Requirements Gateway: Visio - COM error

Dear Developers!
I have a problem using Visio files in Requirements Gateway 1.1: when I open the example project ('Visio Example.rqtf) this info is shown:
Error: COM error (Class not registered)
Error: Conversion problem (file ...\Visio Example.vsd)
The operation system is Windiws Server Standard SP1. There is no full version Visio installed only Microsoft Office Visio Viewer 2007. Could this be the problem, or should I change some configuration of the Requirements Gatewaw?
Knáb László

You can perform traceability analysis on Visio documents by capturing
traceability information from the custom properties in Visio 2003 or shape
data in Visio 2007 or by creating references in the Graphical View in
Requirements Gateway.
(Excerp from "Coupling Microsoft Visio with NI Requirements Gateway")
Hm, i would say your guess is quite promissing: you will need i full version of Visio in order to get it to work since ther is nothing said about Visio Viewer.
Maybe you can get some kind of evaluation version for Visio in order to test this.
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

  • Come The New Requirements Gateway Users Group

    Hello all,
    Have you ever tried to find an answer to a issue you are having with Requirements Gateway and been frustrated by not finding a dedicated forum or users group, well no longer!
    A Requirements Gateway User Group has been created on the communities and everyone, even those who are only curious, is invited to join.  There isn't much content at the moment since it's still a bit of a fledgling.  Please join and add your content, questions, & tips to help us grow.
    You can join by going to https://decibel.ni.c...way-users-group
    See you there.
    Wire Warrior
    Wire Warrior
    Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

    Hi D. Kelley,
    Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
    identities command in this
    page.
    You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
    https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
    https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Requirements Gateway - Searching for requirements in table rows in a Adobe PDF file

    In my quest for creating a good understanding of the coverage of requirements of my test cases I download the NIRG (NI Requirements Gateway) and started out importing my SRS (System Requirement Specifications) documents and some of the test cases. There are many different types of sources which can be imported (Word, Excel, Visio, Access, PDF, ...) and NIRG uses REGEX (Regular Expressions) for extracting the requirement and coverage information of the sources. NI have defined some standardized REGEX formats but they (NI) have also made it possible for tweaking these to fit your purpose. 
    Instead of adding/changing the SRS documents to fit these standardized REGEX formats, I dived into how to create REGEX for my purpose. 
    Check out 
    - http://www.regular-expressions.info/ 
    - http://opencompany.org/download/regex-cheatsheet.pdf 
    NI Requirements Gateway Coupling Series 
    (http://zone.ni.com/devzone/cda/tut/p/id/8414)
    NI Requirements Gateway for Test, Measurement, and Control Applications 
    (http://zone.ni.com/devzone/cda/tut/p/id/3721)
    Is there anyone who have any experience on using NIRG on a PDF document to get information from the rows in a table?
    Best Regards,
    Marcus
    Marcus Törndahl
    Senior Software Designer @ Prevas AB

    Hi Manooch_H,
    Here is the example document and thank you for taking the time and helping me out .
    The columns which I would like to import into NIRG are actually all of them. The UC, Verification, Priority and Responsible columns should be imported as attributes to the requirement. The ID and Requirement columns should be imported as the Requirement and Text respectivaly.
    Best regards,
    Marcus
    Marcus Törndahl
    Senior Software Designer @ Prevas AB
    Attachments:
    SRS.pdf ‏212 KB

  • Erreur NI Requirements Gateway

    Bonjour,
    J'essaye de charger une lvlib dans NI requirements Gateway. Pour cela je créée un projet NI Req, ajoute un document de type Labview et sélectionne ma lvlib.
    Melheureusement j'obtiens deux erreurs :
    COM error (echec de l'appel de procédure distante)
    Conversion problem (file : ma lvlib)
    La PJ donne le détail des erreurs.
    J'espère que quelqu'un pourra m'apporter un début de réponse...
    D'avance merci,
    Philippe
    Pièces jointes :
    2010-12-06_155609.jpg ‏109 KB

    Bonjour,
    Avec la même version de NI RG je n'ai pas eu de problèmes pour charger une librairie.
    Qu'est-ce qu'il y'a exactement de votre librairie ? Des classes LV ? Des controles ? Uniquement des VIs ?
    Est-ce que vous arrivez à ouvrir cette librairie avec LabVIEW sans problèmes ?
    Avez vous recompilé les VIs de cette librairie ?
    Typiquement un LVLIB est just un fichier XML qui indique ou sont situés les VIs présents dans la librairie. Il ne devrait pas y'avoir de soucis. Comment avez vous ajouté cette librairie a votre projet d'exigences ?
    Cordialement,
    Da Helmut

  • No Requirements Gateway Forum?

    We have decided to try using NI's Requirements Gateway. We're also having some issues with it (the existing documentation is terrible once you get beyond the basic tutorial). I found some links to what looked like a forum for RG, but they all come up with errors.
    Is there or will there be a forum for users of this program?
    Rob

    Hello all,
    Several of us have experienced the pain of trying to find an answer to a issue with Requirements Gateway and not finding a users group or forum to look to for answers.  I have created a Requirements Gateway User Group on the communities and I invite you all to join.  There isn't much content at the moment since it's still a bit of a fledgling.  Please join and add your content, questions, and tips.
    You can join by going to https://decibel.ni.c...way-users-group
    See you there.
    Wire Warrior
    Wire Warrior
    Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

  • I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

    I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
    I have the professional development system
    I can run the main VI
    all the required DLL's are in the dependencies section of the project window.
    I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
    Thanks in advance to all labview users for your help
    Attachments:
    project window.PNG ‏36 KB

    other PNG
    Attachments:
    Broken Arrow on EXE.PNG ‏179 KB

  • COM error while submitting certificate request

    Hello there
    I have created a group and assigned Read, Issue and Manage Certtificate, Manage CA & Request Certificate permission on the CA.When any member of this group try to sign a certificate request,
    the following error accours.
    Your request failed. An error occurred while the server was processing your request.
    Contact your administrator for further assistance.
    " type=button
    Request Mode: newreq - New Request
    Dis"font-size:9pt;">(never set)
    Disposition message: (none)
    Result: The RPC server is unavailable. 0x800706ba (WIN32: 1722)
    COM Error Info: CCertRequest::Submit: The RPC server is unavailable. 0x800706ba (WIN32: 1722)
    LastStatus: The operation completed successfully. 0x0 (WIN32: 0)
    Suggested Cause: This error can occur if the Certification Authority Service has not been started.
    During this time event ID 10016 is logged on the eventlog
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {D99E6E73-FC88-11D0-B498-00A0C90312F3}
    and APPID
    {D99E6E74-FC88-11D0-B498-00A0C90312F3}
    to the user <Domain>\<Username> SID (<SID>) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    I have assigned the required permissions to the group on
    CertSrv Request. Also verified the membership of
    Certificate Service DCOM Access.
    Can you please help me to resolve this?
    Thanks
    Ranjith

    Hi Ranjith,
    I suggest you restart the certificate services and try to enroll certificates to test if the Certification Authority is functioning.
    In addition, please make sure that ports in the blogs below are open:
    Firewall Rules for Active Directory Certificate Services
    http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Unable to resolve "Missing Required java Project : com.sap.dictionary"

    HI ,
      Iam praveen , working on web dynpro's , I imported a project template and repaired it and all the .jar files are included in the project . But still am getting some errors like the below...
    Error               Missing required Java project: com.sap.dictionary.services.     com.sap.dictionary.runtime          Build path
    Error               Missing required Java project: com.tssap.sap.libs.logging.     com.sap.dictionary.runtime          Build path
    Error               Missing required Java project: com.tssap.sap.libs.xmltoolkit.     com.sap.dictionary.runtime          Build path
    Error               Missing required Java project: org.eclipse.core.resources.     com.sap.dictionary.runtime          Build path
    Error               Missing required Java project: org.eclipse.ui.     com.sap.dictionary.runtime          Build path
    Error               The project was not built due to classpath errors (incomplete or involved in cycle).     com.sap.dictionary.runtime          
    can anyone help me in resolving these problems, i have been trying to resolve this problem , but failed. send me solution if any one can solve it
    -Praveen

    Hi praveen,
    your project refers to a dictionary that you haven't in the project. Besides, right click on the WD project and check all the external references to others projects. You must open the external projects pointed by your WD.
    Hope this help you,
    Vito

  • NI Requirement Gateway Table Requirements

    I am trying to pull requirements out of a *.docx table and understand that I must first create a custom type in order to perform this. As I understand I must edit the regular expression for the Requirement Type in order to parse the requirement from the Intermediate File. Where can I find this intermediate file in order to base my regular expression off of it?
    References:
    http://forums.ni.com/t5/LabVIEW/Associating-requirements-in-my-Word-Document-with-NI-Gateway/m-p/987...
    http://forums.ni.com/t5/LabVIEW/Requirements-Gateway-1-1-doesn-t-recognize-requirements-defined/td-p...
    Thanks,
    Craig

    Hi Craige,
    In order to generate the intermediate file, you'll need to enable it in the Project tab of the Configuration Window (see the checkbox in the image below).  Once this is selected, a folder called "Intermediate" will be created in the location of the document file, and this folder will contain the intermediate file.  Once you have this file, you can paste the contents into the Text analysis  zone (in the Expressions tab in Configuration) to test your regular expressions.
    Hopefully this clarifies things - let me know if you have further questions!
    Al B.
    Staff Software Engineer - TestStand
    CTA/CLD

  • Requirements gateway & regular expressions

    I'm trying to create a regular expression that will match a Requirement ID type in a MS Word document using Requirements Gateway.
    Our syntax for a Requirement ID is as follows:
        '* shall [::requirement id] *'
    An example would be
        'The system shall [::requirement1] self destruct after 1 minute of use.'
    I'm using the following RE.
        shall[ \t]*\[[ \t]*(.*):.+)\]
    I've been able to get it to match 'most' of Requirement ID's ,but a few aren't caught...most noteably those Requirement ID's that run past the end of the
    line.
    When 'shall' is on one line and '[::requirement1]' is on the next, the Requirement ID isn't matched.
    Are there any limitations to the RE engine that Requirements Gateway uses?
    If not, any help with the RE would be MUCH appreciated.
    thanks
    Pat

    Allen,
    Thanks for the advice.  Unfortunately it didn't help
    Again, our requirements are identified by a 'shall' followed by a tag in brackets. 
    Ie  The unit shall [<optional source>::requirement id] be expensive.
    The RE, "shall\[(.*):.+)\]" doesn't always work. (Sorry for the embedded emoticon)
    Most of the time it identifies the tag but says
    Requirement ' : XYZ' can't be covered.
    Error: Requirement defined several times
    Other times is combines two tags into one.
    I'm attaching the modifed type and the doc thats causing the problems.
    Thanks for your continued help,
    Pat

  • Is it possible to define limits, parameters, etc. (in TestStand) as requirements for Requirements Gateway?

    Hello guys,
    Actually this is more a "Requirements Gateway" question. However, as there seems to be no board for it yet, I'll try my luck here.
    So, this is my situation:
    I'm using Requirements Gateway mainly to manage changes and different versions of requirements.
    The requirements are written down in a Word file. Certain steps in TestStand sequences cover those requirements.
    What I am interested in is to be able to see when a change in my requirements has occurred but the TestStand file hasn't yet been altered to meet the new/changed requirement.
    Now by "requirement" I mean things like limits, parameters (voltages, currents, etc.).
    Does anybody know, how to do this?
    So far I am only able to process things that are formatted with the "Requirements_ID" style in a Word file.
    However, the parameters mentioned above are in the "Requirements_Text".
    Ok, sorry once more if this is the wrong place to ask this.
    Greetings from Wetzlar, Germany

    Hi there,
    I found a solution to my problem. However not with the help of the people of NI!!
    As a matter of fact, I'm still waiting for some practical advice from NI.
    When I phoned them on July 12th, the woman at the other end didn't even know at first that Requirements Gateway was a National Instruments product !!!
    I then got outreached to a guy who wanted me to mail him my problem. I did but got no answer. So I called again and was promised to be called back. Yesterday (13th), after having left for the day some guy called back and a collegue of mine left me a note with the email address of the NI guy.
    I wrote him an email this morning and I'm waiting for his reply.
    I have to admit, I expected more. Now I'm rather disappointed by NI. I mean, you buy a software worth $2000 and they don't really know it's on their products list !!! Come on!!
    However, HERE IS THE SOLUTION I FOUND:
    First load your project (if not already loaded) into Requirements Gateway (NIRG).
    In the menu bar click on "File" then on "Edit snapshots".
    A dialog box called "Configuration" will appear.
    You can now make a snapshot of your current project by clicking on "File" in the menu bar and then on "Make a snapshot of current project...".
    NIRG will prompt you for a name for your snapshot.
    Afterwards you will see your snapshot in the left column.
    Whenever a change occurs to your project, NIRG notices this (it asks you whether or not to reanalyze the project), you can now go to the "Configuration" dialog box and click on the snapshot you took earlier on.
    In the right column you will then see EVERY change in your project. When you click on an item that has changed, in the two gray fields below you can even see HOW things have changed.
    By selecting "Display" -> "Selected snapshot view" you can even see what your project looked like when you took the snapshot.
    OK, this is as far as I got.
    I won't tell NI about my solution . I'm really curious to see whether they come up with the same idea or something even better.
    Take care!
    Gabriel

  • Requirements Gateway Beta Available

      The Requirements Gateway beta is available for public use.
    Please sign up at ni.com/beta to participate!
    Features of the Beta include:
    Support for Windows Vista
    Enhanced LabVIEW type extends coverage specification to block diagrams
    Analysis of LabVIEW project (*.lvproj) and library (*.lvlib) files for large application support
    Increased impact analysis through custom and included marks
    Added types for Microsoft Office 2007 support
    PDF report generation
    ...and more!
    Josh W.
    Certified TestStand Architect
    Formerly blue

    Andrey,
    When you define a custom type in Requirements Gateway, you have the option to define the editor to open your file with.  I haven't tested it with Calc, but if you choose the "Text" editor, and then define Writer as the default program to use for ".txt" files, I believe that it should open the file.
    The problem is that navigation is not simply opening the file, Requirements Gateway will navigate to the place in the file where the requirement or coverage or section exists if you double click on one of those items.  However, it does this through the program's API (Word or Excel for example) which is not going to be equivalent to the OpenOffice API.  In this way, we can't simply drop OpenOffice in for Microsoft's product and get it to work.  The method I described above should allow you to at least open your document.
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • Requirements Gateway and TS-Intermidiate File II

    Hi
    I have asked in this thread about the TestStand Intermidiate file.
    http://forums.ni.com/t5/NI-TestStand/Requirements-Gateway-TS-Intermidiate-File/m-p/2288998/highlight...
    At the moment I am writing my own intermidiate file generator. To keep it simple as possible i have tried to derive it from the NI's one's. One Attribute i could not explain is: "canGenerateResults" in the step element tag.
    Is it possible to tell me how this flag value is created?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Solved!
    Go to Solution.

    Hi Daniel,
    what you have descriped is the attribute: recordResult.
    but the word "sequence" pointed me to the right flag.
    The attribute: canGenerateResults ist created by.
    Sequnence Properties -> Tab:General-> Checkbox Disable Result Recoding for All Steps.
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Requirements Gateway and XML Reports

    Hi,
    before reinventing the wheel once more, i would ask if anyone has already written a NI-Requierments Gateway Type that supports
    the XML-Reports based on the old Teststand 2.0 XML-Style ?
    Regards
    Juergen  
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Hi Juergen,
    thank you for using the National Instruments Forum.
    I could not find anything specific relating to your request. Maybe this document is of any help:
    Coupling NI Requirements Gateway with NI TestStand
    http://www.ni.com/white-paper/8422/en
    Regards, Topper

  • Getting a COM error when calling MenuItemExecute in batch mode

    I support an internal document management system for our corporate contracts. Among other applications, I have one that runs nightly in batch mode to store new invoices and connect them via bookmarks to their corresponding “parent” contract files. The original program was created in 2005 with Acrobat 7 (later updated to Acrobat 8) and it worked well for several years. However, a few months ago I upgraded the system to Acrobat 9 and since then the program has not run consistently.
    The “program” actually consists of a VB application and two plug-ins. The VB application does as much work as it can with IAC and the JSO bridge, but because the files are (owner) password protected one plug-in automatically applies the necessary password using AVDocDidOpen when the VB application opens the AVDoc. The VB application then also calls the other plug-in using MenuItemExecute. The second plug-in is used to create the bookmarks between the two files by grabbing info off bookmark strings and creating the necessary actions. It also applies the password to the files.
    Here is brief outline form is how this is all structured:
    pdDocParent.Open
             pdDocInvoice.Open
                     avDocParent.Open (This triggers the first plug-in to apply the password)
                             Create bookmark strings in both files using JSO bridge
                                    MenuItemExecute (To create the bookmark action in the parent)
                                    pdDocParent.Save
                            avDocParent.Close
                            avDocInvoice.Open (This triggers the first plug-in to apply the password)
                                    MenuItemExecute (To create the bookmark action in the invoice)
                                    pdDocInvoice.Save
                            avDocInvoice.Close
                    pdDocInvoice.Close
            pdDocParent.Close
    Since the upgrade, I’m getting a COM error [The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))] on a non-consistent basis when the application tries to call MenuItemExecute. When I say “non-consistent” I mean that some days the program will process several hundred files just fine. Other days it won’t process any. Then some days it will not process the first, oh, four files but will process the next 300. Usually it runs fine when started interactively, but even then the error sometimes occurs.
    I recompiled both plug-ins and the VB app using the Acrobat 9 SDK (headers for the plug-in and the Acrobat type library for the VB app) but that didn’t make any difference. I added code to check if the MenuItem is available and it is in all cases.
    After reviewing this more, I got to thinking that perhaps a race condition was the culprit—that a string hadn’t been completely written before the second plug-in tried to create an action for it. So I added some half-second pauses along the way, but that doesn’t seem to have helped, either.
    At this point the only thing I can think of is to rewrite the application as a pure plug-in. But it’s a long and involved application and if I can get the current app to work I’d prefer to do that. I tested it with Acrobat 10.1 and encountered similar problems.
    As I said, it’s been working fine up until Acrobat 9. Does anyone know of anything that might have changed with Acrobat 9 that I haven’t considered? Is there anything else I might check? Thanks.

    Leonard,
    I'd be interested in hearing why you think that because others at Adobe have told me it's OK. Acrobat is only being called by one user at a time and we've paid for a full license.
    Thanks,
    Dick

Maybe you are looking for