps.
Message was edited by: mugg326

HR_INFOTYPE_OPERATION updates for a PERNR not passed to it

Hi All,
We have a case where an Internal Employee has left the company and he is rehired as an External. In this case, the same User Id has two different PERNRs. The old PERNR will be in Withdrawn status while the new one will be Acitve.
I am using HR_INFOTYPE_OPERATION to update IT0002 for the new External's PERNR.
Even though I pass only the new PERNR and the External's record to the FM, it updates in IT0002 for both the PERNRs.
Can anyone pls shed some light on why this happens ?
Thanks a lot.
Naila

Intresting ..
i Know i am wrong but check with your FC
So Generally if the same employee is hired into organisation we need to use the same PERNR and make Him Re-hire and Change the department...
So some where you are combining the previous pernr and this pernr ...Just check where ..Mean while if i get information will let you know///Second pernr concept comes with Concurrent employement
Ask your FC how is he generating the SECOND pernr based on old pernr.
Regards
sas

PC logons required when it is not shut down.

My PC is for home use only & I am the only user so security is not a concern. When I let it set idle for a few minutes when I return I have to sign on. How can I eliminate this very irritating condition? I do have it set up so I don't have to logon after being in 'sleep' mode. It only occurs when I leave the screen up and running.
This question was solved.
View Solution.

Hi,
Right click on an empty area of the Desktop and select Personalize. Click the Screen saver link in the bottom right. In the following window remove the tick from the box next to 'On resume, display log-on screen'. Click Apply, then Ok to save the setting change.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

A program required for installation could not be run

I am trying to update itunes, but it rolls back and doesn't complete. This is getting frustrating as to I need it to update my ipod.
Please help me!!

Try manually removing Apple Software Update using the method in this article:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
IF ASU will not uninstall you need to do an installer clean up.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Remove any entries you find for Apple Software Update.
Download the iTunes installer from the Apple site and save it on your desktop. Run the installer from there.
http://www.apple.com/itunes/download/

Software required for iTunes is not installed?

It gives me this error every time I try and hook up my iphone to activate it! Why? I uninstalled and updated to the newest version of iTunes...

flux02,
Are you using Microsoft Windows Vista 64-bit or Microsoft Windows XP 64-bit?
If so this article may have more information for you:
iTunes for Windows not currently supported on any 64-bit editions of Windows
http://docs.info.apple.com/article.html?artnum=301301
-Nathan C.

Requirements for phantoms to not pass down to components

Similar Messages

Maybe you are looking for