Requirements for the Interactive Graph -- Process Monitoring in WLI
Hi,
In my WLI console I m not able to bring the Graphical View for the Process Monitoring. My server is running on HP-UX -11, however I am able to view the graph from the workshop (windows desktop). Is there any server side requirement for the Graphical view?
You have to run xvfb (X Window virtual frame buffer) on the HP-UX box. You have to download that from HP's website. Run it using root user only. Set the DISPLAY of your admin server to the xvfb and then you will be able to see the graphical view.
Similar Messages
-
Requirement for the Q monitoring report
Hi experts,
i have this requirement. could you please tell me the solution.
<b>Requirement for the Q monitoring report
Transaction code LL01
Requirement: The report to be generated for the open documents in all six warehouses D01 to D06.
Option can be that one batch job should be created in ECQ which will run everyday and give us the report.
Variants are set for all warehouses to capture the report.
Please note that theses variant is set to capture all the Stocks in interim storage types except 915
Additional Variant is also set into the report to take the CREATED BY field in the displayed data. This can also be automated in the report.
The steps which we follow to get the report is as follows
Thanks & Regards
Venkat</b>Hi,
I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
or u have to develop customized report.
Pradeep -
QC51:No certificate is required for the purchase order item
Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
YodaHi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21 Cert. of conformity "2.1" EN 10204
E22 Test certif. "2.2" EN 10204
E23 Works test certif. "2.3" EN 10204
E31A Insp. certificate "3.1.A" EN 10204
E31B Insp. certificate "3.1.B" EN 10204
E31C Insp. certificate "3.1.C" EN 10204
E32 Inspection report "3.2" EN 10204
Q001 Conformance Report
Q002 Plating Certificate
Q003 Test Report
Q004 Certificate through Web
Q005 Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar -
The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?
I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense. -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.
I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left. -
I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?
Apple Menu --> About this Mac.
Mylenium -
I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?
Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts; -
When trying to load music from ITunes to my ipod I receive the error "The software required for the ipod is not installed correctly. Please reinstall itunes to install the required sotware"
What should I do to correct the error?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal -
TITLE for the Interactive report
Hi,
I like to show a Title for the Interactive Report in several different languages.
But it seems if I just pick Interactive report, there will be no Title shown.
What is proper way of doing this ?
So, what I did was, I created a HTNL region, just to show the Title, but it seems the translation and XLF file doesn't pick it up
Please help
--JohnI have further to report.
It looks like a bug.
The REGION title text is missing in "TRANSLATE APPLICATION" in "SHARED COMPONENTS" under WINDOWS environment.
The REGION title text is in SUN environment, but does not shown as translated in the browser.
Thx
--John -
Best Practice for the Vendor Consignment Process
Hiii ,,,
Can anybody have the best practices for the Vendor consignment process???
Please Send me the document.
Please explain me the Consignment process in SAP??
Thanx & Regards,
Kumar RayuduHi Kumar,
In order to have Consigment in SAP u need to have master data such as material master, vendor master and purchase inforecord of consignment type. U have to enter the item category k when u enter PO. The goods receipt post in vendor consignment stock will be non valuated.
1. The intial steps starts with raising purchase order for the consignment item
2. The vendor recieves the purchase order.
3. GR happens for the consignment material.
4. Stocks are recieved and placed under consignment stock.
5. When ever we issue to prodn or if we transfer post(using mov 411) from consignment to own stock then liability occurs.
6. Finally comes the settlement using mrko. You settle the amount for the goods which was consumed during a specific period.
regards
Anand.C -
Javascript is required for the Electronic Delivery system.
I use VPN to access the remote server, and the software will downloaded in the remote server, but when I go to the Oracle e-delivery, and press continue, I got a message: Javascript is required for the Electronic Delivery system. What's wrong with me?
Sounds like your browser settings are stopping you using the website.
Cheers
John
http://john-goodwin.blogspot.com/ -
I have a requirement for the Standard report like QA33
Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMALWhen changing or deleting one or more lines of the internal table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
At the time of the termination, the table contained 2 lines.
This is the error
I went to se80 and copied the whole program - > but getting this error
Maybe you are looking for
-
I had to install a new hard drive. How do I get Lion to reinstall w/o paying $29.95 again?
I had to install a new hard drive. How do I get Lion to reinstall w/o paying $29.95 again?
-
Folks, I have a requriement to park all incoming invoices via EDI/XML channel. What it needs to achive this. All inputs would be deeply appreciated. Thanks.
-
Plist strings to UILabel: formatting specific words in the text?
Developers, I have a UILable populated by a plist string. I would like the UILabel to display text, with specific words in bold format. I have looked around for a solution to this problem, but I haven't found anything useful on the net. Is this possi
-
Acrobat X: improved functions from VBA?
Hello, I use Acrobat to print create some PDF files from Excel 2010, from Visual Basic for Applications (VBA). Are there any new and improved functions in VBA for Acrobat X? What is the best/fastest way to print to PDF from VBA in Excel 2010 for Acro
-
Centrally control all report links for all requests
hi, is it possible to set once then all requests are applied to this setting. for example, all requests have same report links. Refresh - Print - Download if possible, I dont need to set all charts. thanks