Requirements for upgradation from 4.7 to ECC 6.0

Hi Guru's,
Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji

Similar Messages

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Features and Functionalities of ECC 6.0 for upgrade from 4.7 to ECC 6.0

Hi All,
Can you let me know the features and functionalities of ECC 6.0 as we are planning to go for upgrade from 4.7 to ECC 6.0...
Cheers
Prasanna

And you can see the PAM for your architecture.....
Do you want to use the JAVA instance?
Change from no-unicode to unicode?
Do you have MDMP?
Regards,
Alfredo.

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Requirements for upgrading from LR3 to LR4

The processor requirements for LR4 reads "Multicore Intel processor with 64 bit support." The processor description in the iMac I bought in early 2009 reads "2.8 GHZ Intel Core 2 Duo." Will my processor handle LR4?
Thank you
Jim B

As mentioned above the d/load will be the current release whereas the disk version will be 4.0 and need updating.
There are many differences between Lr3 and 4 though including catalogs (Lr3 catalogs will have a copy made and upgraded) and processing (a new process version) which can alter image appearance of existing files. So don't update the process version on existing files before you have experimented - I do it only when reviewing a file if I feel I can work it better with the new version, not updating the whole lot at once!!

Document for upgradation from 4.7 to ecc 6.0

HI Everyone,
Can any one pls mail me some helpful documents regarding upgradation, what all things needs to be taken care and many more.
my email id is <b>[email protected]</b>
Thanks in advance.
Sunny

Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji

Upgrade from 4.7 to ECC 6.0 and MICR no longer printing

Hello,
We are in the process of upgrading from 4.7 to ECC 6.0. Our checks in FI and HR which have MICR fonts/lines are no longer printing the MICR lines. Any ideas on what to check?

Hi Kenneth,
If you have any documentation for Upgrading from 4.7 to ECC 6.0 can you pls send it to me ?
Thanks
Christine

Check List for Functional Upgrade from 4.7 to ECC 6.0

Hi Gurus,
Cany anybody tell me what is the check list for SAP SD Functional Upgrade from 4.7 to ECC 6.0.?
My Email : [email protected]
Points for sure for useful answer
Venkat
Edited by: Venkat Goteti on Feb 4, 2008 5:34 AM

If it is possible can you send me file to [email protected]

Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that

Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Upgrade from 4.7 to ecc 6.0

hi
it would be great help if you tell me about the upgrade from 4.7 to ecc 6.0 am an sd functional consutlant so wat would be my role in this upgrade and are the transaction codes and menu path same or have some changes in it and could please tell me some sd transaction code and some interview related question wat they ask while taking an upgrade interview for a sd consultant
thanks in advance
priti

Dear Priti,
Visit the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/ .......give source and target versions to find the difference.
Major difference is ECC6 is netwear product having WASJAVA+ABAP secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides.
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack. 4.6C supports NONUNICODE.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/4d2091de9657bfe10000000a155369/content.htm
Hope this will help.
Regards,
Naveen.

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

What is the impact of R/3 upgradation from 4.7 to ECC 6 on BI

Dear all,
Can any one tell me what will be the impact of R/3 Upgradation on BI... as we are shortly going to upgrade our R/3 from 4.7 to ECC 6.
Do we need to take any precautions in R/3 and aswell as BI
Please give the information...points will be given
Regards
venu

Hi
Please Refer this as this vll give u the Pros and Cons for upgrade.
Refer
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
This Wiki contains Rob Moore's ( BW Manager, Edwards Limited) teams experiences in upgrading Business Warehouse System from 3.0B to BW 7.0.
Contents
1 Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
2 Introduction
3 Overview & Scope
4 Drivers
5 Environment
6 Resource & Timescales
7 High Level Plan
8 Summary Task List
8.1 #Support Pack Hike
8.2 #Plug-in installation
8.3 #PREPARE process
8.4 #Dbase upgrades
8.5 #System Upgrade
9 Lessons Learnt
10 Issues & Fixes
10.1 Unfixed Issues
10.2 Fixed Issues
11 Regression Testing Process
11.1 Introduction
11.2 Set up
11.3 Actions
11.4 Security
12 Transport Freeze
13 Web Applications
13.1 Dashboards
13.2 Internet Graphics Server (IGS)
14 Detailed Task Lists
14.1 Support Pack Hike (detail)
14.2 Plug-in installation (detail)
14.3 Dbase upgrades (detail)
14.4 PREPARE Process (detail)
14.5 System Upgrade (detail)
Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
Introduction
This Wiki contains my teams experiences in upgrading our Business Warehouse System from 3.0B to BW 7.0.
Hopefully it will be useful to anyone else who's about to embark on this. If there's anything I've missed or got wrong, then please feel free to edit it or contact me and I'll try to explain.
Rob Moore - BW Manager, Edwards Limited.
Overview & Scope
This was to be a technical upgrade of BW only. The new BW 7.0 web functionality & tool suite which requires the Java stack rather than the ABAP stack was out of scope. We had heard that the latter was where most of the problems with the upgrade lay. Our plan is to wait for this part of BW 7.0 to become more stable. Also it has a big front end change and the business didn't have sufficient resource to cope with that much change management.
Drivers
3.0B at the end of its maintenance
Opportunities to do better reporting
Options to utilise BI Accelerator
Environment
Our R/3 system was at 4.6C and was not going to be upgraded. We have APO at version SCM4.0.
Our BW system is approximately 300 GB, with 125 global users. It was at version 3.0B SP 18
We have Development, Acceptance and Production environments.
Resource & Timescales
The Project ran for 3.5 months from Feb to May 2007. We used the following resources. The percentages are the approx. amount of their time spent on the project.
Project Manager * 1 70%
BW technical team * 3 50%
ABAP coder * 1 10%
SAP Systems Development expert * 1 20%
Basis * 1 25%
High Level Plan
These are the basic areas. We planned to complete this process for each environment in turn, learning our lessons at each stage and incorporating into revised plans for the next environment. However we did the Support Packs and Plug-Ins in quick succession on all environments to keep our full transport path open as long as possible.
Upgrade BW to the minimum support pack.
Install R/3 Plug-ins PI 2004.1
Run PREPARE on BW
Dbase upgrades (Database & SAP Kernel upgrade)
System Upgrade
Summary Task List
This list contains all the basic tasks that we performed. A more detailed check list is shown below for each of the headings.
#Support Pack Hike
We moved only to the minimum acceptable SP as this seemed most likely to avoid any problems with the 3.0B system prior to the upgrade.
Apply OSS 780710 & 485741
Run Baseline for Regression tests
Full Backup
Apply SP's (we were at SP18, going to SP20)
SPAU list review
Regression testing
#Plug-in installation
Apply SAP note 684844
Import and patch Basis plugin PI 2004.1
SPAU list review
#PREPARE process
BW Pre-Prepare tasks
BW - Inconsistent Data fix
Run PREPARE
Review of results
Any showstoppers from PREPARE?
#Dbase upgrades
Database Upgrade (FixPak)
SAP Kernel Upgrade
#System Upgrade
Reverse Transport of Queries
Reconnect DAB & SAB to AAE
Run Baseline for Regression tests
Full Backup
Run the Upgrade
SPAU list review
Regression testing
Lessons Learnt
Testing is all! We picked up on a lot of issues, but would have picked up more if we'd had a full copy of our production environment to test over.
Our approach of doing a full upgrade on each environment before moving to the next one paid dividends in giving us experience of issues and timescales.
Write everything down as you go, so that by the time you get to upgrading production you've got a complete list of what to do.
We succeeded because we had people on our team who had enough experience in Basis and BW to be able to troubleshoot issues and not just read the manual.
The SAP upgrade guide is pretty good, if you can understand what they're on about...
Remember the users! The fact that the loads have been successful doesn't count for anything unless the users can see the data in Excel! There's a tendency to get caught up in the technology and forget that it's all just a means to an end.
Issues & Fixes
I've listed the main issues that we encountered. I have not listed the various issues where Transfer rules became Inactive, DataSources needed replication or we had to reinstall some minor Business Content.
Unfixed Issues
We could not fix these issues, seems like SP 13 will help.
Cant delete individual request from ODS
After PREPARE had been run, if we had a load failure and needed to set an ODS request to Red and delete it, we found that we could not. We raised an OSS with SAP but although they tried hard we couldn't get round it. We reset the PREPARE and still the issue persisted. Ultimately we just lived with the problem for a week until we upgraded production.
Error when trying to save query to itself
Any query with a re-usable structure cannot be saved (more thsan once!)
OSS 975510 fixed the issue in Dev and Acc, but NOT in Production! SP 13 may solve this once it's released.
Warning message when running some queries post-upgrade
Time of calculation Before Aggregation is obsolete. Not a big issue so we haven't fixed this one yet!
Process Chain Scheduling Timing error
Process chains get scheduled for the NEXT day sometimes and has to be manually reset.
See OSS 1016317. Implement SP13 to fix this. We will live with it for now .
Fixed Issues
Duplicate Fiscal Period values in Query
If you open up a drop down box ("Select Filter Value") for Fiscal Year/Period to filter your query, you are presented with duplicate entries for Month & Year.
Due to Fiscal Year Period InfoObject taking data from Master Data not InfoProvider. Thus it picks up all available periods not just Z2.
Auto-Emails being delayed
Emails coming from BW from process chains are delayed 2 hours on BW before being released
Due to userids that send these emails (e.g. ALEREMOTE) being registered on a diffferent timeazone (i.e. CET) from the BW system (i.e. GMT)
Pgm_Not_Found short dump
Whenever a query is run via RRMX or RSRT
Call transaction RS_PERS_ACTIVATE to Activate History and Personalisation
Characteristics not found
When running a query the warning message Characteristic does not exist is displayed for the following: 0TCAACTVT, 0TCAIPROV, 0TCAVALID
We activated the three characteristics listed and the warnings stopped. NO need to make them authorisation-relevant at this stage.(also did 0TCAKYFNM)
System generated Z pgms have disappeared
Post-upgrade the system Z-pgms ceased to exist
Discovered in Development so we compared with pre-upgraded Production and then recreated them or copying them from production.
Conversion issues with some Infoobjects
Data fails to Activate in the ODS targets
For the InfoObjects in question, set the flag so as not to convert the Internal values for these infoobjects
InfoObject has Conversion routine that fails, causing load to fail
The routine prefixes numeric PO Numbers with 0s. SD loads were failing as it was not able to convert the numbers. Presumably the cause of the failure was the running of the Pre-Prepare RSMCNVEXIT pgm.
Check the Tick box in the Update rule to do the conversion prior to loading rather than the other way round.
Requests fail to Activate on numeric data
Request loads OK (different from above issue) but fails to Activate
Forced conversion within the update rules using Alpha routine. Deleted Request and reloaded from PSA.
Database views missing after pre-PREPARE work
Views got deleted from database, although not from data dictionary
Recreated the views in the database using SE14.
Workbook role assignations lost
We lost a few thousand workbook assignments when we transported the role they were attached to into Production
The workbooks did not exist in Development, thus they all went AWOL. We wrote an ABAP program to re-assign them in production
Regression Testing Process
Introduction
We were limited to what we could do here. We didn't have a sandbox environment available. Nor did we have the opportunity to have a replica of our production data to test with, due to lack of disk space in Acceptance and lack of sufficient Basis resource.
Set up
We manually replicated our production process chains into test. We didn't have any legacy InfoPackages to worry about. We asked our super-users for a list of their "Top 10" most important queries and did a reverse transport of the queries from Production back into test (as we do not generally have a dev/acc/prodn process for managing queries, and they are mostly created solely in prodn). We made sure every application was represented. In retrospect we should have done some Workbooks as well, although that didn't give us any problems.
Actions
Prior to the various changes we loaded data via the Process chains and ran the example queries to give ourselves a baseline of data to test against. After the change we ran the same queries again and compared the results against the baseline. We tried to keep R/3 test environments as static as possible during this, although it wasn't always the case & we often had to explain away small changes in the results. After upgrading BW Development we connected it to Acceptance R/3, so that we had pre-upgrade (BW Acceptance) and post-upgrade (BW Development) both taking data from the same place so we could compare and contrast results on both BW systems. We did the same thing once BW Acceptance had been upgrading by connecting it (carefully!) to Production R/3. To get round the lack of disk space we tested by Application and deleted the data once that Application had been signed off. Once we got to System test we involved super-users to sign off some of the testing.
Security
We chose to implement the new security schema rather than choosing the option to stick with old. For us, with a relatively small number of users we felt we could get away with this & if it all went wrong, just temporarily give users a higher level role than they needed. Our security roles are not complex: we have end user, power-user and InfoProvider roles for each BW application, together with some common default roles for all. In the event we simply modified the default "Reports" role that all our users are assigned, transported it and it all went smoothly. Apart from the fact that everyone's workbooks are assigned to this role and so we "lost" them all !
Transport Freeze
Once you've upgraded Development you've lost your transport path. We planned around this as best we could and when absolutely necessary, developed directly in Acceptance or Production, applying those changes back to Development once the project was complete. Depending on what other BW projects you have running this may or may not cause you pain!
Web Applications
Dashboards
We had various dashboards designed via Web Application Designer. All these continued to function on the upgraded system. However there were various formatting changes that occurred e.g. Bar graphs were changed to line graphs, text formats on axes changed etc. SAP provides an upgrade path for moving your Web applications by running various functions. However we took the view that we would simply re-format our dashboards manually, as we didn't have very many to do. Plus the external IGS (see below) powered all our environments and needs upgrading separately as part of the SAP method. Thus we couldn't have tested the SAP path in Development without risking Production. Sticking with manual mods was a lower risk approach for us. We did find we had to re-activate some templates from BC to get some of the reports to continue to work.
Internet Graphics Server (IGS)
We had an external IGS server with v3.0B. Post-upgrade the IGS becomes part of the internal architecture of BW and thge external server is redundant. We found no issues with this; after the upgrade BW simply stops using the external IGS and no separate config was needed.
Detailed Task Lists
Support Pack Hike (detail)
Apply OSS 780710 & 485741
Communicate outage to users
Warning msg on screen
Stop the jobs which extract data into delta queues
Clear the delta queues by loading into BW
Check RSA7 in PAE that delta queues are now empty
Run Baseline for Regression tests
Stop Delta queues
Lock Out users
Full Backup
Apply SP's
Upgrade the SAP kernel from 620 to 640
SPAU list review
Apply OSS Notes 768007 & 861890
Unlock Test users (inc. RFC id's on R/3)
Regression testing
Regression sign-off
Remove warning msg
Unlock users
User communication
Plug-in installation (detail)
Communicate outage to users
Warning msg on screen
Apply SAP note 684844
Lock out users
Full Backup
Empty CRM queues
Import and patch Basis plugin PI 2004.1
SPAU list review
Apply OSS 853130
Switch back on flag in TBE11 (app. BC-MID)
Remove warning msg
Unlock users
User communication
Dbase upgrades
Dbase upgrades (detail)
Communicate outage to users
Warning msg on screen
Run Baseline for Regression tests
Stop the Data extract jobs
Full Backup
Lock Out users
Apply FixPak13SAP to DB2 database
Upgrade the SAP kernel from 620 to 640
Apply OSS 725746 - prevents RSRV short dump
Unlock Test users (inc. RFC id's on R/3)
Regression testing
Regression sign-off
Remove warning msg
Unlock users
User communication
PREPARE Process (detail)
Pre-PREPARE Process
RSDG_ODSO_ACTIVATE
Repair Info objects and recreate the views
Communicate outage to users
Warning msg on screen
Run Baseline for Regression tests
Stop the Data extract jobs
Lock Out users
Full Backup
Run RSMDCNVEXIT Using BSSUPPORT ID
If there conversion process runs longer delay the regular backup
Re-run Baselines and sign off
If there conversion process Fails repeat the steps on Sunday after the regular backup
BW work
Back up customer-specific entries in EDIFCT (note 865142)
Activate all ODS objects
Execute report RSUPGRCHECK with flag "ODS objects" (note 861890)
Check Inconsistent InfoObjects - Upgr Guide 4.4; OSS 46272; Convert Data Classes of InfoCubes - Upgr Guide 4.3
Execute report SAP_FACTVIEWS_RECREATE (note 563201)
Make sure Delta queues are empty (RSA7)
Basis Work
Full Backup of BW
Lock users
Unlock id's RFC id's and designated test users
Confirm backup complete OK
Apply OSS 447341 Convert Inconsistent Characteristic Values - Upgr Guide 4.5
Confirm OK to PREPARE
Run PREPARE
Review of results
System Upgrade (detail)
Communicate outage to users
Process errors from PREPARE
Check disk space availability for PAB
Warning msg on screen
Reverse Transport Queries from PAB to SAB & DAB
Change BW to R/3 connection
Get backup put on hold, for Ops to release later
Ensure Saturday night backup is cancelled
Final run of PREPARE
Run Baseline for Regression tests
Clear Delta Queues
Delete Local Transports
Remove process chains from schedule
Lock Out users (with some exceptions)
Confirm to Ops and Angie that we're ready
Full Backup
Incremental backup of Unix files
UPGRADE "START"
Back up kernel
Unpack latest 700 kernel to upgrade directory
Check ids required for upgrade are unlocked
Check no outstanding updates
Turn off DB2 archiving
Open up the client for changes
Stop saposcol, & delete from exe directory
Run the Upgrade
Execute the saproot.sh script
Perform the database-specific actions
Perform follow-up activities for the SAP kernel
Reimport additional programs
Import Support Packages
Call transaction SGEN to generate ABAP loads
Transport Management System (TMS)
Handover to BW Team
SPAU list review
Apply OSS Notes from SPAU
Process Function Module XXL_FULL_API (part of SPAU)
Restore table EDIFCT (if required)
Transport Fixes from our BW Issue list
Convert the chart settings - manually
Perform activities in the Authorization Area
Activate hierarchy versions
Update the where-used list
Execute the conversion program for the product master
Transport New roles to PAB
Unlock selected users
Regression testing
Regression sign-off
Go / No Go decision
Restore if required
Remove warning msg
Tell Ops that the CR is now complete
Lock down PAB
Unlock users
User communication
Perform the follow-up activities for SAP Solution Manager
Reschedule background jobs
Reschedule weekly backup on Ctrl-M
Drinks all round.
Vendors mentioned: dBase
Hope this helps.

Upgradation from 4.5B to ECC 6.0

Hi,
We are doing an upgrade from 4.5B to ECC 6.0. any relevant documents are invited.Can somebody help me with procedure.
Documents can also be send to my mail id: [email protected]
Thanks,
Satish.

Dear Satish,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Upgrading from 4.6 to ECC 6.0

Hello all,
Kindly can any one provide me documentation on upgrading from 4.6 to ECC 6.0 Related to Finance Module.
It will be very helpful If you can help me in the upgrading process of Finance/controlling about the activities Involved.
Email id : [email protected]
Thanking you in advance
cheers
Veena

Dear veena peddineni,
Hope this helps you.
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Requirements for upgradation from 4.7 to ECC 6.0

Similar Messages

Maybe you are looking for