Requirements for SCVMM HA
Dear All,
Can someone share an article/blog of all the requirements in building the SCVMM HA. The information is so scattered even on TechNet Articles. Some don't have DB requirements,
some don't have correct Accounts information and some don't have SPN registration information. I would really appreciate if one could list it down or share a link to it. Thanks in advance.
this one should help you: http://www.thomasmaurer.ch/2013/08/how-to-install-a-highly-available-scvmm-management-server/
for the service account, this account should be local administrator on the VMM nodes before running setup.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )
Similar Messages
-
Can anyone confirm if I need to modify the InsertVersionInfo.sql and Permisioins.sql scripts for both the APP-V Management and Reporting databases? KB3031340 only references the Management Database, but I suspect it is required for both.
Thank You!It should only apply to Management Database. There weren't any changes to the Reporting DB AFAIK.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.” -
Table for temporarily stock /requirement for tocde /afs/mdo4
Dear expart,
I developed a zreport for display STO number, Production order number, operation etc.
mainly I use here AFPO,AFRU, MSEG, MCHB & J_3ABDSI Table.
My problem is, when I compare with Tcode /afs/md04 tab-temporarily stock /requirement .
for some MATNR
data show properly.
and some MATNR are blank with message Last MRP run on 04.04.2011 or such date.
Hhow i can filter the in Z-report which MATNR are not in Tcode /afs/md04 tab-temporarily stock /requirement .
my code is.
SELECT j_3abdsiaufnr j_3abdsimatnr j_3abdsij_4krcat j_3abdsimbdat j_3abdsi~menge INTO TABLE it_eket FROM j_3abdsi
FOR ALL ENTRIES IN it_final1
WHERE
j_3abdsi~j_4krcat = it_final1-j_4ksca AND
j_3abdsi~matnr = it_final1-matnr AND
j_3abdsi~werks = it_final1-werks AND
j_3abdsi~bdart = 'TB' AND
j_3abdsi~plart = 'B' AND
j_3abdsi~bsart = 'UB'.
Pls help .
Rayhan
Edited by: Abu Rayhan on Apr 5, 2011 10:24 AMCLEAR i_data1.
REFRESH i_data1.
LOOP AT i_mara.
READ TABLE i_marc WITH KEY matnr = i_mara-matnr BINARY SEARCH .
IF sy-subrc = 0 .
CALL FUNCTION 'J_3AM_DISPOSITION_DISPL'
EXPORTING
i_matnr = i_mara-matnr
i_werks = p_werks
I_DIALOG = ' '
I_SPERR = ' '
I_AUFRUF = ' '
I_BANER = ' '
i_todate = todate
I_HEADER_ONLY = ' '
IMPORTING
ex_dbba = i_data3
E_MDKP =
EX_PBBD =
EX_MELD =
E_CM61M =
EXCEPTIONS
material_gesperrt = 1
wbz_fehler = 2
material_prgr = 3
dispo_gesperrt = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF i_data3[] IS NOT INITIAL.
LOOP AT i_data3 INTO i_data4 .
IF ( i_data4-j_3astat ='A' OR i_data4-j_3astat ='T') AND i_data4-j_3abskz ='C' .
READ TABLE i_t001l WITH KEY lgort = i_data4-lgonr BINARY SEARCH .
IF sy-subrc = 0 .
CLEAR i_data1str.
i_data1str-matnr = i_data4-matnr.
i_data1str-j_3asize = i_data4-j_3asize .
i_data1str-lgort = i_data4-lgonr.
i_data1str-menge = i_data4-menge .
COLLECT i_data1str INTO i_data1.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
Questions
i_mara recordset 500 material
It take more than 3 house to finished this report.
do changed ?
do you help me ?
Think. -
What are the settings required for QM in procurement
Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
ThanksHi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM -
List of Manual Setup required for iSetup to work
Hi All,
This is Mugunthan from iSetup development. Based on my interaction with customers and Oracle functional experts, I had documented list of manual setups that are required for smooth loading of selection sets. I am sharing the same. Please let me know if I anyone had to enter some manual setup while using iSetup.
Understanding iSetup
iSetup is a tool to migrate and report on your configuration data. Various engineering teams from Oracle develop the APIs/Programs, which migrates the data across EBS instances. Hence all your data is validated for all business cases and data consistency is guarantied. It requires good amount of setup functional knowledge and bit of technical knowledge to use this tool.
Prerequisite setup for Instance Mapping to work
· ATG patch set level should be same across all EBS instances.
· Copy DBC files of each other EBS instances participating in migration under $FND_SECURE directory (refer note below for details).
· Edit sqlnet.ora to allow connection between DB instacnes(tcp.invited_nodes=(<source>,<central>))
· Make sure that same user name with iSetup responsibility exists in all EBS instances participating in migration.
Note:- iSetup tool is capable of connecting to multiple EBS instances. To do so, it uses dbc file information available under $FND_SECURE directory. Let us consider three instances A, B & C, where A is central instance, B is source instance and C is target instances. After copying the dbc file on all nodes, $FND_SECURE directory would look like this on each machine.
A => A.dbc, B.dbc, C.dbc
B => A.dbc, B.dbc
C => A.dbc, C.dbc
Prerequisite for registering Interface and creating Custom Selection Set
iSetup super role is mandatory to register and create custom selection set. It is not sufficient if you register API on central/source instance alone. You must register the API on all instances participating in migration/reporting.
Understanding how to access/share extracts across instances
Sharing iSetup artifacts
· Only the exact same user can access extracts, transforms, or reports across different instances.
· The “Download” capability offers a way to share extracts, transforms, and loads.
Implications for Extract/Load Management
· Option 1: Same owner across all instances
· Option 2: Same owner in Dev, Test, UAT, etc – but not Production
o Extract/Load operations in non-Production instances
o Once thoroughly tested and ready to load into Production, download to desktop and upload into Production
· Option 3: Download and upload into each instance
Security Considerations
· iSetup does not use SSH to connect between instances. It uses Concurrent Manager framework to lunch concurrent programs on source and target instances.
· iSetup does not write password to any files or tables.
· It uses JDBC connectivity obtained through standard AOL security layer
Common Incorrect Setups
· Failure to complete/verify all of the steps in “Mapping instances”
· DBC file should be copied again if EBS instance has been refreshed or autoconfig is run.
· Custom interfaces should be registered in all EBS instances. Registering it on Central/Source is not sufficient.
· Standard Concurrent Manager should up for picking up iSetup concurrent requests.
· iSetup financial and SCM modules are supported from 12.0.4 onwards.
· iSetup is not certified on RAC. However, you may still work with iSetup if you could copy the DBC file on all nodes with the same name as it had been registered through Instance Mapping screen.
Installed Languages
iSetup has limitations where it cannot Load or Report if the number and type of installed languages and DB Charset are different between Central, Source and Target instances. If your case is so, there is a workaround. Download the extract zip file to desktop and unzip it. Edit AZ_Prevalidator_1.xml to match your target instance language and DB Charset. Zip it back and upload to iSetup repository. Now, you would be able to load to target instance. You must ensure that this would not corrupt data in DB. This is considered as customization and any data issue coming out this modification is not supported.
Custom Applications
Application data is the prerequisite for the most of the Application Object Library setups such as Menus, Responsibility, and Concurrent programs. iSetup does not migrate Custom Applications as of now. So, if you have created any custom application on source instance, please manually create them on the target instance before moving Application Object Library (AOL) data.
General Foundation Selection Set
Setup objects in General foundation selection set supports filtering i.e. ability to extract specific setups. Since most of the AOL setup data such as Menus, Responsibilities and Request Groups are shipped by Oracle itself, it does not make sense to migrate all of them to target instance since they would be available on target instance. Hence, it is strongly recommended to extract only those setup objects, which are edited/added, by you to target instance. This improves the performance. iSetup uses FNDLOAD (seed data loader) to migrate most of the AOL Setups. The default behavior of FNDLOAD is given below.
Case 1 – Shipped by Oracle (Seed Data)
FNDLOAD checks last_update_date and last_updated_by columns to update a record. If it is shipped by Oracle, the default owner of the record would be Oracle and it would skip these records, which are identical. So, it won’t change last_update_by or last_updated_date columns.
Case 2 – Shipped by Oracle and customized by you
If a record were customized in source instance, then it would update the record based on last_update_date column. If the last_update_date in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Case 3 – Created and maintained by customers
If a record were newly added/edited in source instance by you, then it would update the record based on last_update_date column. If the last_update_date of the record in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Profiles
HR: Business Group => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
HR: Security Profile => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
MO: Operating Unit => Set the Operating Unit name for which you would like to extract data from source instance. After loading Operating Unit onto the target instance, make sure that this profile option is set if required.
Navigation path to do the above setup:
System Administrator -> Profile -> System.
Query for the above profiles and set the values accordingly.
Descriptive & Key Flex Fields
You must compile and freeze the flex field values before extracting using iSetup.
Otherwise, it would result in partial migration of data. Please verify that all the data been extracted by reporting on your extract before loading to ensure data consistency.
You can load the KFF/DFF data to target instance even the structures in both source as well as target instances are different only in the below cases.
Case 1:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1, Loc2, Loc3 (Mandate), Loc4, Loc5 and Loc6
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3, Loc4, then locations will be loaded to target instance without any issue. If you do not provide value for Loc3, then API will fail, as Loc3 is a mandatory field.
Case 2:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1 (Mandate), Loc2
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3 and Loc4 and load data to target instance, API will fail as Loc3 and Loc4 are not there in target instance.
It is always recommended that KFF/DFF structure should be same for both source as well as target instances.
Concurrent Programs and Request Groups
Concurrent program API migrates the program definition(Definition + Parameters + Executable) only. It does not migrate physical executable files under APPL_TOP. Please use custom solution to migrate executable files. Load Concurrent Programs prior to loading Request Groups. Otherwise, associated concurrent program meta-data will not be moved even through the Request Group extract contains associated Concurrent Program definition.
Locations - Geographies
If you have any custom Geographies, iSetup does not have any API to migrate this setup. Enter them manually before loading Locations API.
Currencies Types
iSetup does not have API to migrate Currency types. Enter them manually on target instance after loading Currency API.
GL Fiscal Super user--> setup--> Currencies --> rates -- > types
Associating an Employee details to an User
The extract process does not capture employee details associated with users. So, after loading the employee data successfully on the target instance, you have to configure them again on target instance.
Accounting Setup
Make sure that all Accounting Setups that you wish to migrate are in status “Complete”. In progress or not-completed Accounting Setups would not be migrated successfully.
Note: Currently iSetup does not migrate Sub-Ledger Accounting methods (SLA). Oracle supports some default SLA methods such as Standard Accrual and Standard Cash. You may make use of these two. If you want to use your own SLA method then you need to manually create it on target instances because iSetup does not have API to migrate SLA. If a Primary Ledger associated with Secondary Ledgers using different Chart of Accounts, then mapping rules should be defined in the target instance manually. Mapping rule name should match with XML tag “SlCoaMappingName”. After that you would be able to load Accounting Setup to target instance.
Organization API - Product Foundation Selection Set
All Organizations which are defined in HR module will be extracted by this API. This API will not extract Inventory Organization, Business Group. To migrate Inventory Organization, you have to use Inventory Organization API under Discrete Mfg. and Distribution Selection Set. To extract Business Group, you should use Business Group API.
Inventory Organization API - Discrete Mfg & Distribution Selection Set
Inventory Organization API will extract Inventory Organization information only. You should use Inventory Parameters API to move parameters such as Accounting Information. Inventory Organization API Supports Update which means that you can update existing header level attributes of Inventory Organization on the target instance. Inventory Parameters API does not support update. To update Inventory Parameters, use Inventory Parameters Update API.
We have a known issue where Inventory Organization API migrates non process enabled organization only. If your inventory organization is process enabled, then you can migrate them by a simple workaround. Download the extract zip file to desktop and unzip it. Navigate to Organization XML and edit the XML tag <ProcessEnabledFlag>Y</ProcessEnabledFlag> to <ProcessEnabledFlag>N</ProcessEnabledFlag>. Zip it back the extract and upload to target instance. You can load the extract now. After successful completion of load, you can manually enable the flag through Form UI. We are working on this issue and update you once patch is released to metalink.
Freight Carriers API - Product Foundation Selection Set
Freight Carriers API in Product Foundation selection set requires Inventory Organization and Organization Parameters as prerequisite setup. These two APIs are available under Discrete Mfg. and Distribution Selection Set. Also,Freight Carriers API is available under Discrete Mfg and Distribution Selection Set with name Carriers, Methods, Carrier-ModeServ,Carrier-Org. So, use Discrete Mfg selection set to load Freight Carriers. In next rollup release Freight Carriers API would be removed from Product Foundation Selection Set.
Organization Structure Selection Set
It is highly recommended to set filter and extract and load data related to one Business Group at a time. For example, setup objects such as Locations, Legal Entities,Operating Units,Organizations and Organization Structure Versions support filter by Business Group. So, set the filter for a specific Business Group and then extract and load the data to target instance.
List of mandatory iSetup Fwk patches*
8352532:R12.AZ.A - 1OFF:12.0.6: Ignore invalid Java identifier or Unicode identifier characters from the extracted data
8424285:R12.AZ.A - 1OFF:12.0.6:Framework Support to validate records from details to master during load
7608712:R12.AZ.A - 1OFF:12.0.4:ISETUP DOES NOT MIGRATE SYSTEM PROFILE VALUES
List of mandatory API/functional patches*
8441573:R12.FND.A - 1OFF:12.0.4: FNDLOAD DOWNLOAD COMMAND IS INSERTING EXTRA SPACE AFTER A NEWLINE CHARACTER
7413966:R12.PER.A - MIGRATION ISSUES
8445446:R12.GL.A - Consolidated Patch for iSetup Fixes
7502698:R12.GL.A - Not able to Load Accounting Setup API Data to target instance.
Appendix_
How to read logs
· Logs are very important to diagnose and troubleshoot iSetup issues. Logs contain both functional and technical errors.
· To find the log, navigate to View Detail screens of Extracts/ Transforms/Loads/Standard/Comparison Reports and click on View Log button to view the log.
· Generic Loader (FNDLOAD or Seed data loader) logs are not printed as a part of main log. To view actual log, you have to take the request_id specified in the concurrent log and search for the same in Forms Request Search Window in the instance where the request was launched.
· Functional errors are mainly due to
o Missing prerequisite data – You did not load one more perquisite API before loading the current API. Example, trying to load “Accounting Setup” without loading “Chart of Accounts” would result in this kind of error.
o Business validation failure – Setup is incorrect as per business rule. Example, Start data cannot be greater than end date.
o API does not support Update Records – If the there is a matching record in the target instance and If the API does not support update, then you would get this kind of errors.
o You unselected Update Records while launching load - If the there is a matching record in the target instance and If you do not select Update Records, then you would get this kind of errors.
Example – business validation failure
o VONAME = Branches PLSQL; KEY = BANKNAME = 'AIBC‘
o BRANCHNAME = 'AIBC'
o EXCEPTION = Please provide a unique combination of bank number, bank branch number, and country combination. The 020, 26042, KA combination already exists.
Example – business validation failure
o Tokens: VONAME = Banks PLSQL
o BANKNAME = 'OLD_ROYAL BANK OF MY INDIA'
o EXCEPTION = End date cannot be earlier than the start date
Example – missing prerequisite data.
o VONAME = Operating Unit; KEY = Name = 'CAN OU'
o Group Name = 'Setup Business Group'
o ; EXCEPTION = Message not found. Application: PER, Message Name: HR_ORG_SOB_NOT_FOUND (Set of books not found for ‘Setup Business Group’)
Example – technical or fwk error
o OAException: System Error: Procedure at Step 40
o Cause: The procedure has created an error at Step 40.
o Action: Contact your system administrator quoting the procedure and Step 40.
Example – technical or fwk error
o Number of installed languages on source and target does not match.
Edited by: Mugunthan on Apr 24, 2009 2:45 PM
Edited by: Mugunthan on Apr 29, 2009 10:31 AM
Edited by: Mugunthan on Apr 30, 2009 10:15 AM
Edited by: Mugunthan on Apr 30, 2009 1:22 PM
Edited by: Mugunthan on Apr 30, 2009 1:28 PM
Edited by: Mugunthan on May 13, 2009 1:01 PMMugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish -
Questions on SETSPN syntax and what is required for MANUAL AD auth
I'll preface this by stating that I don't need to do all the extra stuff for Vintela SSO, SSO to database, etc. I just need to know precisely what is necessary to do to get AD authentication working. I managed to get it working in XIr2 previously but it's been so long and I'm not 100% sure that everything I wound up doing was absolutely necessary that I wanted to sort it out for good as we look at going to XI 3.1 SP3.
In the XI 3.1 SP3 admin guide, page 503, the SETSPN command which is
used as part of the setup process to establish a service account to
enable AD authentication is outlined as follows:
SETSPN.exe -A <ServiceClass>/<DomainName> <Serviceaccount>
The guide suggests that the <ServiceClass> can be anything you want to
arbitrarily assign. If I choose something other than the
suggested "BOBJCentralMS" value, is there anywhere else I have to
specify this value to allow the service account to function properly?
The guide suggests that the <DomainName> should be the domain name on
which the service account exists however I've seen many posts online which seem to
indicate this <DomainName> should actually be the FQDN of the server
running the CMS service instead of the general domain name.
Clarification there would be very helpful if anyone has some insight.The CMS account can have an SPN of spaghetti/meatballs, there are no requirements (cept 2 characters on each side of the / I believe). The SPN created should be the value entered in the CMC > Authentication > Windows AD
The account must run the SIA and it therefore must have AD permissions. Now if you are using IIs or client tools you don't even need an SPN. The SPN is for kerberos only which is required for java app servers.
The vintela SSO white paper in the this forums sticky post explains the roles of a service account.
Regards,
Tim -
Is CAL required for SharePoint Foundation 2010?
Is extra CAL required for uploading/downloading docs using SharePoint Foundation 2010? We already have Licensed Windows Server 2008 R2. Ours is an intranet application which will be accessed by 400 intranet users.
If CAL is required then can i use only 1 CAL for my app server to upload/download docs on SP Foundation provided all 400 client requests will go via app server to SP server?If I want to use sharepoint foundation 2013, I need to have Windows server 2008 R2 / 2012 license & SQL server license (optional). I'm confused in - what kind of windows server license is required & do I also need some other license to use sharepoint
foundation?
How can I provide external user access to my sharepoint environment? Is there any requirement of any other license also? -
Requirements for Cisco Jabber Applications
Hi,
I have to setup a lab enviornment for demonstrationg the Jabber technologies for our client.i am really new to jabber technologies and as per my understanding its a Softphone that we can install in PC and Mobile and has the features such as IM,Presence and Web-ex.
For my demonstration I am looking to Install the softphone in a windows PC.
My doubt is what all software combination required for Jabber technologies??
1)Either CUCM+Presence+Jabber(What Versons??)
2)CUCM+Jabber.(Versions??)
We have 3 MCS in our lab and running CUCM version 7.0.If we need a later version for this to support ??
I serached in google for good document but no luck.....Please give me a good documents for integeration and configuration for this requiremnets.
Thanks in advance.
Nithin louis.Hi Nitin,
May be you can follow these links to get started:
https://supportforums.cisco.com/docs/DOC-23292
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_00.html
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/8_6/b_Cisco_Mobile_for_Android.html
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_01.html#CJAB_TK_D698EA8E_00
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_010.pdf
Hope this helps.
Please rate helpful posts!!!
regards,
Abdul -
The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?
I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense. -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Open Purchase Orders not considered as requirement for MRP Run
Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
SaravananCan you check to see if there is a re-order point set up for this materia? That could be causing the problem too.
-
View requirements for delivered sales orders in MD4C.
MD4C shows requirements for open sales orders and other related data but if a delivery has been created for the order which covers complete sales order item quantity it is excluded in the report.
I want to view such requirements too. Is there a possibility of the same and how?
Or any other transaction where this can be seen?
Regards,
Sonal MurbadeHi,
When a delivery is completed (e.g. bu PGI). the requirement is not needed any more and it's deleterd in table VBBE or VBBS, so, you can not see it in requirement list any more.
You sill can see the order in table VBAP(sales order) or table LIPS (delivery).
BR -
Help define the requirements for an Oracle Spatial management tool
Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.phpAndrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name The name of the parameter.
type The type of the parameter.
size The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
I'm trying to update iTunes to 10.5.2. I have a Windows 7 64-bit Dell laptop, and when I try to update it, I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went to the troubleshooting page and did all of the steps they listed: uninstalled iTunes, deleted by Temp files, even disabled AVG while I downloaded again and tried to install. I still get the same message. If anyone can help me, I would really appreciate it!You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651
Maybe you are looking for
-
I just installed Firefox on a new laptop. Google is my home page. My opening tab is always Google. But, when I open a New Tab, it doesn't open in Google. So, I've always clicked on the house icon to take me straight to Google. Now when I do, TWO tabs
-
Search in Internal Table Utility -- Need Pointers
Hi Experts, As per my requirement i need to search for words in internal table and arrange internal table based on ranking i.e record which has maximum no. of hits should come first. Example: search for a string 'media rent'. Incoming internal table
-
[Solved] Subdomain no Database Access (MySQL)
I'm confused about the missing database connection, I have added a screenshot that explains the problem. http://postimage.org/image/f1u804lp7/full/ (1920x1080) Running Apache, MySQL, PHP, Memcache, System hostname localhost.localdomain (127.0.0.1) Op
-
Code seems logical enough to me, please help!!!!!??
int i = 0; int j = database.length; while ( i < j ) if (database[i] == null) { database[i] = bankrecord; i = database.length ; //break out of the loop termination has ended else if ( database.getUserID().equals(bankrecord.getUserID()) ) {} // do not
-
Rule or script or not possible?
Here's the deal. I have several rules set up that move my incoming mail to various mailboxes. Once in those mailboxes, I can't seem to figure out how to have individual emails deleted after a 30-day period. It appears that rules only automatically ap