Requirements Gateway and XML Reports

Hi,
before reinventing the wheel once more, i would ask if anyone has already written a NI-Requierments Gateway Type that supports
the XML-Reports based on the old Teststand 2.0 XML-Style ?
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Hi Juergen,
thank you for using the National Instruments Forum.
I could not find anything specific relating to your request. Maybe this document is of any help:
Coupling NI Requirements Gateway with NI TestStand
http://www.ni.com/white-paper/8422/en
Regards, Topper

Similar Messages

Relating rdf and xml reports

Hi all
i have one report6i/10g xml output file and xml report xml output file.
both output files are xml format. My question is how to
find out whether it's report6i/10g output or xml report output?
Thanks in advance,
Narendra G.

My question is how tofind out whether it's report6i/10g output or xml report output?>
i think did not find
but you can add some tag: ...<source>rdf</source>...or add any comment to xml:

Requirements Gateway and TS-Intermidiate File II

Hi
I have asked in this thread about the TestStand Intermidiate file.
http://forums.ni.com/t5/NI-TestStand/Requirements-Gateway-TS-Intermidiate-File/m-p/2288998/highlight...
At the moment I am writing my own intermidiate file generator. To keep it simple as possible i have tried to derive it from the NI's one's. One Attribute i could not explain is: "canGenerateResults" in the step element tag.
Is it possible to tell me how this flag value is created?
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Solved!
Go to Solution.

Hi Daniel,
what you have descriped is the attribute: recordResult.
but the word "sequence" pointed me to the right flag.
The attribute: canGenerateResults ist created by.
Sequnence Properties -> Tab:General-> Checkbox Disable Result Recoding for All Steps.
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Requirements Gateway - Searching for requirements in table rows in a Adobe PDF file

In my quest for creating a good understanding of the coverage of requirements of my test cases I download the NIRG (NI Requirements Gateway) and started out importing my SRS (System Requirement Specifications) documents and some of the test cases. There are many different types of sources which can be imported (Word, Excel, Visio, Access, PDF, ...) and NIRG uses REGEX (Regular Expressions) for extracting the requirement and coverage information of the sources. NI have defined some standardized REGEX formats but they (NI) have also made it possible for tweaking these to fit your purpose.
Instead of adding/changing the SRS documents to fit these standardized REGEX formats, I dived into how to create REGEX for my purpose.
Check out
- http://www.regular-expressions.info/
- http://opencompany.org/download/regex-cheatsheet.pdf
NI Requirements Gateway Coupling Series
(http://zone.ni.com/devzone/cda/tut/p/id/8414)
NI Requirements Gateway for Test, Measurement, and Control Applications
(http://zone.ni.com/devzone/cda/tut/p/id/3721)
Is there anyone who have any experience on using NIRG on a PDF document to get information from the rows in a table?
Best Regards,
Marcus
Marcus Törndahl
Senior Software Designer @ Prevas AB

Hi Manooch_H,
Here is the example document and thank you for taking the time and helping me out .
The columns which I would like to import into NIRG are actually all of them. The UC, Verification, Priority and Responsible columns should be imported as attributes to the requirement. The ID and Requirement columns should be imported as the Requirement and Text respectivaly.
Best regards,
Marcus
Marcus Törndahl
Senior Software Designer @ Prevas AB
Attachments:
SRS.pdf ‏212 KB

Come The New Requirements Gateway Users Group

Hello all,
Have you ever tried to find an answer to a issue you are having with Requirements Gateway and been frustrated by not finding a dedicated forum or users group, well no longer!
A Requirements Gateway User Group has been created on the communities and everyone, even those who are only curious, is invited to join. There isn't much content at the moment since it's still a bit of a fledgling. Please join and add your content, questions, & tips to help us grow.
You can join by going to https://decibel.ni.c...way-users-group
See you there.
Wire Warrior
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Hi D. Kelley,
Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
identities command in this
page.
You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

No Requirements Gateway Forum?

We have decided to try using NI's Requirements Gateway. We're also having some issues with it (the existing documentation is terrible once you get beyond the basic tutorial). I found some links to what looked like a forum for RG, but they all come up with errors.
Is there or will there be a forum for users of this program?
Rob

Hello all,
Several of us have experienced the pain of trying to find an answer to a issue with Requirements Gateway and not finding a users group or forum to look to for answers. I have created a Requirements Gateway User Group on the communities and I invite you all to join. There isn't much content at the moment since it's still a bit of a fledgling. Please join and add your content, questions, and tips.
You can join by going to https://decibel.ni.c...way-users-group
See you there.
Wire Warrior
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Requirements Gateway - Front Panel Objects

Hi,
I am just about to start using the requirements gateway and I have a couple of questions to help me get going...
1 - If I create a vi on a machine without RG installed and then move it to a machine with the RG installed, will the tags still be recognised?
2 - Does RG recognise the [Covers XX] syntax if it is on a front panel and not the block diagram?
Thanks for your help.
Darren.
Solved!
Go to Solution.

DazzaNL wrote:
If not, I'm always looking for an excuse for a tea break...
Don't expect it to be that bad.
Whever I see someone at NI talk about Requirements Gateway, or see them use it, I am reminded how disconnected these individuals are with how it is used in the real world. 2-3 VIs? Who has 2-3 VIs? If you have a program with 2-3 VIs I think you can track the requirements your self.
The largest program I think I used it on had something around 3000 requirements, and that went into 4000 or so derived requirements, that linked to VIs, TestStand files, and Word documents. Ever used that one tab in RG that shows how each file links to each file with requirements? The one with all the lines pointing to all the bubbles? Yeah that is utterly useless if you have more than 10 or so requirements. For that program I described it looked like a conduit made of 1000s of little lines.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Requirements Gateway and Doors Types

No Requirements Gateway board but am working with TestStand also..
I am pulling requirements from DOORS and I need to filter out a column but I cannot find a way to check that a column is NOT empty. I already made a DOORS advanced type and I am trying to edit the requirement field to filter out a column called Interface Name. I want to only pull in the rows where Interface Name is populated. I am currently pulling in useless information where the column is empty. I tried leaving the value blank and negating it to mimic a 'not empty' concept and that did not work. Any suggestions?

Hey cframe,
You should be able to do this by specifying that the object should have an attribute of a certain name. For example, this is the DOORS module for the basic DOORS example we provide with Requirements Gateway:
And here is an example of how you could configure the Requirement field to only pull requirements which have a Priority specified:
By specifying that each requirement must have an Attribute with the name "Priority", you are configuring the type to only recognize requirements which have a Priority defined.
I hope this helps, and please let me know if you run into any trouble with it--I'd be happy to help further if this doesn't solve it.
Daniel E.
TestStand Product Support Engineer
National Instruments

Import the test results and doors links back to doors with NI Requirement Gateway

Hi together,
I will try to explain my problem:
We are using TestStand, DOORS and the NI Requirement Gateway.
We created a test specification in DOORS, TestStand used the DOORS IDs to connect the TestSteps in Teststand with the requirements in DOORS.
TestStand runs the test and creates XML-results, the NIRG is able to import these XML-results back to DOORS and creates a new(!!!) DOORS module, parallel to the said test spec.
This module contains some attributes like the single test steps, the results (pass,fail, whatever, ...) but now I am missing a relationship between the DOORS test specification and these results of the XML file or better, the XML-import in the new DOORS Module.
We want to manage our test results only(!) in DOORS so it should be possible to link(!) automatically the results of the XML to the DOORS TestSpec cause we are able to transfer the DOORS-IDs or other attributes (i.e.. The "un"unique NI ID#") too!
in ASCII-art:
DOORS_TestSpec -> NI_TestStand -> NI_Result -> DOORS_Result <--------- with LINKS to the DOORS_TestSpec!!!!!!!!!
Next Step is the DOORS Analyze Tool but we need the links to follow them and to show us the results.
Would be nice to know if somebody else knows the problem or perhaps someone has an other solution. Thanks for your time!
Greet

Regarding your statement "We will generate a chunk of XML-Results, so we are not able to link all the requirements by hand", are you concerned about having to update the path to the XML files each time you run the test? In this case, I would recommend creating a directory to store only the most recent report (the report path can be modified in the TestStand report options), and set the XML report project in Requirements Gateway to point to this directory. In your TestStand sequence, you could call code which moves the previous report file into a backup location so that only the newest file is in the specified directory. THis would prevent you from needing to modify the Requirements Gateway project to access the latest report; reanalyzing would reload the project with the new file. The traceability information will therefore always be up to date, and you can see that the DOORS requirements are being covered by the test results.
I agree that there is not really a good solution for importing the XML reports into DOORS, but I think you can acheive the result you are looking for using the report files directly.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

Printing parameter values in xml report, and displaying it in header of the

Hi All,
Can anybody give me an idea to print the parameter values in the xml report.
My requirement is like, I have 10 parameters in report builder, I have generated the xml file and created the .rtf template and finally registerted in oracle apps. But now, the requirement is to print the parameter values in the report output.I don't see any xml tags in the xml output.
Any suggestion will be appreciated.
Thanks in advance.

I think all the XML attributes can contain lexicals. If you bring up the property palette against the report object you can just set the following:
XML Tag Attributes: myParameter="&<P_1>"
where P_1 is your user parameter.

Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
Rahul

Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul

Barcode's in R12.1.1 xml report output's (English and Arabic)

Dear Frednds,
we are using R12.1.1 and we need to get the barcode output's (in place of numbers) in out xml report output's.
We need it in English report and also in Arabic reports (it has seperate arabic template file)
Please let us know the method?
Regards,
DB

Desar Hussein,
1) we have downloaded and installed the Font Code128bWinLarge.ttf on windows PC.
2)Set the barcode font for the required field in the rtf Template.
3) Copied the font file, Code128bWinLarge.ttf to $OA_JRE_TOP/lib/fonts
4) Copied xdo.cfg file from our local desktop where we have BI publisher installed to
$OA_JRE_TOP/lib Directory.
5)added these lines locating barcode font location ($OA_JRE_TOP/lib/fonts
/Code128bWinLarge.ttf)accordingly.
Now For English reports we are getting the barcode
But for Arabic reports we are getting junk characters
so is there any other font available for Arabic barcode.Plerase suggest
Regards,
DB

XML Report Bursting and distribution

I want to send PDF report as an attachment to more than 200 suppliers using XML Report Bursting
In XML Report Bursting and distribution, do we need to configure the "Mail Server" on apps. (I mean any configuration is required on apps server)?
Thanks,
[email protected]

Hi,
You'll need to be able to connect to your mailserver via SMTP.
Check out the following:
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Requirement gateway report

Hi,
In the Requirement gateway i have given the requirements document. So the tool management view shows all the header information from the input word file. Please see the attached image file.
I would like to extract the header information shown on the management view in to the text file.
Is it possible? then how to do that.
i am trying to capture the text as below in the automated way of generating from the Requirement gateway.
Sample text file content from the attached image is
1.0 Tire Pressure Monitor System (TPMS) Telltale
1.1 Functional Description
Table 1.1 Tire_Press_Telltale Signal
Attachments:
imagefile.JPG ‏113 KB

Kals,
All you have to do is get the document that you would like to write the sections of, and then loop over the "Section/Entities/Requirements" of that document. One you have those elements, put a paragraph section into the loop and simply drop the display of that element into your report. See attached screenshot for example.
Message Edited by Josh W. on 10-31-2008 04:22 PM
Message Edited by Josh W. on 10-31-2008 04:24 PM
Josh W.
Certified TestStand Architect
Formerly blue
Attachments:
Report.JPG ‏12 KB

NI Requirements Gateway 2012 and Excel

Hi,
Just a short question. I have an excel file wich is saved as .xml. I would like to use it in NI-RG 2012.
Only .xls and .xlsx were supported.
I there a posibility to use my .xml file
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Hi Juergen,
Unfortunately there is no built-in type to parse .xml excel files, only the .xls and .xlsx files are supported, as you mentioned. However, you could create a custom XML type to read this data. To do so, open the Types tab in the configuration window, and click the New XML Type button at the bottom left.
Refer to the Types topic in the Requirements Gateway help for more info on creating and customizing types.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

Requirements Gateway and XML Reports

Similar Messages

Maybe you are looking for