Requirements for SRM 2007 (EBP:E-Procurement)?

Hi Guys,
I recently was scheduled to implement the latest release of SRM/E-Procurement to our ERP6.0 Landscape.
Unfortunately, I am pretty new to this topic and everything I know is that the latest release is SRM2007.
Could anybody tell me what exactly needs to be installed?
What packages?
As far as I know, EBP is included into SRM. But is it enough to just install SRM or do I need any additons to run EBP (E-Procurement).
The underlying system is/will be SAP ECC 6.0.
I am really looking forward to your answers
yours
Erik
Edited by: Erik Nagler on May 27, 2008 1:50 PM

SRM 2007 (SRM 6.0 )is still not avilable for general release and ongoing for ramp-up customers only.
The release was due this year but delayed.
For SRM add on installations on ECC
you should see the follow threads
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
Re: SRM Addon Upgrade Path with ERP2005 ( ERP 6.0 )
SRM 5.0 as an Add on with ECC 6.0
SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server
BR
Dinesh

Similar Messages

  • Hardware Requirement for SCOM 2007

    Hello,
    I have still SCOM 2007 R2.
    I would like to know what is or are the requirements for the hardware:
    Disk : I have 300 Gb 10 K will it be enough for the database server or 15 K is mandatory?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    the majority of measurements at least for the DB side which would be the most important aspect would be measured in IOPS. I would wait for 15k drives just b/c your going to have to live with it for a few years. weather 15k drives help your IOPS numbers will
    depend on your Raid settings and disk configuration.
    hope this helps!
    Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
    Please remember to click “Mark as Answer” on the post that helps you!
    my new blog om2012.wordpress.com

  • Using XI Content for SRM 2007

    Hi,
    We are configuring a scenario for SRM which has following landscape
    ECC <=> SAP PI <=> SRM
    I am trying to use XI Content for SRM 7.0 and I have imported SAP SRM 7.0 Software component into ESR. But there are no Process Integration Scenarios which I can use to configure objects in Integration Directory using wizards. Also there are no IDoc imported in this SC and no mappings defined. Does that mean We have to create our own mappings? But this was not true when we used SRM 5.0 content.
    I am not able to find any document which talks how to configure PI scenario using SRM 7.0 XI Content. Do let me know if there is any?
    There is another thing which comes to my mind if SRM 7.0 XI Content is using web services instead of IDoc for communication with ECC system. If that is the case then i cannot find predefined proxy in ECC system and thus i have to create custom web service server proxy (where again i have to write custom code).
    Do let me know if anybody has used XI Content SRM 2007. So that I can get some help on this.
    Thanks,
    Divyakumar

    Hi Divya,
    We have done with SRM 5.0 but not with SRM 7.0
    When i see content for SRM 7.0 in Market Place i donot find , From where did u get download those XI content for SRM 7.0 ???
    Did u find any Integration Scenarios depecting the flow , we used the same for the business flow.
    Please do update how u have proceeded.
    Thanks
    rgds
    srini

  • Backup requirements for SRM/SUS

    Hi Gurus,
      is there any special reuirement for backing up the SRM and SUS system.
    Regards!

    Normally when upgrade patches are applied to systems basis advise to backup the working clients
    but have not heard about special back up for SRM-SUS.
    BR
    Dinesh

  • Vendor field as required for SRM 7.0

    Hello,
    when we are creating a Shopping Cart, I need to put vendor field as mandatory for some categories in SAP SRM 7.0
    I know how to do it in SAP SRM 4.0, however they change it in this version...
    could you please help me?
    Thanks.
    Regards,
    Nelson

    Hello,
    Have you tried to use BBP_DOC_CHECK_BADI?
    Depending on the product category, you can check if vendor field is empty. If so, an error message would be raised.
    Kind regards,
    Ricardo

  • Some questions on SRM 2007

    Hi All
    As per my earlier knowledge SRM 2007 ( EBP 6.0) is going to be released in Q4 2008.
    I read some people referring to it as SRM 7.0.
    1) Is this wrong or SAP has officially changed it to SRM 7.0.
    2) What is the corresponding version for SUS ?
    3) Is MDM an absolute must for SRM 2007 , or CCM is OK?
    Regards
    Kedar
    Edited by: Kedar Ghayal on Aug 15, 2008 1:35 PM

    Hello everyone,
    I found this thread incredibly interesting.  There are frequent questions coming from clients and internally about SRM 7.0.  But there seems to be a lack of documentation (or at least itu2019s difficult to find).  The last official memo from SAP I know of is nearly a year old (Oct 2007 https://websmp203.sap-ag.de/~sapdownload/011000358700001040832007E/SRM2007Communication.pdf).  The release documentation (https://websmp208.sap-ag.de/releasestrategy) is dated Jan 2008, which states release November 2008.
    In light of this have a couple of questions:
    - Does anyone have (or know of) any documentation detailing the new functionality compared to SRM 5.0 (or SRM 4.0)?
    - Does anyone know of any more recent official communication from SAP other than those mentioned above?
    Any help gratefully received.

  • Business Package for SRM 7.0 EHP1

    Dear `SRM Gurus,
    What is which SRM business package version required for SRM 7.0 EHP1
    Reagrds,
    Vinod

    It is BP SRM 7.01

  • Mutiple Bidding for SRM 7.0 SP01

    Hi All,
    We have one requirement for SRM 7.0, we want to use Single step bid and two step bid, which will depend on requirements.
    Any ideas, how to achieve this two step bidding?
    Thanks,
    Ankur

    Hi,
    Could you explain details of "2 step bidding"?
    Is it 2nd round of RFx? 1st RFx is like RFI for 10 suppliers and 2nd Rfx is like RFQ for 5 suppliers.
    Regards,
    Masa

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • Pdf doc  is required for  B2C  CRM 2007  WEB SHOP

    Hello Experts,
    We have a scenario where (pdf doc ) is required for  b2c Header level and tem level in CRM 2007 web channel.
    we  have set up a product and product catalog and maintained a PDF document in the HEADER AREA--
    Documents Tab--BDS_PDF folder.
    After intial replication Documents was published in the following path 
    *catalog/DE DE161EE3D35DAAF19F1E000C29D94525.pdf     *
    we are able to find images and pdf in the  index server but unable to  see the same in the web shop.
    Did I miss some thing ? Do I need to do any other settings in XCM or in JSP?
    Thanks in advance
    Namitha Verma

    Hello  namitha Verma
      I am facing the same problem, are  you able solve the problem kindly let me know .     
    Regards
      Kiran Posanapalli

  • Error running XL Reporter: 'a required COM add-in program..' for Excel 2007

    I have 2 users running Excel 2007 that can't run XL reporter.  They get the message 'a required COM add-in program for XL Reporter has not been loaded'.  I have instructions for Excel 2003, but not for 2007.  Does anyone know how to resolve this for Excel 2007?

    Gordon,
    I have instructions to get the IXXLReporter.dll file in the installation area, but 2007 has completely different layout. I can't find where to go???  Can you please give me the procedure?
    Edited by: Pat Frohlich on Apr 1, 2009 10:12 AM

  • Ipc for SRM self service procurement

    we are setting up our SRM server for self-service procurement, when I try to configure IPC server, the administrator tool ask me which system for IPC to connect to: DATABASE, CRM system or R/3 system. there is not an option for SRM system. which one should I choose? I picked CRM system and IPC seem to work fine, is SRM considered CRM system in this case?
    Thanks
    Jane

    Dear Jane
    At many places specially for middleware settings Srm uses CRM middleware settings as SRM in not fully concise with middleware settings.
    Like where we define the sites in transcation SMOEAC we use R/3 and CRM sites to define the SRM and r/3 sites.
    Many at places SRM uses CRM infrastuture for middleware settings.
    Regards,
    Nimish Sheth

  • SAP components required for implemeting SAP SRM MDM

    Hi all,
    Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
    · Internal catalogs hosted and maintained by buyer?
    · Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
    · External catalogs hosted and maintained by vendor?
    Thanks and regards
    Harish

    Hi Harish,
    The SAP components you would be needed are
    SAP MDM5.5 or 7.1
    - MDM server
    - MDIS server
    - MDSS server
    SAP SRM5.5 or 7.0
    SAP SRM-MDM business content
    WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
    If you need an integration with backend system SAP PI will be used.
    refer note
    1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
    refer article for understanding mdm catalog configuration steps
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
    Regards,
    Abhijeet
    Edited by: abhijeet more on Apr 20, 2009 1:19 PM

  • Workstation Requirements for SAP SRM 5.0

    Hi All-
    We have a requirement from our client to provide all all possible workstation requirements for SAP SRM 5.0 to be running on Users Work station. I searched OSS notes but found none. Can anybody please share any information that you guys might know?
    Thanks,
    Sundeep

    Hi,
    You can use so called 'thin client' for example Citrix.
    Minimum requirements for user workstation is:
    - procesor Pentium III or IV 1GHz or equivalent
    - memory 512MB
    - HDD 15GB
    - web browser IE5.0 or higher
    - in some cases Java VM. (JRE)
    Most of my clients uses something like that.
    Regards,
    Marcin

  • Is WMI required SCCM client 2007 agent for working

    A Quick Qustion
    Is WMI required SCCM client agent for working
    what is the neccesity for WMI on SCCM client agent 2007
    How SCCM CLient affect if WMI corrupt
    could any one explaine
    Its not only a question I am facing sccm client agent corrupted
    shinu

    Yes, functional WMI is a requirement for the SCCM client to work. One sign of WMI being corrupt is that the client won't receive any policies from the MP.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

Maybe you are looking for

  • What do i do if i have two apple id accounts?

    Ok so i had a HP labtop that i had my itunes on with my itune account. Then i bought an iphone and when i was creating my account for icloud i didn't even think or realize to use the same account as my itunes. Then just recently i bought my MacBook a

  • Is this roughly how the labVIEW Execution Systems work?

    I've not taken a class in OS design, so I don't know the strategies used to implement multitasking, preemptive or cooperative. The description below is a rough guess. LabVIEW compiles Vis to execute within its own multitasking execution environment.

  • Garageband 3.01 will not load with System 10.4.4,5 or 6

    Hello Helpful Forum I upgraded to system 10.4.4 (then .5 and .6) on my 17in POWERBOOK 1.67. What a mistake. Not only does Garageband 3.0 or 3.0.1 not load but the Help feature in every program crashes whenver I try to use it. The BACKUP application f

  • Problem in downloading ALv Grid output

    Hi Friends,    I've made an ALV report using the FM: REUSE_ALV_GRID_DISPLAY. Now when I try to download the output in excel using the path:LIST->EXPORT->EXCELSHEET, the 'excelsheet' option is showing as disabled. This is happening only for this repor

  • Alternative to WMIC csproduct get name?

    Everyone, I am currently attempting to find a work around that will allow me to leverage a single WDS/MDT image for all of my PC hardware. At the moment, my biggest hurdle comes from hardware manufacturers that are not properly labeling their hardwar